summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2011-10-25ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'Paul Bolle
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-25ARM: i.MX28: shift frac value in _CLK_SET_RATEMatt Burtch
Noticed when setting SSP0 in clk_set_rate, _CLK_SET_RATE attempts to reset the clock divider for the SSP0 parent clock, in this case IO0FRAC. Bits 24-29 of HW_CLKCTRL_FRAC0 are cleared correctly, but when the new frac value is written the value isn't shifted up to write the correct bit-field. This results in IO0FRAC being set to 0 and CPUFRAC being corrupted. This should occur when writing IO1FRAC, EMIFRAC in HW_CLKCTRL_FRAC0 and GPMIFRAC, HSADCFRAC in HW_CLKCTRL_FRAC1. Tested on custom i.MX28 board with SSP0 SPI driver. Signed-off-by: Matt Burtch <matt@grid-net.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-25plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desiredPaul Fertser
To configure pads during the initialisation a set of special constants is used, e.g. #define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP) The problem is that no pull-up/down is getting activated unless both PAD_CTL_PUE (pull-up enable) and PAD_CTL_PKE (pull/keeper module enable) set. This is clearly stated in the i.MX25 datasheet and is confirmed by the measurements on hardware. This leads to some rather hard to understand bugs such as misdetecting an absent ethernet PHY (a real bug i had), unstable data transfer etc. This might affect mx25, mx35, mx50, mx51 and mx53 SoCs. It's reasonable to expect that if the pullup value is specified, the intention was to have it actually active, so we implicitly add the needed bits. Cc: stable@kernel.org Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'for-linus' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (81 commits) ARM: 7133/1: SMP: fix per cpu timer setup before the cpu is marked online ARM: 7129/1: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY ARM: 7136/1: pl330: Fix a race condition ARM: smp: fix clipping of number of CPUs ARM: 7137/1: Fix error upon adding LL debug ARM: Add a few machine types to mach-types ARM: 7130/1: dev_archdata: add private iommu extension ARM: 7125/1: Add unwinding annotations for 64bit division functions ARM: 7120/1: remove bashism in check for multiple zreladdrs ARM: 7118/1: rename temp variable in read*_relaxed() ARM: 6217/4: mach-realview: expose PB1176 ROM using physmap and map_rom ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage ARM: 7062/1: cache: detect PIPT I-cache using CTR ARM: platform fixups: remove mdesc argument to fixup function ARM: 7017/1: Use generic BUG() handler ARM: 7102/1: mach-integrator: update defconfig ARM: 7087/2: mach-integrator: get timer frequency from clock ARM: 7086/2: mach-integrator: modernize clock event registration ARM: 7085/2: mach-integrator: clockevent supports oneshot mode ARM: 7084/1: mach-integrator: retire some timer macros ...
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Finally remove leftover markers sections m68k/mac: Fix mac_irq_pending() for PSC MACE and SCC m68k/mac: Fix compiler warning in via_read_time() zorro: Fix four checkpatch warnings
2011-10-25Merge branch 'misc' into for-linusRussell King
Conflicts: arch/arm/mach-integrator/integrator_ap.c
2011-10-25Merge branches 'stable/drivers-3.2', 'stable/drivers.bugfixes-3.2' and ↵Linus Torvalds
'stable/pci.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/drivers-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus: don't rely on xen_initial_domain to detect local xenstore xenbus: Fix loopback event channel assuming domain 0 xen/pv-on-hvm:kexec: Fix implicit declaration of function 'xen_hvm_domain' xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel xen/pv-on-hvm kexec: update xs_wire.h:xsd_sockmsg_type from xen-unstable xen/pv-on-hvm kexec+kdump: reset PV devices in kexec or crash kernel xen/pv-on-hvm kexec: rebind virqs to existing eventchannel ports xen/pv-on-hvm kexec: prevent crash in xenwatch_thread() when stale watch events arrive * 'stable/drivers.bugfixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pciback: Check if the device is found instead of blindly assuming so. xen/pciback: Do not dereference psdev during printk when it is NULL. xen: remove XEN_PLATFORM_PCI config option xen: XEN_PVHVM depends on PCI xen/pciback: double lock typo xen/pciback: use mutex rather than spinlock in vpci backend xen/pciback: Use mutexes when working with Xenbus state transitions. xen/pciback: miscellaneous adjustments xen/pciback: use mutex rather than spinlock in passthrough backend xen/pciback: use resource_size() * 'stable/pci.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: support multi-segment systems xen-swiotlb: When doing coherent alloc/dealloc check before swizzling the MFNs. xen/pci: make bus notifier handler return sane values xen-swiotlb: fix printk and panic args xen-swiotlb: Fix wrong panic. xen-swiotlb: Retry up three times to allocate Xen-SWIOTLB xen-pcifront: Update warning comment to use 'e820_host' option.
