| Age | Commit message (Collapse) | Author |
|---|
|
At the moment this check is performed after we remove the default window
which is late and disallows to revert whatever changes enable_ddw()
has made to DMA windows.
This moves the check and error exit before removing the window.
This raised the message severity from "debug" to "warning" as this
should not happen in practice and cannot be triggered by the userspace.
Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020132315.2287178-4-aik@ozlabs.ru
|
|
The it_map array is vzalloc'ed so use vfree() for it when creating
a huge DMA window failed for whatever reason.
While at this, write zero to it_map.
Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020132315.2287178-3-aik@ozlabs.ru
|
|
I added the missing dash inside the thermal-sensor-cells.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020203723.233578-1-david@ixit.cz
|
|
I didn't notice that I already had applied this patch and while this
builds fine one copy is enough.
This reverts commit 22efef1ca05d2c96730060750d00205c49b8b39c.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
dma-controller node
'iface_clk' clock is not used by the
qcom, bam_dma driver, so remove the same from 'ipq6018' dts.
This is a preparatory patch for subsequent patch in
this series which converts the qcom_bam_dma device-tree
binding into YAML format.
Without this change, 'make dtbs_check' leads to the following
error:
$ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml:
dma-controller@7984000: clock-names: ['iface_clk', 'bam_clk']
is too long
Fix the same.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211013105541.68045-4-bhupesh.sharma@linaro.org
|
|
'qcom,config-pipe-trust-reg' property doesn't seem to be
used by the qcom, bam_dma driver, so remove the same
from 'ipq6018' dts.
This is a preparatory patch for subsequent patch in
this series which converts the qcom_bam_dma device-tree
binding into YAML format.
Without this change, 'make dtbs_check' leads to the following
error:
$ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml:
dma-controller@704000: 'qcom,config-pipe-trust-reg' does not match
any of the regexes: 'pinctrl-[0-9]+'
Fix the same.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211013105541.68045-3-bhupesh.sharma@linaro.org
|
|
Add CPU topology and define the idle states for the silver and gold
cores as well as the cluster.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/20210825221600.1498939-1-bjorn.andersson@linaro.org
|
|
For some reason apq8016-sbc, apq8096-db820c, msm8916-mtp and msm8996-mtp
were added as separate .dts and .dtsi files where the first only contains
the model name and the latter contains most of the actual definitions.
Perhaps this was done with the expectation that there would be other
devices also making use of exactly the same. However, this has not
been the case until now and it also seems unlikely in the future.
Having the extra .dtsi only clutters the file list and provides
little benefit.
Move the contents of the .dtsi into the .dts file to make this consistent
with most other devices that simply define everything in the .dts.
There are no functional changes introduced by this patch:
The compiled ".dtb"s are completely identical.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018133656.32649-1-stephan@gerhold.net
|
|
SMEM can now be described directly in the reserved-memory.
This is mainly meant for newer SoCs where there is only one SMEM
region. However, even on older SoCs like MSM8916 there is clearly one
main SMEM region (described by "memory-region") that holds the
smem_header and one special extra region used only for data of the
RPM ("qcom,rpm-msg-ram").
The definition in reserved-memory also looks cleaner for older SoCs,
so make use of that in MSM8916 as well.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018110009.30837-2-stephan@gerhold.net
|
|
According to the new DT schema for qcom,rpm-msg-ram the node name
should be sram@. memory@ is reserved for definition of physical RAM
(usable by Linux).
This fixes the following dtbs_check error on various device trees:
memory@60000: 'device_type' is a required property
From schema: dtschema/schemas/memory.yaml
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018110009.30837-1-stephan@gerhold.net
|
|
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer,
Add support for it.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211012112735.2765-3-d.antony.jr@gmail.com
|
|
Enable SDHCI (SD Card) Storage.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211012112735.2765-2-d.antony.jr@gmail.com
|
|
Add support for touchscreen in this device.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211012112735.2765-1-d.antony.jr@gmail.com
|
|
This property doesn't exist in Linux kernel.
Fixes: 288ef8a42612 ("arm64: dts: sdm845: add oneplus6/6t devices")
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011200138.115688-1-david@ixit.cz
|
|
The change corrects the described bus clock of the QCE.
