| Age | Commit message (Collapse) | Author |
|---|
|
The compatible should be 98dx4251 not 98dx4521.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
The hashtable and guarding spinlock are global data structures,
we can inititalize them statically.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170124212116.4568-1-david@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Nested_vmx_run is split into two parts: the part that handles the
VMLAUNCH/VMRESUME instruction, and the part that modifies the vcpu state
to transition from VMX root mode to VMX non-root mode. The latter will
be used when restoring the checkpointed state of a vCPU that was in VMX
operation when a snapshot was taken.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The checks performed on the contents of the vmcs12 are extracted from
nested_vmx_run so that they can be used to validate a vmcs12 that has
been restored from a checkpoint.
Signed-off-by: Jim Mattson <jmattson@google.com>
[Change prepare_vmcs02 and nested_vmx_load_cr3's last argument to u32,
to match check_vmentry_postreqs. Update comments for singlestep
handling. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Perform the checks on vmcs12 state early, but defer the gpa->hpa lookups
until after prepare_vmcs02. Later, when we restore the checkpointed
state of a vCPU in guest mode, we will not be able to do the gpa->hpa
lookups when the restore is done.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Handle_vmptrld is split into two parts: the part that handles the
VMPTRLD instruction, and the part that establishes the current VMCS
pointer. The latter will be used when restoring the checkpointed state
of a vCPU that had a valid VMCS pointer when a snapshot was taken.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Handle_vmon is split into two parts: the part that handles the VMXON
instruction, and the part that modifies the vcpu state to transition
from legacy mode to VMX operation. The latter will be used when
restoring the checkpointed state of a vCPU that was in VMX operation
when a snapshot was taken.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Split prepare_vmcs12 into two parts: the part that stores the current L2
guest state and the part that sets up the exit information fields. The
former will be used when checkpointing the vCPU's VMX state.
Modify prepare_vmcs02 so that it can construct a vmcs02 midway through
L2 execution, using the checkpointed L2 guest state saved into the
cached vmcs12 above.
Signed-off-by: Jim Mattson <jmattson@google.com>
[Rebasing: add from_vmentry argument to prepare_vmcs02 instead of using
vmx->nested.nested_run_pending, because it is no longer 1 at the
point prepare_vmcs02 is called. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since bf9f6ac8d749 ("KVM: Update Posted-Interrupts Descriptor when vCPU
is blocked", 2015-09-18) the posted interrupt descriptor is checked
unconditionally for PIR.ON. Therefore we don't need KVM_REQ_EVENT to
trigger the scan and, if NMIs or SMIs are not involved, we can avoid
the complicated event injection path.
Calling kvm_vcpu_kick if PIR.ON=1 is also useless, though it has been
there since APICv was introduced.
However, without the KVM_REQ_EVENT safety net KVM needs to be much
more careful about races between vmx_deliver_posted_interrupt and
vcpu_enter_guest. First, the IPI for posted interrupts may be issued
between setting vcpu->mode = IN_GUEST_MODE and disabling interrupts.
If that happens, kvm_trigger_posted_interrupt returns true, but
smp_kvm_posted_intr_ipi doesn't do anything about it. The guest is
entered with PIR.ON, but the posted interrupt IPI has not been sent
and the interrupt is only delivered to the guest on the next vmentry
(if any). To fix this, disable interrupts before setting vcpu->mode.
This ensures that the IPI is delayed until the guest enters non-root mode;
it is then trapped by the processor causing the interrupt to be injected.
Second, the IPI may be issued between kvm_x86_ops->sync_pir_to_irr(vcpu)
and vcpu->mode = IN_GUEST_MODE. In this case, kvm_vcpu_kick is called
but it (correctly) doesn't do anything because it sees vcpu->mode ==
OUTSIDE_GUEST_MODE. Again, the guest is entered with PIR.ON but no
posted interrupt IPI is pending; this time, the fix for this is to move
the RVI update after IN_GUEST_MODE.
Both issues were mostly masked by the liberal usage of KVM_REQ_EVENT,
though the second could actually happen with VT-d posted interrupts.
