| Age | Commit message (Collapse) | Author |
|---|
|
The pseries hibernate code calls post_mobility_fixup() which is sort
of a dumping ground of fixups that need to run after resuming from
suspend regardless of whether suspend was a hibernation or a
migration. Calling post_mobility_fixup() from
pseries_suspend_enable_irqs() runs this code early in resume with
devices suspended and only one CPU up, while the much more commonly
used migration case runs these fixups in a more typical process
context.
Call post_mobility_fixup() after the suspend core returns a success
status to the hibernate sysfs store method and remove
pseries_suspend_enable_irqs().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-26-nathanl@linux.ibm.com
|
|
Partitions with cache nodes in the device tree can encounter the
following warning on resume:
CPU 0 already accounted in PowerPC,POWER9@0(Data)
WARNING: CPU: 0 PID: 3177 at arch/powerpc/kernel/cacheinfo.c:197 cacheinfo_cpu_online+0x640/0x820
These calls to cacheinfo_cpu_offline/online have been redundant since
commit e610a466d16a ("powerpc/pseries/mobility: rebuild cacheinfo
hierarchy post-migration").
Fixes: e610a466d16a ("powerpc/pseries/mobility: rebuild cacheinfo hierarchy post-migration")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-25-nathanl@linux.ibm.com
|
|
rtas_suspend_last_cpu() is now unused, remove it and
__rtas_suspend_last_cpu() which also becomes unused.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-24-nathanl@linux.ibm.com
|
|
rtas_suspend_last_cpu() and related code perform a lot of work that
isn't relevant to the hibernation workflow. All other CPUs are offline
when called so there is no need to place them in H_JOIN or prod them
on resume, nor is there need for retries or operations on shared
state.
Call the rtas_ibm_suspend_me() wrapper function directly from
pseries_suspend_enter() instead of using rtas_suspend_last_cpu().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-23-nathanl@linux.ibm.com
|
|
rtas_suspend_cpu() no longer has users; remove it and
__rtas_suspend_cpu() which now becomes unused as well.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-22-nathanl@linux.ibm.com
|
|
There are no users left of the suspend_disable_cpu() callback, remove
it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-21-nathanl@linux.ibm.com
|
|
Since commit 48f6e7f6d948 ("powerpc/pseries: remove cede offline state
for CPUs"), ppc_md.suspend_disable_cpu() is no longer used and all
CPUs (save one) are placed into true offline state as opposed to
H_JOIN. So pseries_suspend_cpu() is effectively unused; remove it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-20-nathanl@linux.ibm.com
|
|
There is no need for the stream id to be a file-global variable; pass
it from hibernate_store() to pseries_suspend_begin() for the
H_VASI_STATE call.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-19-nathanl@linux.ibm.com
|
|
There are three ways pseries_suspend_begin() can be reached:
1. When "mem" is written to /sys/power/state:
kobj_attr_store()
-> state_store()
-> pm_suspend()
-> suspend_devices_and_enter()
-> pseries_suspend_begin()
This never works because there is no way to supply a valid stream id
using this interface, and H_VASI_STATE is called with a stream id of
zero. So this call path is useless at best.
2. When a stream id is written to /sys/devices/system/power/hibernate.
pseries_suspend_begin() is polled directly from store_hibernate()
until the stream is in the "Suspending" state (i.e. the platform is
ready for the OS to suspend execution):
dev_attr_store()
-> store_hibernate()
-> pseries_suspend_begin()
3. When a stream id is written to /sys/devices/system/power/hibernate
(continued). After #2, pseries_suspend_begin() is called once again
from the pm core:
dev_attr_store()
-> store_hibernate()
-> pm_suspend()
-> suspend_devices_and_enter()
-> pseries_suspend_begin()
This is redundant because the VASI suspend state is already known to
be Suspending.
The begin() callback of platform_suspend_ops is optional, so we can
simply remove that assignment with no loss of function.
