| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"This contains a regression fix for a problem that was introduced in
v4.7-rc6.
In 4.7-rc1 we introduced auto-probing for the ACPI DSM (device-
specific-method) format that the platform firmware implements for
nvdimm devices. We initially fixed a regression in probing the QEMU
DSM implementation by making acpi_check_dsm() tolerant of the way QEMU
reports the "0 DSMs supported" condition.
However, that broke HPE platforms since that tolerance caused the
driver to mistakenly match the 1-zero-byte response those platforms
give to "unknown" commands. Instead, we simply make the driver
tolerant of not finding any supported DSMs. This has been tested to
work with both QEMU and HPE platforms.
This commit has appeared in a -next release with no reported issues"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: make DIMM DSMs optional
|
|
While testing the new on-demand ARS patches we discovered that
differences between the nfit_test and normal nfit driver shutdown paths
can leak resources. Unify the shutdown paths to trigger via a devm_
callback when the acpi_desc->dev is unbound from its driver.
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Let the provider module be explicitly passed in rather than implicitly
assumed by the module that calls nvdimm_bus_register(). This is in
preparation for unifying the nfit and nfit_test driver teardown paths.
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that ACPI processor idle driver supports LPI(Low Power Idle), lets
enable ACPI_PROCESSOR_IDLE for ARM64 too.
This patch just removes the IA64 and X86 dependency on ACPI_PROCESSOR_IDLE
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI 6.0 introduced an optional object _LPI that provides an alternate
method to describe Low Power Idle states. It defines the local power
states for each node in a hierarchical processor topology. The OSPM can
use _LPI object to select a local power state for each level of processor
hierarchy in the system. They used to produce a composite power state
request that is presented to the platform by the OSPM.
Since multiple processors affect the idle state for any non-leaf hierarchy
node, coordination of idle state requests between the processors is
required. ACPI supports two different coordination schemes: Platform
coordinated and OS initiated.
This patch adds initial support for Platform coordination scheme of LPI.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI 6.0 adds a new method to specify the CPU idle states(C-states)
called Low Power Idle(LPI) states. Since new architectures like ARM64
use only LPIs, introduce ACPI_PROCESSOR_CSTATE to encapsulate all the
code supporting the old style C-states(_CST).
This patch will help to extend the processor_idle module to support
LPI.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pass the nfit buffer as a parameter rather than hanging it off of
acpi_desc.
Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
acpi_evaluate_object() allocates memory. Free the buffer allocated
during acpi_nfit_add(). In order for this memory to be freed
acpi_nfit_init() needs to be converted to duplicate the nfit contents in
its internal allocation. Use zero-length arrays to minimize the thrash
with the rest of the nfit driver implementation.
All of the add_<nfit-sub-table>() routines now validate a minimum table
size and expect hotplugged tables to match the size of the original
table to count as a duplicate. For variable length tables, like 'idt'
and 'flush', we calculate the dynamic size. Note that hotplug by
definition cannot change the interleave as it would cause data
corruption of in-use namespaces.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: Xiao Guangrong <guangrong.xiao@intel.com>
Reported-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This patch adds logic to treat virtual ramdisk SPA as pmem region, then
ramdisk's /dev/pmem* device can be mounted with iso9660.
It's useful to work with the httpboot in EFI firmware to pull a remote
ISO file to the local memory region for booting and installation.
Wiki page of UEFI HTTPBoot with OVMF:
https://en.opensuse.org/UEFI_HTTPBoot_with_OVMF
The ramdisk function in EDK2/OVMF generates a ACPI0012 root device that
it contains empty _STA but without _DSM:
DefinitionBlock ("ssdt2.aml", "SSDT", 2, "INTEL ", "RamDisk ", 0x00001000)
{
Scope (\_SB)
{
Device (NVDR)
{
Name (_HID, "ACPI0012") // _HID: Hardware ID
Name (_STR, Unicode ("NVDIMM Root Device")) // _STR: Description String
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
}
In section 5.2.25.2 of ACPI 6.1 spec, it mentions that the "SPA Range
Structure Index" of virtual SPA shall be set to zero. That means virtual SPA
will not be associated by any NVDIMM region mapping.