2011-10-25Merge branches 'arnd-randcfg-fixes', 'debug', 'io' (early part), 'l2x0', ↵Russell King
'p2v', 'pgt' (early part) and 'smp' into for-linus
2011-10-25Merge branch 'staging-next' into Linux 3.1Greg Kroah-Hartman
This was done to resolve a conflict in the drivers/staging/comedi/drivers/ni_labpc.c file that resolved a build bugfix in Linus's tree with a "better" bugfix that was in the staging-next tree that resolved the issue in a more complete manner. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-25Merge branches 'stable/bug.fixes-3.2' and 'stable/mmu.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/p2m/debugfs: Make type_name more obvious. xen/p2m/debugfs: Fix potential pointer exception. xen/enlighten: Fix compile warnings and set cx to known value. xen/xenbus: Remove the unnecessary check. xen/irq: If we fail during msi_capability_init return proper error code. xen/events: Don't check the info for NULL as it is already done. xen/events: BUG() when we can't allocate our event->irq array. * 'stable/mmu.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Fix selfballooning and ensure it doesn't go too far xen/gntdev: Fix sleep-inside-spinlock xen: modify kernel mappings corresponding to granted pages xen: add an "highmem" parameter to alloc_xenballooned_pages xen/p2m: Use SetPagePrivate and its friends for M2P overrides. xen/p2m: Make debug/xen/mmu/p2m visible again. Revert "xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set."
2011-10-25Merge branch 'stable/e820-3.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/e820-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: release all pages within 1-1 p2m mappings xen: allow extra memory to be in multiple regions xen: allow balloon driver to use more than one memory region xen/balloon: simplify test for the end of usable RAM xen/balloon: account for pages released during memory setup
2011-10-25x86: Fix compilation bug in kprobes' twobyte_is_boostableJosh Stone
When compiling an i386_defconfig kernel with gcc-4.6.1-9.fc15.i686, I noticed a warning about the asm operand for test_bit in kprobes' can_boost. I discovered that this caused only the first long of twobyte_is_boostable[] to be output. Jakub filed and fixed gcc PR50571 to correct the warning and this output issue. But to solve it for less current gcc, we can make kprobes' twobyte_is_boostable[] non-const, and it won't be optimized out. Before: CC arch/x86/kernel/kprobes.o In file included from include/linux/bitops.h:22:0, from include/linux/kernel.h:17, from [...]/arch/x86/include/asm/percpu.h:44, from [...]/arch/x86/include/asm/current.h:5, from [...]/arch/x86/include/asm/processor.h:15, from [...]/arch/x86/include/asm/atomic.h:6, from include/linux/atomic.h:4, from include/linux/mutex.h:18, from include/linux/notifier.h:13, from include/linux/kprobes.h:34, from arch/x86/kernel/kprobes.c:43: [...]/arch/x86/include/asm/bitops.h: In function ‘can_boost.part.1’: [...]/arch/x86/include/asm/bitops.h:319:2: warning: use of memory input without lvalue in asm operand 1 is deprecated [enabled by default] $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt 551: 0f a3 05 00 00 00 00 bt %eax,0x0 554: R_386_32 .rodata.cst4 $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o arch/x86/kernel/kprobes.o: file format elf32-i386 Contents of section .data: 0000 48000000 00000000 00000000 00000000 H............... Contents of section .rodata.cst4: 0000 4c030000 L... Only a single long of twobyte_is_boostable[] is in the object file. After, without the const on twobyte_is_boostable: $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt 551: 0f a3 05 20 00 00 00 bt %eax,0x20 554: R_386_32 .data $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o arch/x86/kernel/kprobes.o: file format elf32-i386 Contents of section .data: 0000 48000000 00000000 00000000 00000000 H............... 0010 00000000 00000000 00000000 00000000 ................ 0020 4c030000 0f000200 ffff0000 ffcff0c0 L............... 0030 0000ffff 3bbbfff8 03ff2ebb 26bb2e77 ....;.......&..w Now all 32 bytes are output into .data instead. Signed-off-by: Josh Stone <jistone@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-24MIPS: O32: Provide definition of registers ta0 .. ta3.Ralf Baechle
Later IRIX versions provide them in <sys/regdef.h> and gas also accepts $ta0 .. $ta3 since binutils 2.18 so Linux should do the same for source compatibility.