Fixes: 32d8ad4e621d ("powerpc/pseries: Partition hibernation support")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-18-nathanl@linux.ibm.com
|
|
rtas_ibm_suspend_me_unsafe() is now unused; remove it and
rtas_percpu_suspend_me() which becomes unused as a result.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-17-nathanl@linux.ibm.com
|
|
sys_rtas() cannot call ibm,suspend-me directly in the same way it
handles other inputs. Instead it must dispatch the request to code
that can first perform the H_JOIN sequence before any call to
ibm,suspend-me can succeed. Over time kernel/rtas.c has accreted a fair
amount of platform-specific code to implement this.
Since a different, more robust implementation of the suspend sequence
is now in the pseries platform code, we want to dispatch the request
there.
Note that invoking ibm,suspend-me via the RTAS syscall is all but
deprecated; this change preserves ABI compatibility for old programs
while providing to them the benefit of the new partition suspend
implementation. This is a behavior change in that the kernel performs
the device tree update and firmware activation before returning, but
experimentation indicates this is tolerated fine by legacy user space.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-16-nathanl@linux.ibm.com
|
|
This is a mitigation for the relatively rare occurrence where a
virtual IOA can be in a transient state that prevents the
suspend/migration from succeeding, resulting in an error from
ibm,suspend-me.
If the join/suspend sequence returns an error, it is acceptable to
retry as long as the VASI suspend session state is still
"Suspending" (i.e. the platform is still waiting for the OS to
suspend).
Retry a few times on suspend failure while this condition holds,
progressively increasing the delay between attempts. We don't want to
retry indefinitey because firmware emits an error log event on each
unsuccessful attempt.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-15-nathanl@linux.ibm.com
|
|
If we're returning an error to user space, use H_VASI_SIGNAL to send a
cancellation request to the platform. This isn't strictly required but
it communicates that Linux will not attempt to complete the suspend,
which allows the various entities involved to promptly end the
operation in progress.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-14-nathanl@linux.ibm.com
|
|
The partition suspend sequence as specified in the platform
architecture requires that all active processor threads call
H_JOIN, which:
- suspends the calling thread until it is the target of
an H_PROD; or
- immediately returns H_CONTINUE, if the calling thread is the last to
call H_JOIN. This thread is expected to call ibm,suspend-me to
completely suspend the partition.
Upon returning from ibm,suspend-me the calling thread must wake all
others using H_PROD.
rtas_ibm_suspend_me_unsafe() uses on_each_cpu() to implement this
protocol, but because of its synchronizing nature this is susceptible
to deadlock versus users of stop_machine() or other callers of
on_each_cpu().
Not only is stop_machine() intended for use cases like this, it
handles error propagation and allows us to keep the data shared
between CPUs minimal: a single atomic counter which ensures exactly
one CPU will wake the others from their joined states.
Switch the migration code to use stop_machine() and a less complex
local implementation of the H_JOIN/ibm,suspend-me logic, which
carries additional benefits:
- more informative error reporting, appropriately ratelimited
- resets the lockup detector / watchdog on resume to prevent lockup
warnings when the OS has been suspended for a time exceeding the
threshold.
Fixes: 91dc182ca6e2 ("[PATCH] powerpc: special-case ibm,suspend-me RTAS call")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-13-nathanl@linux.ibm.com
|
|
The behavior of rtas_ibm_suspend_me_unsafe() is to return -EAGAIN to
the caller until the specified VASI suspend session state makes the
transition from H_VASI_ENABLED to H_VASI_SUSPENDING. In the interest
of separating concerns to prepare for a new implementation of the
join/suspend sequence, extract VASI session polling logic into a
couple of local functions. Waiting for the session state to reach
H_VASI_SUSPENDING before calling rtas_ibm_suspend_me_unsafe() ensures
that we will never get an EAGAIN result necessitating a retry. No
user-visible change in behavior is intended.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-12-nathanl@linux.ibm.com
|
|
It's incorrect to abort post-suspend processing if
ibm,activate-firmware isn't available. Use rtas_activate_firmware(),
which logs this condition appropriately and allows us to proceed.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-11-nathanl@linux.ibm.com
|
|
- Convert printk(KERN_ERR) to pr_err().
- Include errno in property update failure message.