Fixes: 3e482859f1ef ("dts: qcom: sdm845: Add dt entries to support crypto engine.")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011095534.1580406-1-vladimir.zapolskiy@linaro.org
|
|
The change adds description of Qualcomm crypto engine controller and
BAM associated with it. The change is inspired by commit 3e482859f1ef
("dts: qcom: sdm845: Add dt entries to support crypto engine.")
While performance of cryptographic algorithms executed on QCE is lower
than e.g. ones tinkered for ARM NEON, the offloaded execution would
make sense:
# cryptsetup benchmark | grep aes
aes-cbc 128b 71.0 MiB/s 71.9 MiB/s
aes-cbc 256b 62.4 MiB/s 62.4 MiB/s
aes-xts 256b 70.7 MiB/s 70.8 MiB/s
aes-xts 512b 62.0 MiB/s 63.3 MiB/s
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011094822.1580122-1-vladimir.zapolskiy@linaro.org
|
|
Although the early NXP NCI NFC bindings required the clock-frequency
property, it was never used by the driver and it is actually a property
of I2C bus, not I2C slave.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011073143.32645-1-krzysztof.kozlowski@canonical.com
|
|
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer.
Add support for it.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211010033750.15204-1-d.antony.jr@gmail.com
|
|
Add support for the Venus video decoder/encoder but leave it disabled
by default; it is expected to eventually get enabled in each machine
specific DT, where required.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008102119.268869-3-angelogioacchino.delregno@collabora.com
|
|
This string- and electrical configuration depend on the board and panel,
and should hence not be defined generically for every user of pm660l.
SoMainline will pick this configuration again when enabling WLED on the
Sony Nile platform.
Fixes: 7b56a804e58b ("arm64: dts: qcom: pm660l: Add WLED support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-14-marijn.suijten@somainline.org
|
|
The number of WLED strings used by a certain platform depend on the
panel connected to that board and may not be the same for every user of
pmi8994.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-13-marijn.suijten@somainline.org
|
|
The driver now sets an appropriate default for WLED4 (and WLED5) just
like WLED3 making this linear array from 0-3 redundant. In addition the
driver is now able to parse arrays of variable length solving the "all
four strings *have to* be defined" comment.
Besides the driver will now warn when both properties are specified to
prevent ambiguity: the length of the array is enough to imply a set
number of strings.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-12-marijn.suijten@somainline.org
|
|
The property is named "qcom,external-pfet", as found by
dt_binding_check:
'qcom,eternal-pfet' does not match any of the regexes
Fixes: 37aa540cbd30 ("arm64: dts: qcom: pmi8994: Add WLED node")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-11-marijn.suijten@somainline.org
|
|
Herobrine is a Chrome OS board/platform based on the QCA SC7280.
Add a .dtsi for the platform parts and a .dts for the board
specific bits. Currently the .dtsi has everything except the
compatible strings, things will likely get shuffled around in the
future as we learn more about the differences between boards.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007140854.1.I70615769f27bbaf7e480419d0f660f802b1fea43@changeid
|
|
Enable PCIe controller and PHY for sc7280 IDP board.
Add specific NVMe GPIO entries for SKU1 and SKU2 support.
Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1633628923-25047-4-git-send-email-pmaliset@codeaurora.org
|
|
Add PCIe controller and PHY nodes for sc7280 SOC.
Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1633628923-25047-3-git-send-email-pmaliset@codeaurora.org
|
|
This enables the JDI FHD_R63452 LCD panel used on Xiaomi Mi 5
Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210925113808.524749-1-raffaele.tranquillini@gmail.com
|
|
The 'interrupt-map' in several QCom SoCs is malformed. The '#address-cells'
size of the parent interrupt controller (the GIC) is not accounted for.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928192210.1842377-1-robh@kernel.org
|
|
Per QMP PHY bindings schema, 'vdda-phy-supply' and 'vdda-phy-supply' are
required for IPQ8074 QMP USB3 PHY. Since supplies are not added in DTS
for this platform, add a dummy regulator as the supply to QMP USB3 PHY,
so that dtbs_check stops complaining the missing supplies.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-10-shawn.guo@linaro.org
|
|
IPQ8074 PCIe PHY nodes are broken in the many ways:
- '#address-cells', '#size-cells' and 'ranges' are missing.