The VCD's SPA Range Structure in NFIT is similar to virtual disk region
as following:
[028h 0040 2] Subtable Type : 0000 [System Physical Address Range]
[02Ah 0042 2] Length : 0038
[02Ch 0044 2] Range Index : 0000
[02Eh 0046 2] Flags (decoded below) : 0000
Add/Online Operation Only : 0
Proximity Domain Valid : 0
[030h 0048 4] Reserved : 00000000
[034h 0052 4] Proximity Domain : 00000000
[038h 0056 16] Address Range GUID : 77AB535A-45FC-624B-5560-F7B281D1F96E
[048h 0072 8] Address Range Base : 00000000B6ABD018
[050h 0080 8] Address Range Length : 0000000005500000
[058h 0088 8] Memory Map Attribute : 0000000000000000
The way to not associate a SPA range is to never reference it from a "flush hint",
"interleave", or "control region" table.
After testing on OVMF, pmem driver can support the region that it doesn't
assoicate to any NVDIMM mapping. So, treat VCD like pmem is a idea to get
a pmem block device that it contains iso.
v4:
Instoduce nfit_spa_is_virtual() to check virtual ramdisk SPA and create
pmem region.
v3:
To simplify patch, removed useless VCD region in libnvdimm.
v2:
Removed the code for setting VCD to a read-only region.
Cc: Gary Lin <GLin@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Linda Knippers <linda.knippers@hpe.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Since DPTF has its own folder under ACPI, move this file also there.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This driver adds support for Dynamic Platform and Thermal Framework
(DPTF) Platform Power Participant device (INT3407) support.
This participant is responsible for exposing platform telemetry such as:
max_platform_power
platform_power_source
adapter_rating
battery_steady_power
charger_type
These attributes are presented via sysfs interface under the INT3407
platform device:
$ls /sys/bus/platform/devices/INT3407\:00/dptf_power/
adapter_rating_mw
battery_steady_power_mw
charger_type
max_platform_power_mw
platform_power_source
`
ACPI methods description used in this driver:
PMAX: Maximum platform power that can be supported by the battery in
mW.
PSRC: System charge source,
0x00 = DC
0x01 = AC
0x02 = USB
0x03 = Wireless Charger
ARTG: Adapter rating in mW (Maximum Adapter power) Must be 0 if no
AC adapter is plugged in.
CTYP: Charger Type,
Traditional : 0x01
Hybrid: 0x02
NVDC: 0x03
PBSS: Returns max sustained power for battery in milliWatts.
The INT3407 also contains _BTS and _BIX objects, which are compliant to
ACPI 5.0, specification. Those objects are already used by ACPI battery
(PNP0C0A) driver and information about them is exported via Linux power
supply class registration.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 4995734e973a "acpi, nfit: fix acpi_check_dsm() vs zero functions
implemented" attempted to fix a QEMU regression by supporting its usage
of a zero-mask as a valid response to a DSM-family probe request.
However, this behavior breaks HP platforms that return a zero-mask by
default causing the probe to misidentify the DSM-family.
Instead, the QEMU regression can be fixed by simply not requiring the DSM
family to be identified.
This effectively reverts commit 4995734e973a, and removes the DSM
requirement from the init path.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Linda Knippers <linda.knippers@hpe.com>
Fixes: 4995734e973a ("acpi, nfit: fix acpi_check_dsm() vs zero functions implemented")
Reported-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Tested-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The Makefile for building this is "acpi-y" and so it is not built
as a module. Hence including module.h and everything that comes
with it just for the no-op MODULE_LICENSE is rather heavy handed.
The license info is found at the top of the file, so we just remove
the MODULE_LICENSE and the include of module.h
We add an include of export.h since the file exports some symbols.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Kconfig for this file is:
drivers/acpi/Kconfig:config ACPI_DOCK
drivers/acpi/Kconfig: bool "Dock"
...and so it is not built as a module. Hence including module.h
and everything that comes with it just for the no-op MODULE_LICENSE
and friends is rather heavy handed.
The license/author info is found at the top of the file, so we
just remove the MODULE_LICENSE etc and the include of module.h
The file does still have some module_param() so we add the right
include for that infrastructure.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Kconfig for this file is:
drivers/acpi/Kconfig:config ACPI_PCI_SLOT
drivers/acpi/Kconfig: bool "PCI slot detection driver"
...and so it is not built as a module. Hence including module.h
and everything that comes with it just for the no-op MODULE_LICENSE
and friends is rather heavy handed.