- Remove reference to "Post-mobility" from device tree update message:
with pr_err() it will have a "mobility:" prefix.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-10-nathanl@linux.ibm.com
|
|
update_dt_node() has a switch statement where the default case lacks a
break statement.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-9-nathanl@linux.ibm.com
|
|
Treat the absence of the ibm,update-nodes function as benign instead
of reporting an error. If the platform does not provide that facility,
it's not a problem for Linux.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-8-nathanl@linux.ibm.com
|
|
H_VASI_SIGNAL can be used by a partition to request cancellation of
its migration. To be used in future changes.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-7-nathanl@linux.ibm.com
|
|
Provide a documented wrapper function for the ibm,activate-firmware
service, which must be called after a partition migration or
hibernation.
If the function is absent or the call fails, the OS will continue to
run normally with the current firmware, so there is no need to perform
any recovery. Just log it and continue.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-6-nathanl@linux.ibm.com
|
|
Now that the name is available, provide a simple wrapper for
ibm,suspend-me which returns both a Linux errno and optionally the
actual RTAS status to the caller.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-5-nathanl@linux.ibm.com
|
|
The pseries partition suspend sequence requires that all active CPUs
call H_JOIN, which suspends all but one of them with interrupts
disabled. The "chosen" CPU is then to call ibm,suspend-me to complete
the suspend. Upon returning from ibm,suspend-me, the chosen CPU is to
use H_PROD to wake the joined CPUs.
Using on_each_cpu() for this, as rtas_ibm_suspend_me() does to
implement partition migration, is susceptible to deadlock with other
users of on_each_cpu() and with users of stop_machine APIs. The
callback passed to on_each_cpu() is not allowed to synchronize with
other CPUs in the way it is used here.
Complicating the fix is the fact that rtas_ibm_suspend_me() also
occupies the function name that should be used to provide a more
conventional wrapper for ibm,suspend-me. Rename rtas_ibm_suspend_me()
to rtas_ibm_suspend_me_unsafe() to free up the name and indicate that
it should not gain users.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-4-nathanl@linux.ibm.com
|
|
We don't completely account for the possible return codes for
ibm,suspend-me. Add definitions for these.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-3-nathanl@linux.ibm.com
|
|
While drmgr has had work in some areas to make its RTAS syscall
interactions endian-neutral, its code for performing partition
migration via the syscall has never worked on LE. While it is able to
complete ibm,suspend-me successfully, it crashes when attempting the
subsequent ibm,update-nodes call.
drmgr is the only known (or plausible) user of ibm,suspend-me,
ibm,update-nodes, and ibm,update-properties, so allow them only in
big-endian configurations.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201207215200.1785968-2-nathanl@linux.ibm.com
|
|
This partially reverts commit eb232b162446 ("powerpc/book3s64/kuap: Improve
error reporting with KUAP") and update the fault handler to print
[ 55.022514] Kernel attempted to access user page (7e6725b70000) - exploit attempt? (uid: 0)
[ 55.022528] BUG: Unable to handle kernel data access on read at 0x7e6725b70000
[ 55.022533] Faulting instruction address: 0xc000000000e8b9bc
[ 55.022540] Oops: Kernel access of bad area, sig: 11 [#1]
....
when the kernel access userspace address without unlocking AMR.
bad_kuap_fault() is added as part of commit 5e5be3aed230 ("powerpc/mm: Detect
bad KUAP faults") to catch userspace access incorrectly blocked by AMR. Hence
retain the full stack dump there even with hash translation. Also, add a comment
explaining the difference between hash and radix.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201208031539.84878-1-aneesh.kumar@linux.ibm.com
|
|
The ARM version of __div64_32() encapsulates a call to __do_div64 with
non-standard argument passing. In particular, __n is a 64-bit input
argument assigned to r0-r1 and __rem is an output argument sharing half
of that r0-r1 register pair.
With __n being an input argument, the compiler is in its right to
presume that r0-r1 would still hold the value of __n past the inline
assembly statement. Normally, the compiler would have assigned non
overlapping registers to __n and __rem if the value for __n is needed
again.
However, here we enforce our own register assignment and gcc fails to
notice the conflict. In practice this doesn't cause any problem as __n
is considered dead after the asm statement and *n is overwritten.
However this is not always guaranteed and clang rightfully complains.
