| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig
Qualcomm ARM Based defconfig Updates for v4.11
* Enable APQ8060 Dragonboard related devices
* Enable AHCI, PCIE, USB, thermal sensors, and ATL1C related configs
* Enable RPM/RPM-SMD clocks
* tag 'qcom-defconfig-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: defconfig: qcom: add APQ8060 DragonBoard devices
ARM: qcom_defconfig: enable thermal sensors
ARM: qcom_defconfig: add ahci configs
ARM: qcom_defconfig: add pcie and atl1c ethernet configs
ARM: qcom_defconfig: add usb related configs
ARM: qcom_defconfig: Enable RPM/RPM-SMD clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64
Qualcomm ARM64 Updates for v4.11
* Add Vol+ support for DB820C and APQ8016
* Add HDMI audio support for APQ8016
* Fix DB820C GPIO pinctrl name
* Enable WCNSS on MSM8916
* Add SCM node for MSM8996
* Use fixed XO clock on MSM8916
* tag 'qcom-arm64-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: db820c: add support to volume up key
arm64: dts: apq8016-sbc: Limit MPP4 high state to 1.8V
arm64: dts: apq8016-sbc: Add Volume Up key device node
arm64: dts: apq8016-sbc: add support to hdmi audio via adv7533
arm64: dts: db820c: fix gpio pinctrl name correctly
ARM: dts: msm8916: Add and enable wcnss node
arm64: dts: msm8996: Add SCM DT node
arm64: dts: qcom: msm8916: Use fixed factor xo clock
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64
UniPhier ARM64 SoC DT updates for v4.11
- Add an SD reset controller node for LD11 SoC
- Add an eMMC controller node for LD11/LD20 SoC
* tag 'uniphier-dt64-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: add eMMC controller node for LD11/LD20
arm64: dts: uniphier: add SD-ctrl node for LD11 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt
UniPhier ARM SoC DT updates for v4.11
- Add eMMC, SD pin-mux nodes
* tag 'uniphier-dt-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: add SD pin-mux node
ARM: dts: uniphier: add eMMC pin-mux node
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig
ARM: Keystone config support for 4.11
- Enable Reset controller and on chip MSM RAM support.
* tag 'keystone_config_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER
ARM: configs: keystone: Enable Generic on-chip SRAM driver
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt
ARM: Keystone DTS update for 4.11
Brief:
- MSM RAM node support for the Keystone 2 SOCs.
- PSC node & reset controller node support for keystone 2 SOCs.
- da830 UART node support.
* tag 'keystone_dts_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-k2e: Add PSC reset controller node
ARM: dts: keystone-k2l: Add PSC reset controller node
ARM: dts: keystone-k2hk: Add PSC reset controller node
ARM: dts: keystone: Add PSC node
ARM: keystone: dts: fix netcp clocks and add names
ARM: dts: keystone-k2g: Reserve MSM RAM for boot monitor
ARM: dts: keystone-k2e: Reserve MSM RAM for boot monitor
ARM: dts: keystone-k2l: Reserve MSM RAM for boot monitor
ARM: dts: keystone-k2hk: Reserve MSM RAM for boot monitor
ARM: dts: keystone-k2g: Add MSM RAM node
ARM: dts: keystone-k2e: Add MSM RAM node
ARM: dts: keystone-k2l: Add MSM RAM node
ARM: dts: keystone-k2hk: Add MSM RAM node
ARM: dts: keystone: Add "ti,da830-uart" compatible string
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
64bit dts changes with some adjustments to the pcie controller,
usb clocks, grf phandles for the rk3399 CRUs, epd pinctrl settings,
a phandle to the rk3399 tsadc and converting boards to use the
recently introduced pin constants.
* tag 'v4.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add rockchip,grf property for RK3399 PMUCRU/CRU
arm64: dts: rockchip: add aspm-no-l0s for rk3399
arm64: dts: rockchip: add max-link-speed for rk3399
arm64: dts: rockchip: use pin constants to describe gpios
arm64: dts: rockchip: add u2phy clock for ehci and ohci of rk3399
arm64: dts: rockchip: add rk3399 eDP HPD pinctrl
arm64: dts: rockchip: add rk3399 thermal_zones phandle
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Bit of cleanup for the cortex-a9 uarts to have that soc-specific
spare-compatible as all others have, conversion to gpio constants
and addition of rk3288 qos nodes that need to be saved before a
power-domain gets turned off.