In both race scenarios KVM_REQ_EVENT would cancel guest entry, resulting
in another vmentry which would inject the interrupt.
This saves about 300 cycles on the self_ipi_* tests of vmexit.flat.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Calls to apic_find_highest_irr are scanning IRR twice, once
in vmx_sync_pir_from_irr and once in apic_search_irr. Change
sync_pir_from_irr to get the new maximum IRR from kvm_apic_update_irr;
now that it does the computation, it can also do the RVI write.
In order to avoid complications in svm.c, make the callback optional.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add return value to __kvm_apic_update_irr/kvm_apic_update_irr.
Move vmx_sync_pir_to_irr around.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vcpu_run calls kvm_vcpu_running, not kvm_arch_vcpu_runnable,
and the former does not call check_nested_events.
Once KVM_REQ_EVENT is removed from the APICv interrupt injection
path, however, this would leave no place to trigger a vmexit
from L2 to L1, causing a missed interrupt delivery while in guest
mode. This is caught by the "ack interrupt on exit" test in
vmx.flat.
[This does not change the calls to check_nested_events in
inject_pending_event. That is material for a separate cleanup.]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pending interrupts might be in the PI descriptor when the
LAPIC is restored from an external state; we do not want
them to be injected.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As in the SVM patch, the guest physical address is passed by
VMX to x86_emulate_instruction already, so mark the GPA as available
in vcpu->arch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that we have XZR-safe helpers for fiddling with registers, use these
in the arm64 kprobes code rather than open-coding the logic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In emulate_mrs() we may erroneously write back to the user SP rather
than XZR if we trap an MRS instruction where Xt == 31.
Use the new pt_regs_write_reg() helper to handle this correctly.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 77c97b4ee21290f5 ("arm64: cpufeature: Expose CPUID registers by emulation")
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Currently we hand-roll XZR-safe register handling in
user_cache_maint_handler(), though we forget to do the same in
ctr_read_handler(), and may erroneously write back to the user SP rather
than XZR.
Use the new helpers to handle these cases correctly and consistently.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 116c81f427ff6c53 ("arm64: Work around systems with mismatched cache line sizes")
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In A64, XZR and the SP share the same encoding (31), and whether an
instruction accesses XZR or SP for a particular register parameter
depends on the definition of the instruction.
We store the SP in pt_regs::regs[31], and thus when emulating
instructions, we must be careful to not erroneously read from or write
back to the saved SP. Unfortunately, we often fail to be this careful.
In all cases, instructions using a transfer register parameter Xt use
this to refer to XZR rather than SP. This patch adds helpers so that we
can more easily and consistently handle these cases.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In a randconfig build I ran into this build error:
arch/arm64/kernel/entry-ftrace.S: Assembler messages:
arch/arm64/kernel/entry-ftrace.S:101: Error: unknown mnemonic `ldr_l' -- `ldr_l x2,ftrace_trace_function'
The macro is defined in asm/assembler.h, so we should include that file.
Fixes: 829d2bd13392 ("arm64: entry-ftrace.S: avoid open-coded {adr,ldr}_l")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
With 4 levels of 16KB pages, we get this warning about the fact that we are
copying a whole page into an array that is declared as having only two pointers
for the top level of the page table:
arch/arm64/mm/mmu.c: In function 'paging_init':
arch/arm64/mm/mmu.c:528:2: error: 'memcpy' writing 16384 bytes into a region of size 16 overflows the destination [-Werror=stringop-overflow=]
This is harmless since we actually reserve a whole page in the definition of the
array that comes from, and just the extern declaration is short. The pgdir
is initialized to zero either way, so copying the actual entries here seems
like the best solution.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
This brings in two fixes for potential host crashes, from Ben
Herrenschmidt and Nick Piggin.
|
|
There are quite a few entries in asm-offests.c which look like:
DEFINE(REG, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, reg));
So define a macro to do it once.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
[mpe: Rename to STACK_PT_REGS_OFFSET for excruciating explicitness]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
A lot of entries in asm-offests.c look like this:
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
But there is a common macro, OFFSET, which makes this cleaner:
OFFSET(TI_flags, thread_info, flags)
So use it.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
physical_memsize is needed by the vpe loader code and the platform
specific code has to define it. This value will be given to the
firmware loaded with the VPE loader. I am not aware of any standard
interface or better value to provide here.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: d9ae4f18c0d2 ("MIPS: Lantiq: Activate more drivers in default configuration")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14908/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
In all the years it's been in the tree it had never been used by
anything - it would instantly trigger BUG_ON() in fs/fcntl.c due to
bogus band argument (ie. POLLIN not POLL_IN) passed to kill_fasync().