Let's fix it properly by making __n into an input-output variable. This
makes it clear that those registers representing __n have been modified.
Then we can extract __rem as the high part of __n with plain C code.
This asm constraint "abuse" was likely relied upon back when gcc didn't
handle 64-bit values optimally. Turns out that gcc is now able to
optimize things and produces the same code with this patch applied.
Reported-by: Antony Yu <swpenim@gmail.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
There are a couple of problems with the exception entry code that deals
with FP exceptions (which are reported as UND exceptions) when building
the kernel in Thumb2 mode:
- the conditional branch to vfp_kmode_exception in vfp_support_entry()
may be out of range for its target, depending on how the linker decides
to arrange the sections;
- when the UND exception is taken in kernel mode, the emulation handling
logic is entered via the 'call_fpe' label, which means we end up using
the wrong value/mask pairs to match and detect the NEON opcodes.
Since UND exceptions in kernel mode are unlikely to occur on a hot path
(as opposed to the user mode version which is invoked for VFP support
code and lazy restore), we can use the existing undef hook machinery for
any kernel mode instruction emulation that is needed, including calling
the existing vfp_kmode_exception() routine for unexpected cases. So drop
the call to call_fpe, and instead, install an undef hook that will get
called for NEON and VFP instructions that trigger an UND exception in
kernel mode.
While at it, make sure that the PC correction is accurate for the
execution mode where the exception was taken, by checking the PSR
Thumb bit.
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Fixes: eff8728fe698 ("vmlinux.lds.h: Add PGO and AutoFDO input sections")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
This patch replaces 6 IWMMXT instructions Clang's integrated assembler
does not support in iwmmxt.S using macros, while making sure GNU
assembler still emit the same instructions. This should be easier than
providing full IWMMXT support in Clang. This is one of the last bits of
kernel code that could be compiled but not assembled with clang. Once
all of it works with IAS, we no longer need to special-case 32-bit Arm
in Kbuild, or turn off CONFIG_IWMMXT when build-testing.
"Intel Wireless MMX Technology - Developer Guide - August, 2002" should
be referenced for the encoding schemes of these extensions.
Link: https://github.com/ClangBuiltLinux/linux/issues/975
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jian Cai <jiancai@google.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
KASAN uses the routines in stacktrace.c to capture the call stack each
time memory gets allocated or freed. Some of these routines are also
used to log CPU and memory context when exceptions are taken, and so
in some cases, memory accesses may be made that are not strictly in
line with the KASAN constraints, and may therefore trigger false KASAN
positives.
So follow the example set by other architectures, and simply disable
KASAN instrumentation for these routines.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Since
commit 0bddd227f3dc ("Documentation: update for gcc 4.9 requirement")
the minimum supported version of GCC is gcc-4.9. It's now safe to remove
this code.
Link: https://github.com/ClangBuiltLinux/linux/issues/427
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
LLD does not yet support any big endian architectures. Make this config
non-selectable when using LLD until LLD is fixed.
Link: https://github.com/ClangBuiltLinux/linux/issues/965
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
After having collected the majority of reports about MSRs being written
by userspace tools and what tools those are, and all newer reports
mostly repeating, add an URL where detailed information is gathered and
kept up-to-date.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201205002825.19107-1-bp@alien8.de
|
|
Since commit c33165253492 ("powerpc: use non-set_fs based maccess
routines"), userspace access is not granted anymore when using
copy_from_kernel_nofault()
However, kthread_probe_data() uses copy_from_kernel_nofault()
to check validity of pointers. When the pointer is NULL,
it points to userspace, leading to a KUAP fault and triggering
the following big hammer warning many times when you request
a sysrq "show task":
[ 1117.202054] ------------[ cut here ]------------
[ 1117.202102] Bug: fault blocked by AP register !