The license/author info is found at the top of the file, so we
just remove the MODULE_LICENSE etc and the include of module.h
We delete the DRIVER_VERSION macro as well since it is unused.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Kconfig currently controlling compilation of these files are:
drivers/acpi/Kconfig:menuconfig PMIC_OPREGION
drivers/acpi/Kconfig: bool "PMIC (Power Management Integrated Circuit) operation region support"
drivers/acpi/Kconfig:config BXT_WC_PMIC_OPREGION
drivers/acpi/Kconfig: bool "ACPI operation region support for BXT WhiskeyCove PMIC"
drivers/acpi/Kconfig:config XPOWER_PMIC_OPREGION
drivers/acpi/Kconfig: bool "ACPI operation region support for XPower AXP288 PMIC"
...meaning they currently are not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the code there is no doubt it is builtin-only.
We delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
One file was using module_init. Since module_init translates to
device_initcall in the non-modular case, the init ordering remains
unchanged with this commit.
In one case we replace the module.h with export.h since that file
is exporting some symbols, but does not use __init. The other two
are using __init and so module.h gets replaced with init.h there.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As part of the hotplug cleanup, the CPU_STARTING/DYING actions are going
away soon. This driver needlessly uses those two macro, and so this patch
replaces that code with something more sensible.
Commit:
8da8373447d6a57a5a9f55233d35beb15d92d0d2 ("ACPI / processor: Fix STARTING/DYING action in acpi_cpu_soft_notify()")
added checks for those two actions, because the notification callback can
sleep, causing a hung CPU. This patch instead checks for the ONLINE/DEAD
actions, which are the ones that are handled by the driver in the first
place.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153335.964962885@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The __pmem address space was meant to annotate codepaths that touch
persistent memory and need to coordinate a call to wmb_pmem(). Now that
wmb_pmem() is gone, there is little need to keep this annotation.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
* acpica-fixes:
Revert "ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis"
Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading"
Revert "ACPICA: Namespace: Fix namespace/interpreter lock ordering"
* acpi-ec-fixes:
ACPI / EC: Fix code ordering issue in ec_remove_handlers()
|
|
nvdimm_flush() is a replacement for the x86 'pcommit' instruction. It is
an optional write flushing mechanism that an nvdimm bus can provide for
the pmem driver to consume. In the case of the NFIT nvdimm-bus-provider
nvdimm_flush() is implemented as a series of flush-hint-address [1]
writes to each dimm in the interleave set (region) that backs the
namespace.
The nvdimm_has_flush() routine relies on platform firmware to describe
the flushing capabilities of a platform. It uses the heuristic of
whether an nvdimm bus provider provides flush address data to return a
ternary result:
1: flush addresses defined
0: dimm topology described without flush addresses (assume ADR)
-errno: no topology information, unable to determine flush mechanism
The pmem driver is expected to take the following actions on this ternary
result:
1: nvdimm_flush() in response to REQ_FUA / REQ_FLUSH and shutdown
0: do not set, WC or FUA on the queue, take no further action
-errno: warn and then operate as if nvdimm_has_flush() returned '0'
The caveat of this heuristic is that it can not distinguish the "dimm
does not have flush address" case from the "platform firmware is broken
and failed to describe a flush address". Given we are already
explicitly trusting the NFIT there's not much more we can do beyond
blacklisting broken firmwares if they are ever encountered.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for triggering flushes of a DIMM's writes-posted-queue
(WPQ) via the pmem driver move mapping of flush hint addresses to the
region driver. Since this uses devm_nvdimm_memremap() the flush
addresses will remain mapped while any region to which the dimm belongs
is active.
We need to communicate more information to the nvdimm core to facilitate
this mapping, namely each dimm object now carries an array of flush hint
address resources.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now that all shared mappings are handled by devm_nvdimm_memremap() we no
longer need nfit_spa_map() nor do we need to trigger a callback to the
bus provider at region disable time.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
table loading"
Revert commit 2f38b1b16d92 (ACPICA: Namespace: Fix deadlock triggered by
MLC support in dynamic table loading) that attempted to fix a deadlock
issue introduced by a previous commit, but it led to a lock ordering
inconsistency that caused further problems to appear.