Since nobody had ever used it in ten years, let's just rip it out and be
done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
WARN_ONCE() takes a condition and a format string. We were passing a
constant string as the condition, and the function name as the format
string. It would work, but the message would be just the function name.
Fix it by just using WARN_ONCE() directly instead of if (x) WARN_ONCE().
Noticed-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We're supporting surprise hotplug on PCI slots behind root port
or PCIe switch downstream ports, which don't claim the capability
in hardware register (offset: PCIe cap + PCI_EXP_SLTCAP). PEX8718
is one of the examples. For those PCI slots, the PDC (Presence
Detection Change) event isn't reliable and the underly (skiboot)
firmware has best judgement.
This masks the PDC event when skiboot requests by "ibm,slot-broken-pdc"
property in PCI slot's device-tree node.
Reported-by: Hank Chang <hankmax0000@gmail.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: Willie Liauw <williel@supermicro.com.tw>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
After updating ppc-dis.c, ppc-opc.c and ppc.h the following changes were
made to enable compilation and working of xmon:
1. Remove all disassembler_info
2. Use xmon's printf/print_address to output data and addresses
respectively.
3. All bfd_* types and casts have been removed.
4. Optimizations related to opcd_indices have been removed.
5. The dialect is set based on cpu features.
6. PPC_OPCODE_CLASSIC is no longer supported in the new
disassembler.
7. VLE opcode parsing and printing has been stripped.
8. Coding style conventions used for those routines has
been retained and it does not match our CodingStyle.
9. The highest supported dialect is POWER9.
10. Defined ATTRIBUTE_UNUSED in ppc-dis.c.
11. Defined _(x) in ppc-dis.c.
Finally, we remove the dependency on BROKEN so that XMON_DISASSEMBLY can
be enabled again.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The following commit-ids from the binutils project were applied on the
xmon branch and relicensed with the permission of the authors under
GPLv2 for the following files:
ppc-opc.c
ppc-dis.c
ppc.h
Working off of binutils commit 65b650b4c746 we have now moved up to
binutils commit a5721ba270dd.
Some commit logs have been taken verbatim, some are summarized for ease
of understanding.
Here is a summary of the commits:
33e8d5ac613d PPC7450 New. (powerpc_opcodes): Use it in dcba.
c3d65c1ced61 New opcodes and mask
8dbcd839b1bb Instruction Sorting
91eb7075e370 (powerpc_opcodes): Fix the first two operands of dquaiq.
548b1dcfcbab ppc-opc.c (powerpc_opcodes): Remove the dcffix and dcffix.
930bb4cfae30 Support optional L form mtmsr.
de866fccd87d (powerpc_opcodes): Order and format.
19a6653ce8c6 ppc e500mc support
fa452fa6833c (ppc_cpu_t): New typedef.
c8187e1509b2 (parse_cpu): Handle -m464.
081ba1b3c08b Define. (PPC_OPERAND_FSL, PPC_OPERAND_FCR, PPC_OPERAND_UDI)
9b4e57660d38 Rename altivec_or_spe to retain_flags. Handle -mvsx and -mpower7.
899d85beadd0 (powerpc_opcodes): Enable rfci, mfpmr, mtpmr for e300.
e1c93c699b7d (extract_sprg): Correct operand range check.