- Child phy/lane node is missing, and the child properties like
'#phy-cells' and 'clocks' are mistakenly put into parent node.
- The clocks properties for parent node are missing.
Fix them to get the nodes comply with the bindings schema.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-9-shawn.guo@linaro.org
|
|
'vdda-phy-supply' and 'vdda-pll-supply' are required properties. Add
them to fix the dtbs_check warnings below.
phy@1da7000: 'vdda-phy-supply' is a required property
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
phy@1da7000: 'vdda-pll-supply' is a required property
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-8-shawn.guo@linaro.org
|
|
The 'reg-names' is not a supported/used property. Drop it from QMP PHY
nodes to fix dtbs_check warnings like below.
phy-wrapper@88e9000: 'reg-names' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/sm8350-hdk.dt.yaml
arch/arm64/boot/dts/qcom/sm8350-mtp.dt.yaml
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-7-shawn.guo@linaro.org
|
|
The following properties are not supported and causing dtbs_check
warnings.
- vdda-phy-max-microamp
- vdda-pll-max-microamp
- vddp-ref-clk-max-microamp
- vddp-ref-clk-always-on
Drop them from QMP PHY nodes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-6-shawn.guo@linaro.org
|
|
Many child nodes of QMP PHY are named without following bindings schema
and causing dtbs_check warnings like below.
phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$'
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml
Correct them to fix the warnings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-5-shawn.guo@linaro.org
|
|
'#clock-cells' is a required property of QMP PHY child node, not itself.
Move it to fix the dtbs_check warnings.
There are only '#clock-cells' removal from SM8350 QMP PHY nodes, because
child nodes already have the property.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-4-shawn.guo@linaro.org
|
|
Add 200MHz OPP in qspi_opp_table
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632892123-11006-1-git-send-email-rajpat@codeaurora.org
|
|
The RTC on the pmk8350 is not useful on all boards. Some boards may
not provide backup power to the PMIC but might have another RTC on the
board that does have backup power. In this case it's better to not use
the RTC on the PMIC.
At the moment, the only boards that includes this PMIC are sc7280-idp
and sc7280-idp2. On sc7280-idp I'm not aware of any other RTCs, but
sc7280-idp2 has a Chrome OS EC on it and this is intended to provide
the RTC for the AP.
Let's do what we normally do for hardware that's not used by all
boards and set it to a default status of "disabled" and then enable it
on the boards that need it.
NOTE: for sc7280-idp it's _possible_ we might also want to add
`allow-set-time;`. That could be the subject of a future patch if it
is indeed true.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Satya Priya <skakit@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[bjorn: Enable the RTC on the MTP as well]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929153553.1.Ib44c2ac967833d7a3f51452d44d15b7b8d23c1f0@changeid
|
|
Add node to support the QUP5 I2C controller inside of IPQ8074.
It is exactly the same as QUP2 controllers.
Some routers like ZTE MF269 use this bus.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001145421.18302-1-amadeus@jmu.edu.cn
|
|
Rename thermal zones according to dt-schema.