Fixes: 2f38b1b16d92 (ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Revert commit 45209046c47b (ACPICA: Namespace: Fix namespace/interpreter
lock ordering) that renders Dell Precision 5510 with the latest (1.2.10)
BIOS applied unable to boot.
Fixes: 45209046c47b (ACPICA: Namespace: Fix namespace/interpreter lock ordering)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=121701
Reported-by: Greg White <gwhite@kupulau.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If we compile ACPI configfs.c as module it will confuse the linker as it
hides symbols from the actual configfs:
Kernel: arch/x86/boot/bzImage is ready (#1236)
MODPOST 5739 modules
ERROR: "configfs_unregister_subsystem" [samples/configfs/configfs_sample.ko] undefined!
ERROR: "configfs_register_subsystem" [samples/configfs/configfs_sample.ko] undefined!
ERROR: "config_group_init" [samples/configfs/configfs_sample.ko] undefined!
ERROR: "config_item_init_type_name" [samples/configfs/configfs_sample.ko] undefined!
ERROR: "config_group_init_type_name" [samples/configfs/configfs_sample.ko] undefined!
ERROR: "configfs_undepend_item" [fs/ocfs2/cluster/ocfs2_nodemanager.ko] undefined!
...
Prevent these by renaming the file to acpi_configfs.c instead.
Reported-by: Scott Lawson <scott.lawson@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
New tables can be loaded by creating directories under /config/table/
and writing the AML code into the aml table attribute. Various table
attributes will be readable once the table is successfully loaded.
Unloading tables is not supported at the moment, but it can be easily
implemented once ACPI loading functions provide a table handle to be
used for unloading.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Register the ACPI subsystem with configfs.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add support for ACPI reconfiguration notifiers to allow subsystems
to react to changes in the ACPI tables that happen after the initial
enumeration. This is similar with the way dynamic device tree
notifications work.
The reconfigure notifications supported for now are device add and
device remove.
Since ACPICA allows only one table notification handler, this patch
makes the table notifier function generic and moves it out of the
sysfs specific code.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the ACPI tables change as a result of a dinamically loaded table
and a bus rescan is required the enumeration/visited flag are not
consistent.
I2C/SPI are not directly enumerated in acpi_bus_attach(), however
the visited flag is set. This makes it impossible to check if an
ACPI device has already been enumerated by the I2C and SPI
subsystems. To fix this issue we only set the visited flags if
the device is not I2C or SPI.
With this change we also need to remove setting visited to false
from acpi_bus_attach(), otherwise if we rescan already enumerated
I2C/SPI devices we try to re-enumerate them.
Note that I2C/SPI devices can be enumerated either via a scan handler
(when using PRP0001) or via regular device_attach(). In either case
the flow goes through acpi_default_enumeration() which makes it the
ideal place to mark the ACPI device as enumerated.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is an order issue in ec_remove_handlers() that acpi_ec_stop()
is called before removing the operation region handler. That is
incorrect, because the operation region handler removal triggers
_REG(DISCONNECT) which may result in new EC transactions to carry
out.
That existing issue has been triggered by the following commit:
Commit: dcf15cbded656a12335bc4151f3f75f10080a375
Subject: ACPI / EC: Fix a boot EC regresion by restoring boot EC
which changed the driver to call ec_remove_handlers() after invoking
_REG(CONNECT), so the issue has become visible.
Fixes: dcf15cbded65 (ACPI / EC: Fix a boot EC regresion by restoring boot EC)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=102421
Reported-and-tested-by: Wolfram Sang <wsa@the-dreams.de>
Reported-by: Nicholas <nkudriavtsev@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In preparation for generically mapping flush hint addresses for both the
BLK and PMEM use case, provide a generic / reference counted mapping
api. Given the fact that a dimm may belong to multiple regions (PMEM
and BLK), the flush hint addresses need to be held valid as long as any
region associated with the dimm is active. This is similar to the
existing BLK-region case where multiple BLK-regions may share an
aperture mapping. Up-level this shared / reference-counted mapping
capability from the nfit driver to a core nvdimm capability.
