summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2008-09-23x86: c1e_idle: don't mark TSC unstable if CPU has invariant TSCAndreas Herrmann
Impact: Functional TSC is marked unstable on AMD family 0x10 and 0x11 CPUs. This would be wrong because for those CPUs "invariant TSC" means: "The TSC counts at the same rate in all P-states, all C states, S0, or S1" (See "Processor BIOS and Kernel Developer's Guides" for those CPUs.) [ tglx: Changed C1E to AMD C1E in the printks to avoid confusion with Intel C1E ] Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23x86: prevent C-states hang on AMD C1E enabled machinesThomas Gleixner
Impact: System hang when AMD C1E machines switch into C2/C3 AMD C1E enabled systems do not work with normal ACPI C-states even if the BIOS is advertising them. Limit the C-states to C1 for the ACPI processor idle code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23x86: prevent stale state of c1e_mask across CPU offline/onlineThomas Gleixner
Impact: hang which happens across CPU offline/online on AMD C1E systems. When a CPU goes offline then the corresponding bit in the broadcast mask is cleared. For AMD C1E enabled CPUs we do not reenable the broadcast when the CPU comes online again as we do not clear the corresponding bit in the c1e_mask, which keeps track which CPUs have been switched to broadcast already. So on those !$@#& machines we never switch back to broadcasting after a CPU offline/online cycle. Clear the bit when the CPU plays dead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23x86: fix 27-rc crash on vsmp due to paravirt during module loadRavikiran G Thirumalai
27-rc fails to boot up if configured to use modules. Turns out vsmp_patch was marked __init, and vsmp_patch being the pvops 'patch' routine for vsmp, a call to vsmp_patch just turns out to execute a code page with series of 0xcc (POISON_FREE_INITMEM -- int3). vsmp_patch has been marked with __init ever since pvops, however, apply_paravirt can be called during module load causing calls to freed memory location. Since apply_paravirt can only be called during init/module load, make vsmp_patch with "__init_or_module" Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23x86: fix macro with bad_bios_dmi_tableYinghai Lu
DMI tables need a blank NULL tail. fixes the crash on Ingo's test box. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22sparc64: Fix missing devices due to PCI bridge test in of_create_pci_dev().David S. Miller
Just like in the arch/sparc64/kernel/of_device.c code fix commit 071d7f4c3b411beae08d27656e958070c43b78b4 ("sparc64: Fix SMP bootup with CONFIG_STACK_DEBUG or ftrace.") we have to check the OF device node name for "pci" instead of relying upon the 'device_type' property being there on all PCI bridges. Tested by Meelis Roos, and confirmed to make the PCI QFE devices reappear on the E3500 system. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22[IA64] kexec fails on systems with blocks of uncached memoryJay Lan
Currently a memory segment in memory map with attribute of EFI_MEMORY_UC is denoted as "System RAM" in /proc/iomem, while memory of attribute (EFI_MEMORY_WB|EFI_MEMORY_UC) is also labeled the same. The kexec utility then includes uncached memory as part of vmcore. The kdump kernel MCA'ed when it tries to save the vmcore to a disk. A normal "cached" access may cause MCAs. This patch would label memory with attribute of EFI_MEMORY_UC only as "Uncached RAM" so that kexec would know not to include it in the vmcore. I will submit a separate kexec-tools patch to the kexec list. Signed-off-by: Jay Lan <jlan@sgi.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-09-22[IA64] Ski simulator doesn't need check_sal_cache_flushAlex Chiang
Peter Chubb reported that commit 3463a93def55c309f3c0d0a8aaf216be3be42d64 (Update check_sal_cache_flush to use platform_send_ipi()) broke Ski because it does not implement IPIs. Tony Luck suggested we just #ifndef out the call (since the simulator does not have the SAL bug that this code is attempting to detect and workaround) Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-09-22iommu: remove fullflush and nofullflush in IOMMU generic optionFUJITA Tomonori
This patch against tip/x86/iommu virtually reverts 2842e5bf3115193f05dc9dac20f940e7abf44c1a. But just reverting the commit breaks AMD IOMMU so this patch also includes some fixes. The above commit adds new two options to x86 IOMMU generic kernel boot options, fullflush and nofullflush. But such change that affects all the IOMMUs needs more discussion (all IOMMU parties need the chance to discuss it): http://lkml.org/lkml/2008/9/19/106 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22x86, NMI watchdog: setup before enabling NMI watchdogAristeu Rozanski