[ 1117.202261] WARNING: CPU: 0 PID: 377 at arch/powerpc/include/asm/nohash/32/kup-8xx.h:66 do_page_fault+0x4a8/0x5ec
[ 1117.202310] Modules linked in:
[ 1117.202428] CPU: 0 PID: 377 Comm: sh Tainted: G W 5.10.0-rc5-01340-g83f53be2de31-dirty #4175
[ 1117.202499] NIP: c0012048 LR: c0012048 CTR: 00000000
[ 1117.202573] REGS: cacdbb88 TRAP: 0700 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty)
[ 1117.202625] MSR: 00021032 <ME,IR,DR,RI> CR: 24082222 XER: 20000000
[ 1117.202899]
[ 1117.202899] GPR00: c0012048 cacdbc40 c2929290 00000023 c092e554 00000001 c09865e8 c092e640
[ 1117.202899] GPR08: 00001032 00000000 00000000 00014efc 28082224 100d166a 100a0920 00000000
[ 1117.202899] GPR16: 100cac0c 100b0000 1080c3fc 1080d685 100d0000 100d0000 00000000 100a0900
[ 1117.202899] GPR24: 100d0000 c07892ec 00000000 c0921510 c21f4440 0000005c c0000000 cacdbc80
[ 1117.204362] NIP [c0012048] do_page_fault+0x4a8/0x5ec
[ 1117.204461] LR [c0012048] do_page_fault+0x4a8/0x5ec
[ 1117.204509] Call Trace:
[ 1117.204609] [cacdbc40] [c0012048] do_page_fault+0x4a8/0x5ec (unreliable)
[ 1117.204771] [cacdbc70] [c00112f0] handle_page_fault+0x8/0x34
[ 1117.204911] --- interrupt: 301 at copy_from_kernel_nofault+0x70/0x1c0
[ 1117.204979] NIP: c010dbec LR: c010dbac CTR: 00000001
[ 1117.205053] REGS: cacdbc80 TRAP: 0301 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty)
[ 1117.205104] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28082224 XER: 00000000
[ 1117.205416] DAR: 0000005c DSISR: c0000000
[ 1117.205416] GPR00: c0045948 cacdbd38 c2929290 00000001 00000017 00000017 00000027 0000000f
[ 1117.205416] GPR08: c09926ec 00000000 00000000 3ffff000 24082224
[ 1117.206106] NIP [c010dbec] copy_from_kernel_nofault+0x70/0x1c0
[ 1117.206202] LR [c010dbac] copy_from_kernel_nofault+0x30/0x1c0
[ 1117.206258] --- interrupt: 301
[ 1117.206372] [cacdbd38] [c004bbb0] kthread_probe_data+0x44/0x70 (unreliable)
[ 1117.206561] [cacdbd58] [c0045948] print_worker_info+0xe0/0x194
[ 1117.206717] [cacdbdb8] [c00548ac] sched_show_task+0x134/0x168
[ 1117.206851] [cacdbdd8] [c005a268] show_state_filter+0x70/0x100
[ 1117.206989] [cacdbe08] [c039baa0] sysrq_handle_showstate+0x14/0x24
[ 1117.207122] [cacdbe18] [c039bf18] __handle_sysrq+0xac/0x1d0
[ 1117.207257] [cacdbe48] [c039c0c0] write_sysrq_trigger+0x4c/0x74
[ 1117.207407] [cacdbe68] [c01fba48] proc_reg_write+0xb4/0x114
[ 1117.207550] [cacdbe88] [c0179968] vfs_write+0x12c/0x478
[ 1117.207686] [cacdbf08] [c0179e60] ksys_write+0x78/0x128
[ 1117.207826] [cacdbf38] [c00110d0] ret_from_syscall+0x0/0x34
[ 1117.207938] --- interrupt: c01 at 0xfd4e784
[ 1117.208008] NIP: 0fd4e784 LR: 0fe0f244 CTR: 10048d38
[ 1117.208083] REGS: cacdbf48 TRAP: 0c01 Tainted: G W (5.10.0-rc5-01340-g83f53be2de31-dirty)
[ 1117.208134] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 44002222 XER: 00000000
[ 1117.208470]
[ 1117.208470] GPR00: 00000004 7fc34090 77bfb4e0 00000001 1080fa40 00000002 7400000f fefefeff
[ 1117.208470] GPR08: 7f7f7f7f 10048d38 1080c414 7fc343c0 00000000
[ 1117.209104] NIP [0fd4e784] 0xfd4e784
[ 1117.209180] LR [0fe0f244] 0xfe0f244
[ 1117.209236] --- interrupt: c01
[ 1117.209274] Instruction dump:
[ 1117.209353] 714a4000 418200f0 73ca0001 40820084 73ca0032 408200f8 73c90040 4082ff60
[ 1117.209727] 0fe00000 3c60c082 386399f4 48013b65 <0fe00000> 80010034 3860000b 7c0803a6
[ 1117.210102] ---[ end trace 1927c0323393af3e ]---
To avoid that, copy_from_kernel_nofault_allowed() is used to check
whether the address is a valid kernel address. But the default
version of it returns true for any address.