This eliminates the need for the nd_blk_region.disable() callback. Note
that the removal of nfit_spa_map() and related infrastructure is
deferred to a later patch.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
We were needlessly converting nfit_mem_init() errors to -ENOMEM.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Before enabling use of flush hints for pmem regions, we need to make
sure they are always associated. Move the initialization of nfit_flush
out of the block-window specific init path to the general init path.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
* acpica-fixes:
ACPICA: Namespace: Fix namespace/interpreter lock ordering
* acpi-pci-fixes:
ACPI,PCI,IRQ: separate ISA penalty calculation
Revert "ACPI, PCI, IRQ: remove redundant code in acpi_irq_penalty_init()"
ACPI,PCI,IRQ: factor in PCI possible
* acpi-debug-fixes:
ACPI / debugger: Fix regression introduced by IS_ERR_VALUE() removal
|
|
If devm_add_action() fails, we are explicitly calling the cleanup to free
the resources allocated. Lets use the helper devm_add_action_or_reset()
and return directly in case of error, since the cleanup function
has been already called by the helper if there was any error.
Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This patch adds support for platform initited graceful shutdown as
described in sections 5.6.6(Table-143) and 6.3.5.1 of ACPI 6.1 spec
The OSPM will get a graceful shutdown request via a Notify operator
on \_SB device with a value of 0x81 per section 5.6.6. Following the
shutdown request from platform the OSPM needs to follow the
processing sequence as described in section 6.2.5.1.
v3
* Switched to regular work with delays from delayed work
* Dropped changes to actypes.h
* Small style changes
v2
* Switched from standalone driver to a simple notify handler
v1
* Initial
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI 6.0 introduces a new table STAO to list the devices which are used
by Xen and can't be used by Dom0. On Xen virtual platforms, the physical
UART is used by Xen. So here it hides UART from Dom0.
CC: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI)
CC: Len Brown <lenb@kernel.org> (supporter:ACPI)
CC: linux-acpi@vger.kernel.org (open list:ACPI)
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In acpi_subsystem_init(), function acpi_enable_subsystem() is
called to do the real job. However with different flags passed to
acpi_enable_subsystem(), different code is executed.
In acpi_subsystem_init(), with "~ACPI_NO_ACPI_ENABLE" passed in, it
will only switch over the platform to the ACPI mode. The remaining
part of acpi_enable_subsystem() is done when acpi_bus_init() is
called.
So the comments above acpi_subsystem_init() is not exact, change it
here.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The FIFO unlocking mechanism in acpi_dbg has been broken by the
following commit:
Commit: 287980e49ffc0f6d911601e7e352a812ed27768e
Subject: remove lots of IS_ERR_VALUE abuses
It converted !IS_ERR_VALUE(ret) into !ret which was not entirely
correct. Fix the regression by taking ret > 0 into account too as
appropriate.
Fixes: 287980e49ffc (remove lots of IS_ERR_VALUE abuses)
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Simplifications, changelog & subject massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is a lock order issue in acpi_load_tables(). The namespace lock
is held before holding the interpreter lock.
With ACPI_MUTEX_DEBUG enabled in the kernel, this is printed to the
log during boot:
[ 0.885699] ACPI Error: Invalid acquire order: Thread 405884224 owns [ACPI_MTX_Namespace], wants [ACPI_MTX_Interpreter] (20160422/utmutex-263)
[ 0.885881] ACPI Error: Could not acquire AML Interpreter mutex (20160422/exutils-95)
[ 0.893846] ACPI Error: Mutex [0x0] is not acquired, cannot release (20160422/utmutex-326)
[ 0.894019] ACPI Error: Could not release AML Interpreter mutex (20160422/exutils-133)
The issue has been introduced by the following commit:
Commit: 2f38b1b16d9280689e5cfa47a4c50956bf437f0d
ACPICA Commit: bfe03ffcde8ed56a7eae38ea0b188aeb12f9c52e
Subject: ACPICA: Namespace: Fix a regression that MLC support triggers
dead lock in dynamic table loading
Which fixed a deadlock issue for acpi_ns_load_table() in
acpi_ex_add_table() but didn't take care of the lock order in
acpi_ns_load_table() correctly.
Originally (before the above commit), ACPICA used the
namespace/interpreter locks in the following 2 key code
paths:
1. Table loading:
acpi_ns_load_table
L(Namespace)
acpi_ns_parse_table
acpi_ns_one_complete_parse
U(Namespace)
2. Object evaluation:
acpi_ns_evaluate
L(Interpreter)
acpi_ps_execute_method
U(Interpreter)
acpi_ns_load_table
L(Namespace)
U(Namespace)
acpi_ev_initialize_region
L(Namespace)
U(Namespace)
address_space.setup
L(Namespace)
U(Namespace)
address_space.handler
L(Namespace)
U(Namespace)
acpi_os_wait_semaphore
acpi_os_acquire_mutex
acpi_os_sleep
L(Interpreter)
U(Interpreter)
During runtime, while acpi_ns_evaluate is called, the lock order is
always Interpreter -> Namespace.