* tag 'v4.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add soc-specific uart compatibles for rk3066/rk3188
ARM: dts: rockchip: use pin constants to describe gpios
ARM: dts: rockchip: add qos node for rk3288
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers
Some extensions to the power-domain driver to support domains in
hiword registers (write-mask in upper 16bit) and domain-definitions
for the rk3328 soc.
Secondly a "driver" that attaches to the already existing grf nodes
and is able to set static defaults for settings that cannot really
be attached to any specific subsystem.
Most GRF settings can already be set from drivers using them, but there
are some behavioural settings like the mmc/jtag switch that cannot.
As the commit message states this is really meant as a last line
of defence for things that neither belong to a subsystem nor to the
Having this here allows arm64 socs to have this as well and also
moves another bit of code out of the arm32 mach-rockchip.
* tag 'v4.11-armsoc-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: drop rk3288 jtag/mmc switch handling
soc: rockchip: add driver handling grf setup
dt-bindings: add used but undocumented rockchip grf compatible values
soc: rockchip: power-domain: add power domain support for rk3328
dt-bindings: add binding for rk3328 power domains
dt-bindings: power: add RK3328 SoCs header for idle-request
soc: rockchip: power-domain: Support domain control in hiword-registers
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Replace spaces with tabs in EHCI and OHCI ports indentation.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
|
|
The pinmux configuration in device tree was different from manual
muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c
All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the
bootloader already did the correct pinmuxing for us.
But recently u-boot is migrating to reuse device tree files from the
kernel tree, so it seems to be better to have the correct pinmuxing in
our files, too.
Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Udoo Neo has a TI WL1831 Bluetooth chip connected to the UART3 port.
Add support for it.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Udoo Neo has a TI WL1831 Wifi chip connected to the USDHC3 port.
Add support for it.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for micro USB (OTG1) and USB Host (OTG2) for UDOO Neo board.
Tested on a UDOO Neo Full board by mounting a mass storage device
on both ports.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The LDB has no reg property as it uses the IOMUX-GPR syscon to access
its registers. Remove the unit address from the DT node to make DT
compiler happy.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
On i.MX6QP the FEC interrupts are wired to the GPC, just like all other
device interrupts. This allows to FEC to wake the CPU from WFI, but for
this to work the kernel needs to know about the new IRQ routing.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix the min/max voltage constraints for the anatop 1p1 and 2p5
regulator to match the typical operating range mentioned in the
datasheet.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The regulation bound of this regulator are 2.1V to 2.875V, the
wrong DT values cause the driver to miscalculate the effective
voltage.
This isn't really an issue right now, as nobody actively changes
the regulator voltage, but better fix it now.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The i.MX7 has two iomux controllers. the iomuxc and the iomuxc_lpsr.
In a board dts we have to make sure that both controllers are supplied
with the correct pins. It's way too easy to do this wrong since only
a look into the reference manual can reveal which pins belong to which
controller. To make this clearer add "LPSR" to the pin names which
belong to the LPSR controller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
GPIO01_IO05 is controlled by the LPSR iomux controller, so attach
the corresponding pin to this controller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The watchdog pin and the pwm output pin are controlled by the
iomuxc_lpsr, not the regular iomux, so move the pins there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The watchdog pin is controlled by the iomuxc_lpsr, not the regular
iomux, so move it there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In swab.h the "#if BITS_PER_LONG > 32" breaks compiling userspace programs if
BITS_PER_LONG is #defined by userspace with the sizeof() compiler builtin.
Solve this problem by using __BITS_PER_LONG instead. Since we now
#include asm/bitsperlong.h avoid further potential userspace pollution
by moving the #define of SHIFT_PER_LONG to bitops.h which is not
exported to userspace.