2011-10-24MIPS: perf: Add Octeon support for hardware perf.David Daney
Enable hardware counters for Octeon, and add the corresponding event mappings. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2790/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: perf: Add support for 64-bit perf counters.David Daney
The hard coded constants are moved to struct mips_pmu. All counter register access move to the read_counter and write_counter function pointers, which are set to either 32-bit or 64-bit access methods at initialization time. Many of the function pointers in struct mips_pmu were not needed as there was only a single implementation, these were removed. I couldn't figure out what made struct cpu_hw_events.msbs[] at all useful, so I removed it too. Some functions and other declarations were reordered to reduce the need for forward declarations. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2792/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: perf: Reorganize contents of perf support files.David Daney
The contents of arch/mips/kernel/perf_event.c and arch/mips/kernel/perf_event_mipsxx.c were divided in a seemingly ad hoc manner, with the first including the second. I moved all the hardware counter support code to perf_event_mipsxx.c and removed the gating #ifdefs to the Kconfig and Makefile. Now perf_event.c contains only the callchain support, everything else is in perf_event_mipsxx.c There are no code changes, only moving of functions from one file to the other, or removing empty unneeded functions. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dezhong Diao <dediao@cisco.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2791/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.cDavid Daney
Get rid of a bunch of useless inline declarations, and join a bunch of improperly split lines. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2793/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Add accessor macros for 64-bit performance counter registers.David Daney
Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2789/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Add probes for more Octeon II CPUs.David Daney
Detect cn61XX, cn66XX and cn68XX CPUs in cpu_probe_cavium(). Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2777/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Add more CPU identifiers for Octeon II CPUs.David Daney
The CPU identifiers for cn68XX, cn66XX and cn61XX are known, so add them. Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2776/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: XLR, XLS: Add comment for smp setupHillf Danton
It seems that BSP could be setup twice, but the nlm_cpu_ready array is only set for ASPs in smpboot.S, not including BSP. Signed-off-by: Hillf Danton <dhillf@gmail.com> Cc: "Jayachandran C." <jayachandranc@netlogicmicro.com> Cc: LKML <linux-kernel@vger.kernel.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2695/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>,
2011-10-24MIPS: JZ4740: GPIO: Check correct IRQ in demux handlerLars-Peter Clausen
Check the trigger direction for the triggered IRQ instead of the parent IRQ. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/2433/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: JZ4740: GPIO: Simplify IRQ demuxerLars-Peter Clausen
We already know the base IRQ for a GPIO chip, so there is no need to recalculate it in the demux handler. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Lars-Peter Clausen <lars@metafoo.de> Patchwork: http://patchwork.linux-mips.org/patch/2432/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: JZ4740: Use generic irq chipLars-Peter Clausen
Use the generic irq chip framework to implement the jz4740 INTC and GPIO irq chips. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2434/ Patchwork: https://patchwork.linux-mips.org/patch/2771/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss
Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: kill au1xxx.h headerManuel Lauss
No longer required Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h
2011-10-24MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? definesManuel Lauss
This patch gets rid of all CONFIG_SOC_AU1XXX defines in DMA/DBDMA-related code. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2704/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header depManuel Lauss
au1xxx-ide uses defines from the pb1200/db1200 headers: get DBDMA ID through platform resource information, hardcode register spacing. The only 2 users of this driver (and the only boards it can really work on realiably) use the same register layout. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-ide@vger.kernel.org To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-ide@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Patchwork: https://patchwork.linux-mips.org/patch/2716/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: Redo PCI as platform driverManuel Lauss
- Rewrite Alchemy PCI support as a platform driver. - Fixup boards which have PCI. Run-tested on DB1500 and DB1550. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/pci.c delete mode 100644 arch/mips/pci/fixup-au1000.c delete mode 100644 arch/mips/pci/ops-au1000.c create mode 100644 arch/mips/pci/pci-alchemy.c
2011-10-24MIPS: Alchemy: more base address cleanupManuel Lauss
remove all redundant peripheral base address defines, fix all affected boards and drivers. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: rewrite USB platform setup.Manuel Lauss
Use runtime CPU detection to setup all USB parts. Remove the Au1200 OTG and UDC platform devices since there are no drivers for them anyway. Clean up the USB address mess in the au1000 header. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2703/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: abstract USB block control register accessManuel Lauss