In turn, the problematic commit acquires the locks in the following
order:
3. Table loading:
acpi_ns_load_table
L(Namespace)
acpi_ns_parse_table
L(Interpreter)
acpi_ns_one_complete_parse
U(Interpreter)
U(Namespace)
To fix the lock order issue, move the interpreter lock to
acpi_ns_load_table() to ensure the lock order correctness:
4. Table loading:
acpi_ns_load_table
L(Interpreter)
L(Namespace)
acpi_ns_parse_table
acpi_ns_one_complete_parse
U(Namespace)
U(Interpreter)
However, this doesn't fix the current design issues related to the
namespace lock. For example, we can notice that in acpi_ns_evaluate(),
outside of acpi_ns_load_table(), the namespace objects may be created
by the named object creation control methods. And the creation of
the method-owned namespace objects are not locked by the namespace
lock. This patch doesn't try to fix such kind of existing issues.
Fixes: 2f38b1b16d92 (ACPICA: Namespace: Fix a regression that MLC support triggers dead lock in dynamic table loading)
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Our Windows probe result shows that EC._REG is evaluated after evaluating
all _INI/_STA control methods.
With boot EC always switched in acpi_ec_dsdt_probe(), we can see that as
long as there is no EC opregion accesses in the MLC (module level code, AML
code out of any control methods) and in _INI/_STA, there is no need to make
sure that ECDT must be correct.
Bugs of 9399/12461 were reported against an order issue that BAT0/1._STA
evaluations contain EC accesses while the ECDT setting is wrong.
>From the acpidump output posted on bug 9399, we can see that it is actually
a different issue. In this table, if EC._REG is not executed, EC accesses
will be done in a platform specific manner. As we've already ensured not to
execute EC._REG during the eary stage, we can remove the quirks for bug
9399.
From the acpidump output posted on bug 12461, we can see that it still
needs the quirk. In this table, EC._REG flags a named object whose default
value is One, thus BAT1._STA surely should invoke EC accesses whatever we
invoke EC._REG or not. We have to keep the quirk for it before we can root
cause the issue.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Failure handling of the boot EC code is not tidy. This patch cleans
them up with acpi_ec_alloc().
This patch also changes acpi_ec_dsdt_probe(), always switches the
boot EC from the ECDT one to the DSDT one in this function.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since commit 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements)
the penalty values are calculated on the fly rather than at boot time.
This works fine for PCI interrupts but not so well for ISA interrupts.
The information on whether or not an ISA interrupt is in use is not
available to the pci_link.c code directly. That information is
obtained from the outside via acpi_penalize_isa_irq(). [If its
"active" argument is true, then the IRQ is in use by ISA.]
Since the current code relies on PCI Link objects for determination
of penalties, we are factoring in the PCI penalty twice after
acpi_penalize_isa_irq() function is called.
To avoid that, limit the newly added functionality to just PCI
interrupts so that old behavior is still maintained.
Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements)
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Tested-by: Wim Osterholt <wim@djo.tudelft.nl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Trying to make the ISA and PCI init functionality common turned out
to be a bad idea, because the ISA path depends on external
functionality.
Restore the previous behavior and limit the refactoring to PCI
interrupts only.
Fixes: 1fcb6a813c4f "ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()"
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Tested-by: Wim Osterholt <wim@djo.tudelft.nl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The change introduced in commit 103544d86976 (ACPI,PCI,IRQ: reduce
resource requirements) omitted the initially applied PCI_POSSIBLE
penalty when the IRQ is active.
Incorrect calculation of the penalty leads the ACPI code to assigning
a wrong interrupt number to a PCI INTx interrupt.
This would not be as bad as it sounds in theory. It would just cause
the interrupts to be shared and result in performance penalty.
However, some drivers (like the parallel port driver) don't like
interrupt sharing and in the above case they will causes all of
the PCI drivers wanting to share the interrupt to be unable to
request it.