This patch unbreaks compiling qemu on hppa/parisc.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix kernel panic on ACPI-based systems where CPU capacity description
is not currently handled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: skip register_cpufreq_notifier on ACPI-based systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"Hopefully last set of changes for ARC for 4.10:
- fix for unaligned access emulation corner case
- fix for udelay loop inline asm regression
- fix irq affinity finally for AXS103 board [Yuriy]
- final fixes for setting IO-coherency sanely in SMP"
* tag 'arc-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [arcompact] handle unaligned access delay slot corner case
ARCv2: smp-boot: wake_flag polling by non-Masters needs to be uncached
ARC: smp-boot: Decouple Non masters waiting API from jump to entry point
ARCv2: MCIP: update the BCR per current changes
ARC: udelay: fix inline assembler by adding LP_COUNT to clobber list
ARCv2: MCIP: Deprecate setting of affinity in Device Tree
|
|
The sizes of the MFC reserved memory regions for CMA are 16 MiB for the
left bank and 8 MiB for the right bank. But this isn't enough to decode
high resolution videos so increase the size for the left bank to 36 MiB
which is enough for 1080p (1920x1080).
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Two trivial overlapping changes conflicts in MPLS and mlx5.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add kerneldoc comments for memcpy_{to,from}io() and memset_io(). The
existing documentation for ioremap() was distant from the definition,
causing kernel-doc to miss it; move it appropriately.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170127161752.0b95e95b@lwn.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit:
129766708 ("x86/efi: Only map RAM into EFI page tables if in mixed-mode")
stopped creating 1:1 mappings for all RAM, when running in native 64-bit mode.
It turns out though that there are 64-bit EFI implementations in the wild
(this particular problem has been reported on a Lenovo Yoga 710-11IKB),
which still make use of the first physical page for their own private use,
even though they explicitly mark it EFI_CONVENTIONAL_MEMORY in the memory
map.
In case there is no mapping for this particular frame in the EFI pagetables,
as soon as firmware tries to make use of it, a triple fault occurs and the
system reboots (in case of the Yoga 710-11IKB this is very early during bootup).
Fix that by always mapping the first page of physical memory into the EFI
pagetables. We're free to hand this page to the BIOS, as trim_bios_range()
will reserve the first page and isolate it away from memory allocators anyway.
Note that just reverting 129766708 alone is not enough on v4.9-rc1+ to fix the
regression on affected hardware, as this commit:
ab72a27da ("x86/efi: Consolidate region mapping logic")
later made the first physical frame not to be mapped anyway.
Reported-by: Hanka Pavlikova <hanka@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vojtech Pavlik <vojtech@ucw.cz>
Cc: Waiman Long <waiman.long@hpe.com>
Cc: linux-efi@vger.kernel.org
Cc: stable@kernel.org # v4.8+
Fixes: 129766708 ("x86/efi: Only map RAM into EFI page tables if in mixed-mode")
Link: http://lkml.kernel.org/r/20170127222552.22336-1-matt@codeblueprint.co.uk
[ Tidied up the changelog and the comment. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Another two bug fixes:
- ptrace partial write information leak
- a guest page hinting regression introduced with v4.6"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix cmma unused transfer from pgste into pte
s390/ptrace: Preserve previous registers for short regset write
|
|
Enable the S/PDIF transmitter that is present on the Beelink X2 STB.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Add the SPDIF transceiver controller block to the H3 dtsi.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Add the SPDIF TX pin to the H3 dtsi.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
This adds the pwm_ao_b pin to allow boards which have an LED connected
to GPIOAO_9 to use the leds-pwm driver (by activating the pwm_AO_ab node
and passing the pwm_ao_b_pin pinctrl-reference).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
All Meson GX SoCs (GXBB, GXL and GXM) have a PWM controller within the
AO domain. When one of the board's LEDs is connected to one of the AO
PWM pins then this can be used to dim that LED (when the leds-pwm driver
is used).
Add the pwm_AO_ab to allow such devices to use the leds-pwm driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
After emulating an unaligned access in delay slot of a branch, we
pretend as the delay slot never happened - so return back to actual
branch target (or next PC if branch was not taken).
Curently we did this by handling STATUS32.DE, we also need to clear the
BTA.T bit, which is disregarded when returning from original misaligned
exception, but could cause weirdness if it took the interrupt return
path (in case interrupt was acive too)
One ARC700 customer ran into this when enabling unaligned access fixup
for kernel mode accesses as well
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
If an EL0 instruction in the SYS class triggers an exception, do_sysintr
looks for a sys64_hook matching the instruction, and if none is found,
injects a SIGILL. This mirrors what we do for undefined instruction
encodings in do_undefinstr, where we look for an undef_hook matching the
instruction, and if none is found, inject a SIGILL.
