| Age | Commit message (Collapse) | Author |
|---|
|
A preliminary version of a hack to invoke unmap_all_vpes() from an ioctl
didn't work very well. We eventually determined this was because we were
invoking it on the wrong file descriptor, but not getting an error.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/bbbddd56135399baf699bc46ffb6e7f08d9f8c9f.camel@infradead.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Pull kvm fix from Paolo Bonzini:
- Fix cleanup mistake (probably a cut-and-paste error) in a Xen
hypercall
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/xen: Fix cleanup logic in emulation of Xen schedop poll hypercalls
|
|
kvm_xen_schedop_poll does a kmalloc_array() when a VM polls the host
for more than one event channel potr (nr_ports > 1).
After the kmalloc_array(), the error paths need to go through the
"out" label, but the call to kvm_read_guest_virt() does not.
Fixes: 92c58965e965 ("KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly")
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Manuel Andreas <manuel.andreas@tum.de>
[Adjusted commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Misc Devicetrees for v6.17
StarFive:
Sort properties on the MilkV Mars and add the power status LED to all
jh7110 boards.
AMD:
Add 64-bit Microblaze V cpu compatible.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
dt-bindings: riscv: cpus: Add AMD MicroBlaze V 64bit compatible
riscv: dts: starfive: jh7110-common: add status power led node
riscv: dts: starfive: jh7110-milkv-mars sort properties
Link: https://lore.kernel.org/r/20250723-postage-skylight-597377b5f8e4@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/newsoc
ARM Devicetrees for v6.17
Sophgo:
Add support for Duo Module 01 Evaluation Board.
This board uses SG2000(old codename CV181xH),
which is dual-arch, RISC-V and ARM64. This
patch add the support for ARM64.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'arm-sophgo-dt-for-v6.17' of https://github.com/sophgo/linux:
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
arm64: Add SOPHGO SOC family Kconfig support
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add initial SG2000 SoC device tree
Link: https://lore.kernel.org/r/MAUPR01MB11072C4B088AAC02268044E95FE5FA@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V Devicetrees for v6.17
Sophgo:
For CV18xx serials:
There are three major changes. The first is to add the
RTCSYS MFD node, which provides rich control registers
for soc power management and other rich control functions;
the second is to add the reset controller node and add
related reset properties for other peripherals; the third
is to add ethernet controller related nodes to the soc
and enable ethernet device control for HuashanPi.
For SG2042:
There are three major changes. The first is to add ISA
extensions such as xtheadvector/ziccrse/zfh for cpu cores;
the second is add ethernet controller support; the third
is add two new boards EVB_V1 & EVB_V2 which use SG2042
SoC.
For SG2044:
There are many changes. The first is to add pmu
configuration; the second is to add ISA extensions
ziccrse and add missing riscv,cbop-block-size property
for cpu cores; the third is to add more peripherals
nodes for SoC after clock controller is ready, such as
MSI/PCIe/pwm/SPI-NOR etc. This PR also add HWMON MCU
device for the sophgo-srd3-10 board and reserve uart0
node for sophgo-srd3-10 board because uart0 is already
occupied by the firmware.
This PR also moves sophgo.yaml from the riscv directory
to soc/sophgo for sharing between riscv and arm. CV18xx
SoC contains a RISC-V big core and an ARM64 big core.
Moving sophgo.yaml to a shared location will help us
add support for ARM cores to the CV18xx chip in the future.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.17' of https://github.com/sophgo/linux: (32 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
Link: https://lore.kernel.org/r/MAUPR01MB1107297124C9DA0CD77DA3DC1FE5FA@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The ipi tracepoints are mostly generic, but the tracepoints ipi_raise,
ipi_entry and ipi_exit are only used by arm and arm64. This means these
trace events are wasting memory in all the other architectures that do not
use them.
Add CONFIG_HAVE_EXTRA_IPI_TRACEPOINTS and have arm and arm64 select it to
enable these trace events. The config makes it easy if other architectures
decide to trace these as well.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Will Deacon <will@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250722103714.64eba013@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit 8211dad627981 ("s390: add pte_free_defer() for pgtables sharing
page") added a warning to pte_free_defer(), on our request. It was meant
to warn if this would ever be reached for KVM guest mappings, because
the page table would be freed w/o a gmap_unlink(). THP mappings are not
allowed for KVM guests on s390, so this should never happen.
However, it is possible that the warning is triggered in a valid case as
false-positive.
s390_enable_sie() takes the mmap_lock, marks all VMAs as VM_NOHUGEPAGE and
splits possibly existing THP guest mappings. mm->context.has_pgste is set
to 1 before that, to prevent races with the mm_has_pgste() check in
MADV_HUGEPAGE.
khugepaged drops the mmap_lock for file mappings and might run in parallel,
before a vma is marked VM_NOHUGEPAGE, but after mm->context.has_pgste was
set to 1. If it finds file mappings to collapse, it will eventually call
pte_free_defer(). This will trigger the warning, but it is a valid case
because gmap is not yet set up, and the THP mappings will be split again.