The issue has not been caught in testing because the behavior is
platform-specific and depends on the peripherals ending up sharing
the IRQ and their drivers.
Before the above commit the code would add the PCI_POSSIBLE value
divided by the number of possible IRQ users to the IRQ penalty
during initialization.
Later in that code path, if the IRQ is chosen as the active IRQ or
if it is used by ISA; additional penalties are added.
Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements)
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Tested-by: Wim Osterholt <wim@djo.tudelft.nl>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an expression in the ACPI PCI IRQ management code added by a
recent commit that overlooked missing parens in it, so the result of
the computation is incorrect in some cases (Sinan Kaya)"
* tag 'acpi-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI,PCI,IRQ: correct operator precedence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"1/ Two regression fixes since v4.6: one for the byte order of a sysfs
attribute (bz121161) and another for QEMU 2.6's NVDIMM _DSM (ACPI
Device Specific Method) implementation that gets tripped up by new
auto-probing behavior in the NFIT driver.
2/ A fix tagged for -stable that stops the kernel from
clobbering/ignoring changes to the configuration of a 'pfn'
instance ("struct page" driver). For example changing the
alignment from 2M to 1G may silently revert to 2M if that value is
currently stored on media.
3/ A fix from Eric for an xfstests failure in dax. It is not
currently tagged for -stable since it requires an 8-exabyte file
system to trigger, and there appear to be no user visible side
effects"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: fix format interface code byte order
dax: fix offset overflow in dax_io
acpi, nfit: fix acpi_check_dsm() vs zero functions implemented
libnvdimm, pfn, dax: fix initialization vs autodetect for mode + alignment
|
|
The omitted parenthesis prevents the addition operation when
acpi_penalize_isa_irq function is called.
Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements)
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The _PTS control method is defined in the section 7.4.1 of acpi 6.0
spec. The _PTS control method is executed by the OS during the sleep
transition process for S1, S2, S3, S4, and for orderly S5 shutdown.
The _PTS control method provides the BIOS a mechanism for performing
some housekeeping, such as writing the sleep type value to the embedded
controller, before entering the system sleeping state. Note that some
Lenovo Server BIOS use this mechanism to detect reboot event and
prompt user by popped dialog box.
According to section 7.5 of acpi 6.0 spec, _PTS should run after _TTS.
Add a _PTS evaulation to the existing _TTS reboot notifier and change
the notifier name to reflect the fact that it's not for _TTS only any
more.
Signed-off-by: Ocean He <hehy1@lenovo.com>
Signed-off-by: Nagananda Chumbalkar <nchumbalkar@lenovo.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI/APEI is designed to verifiy/report H/W errors, like Corrected
Error(CE) and Uncorrected Error(UC). It contains four tables: HEST,
ERST, EINJ and BERT. The first three tables have been merged for
a long time, but because of lacking BIOS support for BERT, the
support for BERT is pending until now. Recently on ARM 64 platform
it is has been supported. So here we come.
Under normal circumstances, when a hardware error occurs, kernel will
be notified via NMI, MCE or some other method, then kernel will
process the error condition, report it, and recover it if possible.
But sometime, the situation is so bad, so that firmware may choose to
reset directly without notifying Linux kernel.
Linux kernel can use the Boot Error Record Table (BERT) to get the
un-notified hardware errors that occurred in a previous boot. In this
patch, the error information is reported via printk.
For more information about BERT, please refer to ACPI Specification
version 6.0, section 18.3.1:
http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
The following log is a BERT record after system reboot because of hitting
a fatal memory error:
BERT: Error records from previous boot:
[Hardware Error]: It has been corrected by h/w and requires no further action
[Hardware Error]: event severity: corrected
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: memory error
[Hardware Error]: error_status: 0x0000000000000400
[Hardware Error]: physical_address: 0xffffffffffffffff
[Hardware Error]: card: 1 module: 2 bank: 3 row: 1 column: 2 bit_position: 5
[Hardware Error]: error_type: 2, single-bit ECC
[Tomasz Nowicki: Clear error status at the end of error handling]
[Tony: Applied some cleanups suggested by Fu Wei]
[Fu Wei: delete EXPORT_SYMBOL_GPL(bert_disable), improve the code]
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Tested-by: Jonathan (Zhixiong) Zhang <zjzhang@codeaurora.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