There's a small window when NMI watchdog is being set up that if any NMIs are triggered, the NMI code will make make use of not initalized wd_ops elements: void setup_apic_nmi_watchdog(void *unused) { if (__get_cpu_var(wd_enabled)) return; /* cheap hack to support suspend/resume */ /* if cpu0 is not active neither should the other cpus */ if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0) return; switch (nmi_watchdog) { case NMI_LOCAL_APIC: /* enable it before to avoid race with handler */ --> __get_cpu_var(wd_enabled) = 1; --> if (lapic_watchdog_init(nmi_hz) < 0) { (...) asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs) { (...) if (nmi_watchdog_tick(regs, reason)) return; (...) notrace __kprobes int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) { (...) if (!__get_cpu_var(wd_enabled)) return rc; switch (nmi_watchdog) { case NMI_LOCAL_APIC: rc |= lapic_wd_event(nmi_hz); (...) int lapic_wd_event(unsigned nmi_hz) { struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); u64 ctr; --> rdmsrl(wd->perfctr_msr, ctr); and wd->*_msr will be initialized on each processor type specific setup, after enabling NMIs for PMIs. Since the counter was just set, the chances of an performance counter generated NMI is minimal, but any other unknown NMI would trigger the problem. This patch fixes the problem by setting everything up before enabling performance counter generated NMIs and will set wd_enabled using a callback function. Signed-off-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Acked-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22x86, NMI watchdog: when booting with reset_devices, clear the performance ↵Aristeu Rozanski
counters P4s have a quirk that makes necessary to clear P4_CCCR_OVF bit on the CCCR everytime the PMI is triggered. When booting the kernel with reset_devices (more specific kdump case), the counters reach zero and the PMI will be generated. This is not a problem on other processors but on P4s, it'll continue to generate NMIs until that bit is cleared. Since there may be other users of the performance counters, clear and disable all of them when booting with reset_devices option. We have a P4 box here that crashes because of this problem. Since the kdump kernel usually boots with only one processor active, the second logical unit won't be set up, therefore, MSR_P4_IQ_CCCR1 (and other performance counter registers) won't be cleared and P4_CCCR_OVF may be still set because the previous kernel was using this register. An NMI is triggered because of the MSR_P4_IQ_CCCR1 right after the NMI delivery is enabled, triggering the race fixed on my previous email. Signed-off-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Acked-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22iommu: export iommu_area_reserve helper functionFUJITA Tomonori
x86 has set_bit_string() that does the exact same thing that set_bit_area() in lib/iommu-helper.c does. This patch exports set_bit_area() in lib/iommu-helper.c as iommu_area_reserve(), converts GART, Calgary, and AMD IOMMU to use it. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22Blackfin arch: add dma mapping stub for musb driver portBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: use new platform data interface of musb to replace old oneBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-09-22x86: use WARN_ONCE in workaround for mtrr maskYinghai Lu
so could help catch attention about bug in bios about mtrr mask setting. WARN_ONCE got into mainline already, lets use it. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22Merge commit 'v2.6.27-rc7' into x86/debugIngo Molnar
2008-09-22x86: use platform_device_register_simple()Akinobu Mita
Cleanup pcspeaker.c Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22x86: check for ioremap() failure in copy_oldmem_page()Akinobu Mita
Add a check for ioremap() failure in copy_oldmem_page(). This patch also includes small coding style fixes. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22x86: fix CONFIG_X86_RESERVE_LOW_64K=yYinghai Lu
The bad_bios_dmi_table() quirk never triggered because we do DMI setup too late. Move it a bit earlier. Also change the CONFIG_X86_RESERVE_LOW_64K quirk to operate on the e820 table directly instead of messing with early reservations - this handles overlaps (which do occur in this low range of RAM) more gracefully. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22x86, oprofile: BUG scheduling while atomicAndrea Righi
nmi_shutdown() calls unregister_die_notifier() from an atomic context after setting preempt_disable() via get_cpu_var(): [ 1049.404154] BUG: scheduling while atomic: oprofiled/7796/0x00000002 [ 1049.404171] INFO: lockdep is turned off. [ 1049.404176] Modules linked in: oprofile af_packet rfcomm l2cap kvm_intel kvm i915 drm acpi_cpufreq cpufreq_userspace cpufreq_conservative cpufreq_ondemand cpufreq_powersave freq_table container sbs sbshc dm_mod arc4 ecb cryptomgr aead snd_hda_intel crypto_blkcipher snd_pcm_oss crypto_algapi snd_pcm iwlagn iwlcore snd_timer iTCO_wdt led_class btusb iTCO_vendor_support snd psmouse bluetooth mac80211 soundcore cfg80211 snd_page_alloc intel_agp video output button battery ac dcdbas evdev ext3 jbd mbcache sg sd_mod piix ata_piix libata scsi_mod dock tg3 libphy ehci_hcd uhci_hcd usbcore thermal processor fan fuse [ 1049.404362] Pid: 7796, comm: oprofiled Not tainted 2.6.27-rc5-mm1 #30 [ 1049.404368] Call Trace: [ 1049.404384] [<ffffffff804769fd>] thread_return+0x4a0/0x7d3 [ 1049.404396] [<ffffffff8026ad92>] generic_exec_single+0x52/0xe0 [ 1049.404405] [<ffffffff8026ae1a>] generic_exec_single+0xda/0xe0 [ 1049.404414] [<ffffffff8026aee3>] smp_call_function_single+0x73/0x150 [ 1049.404423] [<ffffffff804770c5>] schedule_timeout+0x95/0xd0 [ 1049.404430] [<ffffffff80476083>] wait_for_common+0x43/0x180 [ 1049.404438] [<ffffffff80476154>] wait_for_common+0x114/0x180 [ 1049.404448] [<ffffffff80236980>] default_wake_function+0x0/0x10 [ 1049.404457] [<ffffffff8024f810>] synchronize_rcu+0x30/0x40 [ 1049.404463] [<ffffffff8024f890>] wakeme_after_rcu+0x0/0x10 [ 1049.404472] [<ffffffff80479ca0>] _spin_unlock_irqrestore+0x40/0x80 [ 1049.404482] [<ffffffff80256def>] atomic_notifier_chain_unregister+0x3f/0x60 [ 1049.404501] [<ffffffffa03d8801>] nmi_shutdown+0x51/0x90 [oprofile] [ 1049.404517] [<ffffffffa03d6134>] oprofile_shutdown+0x34/0x70 [oprofile] [ 1049.404532] [<ffffffffa03d721e>] event_buffer_release+0xe/0x40 [oprofile] [ 1049.404543] [<ffffffff802bdcdd>] __fput+0xcd/0x240 [ 1049.404551] [<ffffffff802baa74>] filp_close+0x54/0x90 [ 1049.404560] [<ffffffff8023e1d1>] put_files_struct+0xb1/0xd0 [ 1049.404568] [<ffffffff8023f82f>] do_exit+0x18f/0x930 [ 1049.404576] [<ffffffff8020be03>] restore_args+0x0/0x30 [ 1049.404584] [<ffffffff80240006>] do_group_exit+0x36/0xa0 [ 1049.404592] [<ffffffff8020b7cb>] system_call_fastpath+0x16/0x1b This can be easily triggered with 'opcontrol --shutdown'. Simply move get_cpu_var() above unregister_die_notifier(). Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Acked-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22x86: use round_jiffies() for the corruption check timerArjan van de Ven
the exact timing of the corruption check isn't too important (it's once a minute timer), use round_jiffies() to align it and avoid extra wakeups. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22avr32: Use platform_driver_probe for pdc platform driverUwe Kleine-König
The probe function of the pdc platform driver lives in the init section and so a pdc device that is created after the init section is discarded probably results in an oops. Even if this cannot happen, using platform_driver_probe is cleaner. (If this can happen and should be supported the probe function must live in the devinit section instead.) Signed-off-by: Uwe Kleine-König <ukleinek@strlen.de> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22avr32: Use platform_driver_probe for pio platform driverUwe Kleine-König
The probe function of the pio platform driver lives in the init section and so a pio device that is created after the init section is discarded probably results in an oops. Even if this cannot happen, using platform_driver_probe is cleaner. (If this can happen and should be supported the probe function must live in the devinit section instead.) Signed-off-by: Uwe Kleine-König <ukleinek@strlen.de> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22avr32: Provide a way to deselect pins in the portmuxHaavard Skinnemoen
Currently, setting up the portmux is completely one-shot: Once a pin is muxed, the portmux driver will complain loudly and refuse to do anything if you try to set up the same pin again. Sometimes, it may be necessary to change the configuration of a pin after it has been set up initially. This patch adds a way to undo the previous configuration, allowing the pin to be reconfigured. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22ngw100: export J15 through sysfsDavid Brownell
The NGW100 board has jumper J15 (near the reset button) which is unused. This patch exports it through the GPIO sysfs support (as /sys/class/gpio/gpio62/value) so that it's easily queried by boot scripts or whatever might want to know if the jumper has been installed (value = 0) or not (value = 1, "default"). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> [haavard.skinnemoen@atmel.com: add missing include] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22avr32: Allow fine-grained control over LCDC pinsJulien May
This replaces the pin_config param with an u64 pin_mask in at32_add_device_lcdc, allowing a board-maintainer to indivually select specific lcdc pins. Signed-off-by: Alex Raimondi <raimondi@miromico.ch> Signed-off-by: Julien May <jmay@miromico.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22avr32: added mem kernel command line option supportMarco Stornelli
Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22Add kernel support for oprofile callgraphs on AVR32Nikolaus Voss
This patch adds backtracing capability to oprofile profiling in kernel and user mode on AVR32. This is done by going through the frames on the stack and adding oprofile traces for all return addresses. The code being profiled has to be compiled with frame pointers to make this work. Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22avr32: use the new byteorder headersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> [haavard.skinnemoen@atmel.com: fix <mach/io.h> build breakage] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-21[ARM] 5265/3: [AT91] Add copyright infoAndrew Victor
Add copyright information for some of the AT91 header files. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-21[ARM] 5264/2: [AT91] Suspend-to-RAM disables main oscillatorAndrew Victor