2f3bb96af796 (powerpc_init_dialect): Do not set PPC_OPCODE_BOOKE
1cb0a7674666 (ppc_setup_opcodes): Remove PPC_OPCODE_NOPOWER4 test
21169fcfadfa (print_insn_powerpc): Skip insn if it is deprecated
80890a619b85 ("dcbt", "dcbtst")
0e55be1624c2 ("lfdepx", "stfdepx")
066be9f7bd8e (parse_cpu): Extend -mpower7 to accept power7 and isel instructions.
c72ab5f2c55d (powerpc_opcodes): Reorder the opcode table so that instructions
69fe9ce501f5 (ppc_parse_cpu): New function. (powerpc_init_dialect)
e401b04ca7cd (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and E500MC entries.
70dc4e324b9a (powerpc_init_dialect): Do not choose a default dialect due to -many/-Many.
858d7a6db20b (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva", "tlbilx"
bdc7fcfe59f1 (powerpc_macros <extrdi>): Allow n+b of 64
e0d602ecffb0 (md_show_usage): Document -mpcca2
b961e85b6ebe (ppc_cpu_t): Typedef to uint64_t
8765b5569284 (powerpc_opcodes): Remove support for the the "lxsdux", "lxvd2ux"
634b50f2a623 Rename "ppca2" to "a2"
9fe54b1ca1c0 (md_show_usage): Document -m476
0dc9305793c8 Add bfd_mach_ppc_e500mc64
ce3d2015b21b Define. bfd/ * archures.c (bfd_mach_ppc_titan)
cdc51b0748c4 Add -mpwr4, -mpwr5, -mpwr5x, -mpwr6 and -mpwr7
63d0fa4e9e57 Add PPC_OPCODE_E500MC for "e500mc64"
cee62821d472 New Define. ("dccci"): Enable for PPCA2
85d4ac0b3c0b Correct wclr encoding.
51b5d4a8c5e5 (powerpc_opcodes): Enable divdeu, devweu, divde, divwe, divdeuo
e01d869a3be2 (md_assemble): Emit APUinfo section for PPC_OPCODE_E500
09a8ad8d8f56 (powerpc_opcodes): Revert deprecation of mfocrf, mtcrf and mtocrf on EFS.
f2bae120dcef (PPC_OPCODE_COMMON): Expand comment.
81a0b7e2ae09 (PPCPWR2): Add PPC_OPCODE_COMMON. (powerpc_opcodes): Add "subc"
bdc70b4a03fd (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC)
7102e95e4943 (ppc_set_cpu): Cast PPC_OPCODE_xxx to ppc_cpu_t before inverting
f383de6633cb (powerpc_opcodes) [lswx,lswi,stswx,stswi]: Deprecate on E500 and E500MC
6b069ee70de3 Remove PPC_OPCODE_PPCPS
2f7f77101279 (powerpc_opcodes): Enable icswx for POWER7
989993d80a97 (insert_nbi, insert_rbx, FRAp, FRBp, FRSp, FRTp, NBI, RAX, RBX)
a08fc94222d1 <drrndq, drrndq., dtstexq, dctqpq, dctqpq., dctfixq, dctfixq.
8ebac3aae962 (ISA_V2): Define and use for relevant BO field tests
aea77599d0db Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR
b240011aba98 (disassemble_init_for_target): Handle ppc init.
d668828207c2 (powerpc_opcd_indices): Bump array size
b9c361e0ad33 Add support for PowerPC VLE.
e1dad58d73dc (has_tls_reloc, has_tls_get_addr_call, has_vle_insns, is_ppc_vle)
df7b86aa4cb6 Add check that sysdep.h has been included before
98c76446ea6b (extract_sprg): Use ALLOW8_SPRG to include VLE.