Therefore, remove the warning and the comment.
Fixes: 8211dad627981 ("s390: add pte_free_defer() for pgtables sharing page")
Cc: <stable@vger.kernel.org> # 6.6+
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Currently, only the STA extension needed a reset function but that's
going to be the case for FWFT as well. Add a reset callback that can
be implemented by SBI extensions.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-13-cleger@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The FWFT SBI extension will need to dynamically allocate memory and do
init time specific initialization. Add an init/deinit callbacks that
allows to do so.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-12-cleger@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Mark Rutland noticed that the task parameter is ignored and
'current' is being used instead. Since this is usually
what its passed, it hasn't yet been causing problems but likely
will as the code gets more testing.
But, once this is fixed, it creates a new bug in copy_thread_gcs()
since the gcs_el_mode isn't yet set for the task before its being
checked. Move gcs_alloc_thread_stack() after the new task's
gcs_el0_mode initialization to avoid this.
Fixes: fc84bc5378a8 ("arm64/gcs: Context switch GCS state for EL0")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250719043740.4548-2-jeremy.linton@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
MT7620A devices all contain a wifi device as part of the SOC. Add it
here to get it working.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://patch.msgid.link/20250722212856.11343-7-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/arm
Fix for seldom hangs when bringing up arm32 cpu cores.
* tag 'v6.17-rockchip-arm32-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: fix kernel hang during smp initialization
Link: https://lore.kernel.org/r/12434765.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable ARCH_SOPHGO, pinctrl (built-in, required to boot), ADC as module.
This defconfig is able to boot from SD card on Milk-V Duo Module 01
evalboard.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250612132844.767216-7-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
First user will be Aarch64 core within SG2000 SoC.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250612132844.767216-6-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Duo Module 01 Evaluation Board contains Sophgo Duo Module 01
SMD SoM, Ethernet+USB switch, microSD slot, etc...
Add only support for UART0 (console) and microSD slot.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20250612132844.767216-5-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The Duo Module 01 is a compact module with integrated SG2000,
WI-FI6/BTDM5.4, and eMMC.
Add only support for UART and SDHCI.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20250612132844.767216-4-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add initial device tree for the SG2000 SoC by SOPHGO (from ARM64 PoV).
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250612132844.767216-3-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
As the mdio multipledxer is marked as mdio device, the check complains
the mdio bus number exceed the maximum.
Change the node name to mdio-mux to remove the following warnings:
mdio@3009800 (mdio-mux-mmioreg): mdio@80:reg:0:0: 128 is greater than
the maximum of 31
Fixes: b7945143bc33 ("riscv: dts: sophgo: Add mdio multiplexer device for cv18xx")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507140738.XRjv3G8i-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202507121830.POx2KDVi-lkp@intel.com/
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250715221349.11034-1-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
As the uart0 is already occupied by the firmware, reserve it
to avoid this port is used by mistake.
Tested-by: Han Gao <rabenda.cn@gmail.com>
Reviewed-by: Chen Wang <wangchen20@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250703004024.85221-1-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Sophgo SG2042_EVB_V2.0 [1] is a prototype development board based on SG2042
Currently supports serial port, sdcard/emmc, pwm, fan speed control.
Link: https://github.com/sophgo/sophgo-hardware/tree/master/SG2042/SG2042-x4-EVB [1]
Signed-off-by: Han Gao <rabenda.cn@gmail.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/c1b6ccdc69af0c1457fc1486a6bc8a1e83671537.1751700954.git.rabenda.cn@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Sophgo SG2042_EVB_V1.X [1] is a prototype development board based on SG2042
Currently supports serial port, sdcard/emmc, pwm, fan speed control.
Link: https://github.com/sophgo/sophgo-hardware/tree/master/SG2042/SG2042-x8-EVB [1]
Signed-off-by: Han Gao <rabenda.cn@gmail.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/27091134ce1f8a6541a349afc324d6f7402ea606.1751700954.git.rabenda.cn@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add ethernet GMAC device node for the sg2042.
Tested-by: Han Gao <rabenda.cn@gmail.com>
Link: https://lore.kernel.org/r/20250708064627.509363-1-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Enable ethernet controller and mdio multiplexer device on Huashan Pi.
Link: https://lore.kernel.org/r/20250703021600.125550-4-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add DT device node of mdio multiplexer device for cv18xx SoC.
Link: https://lore.kernel.org/r/20250703021600.125550-3-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add ethernet controller device node for cv18xx SoC.
Link: https://lore.kernel.org/r/20250703021600.125550-2-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add PMU configuration for the cpu of sg2044, which is the V2
version of C920.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Tested-by: Han Gao <rabenda.cn@gmail.com>
Link: https://lore.kernel.org/r/20250703003844.84617-1-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
sg2044 support ziccrse extension.
Signed-off-by: Han Gao <rabenda.cn@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/0889174f2e013e095b94940614f4a0a6e614b09c.1751858054.git.rabenda.cn@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
sg2042 support Zfh ISA extension [1].