Fix warnings like:
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml: thermal-zones: 'cpu-thermal0', 'cpu-thermal1', 'cpu-thermal2', 'cpu-thermal3' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020180002.195467-1-david@ixit.cz
|
|
No (active) developer owns this hardware, so let's remove Linux support.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Many MIPS CPUs have optional CPU features which are not activated for
all CPU cores. Print the CPU options, which are implemented in the core,
in /proc/cpuinfo. This makes it possible to see which features are
supported and which are not supported. This should cover all standard
MIPS extensions. Before, it only printed information about the main MIPS
ASEs.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Changes from original patch[0]:
- Remove cpu_has_6k_cache and cpu_has_8k_cache due to commit 6ce91ba8589a
("MIPS: Remove cpu_has_6k_cache and cpu_has_8k_cache in cpu_cache_init()")
- Add new options: mac2008_only, ftlbparex, gsexcex, mmid, mm_sysad,
mm_full
- Use seq_puts instead of seq_printf as suggested by checkpatch
- Minor commit message reword
[0]: https://lore.kernel.org/linux-mips/20181223225224.23042-1-hauke@hauke-m.de/
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fix checkpatch WARNING: Prefer seq_puts to seq_printf
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fix the following checkpatch errors - no logic changes:
WARNING: Block comments use a trailing */ on a separate line
+ * */
ERROR: space prohibited before open square bracket '['
+ char fmt [64];
ERROR: space prohibited before that ',' (ctx:WxE)
+ seq_printf(m, "%s0x%04x", i ? ", " : "" ,
ERROR: trailing whitespace
+^Iseq_printf(m, "isa\t\t\t:"); $
ERROR: trailing statements should be on next line
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fix assembly errors like:
{standard input}: Assembler messages:
{standard input}:287: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:680: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:1274: Error: opcode not supported on this processor: mips3 (mips3) `dins $12,$9,32,32'
{standard input}:2175: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
make[1]: *** [scripts/Makefile.build:277: mm/highmem.o] Error 1
with code produced from `__cmpxchg64' for MIPS64r2 CPU configurations
using CONFIG_32BIT and CONFIG_PHYS_ADDR_T_64BIT.
This is due to MIPS_ISA_ARCH_LEVEL downgrading the assembly architecture
to `r4000' i.e. MIPS III for MIPS64r2 configurations, while there is a
block of code containing a DINS MIPS64r2 instruction conditionalized on
MIPS_ISA_REV >= 2 within the scope of the downgrade.
The assembly architecture override code pattern has been put there for
LL/SC instructions, so that code compiles for configurations that select
a processor to build for that does not support these instructions while
still providing run-time support for processors that do, dynamically
switched by non-constant `cpu_has_llsc'. It went in with linux-mips.org
commit aac8aa7717a2 ("Enable a suitable ISA for the assembler around
ll/sc so that code builds even for processors that don't support the
instructions. Plus minor formatting fixes.") back in 2005.
Fix the problem by wrapping these instructions along with the adjacent
SYNC instructions only, following the practice established with commit
cfd54de3b0e4 ("MIPS: Avoid move psuedo-instruction whilst using
MIPS_ISA_LEVEL") and commit 378ed6f0e3c5 ("MIPS: Avoid using .set mips0
to restore ISA"). Strictly speaking the SYNC instructions do not have
to be wrapped as they are only used as a Loongson3 erratum workaround,
so they will be enabled in the assembler by default, but do this so as
to keep code consistent with other places.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: c7e2d71dda7a ("MIPS: Fix set_pte() for Netlogic XLR using cmpxchg64()")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
cvmx_helper_initialize_packet_io_local() is unused and after removing
it cvmx_pko_initialize_local() is also unused.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Documentation/kbuild/makefiles.rst suggests to use "archclean" for
cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement.
Since commit d92cc4d51643 ("kbuild: require all architectures to have
arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for
all architectures. This can take advantage of the parallel option (-j)
for "make clean".
I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep"
target no longer exists.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
|
|
The vsyscall directory is cleaned up by the ordinary way
via arch/sh/kernel/Makefile:
obj-$(CONFIG_VSYSCALL) += vsyscall/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
rename node to comply with dt-schema
Fix warning:
arch/arm/boot/dts/qcom-ipq8064-rb3011.dt.yaml: s25fl016k@0: $nodename:0: 's25fl016k@0' does not match '^flash(@.*)?$'
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020204145.235050-1-david@ixit.cz
|
|
MMC nodes has to be named mmc@ to comply with dt-bindings.
Fix warnings as:
arch/arm/boot/dts/qcom-msm8660-surf.dt.yaml: sdcc@12400000: $nodename:0: 'sdcc@12400000' does not match '^mmc(@.*)?$'
From schema: Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020201440.229196-1-david@ixit.cz
|
|
Fixes warnings regarding to memory and mdio nodes and
apply new naming following dt-schema.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020214741.261509-1-david@ixit.cz
|