a4ebc835cbcb (powerpc_macros): Add entries for e_extlwi to e_clrlslwi
94caa966375d (has_vle_insns, is_ppc_vle): Delete
c7a8dbf91f37 Change RA to RA0
d908c8af5a1d Add necessary casts for printing integer values
03edbe3bfb93 Add/remove PPCVLE for some 32-bit insns
9f6a6cc022e1 <xnop, yield, mdoio, mdoom>: New extended mnemonics
588925d06545 <RSQ, RTQ>: Use PPC_OPERAND_GPR
8baf7b78b5d9 <"lswx">: Use RAX for the second and RBX for the third operand
e67ed0e885d6 Changed opcode for vabsdub, vabsduh, vabsduw, mviwsplt
fb048c26f19f (UIMM4, UIMM3, UIMM2, VXVA_MASK, VXVB_MASK, VXVAVB_MASK, VXVDVA_MASK
382c72e90441 (VXASHB_MASK): New define
c7a5aa9c64fc (ppc_opts) <altivec>: Use PPC_OPCODE_ALTIVEC2
ab4437c3224f <vcfpsxws>: Fix opcode spelling
62082a42b9cd "lfdp" and "stfdp" use DS offset.
776fc41826bb (ppc_parse_cpu): Update prototype
943d398f4c52 (insert_sci8, extract_sci8): Rewrite.
5817ffd1f81c New define (PPC_OPCODE_HTM/POWER8)
9f0682fe89d9 (extract_vlesi): Properly sign extend
c0637f3af686 (powerpc_init_dialect): Set default dialect to power8.
58ae08f29af8 (powerpc_opcodes): Add tdui, twui, tdu, twu, tui, tu
4f6ffcd38d90 (powerpc_init_dialect): Use ppc_parse_cpu() to set dialect
4b95cf5c0c75 Update copyright years
a47622ac1bad Allow both signed and unsigned fields in PowerPC cmpli insn
12e87fac5c76 ppc: enable msgclr and msgsnd on Power8
8514e4db84cc Don't deprecate powerpc mftb insn
db76a70026ab Power4 should treat mftb as extended mfspr mnemonic
b90efa5b79ac ChangeLog rotatation and copyright year update
c4e676f19656 powerpc: Add slbfee. instruction
27c49e9a8fc0 powerpc: Only initialise opcode indices once
4fff86c517ab DCBT_EO): New define
4bc0608a8b69 Fix some PPC assembler errors
dc302c00611b Add hwsync extended mnemonic
99a2c5612124 Remove unused MTMSRD_L macro and re-add accidentally deleted comment
11a0cf2ec0ed Allow for optional operands with non-zero default values
7b9341139a69 PPC sync instruction accepts invalid and incompatible operands
ef5a96d564a2 Remove ppc860, ppc750cl, ppc7450 insns from common ppc
43e65147c07b Remove trailing spaces in opcodes
6dca4fd141fd Add dscr and ctrl SPR mnemonics
b6518b387185 Fix compile time warnings generated when compiling with clang
36f7a9411dcd Patches for illegal ppc 500 instructions
a680de9a980e Add assembler, disassembler and linker support for power9
dd2887fc3de4 Reorder some power9 insns
b817670b52b7 Enable 2 operand form of powerpc mfcr with -many
6f2750feaf28 Copyright update for binutils
afa8d4054b8e Delete opcodes that have been removed from ISA 3.0
1178da445ad5 Accept valid one byte signed and unsigned values for the IMM8 operand
e43de63c8fd1 Fix powerpc subis range
514e58b72633 Correct "Fix powerpc subis range"
19dfcc89e8d9 Add support for new POWER ISA 3.0 instructions
1fe0971e41a4 add more extern C
026122a67044 Re-add support for lbarx, lharx, stbcx. and sthcx. insns back to the E6500 cpu
14b57c7c6a53 PowerPC VLE
6fd3a02da554 Add support for yet some more new ISA 3.0 instructions
dfdaec14b0db Fix some PowerPC VLE BFD issues and add some PowerPC VLE instructions
fd486b633e87 Modify POWER9 support to match final ISA 3.0 documentation
a5721ba270dd Disallow 3-operand cmp[l][i] for ppc64
This updates the disassembly capabilities to add support for newer
processors.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Reformat commit list for brevity]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We do them at the start of tlb flush, and we are sure a pte update will be
followed by a tlbflush. Hence we can skip the ptesync in pte update helpers.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Upgrade ppc-opc.c, ppc-dis.c and ppc.h to the versions belonging to the
following binutils commit:
65b650b4c7463f4508bed523c24ab0031a5ae5cd
* ppc-dis.c (print_insn_powerpc): Don't skip all operands after
setting skip_optional.