Over time, new SYS instruction encodings may be allocated. Prior to
allocation, exceptions resulting from these would be handled by
do_undefinstr, whereas after allocation these may be handled by
do_sysintr.
To ensure that we have consistent behaviour if and when this happens, it
would be beneficial to have do_sysinstr fall back to do_undefinstr.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
gcc-7.0 reports a potential array overflow:
arch/arm/mach-mv78xx0/pcie.c: In function 'mv78xx0_pcie_preinit':
arch/arm/mach-mv78xx0/pcie.c:81:4: error: output may be truncated before the last format character [-Werror=format-truncation=]
I haven't checked if this can actually happen, but making the
array one 32-bit word longer addresses the warning and makes
it completely safe.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
Add the missing interrupt node to properly probe
the pwm device.
This fix following error log :
[ 0.208119] sti-pwm 9510000.pwm: Failed to obtain IRQ
[ 0.222352] pwm-regulator pwm-regulator: Failed to get PWM: -517
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-aff-by: Patrice CHOTARD <patrice.chotard@st.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into HEAD
Pull "i.MX fixes for 4.10, 3rd round" from Shawn Guo:
- Fix a 'defined but not used' warning in MMDC driver when
CONFIG_PERF_EVENTS is disabled.
- Fix i.MX6DL device tree GPIO4_11 range setting.
- A bandaid fix for boot failure found on a couple of platforms due to
missing 'chosen' and 'memory' node.
* tag 'imx-fixes-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: Pass 'chosen' and 'memory' nodes
ARM: dts: imx6dl: fix GPIO4 range
ARM: imx: hide unused variable in #ifdef
|
|
The Amlogic Meson GXBB/GXL/GXM secure monitor uses part of the memory space,
this patch adds these reserved zones.
Without such reserved memory zones, running the following stress command :
$ stress-ng --vm 16 --vm-bytes 128M --timeout 10s
multiple times:
Could lead to the following kernel crashes :
[ 46.937975] Bad mode in Error handler detected on CPU1, code 0xbf000000 -- SError
...
[ 47.058536] Internal error: Attempting to execute userspace memory: 8600000f [#3] PREEMPT SMP
...
Instead of the OOM killer.
Fixes: 4f24eda8401f ("ARM64: dts: Prepare configs for Amlogic Meson GXBaby")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[khilman: added Fixes tag, added _reserved and unit addresses]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
OdroidC2 GbE link breaks under heavy tx transfer. This happens even if the
MAC does not enable Energy Efficient Ethernet (No Low Power state Idle on
the Tx path). The problem seems to come from the phy Rx path, entering the
LPI state.
Disabling EEE advertisement on the phy prevent this feature to be
negociated with the link partner and solve the issue.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot,
2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the
SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a
dual colour LED and an optical S/PDIF connector.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Enable the display pipeline with the associated 7" panel sold with the
SinA33.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The datasheet provided by Allwinner requires oscillators with an accuracy
of 50ppm. Add it to our fixed clocks so that we can properly track the
accuracy chain.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
So far, the LOSC was generated through the RTC internal oscillator, which
was a pretty poor and inaccurate choice.
Now that the RTC properly exposes its internal mux between its oscillator
and the external oscillator, we can use it were relevant.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Lichee Pi Zero is a small-sized V3s board, which is
breadboard-compatible, and with a MicroUSB port with both OTG function
and power function.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
As we have the pinctrl and clock support for the V3s SoC, it's now to
run a mainline Linux on it.
So add a .dtsi file for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
[Maxime: Removed the dependency on the CCU headers]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Since v4.10-rc1, the following logs appears in loop :
[ 801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[ 801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[ 801.966611] usb usb6-port1: cannot disable (err = -32)
[ 806.083772] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[ 806.090370] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[ 806.096494] usb usb6-port1: cannot disable (err = -32)
After analysis, xhci try to set link in U3 and returns an error.
Using snps,dis_u3_susphy_quirk fix this issue.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
|