Link: https://occ-oss-prod.oss-cn-hangzhou.aliyuncs.com/resource//1737721869472/%E7%8E%84%E9%93%81C910%E4%B8%8EC920R1S6%E7%94%A8%E6%88%B7%E6%89%8B%E5%86%8C%28xrvm%29_20250124.pdf [1]
Signed-off-by: Han Gao <rabenda.cn@gmail.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/bcaf5684c614959f49a9770bf3cd41096cee5fe6.1751698574.git.rabenda.cn@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
sg2042 support Ziccrse ISA extension [1].
Link: https://lore.kernel.org/all/20241103145153.105097-12-alexghiti@rivosinc.com/ [1]
Signed-off-by: Han Gao <rabenda.cn@gmail.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/859df9a05e1693fec9bd2c7dcf14415bb15230bd.1751698574.git.rabenda.cn@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The sg2042 SoCs support xtheadvector [1] so it can be included in the
devicetree. Also include vlenb for the cpu. And set vlenb=16 [2].
This can be tested by passing the "mitigations=off" kernel parameter.
Link: https://lore.kernel.org/linux-riscv/20241113-xtheadvector-v11-4-236c22791ef9@rivosinc.com/ [1]
Link: https://lore.kernel.org/linux-riscv/aCO44SAoS2kIP61r@ghost/ [2]
Signed-off-by: Han Gao <rabenda.cn@gmail.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/915bef0530dee6c8bc0ae473837a4bd6786fa4fb.1751698574.git.rabenda.cn@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add PCIe device node for SG2044 and configuration for Sophgo SRD3-10.
Link: https://lore.kernel.org/r/20250618015851.272188-3-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add MSI device tree node for SG2044.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/20250618015851.272188-2-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add known reset configuration for existed device.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250617070144.1149926-5-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add reset generator node for all CV18XX series SoC.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Junhui Liu <junhui.liu@pigmoral.tech>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250617070144.1149926-4-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The kernel complains no "riscv,cbop-block-size" and disables the Zicbop
extension. Add the missing property to keep it functional.
Fixes: ae5bac370ed4 ("riscv: dts: sophgo: Add initial device tree of Sophgo SRD3-10")
Link: https://lore.kernel.org/r/20250613074513.1683624-1-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add pwm device node for SG2044.
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/20250608232836.784737-12-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add SPI NOR device node for SG2044.
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Link: https://lore.kernel.org/r/20250608232836.784737-11-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add pinctrl DT node and configuration for SG2044.
Link: https://lore.kernel.org/r/20250608232836.784737-10-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add ethernet control node for sg2044.
Link: https://lore.kernel.org/r/20250608232836.784737-9-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add MCU devicetree node for Sophgo SRD3-10 board. This is used to
provide SUSP function for the board.
Link: https://lore.kernel.org/r/20250608232836.784737-8-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add emmc controller and sd controller DT node for SG2044.
Link: https://lore.kernel.org/r/20250608232836.784737-7-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The DMA controller of SG2044 is a standard Synopsys IP, which is
already supported by the kernel.
Add DMA controller DT node for SG2044.
Link: https://lore.kernel.org/r/20250608232836.784737-6-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The I2C controller of SG2044 is a standard Synopsys IP, with one
the ref clock is need.
Add I2C DT node for SG2044 SoC.
Link: https://lore.kernel.org/r/20250608232836.784737-5-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The GPIO controller is a standard Synopsys IP, which is already
supported by the kernel.
Add GPIO DT node for SG2044 SoC.
Link: https://lore.kernel.org/r/20250608232836.784737-4-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add clock controller and pll clock node for sg2044.
Link: https://lore.kernel.org/r/20250608232836.784737-3-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The TOP system controller device is necessary for the SG2044 clock
controller. Add it to the SoC device tree.
Link: https://lore.kernel.org/r/20250608232836.784737-2-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add the RTCSYS MFD node: in Cvitek CV18xx and its successors RTC Subsystem
is quite advanced and provides SoC power management functions as well.
The SoC family also contains DW8051 block (Intel 8051 compatible CPU core)
and an associated SRAM. The corresponding control registers are mapped into
RTCSYS address space as well.
Link: https://github.com/sophgo/sophgo-doc/tree/main/SG200X/TRM
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20250513203128.620731-1-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Ftrace is tightly coupled with architecture specific code because it
requires the use of trampolines written in assembly. This means that when
a new feature or optimization is made, it must be done for all
architectures. To simplify the approach, CONFIG_HAVE_FTRACE_* configs are
added to denote which architecture has the new enhancement so that other
architectures can still function until they too have been updated.
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant
with the HAVE_DYNAMIC_FTRACE.
Remove the HAVE_FTRACE_MCOUNT config and use DYNAMIC_FTRACE directly where
applicable.
Link: https://lore.kernel.org/all/20250703154916.48e3ada7@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250704104838.27a18690@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add new ARCH_WARN_ASM macro for BUG/WARN assembly code sharing with
Rust to avoid the duplication.
No functional changes.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://lore.kernel.org/r/20250502094537.231725-4-fujita.tomonori@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