That is the last version of those files that were licensed under GPLv2.
This leaves the code in a state that does not compile, because the
binutils code needs to be tweaked to work in the kernel. We don't fix
that in this commit, because we want to import more binutils changes in
subsequent commits. So for now we mark XMON_DISASSEMBLY as BROKEN, so it
can't be built.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This helps us to do some optimization for application exit case, where we can
skip the DD1 style pte update sequence.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In the kernel we do follow the below sequence in different code paths.
pte = ptep_get_clear(ptep)
....
set_pte_at(ptep, pte)
We do that for mremap, autonuma protection update and softdirty clearing. This
implies our optimization to skip a tlb flush when clearing a pte update is
not valid, because for DD1 system that followup set_pte_at will be done witout
doing the required tlbflush. Fix that by always doing the dd1 style pte update
irrespective of new_pte value. In a later patch we will optimize the application
exit case.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
With radix, we can get page fault with DSISR_PROTFAULT value set in case of
PROT_NONE or autonuma mapping. The PROT_NONE case in handled by the vma check
where we consider the access bad. For autonuma we should fall through and fixup
the access mask correctly.
Without this patch we trigger the WARN_ON() on radix. This code moves that
WARN_ON() within a radix_enabled() check. I also moved the WARN_ON() outside
the if condition making it apply for all type of faults (exec/write/read). It
is also conditionalized for book3s, because BOOK3E can also get a PROTFAULT to
handle the D/I cache sync.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently xmon data-breakpoint feature is broken.
Whenever there is a watchpoint match occurs, hw_breakpoint_handler will
be called by do_break via notifier chains mechanism. If watchpoint is
registered by xmon, hw_breakpoint_handler won't find any associated
perf_event and returns immediately with NOTIFY_STOP. Similarly, do_break
also returns without notifying to xmon.
Solve this by returning NOTIFY_DONE when hw_breakpoint_handler does not
find any perf_event associated with matched watchpoint, rather than
NOTIFY_STOP, which tells the core code to continue calling the other
breakpoint handlers including the xmon one.
Cc: stable@vger.kernel.org
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The recently merged HPT (Hash Page Table) resize support broke the build
when BOOK3S_64=n (ie. 32-bit or 64-bit Book3E) and MEMORY_HOTPLUG=y:
arch/powerpc/mm/mem.o: In function `.arch_add_memory':
(.text+0x4e4): undefined reference to `.resize_hpt_for_hotplug'
Fix it by adding a dummy version.
Fixes: 438cc81a41e8 ("powerpc/pseries: Automatically resize HPT for memory hot add/remove")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Recently a new dm_op[1] hypercall was added to Xen to provide a mechanism
for restricting device emulators (such as QEMU) to a limited set of
hypervisor operations, and being able to audit those operations in the
kernel of the domain in which they run.
This patch adds IOCTL_PRIVCMD_DM_OP as gateway for __HYPERVISOR_dm_op.
NOTE: There is no requirement for user-space code to bounce data through
locked memory buffers (as with IOCTL_PRIVCMD_HYPERCALL) since
privcmd has enough information to lock the original buffers
directly.
[1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=524a98c2
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Remove duplicated include.
Fixes: 7c0f6ba682b9 ("Replace <asm/uaccess.h> with <linux/uaccess.h> globally")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Markus Elfring <elfring@users.sourceforge.net>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15213/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig. In the case of
some code where it is modular, we can extend that to also include
files that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h
The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.
Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace/add as needed.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
Build coverage of all the mips defconfigs revealed the module.h
header was masking a couple of implicit include instances, so
we add the appropriate headers there.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Daney <david.daney@cavium.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Steven J. Hill" <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15131/
[james.hogan@imgtec.com: Preserve sort order where it already exists]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Unify definitions for MIPS performance counter register fields in
mipsregs.h rather than duplicating them in perf_events and oprofile.