Provide a powerpc version of copy_from_kernel_nofault_allowed()
that returns false when the address is below TASK_USER_MAX,
so that copy_from_kernel_nofault() will return -ERANGE.
Fixes: c33165253492 ("powerpc: use non-set_fs based maccess routines")
Reported-by: Qian Cai <qcai@redhat.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/18bcb456d32a3e74f5ae241fd6f1580c092d07f5.1607360230.git.christophe.leroy@csgroup.eu
|
|
The Xtensa time code is not a clock provider, and just needs to call
of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20201110155117.3286247-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The SuperH/J2 DT platform code is not a clock provider, and just needs
to call of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201110155029.3286090-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
egisters. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.
Fixes: 2cd2310fca4c ("arm64: dts: meson-g12b-ugoos-am6: add initial device-tree")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/46298e66572784c44f873f1b71cc4ab3d8fc5aa6.1607363522.git.stefan@agner.ch
|
|
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.
Fixes: ed5e8f689154 ("arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/12506964ca5d5f936579a280ad0a7e7f9a0a2d4c.1607363522.git.stefan@agner.ch
|
|
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. On similar boards with the same PHY this fixes an issue where
Ethernet link would not come up when using ip link set down/up.
Fixes: a2c6e82e5341 ("ARM: dts: meson: switch to the generic Ethernet PHY reset bindings")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # on Odroid-C1+
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/ff78772b306411e145769c46d4090554344db41e.1607363522.git.stefan@agner.ch
|
|
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. This fixes an issue seen on ODROID-C2 where the Ethernet
link doesn't come up when using ip link set down/up:
[ 6630.714855] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 6630.785775] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36)
[ 6630.893071] meson8b-dwmac c9410000.ethernet: Failed to reset the dma
[ 6630.893800] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 6630.902835] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
Fixes: f29cabf240ed ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/4a322c198b86e4c8b3dda015560a683babea4d63.1607363522.git.stefan@agner.ch
|
|
According to the datasheet (Rev. 1.9) the RTL8211F requires at least
72ms "for internal circuits settling time" before accessing the PHY
registers. This fixes an issue where the Ethernet link doesn't come up
when using ip link set down/up:
[ 29.360965] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
[ 34.569012] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
[ 34.676732] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
[ 34.678874] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[ 34.687850] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed
Fixes: 658e4129bb81 ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/df3f5c4fc6e43c55429fd3662a636036a21eed49.1607363522.git.stefan@agner.ch
|
|
Reorder the VIM/VIM2 includes/bindings to follow the format of other dts
in the Amlogic tree and remove a stray empty line in the VIM2 dts.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201203061605.9603-1-christianshewitt@gmail.com
|
|
Add initial support limited to HDMI i2s and SPDIF (LPCM).
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201203060023.9454-8-christianshewitt@gmail.com
|
|
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201203060023.9454-7-christianshewitt@gmail.com
|
|
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201203060023.9454-6-christianshewitt@gmail.com
|
|
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201203060023.9454-5-christianshewitt@gmail.com
|
|
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201203060023.9454-4-christianshewitt@gmail.com
|
|
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201203060023.9454-3-christianshewitt@gmail.com
|
|
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201203060023.9454-2-christianshewitt@gmail.com
|
|
Add "deprecated" message to any access to old /proc/sgi_uv/* leaves.
[ bp: Do not have a trailing function opening brace and the arguments
continuing on the next line and align them on the opening brace. ]
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lkml.kernel.org/r/20201128034227.120869-5-mike.travis@hpe.com
|