Alchemy chips have one or more registers which control access to the usb blocks as well as PHY configuration. I don't want the OHCI/EHCI glues to know about the different registers and bits; new code hides the gory details of USB configuration from them. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Patchwork: https://patchwork.linux-mips.org/patch/2709/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 drivers/usb/host/alchemy-common.c
2011-10-24MIPS: Remove __init from add_wired_entry()Manuel Lauss
For Alchemy-PCI I need to add a wired entry after resuming from RAM; remove the __init from add_wired_entry() so that this actually works. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2684/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: support multiple GPIO styles in one kernelManuel Lauss
For GPIOLIB=y decide at runtime which gpiochips to register; in the GPIOLIB=n case, the gpio headers need to be reshuffled a bit to make multiple implementations coexist peacefully. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2679/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: Always build power codeManuel Lauss
No reason NOT to build it Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24NET: au1000_eth: Pass MACDMA address through platform resource info.Manuel Lauss
This patch removes the last hardcoded base address from the au1000_eth driver. The base address of the MACDMA unit was derived from the platform device id; if someone registered the MACs in inverse order both would not work. So instead pass the base address of the DMA unit to the driver with the other platform resource information. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: David S. Miller <davem@davemloft.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2674/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-10-24ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large ↵Nicolas Pitre
TEXT_OFFSET If TEXT_OFFSET is too large (e.g. like on MSM) the resulting immediate argument gets wider than 8 bits. Noticed by David Brown <davidb@codeaurora.org> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-24Merge remote-tracking branch 'rmk/devel-stable' into HEADRob Herring
2011-10-24m68k: Finally remove leftover markers sectionsKirill Tkhai
Markers have removed already twice: 1: fc5377668c3d808e1d53c4aee152c836f55c3490 2: eb878b3bc0349344dbf70c51bf01fc734d5cf2d3 But a little bit is still here. Signed-off-by: Tkhai Kirill <tkhai@yandex.ru> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-24m68k/mac: Fix mac_irq_pending() for PSC MACE and SCCFinn Thain
Add missing return statement. The docs say that the level 4 PSC IRQs relate to MACE DMA and SCC. Since those drivers don't call mac_irq_pending() this patch has no affect. But it should be fixed all the same, since it can be useful for MACE debugging. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-24m68k/mac: Fix compiler warning in via_read_time()Finn Thain
The algorithm described in the comment compares two reads from the RTC but the code actually reads once and compares the result to an uninitialized value. This causes the compiler to warn, "last_result maybe used uninitialized". Make the code match the comment, fix the warning and perhaps improve reliability. Tested on a Quadra 700. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-24x86, mrst: add platform support for MSIC MFD driverMika Westerberg
The MSIC MFD driver creates platform devices for MSIC device drivers so we don't need to create them in platform code anymore. This patch adds a new runtime check which determines whether we are running on a Medfield platform and enables the MSIC MFD driver accordingly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Move to the new db500 PRCMU APIMattias Nilsson
Now that we have a shared API between the DB8500 and DB5500 PRCMU's, switch to using this neutral API instead. We delete the parts of db8500-prcmu.h that is now PRCMU-neutral, and calls will be diverted to respective driver. Common registers are in dbx500-prcmu-regs.h and common accessors and defines in <linux/mfd/dbx500-prcmu.h> This way we get a a lot more abstraction and code reuse. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24ARM: imx/mx31moboard: use mc13xxx structs instead of removed mc13783 structsUwe Kleine-König
This is needed with patch mfd: Remove mc13783 API functions and symbols (currently cde41c030 in next) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Delete ab3550 driverLinus Walleij
The AB3550 never passed the prototype stage. Instead it was used as a precursor to AB5500 for testing basic building blocks used in that chip, since they had large similarities. Since AB3550 will not see the light of day in product form and since the prototypes are no longer used, let's delete the driver and any references to it. Cc: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mach-ux500: ab5500 platform code addedMattias Wallin
This patch adds the platform part needed to get the ab5500-core driver started. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24x86, mrst: Some drivers need to known when an SCU is availableAlan Cox
Add a notifier so that drivers can hook into SCU availability in order to take actions post initialisation when/if the SCU becomes available. In the ideal world we wouldn't need this and we could avoid any init dependancies of this form, but in practice we can't do it for some cases. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24ARM: imx/mx31moboard: Add mc13783 power button supportPhilippe Rétornaz
Add the power-on button on mx31moboard using MC13783 PMIC. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24ARM: imx+mc13xxx: remove obsolete leds and regulators flagsPhilippe Rétornaz
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-17 00:49:56 +0000