This will allow future patches to use them to expose performance
counters to KVM guests.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Robert Richter <rric@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: oprofile-list@lists.sf.net
Patchwork: https://patchwork.linux-mips.org/patch/15212/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Disable stack checking on MIPS kernels. Some distribution toolchains
might pass the -fstack-check option to gcc. This results in a
store-doubleword instruction being emitted at the top of all
functions that checks the available stack space. E.g.,
a80000000001d740 <per_cpu_init>:
a80000000001d740: ffa0bfc0 sd zero,-16448(sp)
a80000000001d744: 2405ffc9 li a1,-55
a80000000001d748: 67bdffc0 daddiu sp,sp,-64
Generally, this is undesirable, and especially on the SGI IP27
platform, it will trigger a NULL pointer dereference in
'_raw_spin_lock_irq' during early init.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Suggested-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15132/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Add all the necessary platform code to initialize the dwc3
USB host controller. This code initializes the clocks and
performs a reset on the USB core and PHYs. The driver code
in 'drivers/usb/dwc3' is where the real driver lives.
Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15108/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
The build of tilegx allmodconfig fails with:
../arch/tile/include/asm/div64.h:5:15: error: unknown type name 'u64'
static inline u64 mul_u32_u32(u32 a, u32 b)
^~~
../arch/tile/include/asm/div64.h:5:31: error: unknown type name 'u32'
static inline u64 mul_u32_u32(u32 a, u32 b)
^~~
../arch/tile/include/asm/div64.h:5:38: error: unknown type name 'u32'
static inline u64 mul_u32_u32(u32 a, u32 b)
^~~
In file included from ../fs/ubifs/ubifs.h:26:0,
from ../fs/ubifs/shrinker.c:42:
../include/linux/math64.h: In function 'mul_u64_u32_shr':
../arch/tile/include/asm/div64.h:9:21: error: implicit declaration of
function 'mul_u32_u32' [-Werror=implicit-function-declaration]
Include the linux/types.h in tiles div64.h to slve the problem.
Fixes: 9e3d6223d209 ("math64, timers: Fix 32bit mul_u64_u32_shr() and friends")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Acked-by: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: http://lkml.kernel.org/r/1485275961-20112-1-git-send-email-sudip.mukherjee@codethink.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Merge the topic branch we're sharing with the kvm-ppc tree.
|
|
Currently the build breaks if CMA=n and SPAPR_TCE_IOMMU=y:
arch/powerpc/mm/mmu_context_iommu.c: In function ‘mm_iommu_get’:
arch/powerpc/mm/mmu_context_iommu.c:193:42: error: ‘MIGRATE_CMA’ undeclared (first use in this function)
if (get_pageblock_migratetype(page) == MIGRATE_CMA) {
^~~~~~~~~~~
Fix it by using the existing is_migrate_cma_page(), which evaulates to
false when CMA=n.
Fixes: 2e5bbb5461f1 ("KVM: PPC: Book3S HV: Migrate pinned pages out of CMA")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
If we enable RADIX but disable HUGETLBFS, the build breaks with:
arch/powerpc/mm/pgtable-radix.c:557:7: error: implicit declaration of function 'pmd_huge'
arch/powerpc/mm/pgtable-radix.c:588:7: error: implicit declaration of function 'pud_huge'
Fix it by stubbing those functions when HUGETLBFS=n.
Fixes: 4b5d62ca17a1 ("powerpc/mm: add radix__remove_section_mapping()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
With the IRQ stack changes integrated, the XRX200 devices started
emitting a constant stream of kernel messages like this:
[ 565.415310] Spurious IRQ: CAUSE=0x1100c300
This is caused by IP0 getting handled by plat_irq_dispatch() rather than
its vectored interrupt handler, which is fixed by commit de856416e714
("MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch").
Fix plat_irq_dispatch() to handle non-vectored IPI interrupts correctly
by setting up IP2-6 as proper chained IRQ handlers and calling do_IRQ
for all MIPS CPU interrupts.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15077/
[james.hogan@imgtec.com: tweaked commit message]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") the output of counter synchornisation has been
split across lines:
[ 0.665181] Synchronize counters for CPU 1:
[ 0.678578] done.
Fix this by using pr_cont, and replace printk with pr_info.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15195/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