This patch adds support for a low(er)-power suspend-to-RAM. In addition to the SDRAM being put into self-refresh mode, the Master Clock is set to the Slow-clock rate (32Khz) and PLLA & PLLB are disabled. Certain peripherals are therefore also disabled, and thus cannot be used as wakeup sources. This patch has been included in the AT91 patches in various forms since 2.6.19 and a number of people have worked or commented on it, most notably: Savin Zlobec (for the original AT91RM9200 support) Anti Sullin (for the SAM9260 version) David Brownell, etc. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-21[ARM] 5263/2: [AT91] GPIO buttons as wakeup sourcesAndrew Victor
Allow the various GPIO-connected buttons to be used as wakeup sources. Also enable the internal GPIO pullup. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-21[ARM] 5262/2: [AT91] Support for GPIO-connected buttons on SAM9260-EK boardAndrew Victor
Add support or the GPIO-connected buttons on the Atmel AT91SAM9260-EK board. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-21[ARM] 5260/1: [AT91] Touchscreen on AT91SAM9RLAndrew Victor
This patch adds initialization of the Touchscreen controller for the AT91SAM9RL processor. Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Dan Liang <dan.liang@atmel.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-21[ARM] 5259/2: [AT91] PWM LEDs on AT91SAM9263-EKAndrew Victor
Use the PWM controller and leds-atmel-pwm.c driver to drive a LED on the Atmel AT91SAM9263-EK board. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-21[ARM] 5258/1: [AT91] PWM controller initializationAndrew Victor
Add platform_devices and configuration of the PWM controller found on Atmel AT91CAP9, SAM9263 and SAM9RL processors. SAM9263 support by Sedji Gaouaou. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-21[ARM] 5257/2: [AT91] Use SZ_ definitions and MTDPART_OFS_NXTBLK instead of ↵Andrew Victor
hex-values In the various AT91 board files, replace hard-coded size values (eg, 0x800000) with the SZ_ size definitions (eg, SZ_8M) from sizes.h Also replace MTD partition offsets with MTDPART_OFS_NXTBLK. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-21Merge branch 'kvm-updates/2.6.27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: ia64: 'struct fdesc' build fix
2008-09-21[MIPS] vmlinux.lds.S: handle .text.*Atsushi Nemoto
The -ffunction-sections puts each text in .text.function_name section. Without this patch, most functions are placed outside _text..._etext area and it breaks show_stacktrace(), etc. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-21[MIPS] Fix potential latency problem due to non-atomic cpu_wait.Atsushi Nemoto
If an interrupt happened between checking of NEED_RESCHED and WAIT instruction, adjust EPC to restart from checking of NEED_RESCHED. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-21[MIPS] SMTC: Clear TIF_FPUBOUND on clone / fork.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-21[MIPS] Fix 64-bit IP checksum codeAtsushi Nemoto
Use unsigned loads to avoid possible misscalculation of IP checksums. This bug was instruced in f761106cd728bcf65b7fe161b10221ee00cf7132 (lmo) / ed99e2bc1dc5dc54eb5a019f4975562dbef20103 (kernel.org). [Original fix by Atsushi. Improved instruction scheduling and fix for unaligned unsigned load by me -- Ralf] Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-21sparc: arch/sparc/kernel/pmc.c -- extra #include?David Brownell
I have no SPARC compiler handy to verify, but it looks like this is another file that doesn't need <linux/miscdevices.h> ... Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-20sparc64: Fix disappearing PCI devices on e3500.David S. Miller
Based upon a bug report by Meelis Roos. The OF device layer builds properties by matching bus types and applying 'range' properties as appropriate, up to the root. The match for "PCI" busses is looking at the 'device_type' property, and this does work %99 of the time. But on an E3500 system with a PCI QFE card, the DEC 21153 bridge sitting above the QFE network interface devices has a 'name' of "pci", but it completely lacks a 'device_type' property. So we don't match it as a PCI bus, and subsequently we end up with no resource values at all for the devices sitting under that DEC bridge. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19sparc32: Add more extensive documentation of sun4m interrupts.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19sparc32: Kill irq_rcvreg from sun4m_irq.cDavid S. Miller
Unused. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19sparc32: Delete master_l10_limit.David S. Miller
It is only set, never used. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19sparc32: Use PROM device probing for sun4c timers.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19sparc32: Use PROM device probing for sun4c interrupt register.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-19sparc32: Delete claim_ticker14().David S. Miller
No more users. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-24 08:42:02 +0000