| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of these are cpufreq changes, which has been a recurring
pattern for a few recent cycles.
Those changes include new hardware support (AN7583 SoC support in the
airoha cpufreq driver, ipq5424 support in the qcom-nvmem cpufreq
driver, MT8196 support in the mediatek cpufreq driver, AM62D2 support
in the ti cpufreq driver), DT bindings and Rust code updates, cleanups
of the core and governors, and multiple driver fixes and cleanups.
Beyond that, there are hibernation fixes (some remaining 6.16 cycle
fallout and an issue related to hybrid suspend in the amdgpu driver),
cleanups of the PM core code, runtime PM documentation update, cpuidle
and power capping cleanups, and tooling updates.
Specifics:
- Rearrange variable declarations involving __free() in the cpufreq
core and intel_pstate driver to follow common coding style (Rafael
Wysocki)
- Fix object lifecycle issue in update_qos_request(), rearrange freq
QoS updates using __free(), and adjust frequency percentage
computations in the intel_pstate driver (Rafael Wysocki)
- Update intel_pstate to allow it to enable HWP without EPP if the
new DEC (Dynamic Efficiency Control) HW feature is enabled (Rafael
Wysocki)
- Use on_each_cpu_mask() in drv_write() in the ACPI cpufreq driver to
simplify the code (Rafael Wysocki)
- Use likely() optimization in intel_pstate_sample() (Yaxiong Tian)
- Remove dead EPB-related code from intel_pstate (Srinivas
Pandruvada)
- Use scope-based cleanup for cpufreq policy references in multiple
cpufreq drivers (Zihuan Zhang)
- Avoid calling get_governor() for the first policy in the cpufreq
core to simplify the initial policy path (Zihuan Zhang)
- Clean up the cpufreq core in multiple places (Zihuan Zhang)
- Use int type to store negative error codes in the cpufreq core and
update the speedstep-lib to use int for error codes (Qianfeng Rong)
- Update the efficient idle check for Intel extended Families in the
ondemand cpufreq governor (Sohil Mehta)
- Replace sscanf() with kstrtouint() in the conservative cpufreq
governor (Kaushlendra Kumar)
- Rename CpumaskVar::as[_mut]_ref to from_raw[_mut] in the cpumask
Rust code and mark CpumaskVar as transparent (Alice Ryhl, Baptiste
Lepers)
- Update ARef and AlwaysRefCounted imports from sync::aref in the OPP
Rust code (Shankari Anand)
- Add support for AN7583 SoC to the airoha cpufreq driver (Christian
Marangi)
- Enable cpufreq for ipq5424 in the qcom-nvmem cpufreq driver (Md
Sadre Alam)
- Add support for MT8196 to the mediatek-hw cpufreq driver, refactor
that driver and add mediatek,mt8196-cpufreq-hw DT binding (Nicolas
Frattaroli)
- Avoid redundant conditions in the mediatek cpufreq driver (Liao
Yuanhong)
- Add support for AM62D2 to the ti cpufreq driver and blocklist
ti,am62d2 SoC in dt-platdev (Paresh Bhagat)
- Support more speed grades on AM62Px SoC in the ti cpufreq driver,
allow all silicon revisions to support OPPs in it, and fix
supported hardware for 1GHz OPP (Judith Mendez)
- Add QCS615 compatible to DT bindings for cpufreq-qcom-hw (Taniya
Das)
- Minor assorted updates of the scmi, longhaul, CPPC, and armada-37xx
cpufreq drivers (Akhilesh Patil, BowenYu, Dennis Beier, and Florian
Fainelli)
- Remove outdated cpufreq-dt.txt (Frank Li)
- Fix python gnuplot package names in the amd_pstate_tracer utility
(Kuan-Wei Chiu)
- Saravana Kannan will maintain the virtual-cpufreq driver (Saravana
Kannan)
- Prevent CPU capacity updates after registering a perf domain from
failing on a first CPU that is not present (Christian Loehle)
- Add support for the cases in which frequency alone is not
sufficient to uniquely identify an OPP (Krishna Chaitanya Chundru)
- Use to_result() for OPP error handling in Rust (Onur Özkan)
- Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi
devfreq driver (Nicolas Frattaroli)
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
in rockchip-dfi devfreq-event driver (Nicolas Frattaroli)
- Fix missing error pointer dereference check of regulator instance
in the mtk-cci devfreq driver probe and remove a redundant
condition from an if () statement in that driver (Dan Carpenter,
Liao Yuanhong)
- Fail cpuidle device registration if there is one already to avoid
sysfs-related issues (Rafael Wysocki)
- Use sysfs_emit()/sysfs_emit_at() instead of sprintf()/scnprintf()
in cpuidle (Vivek Yadav)
- Fix device and OF node leaks at probe in the qcom-spm cpuidle
driver and drop unnecessary initialisations from it (Johan Hovold)
- Remove unnecessary address-of operators from the intel_idle cpuidle
driver (Kaushlendra Kumar)
- Rearrange main loop in menu_select() to make the code in that
funtion easier to follow (Rafael Wysocki)
- Convert values in microseconds to ktime using us_to_ktime() where
applicable in the intel_idle power capping driver (Xichao Zhao)
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API
(Brian Norris)
- Clear power.must_resume in noirq suspend error path to avoid
resuming a dependant device under a suspended parent or supplier
(Rafael Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode
and combine exit paths in power_down() to avoid code duplication
(Rafael Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that
do bookkeeping prior to suspend_prepare() are called (Samuel Wu)
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)"
* tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
PM: hibernate: Combine return paths in power_down()
PM: hibernate: Restrict GFP mask in power_down()
PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage
PM: runtime: Documentation: ABI: Document time units for *_time
tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces
tools/power x86_energy_perf_policy: Add make snapshot target
tools/power x86_energy_perf_policy: Prefer driver HWP limits
tools/power x86_energy_perf_policy: EPB access is only via sysfs
tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring
tools/power x86_energy_perf_policy: Enhance HWP enable
tools/power x86_energy_perf_policy: Enhance HWP enabled check
tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage
tools/power turbostat: Fix incorrect sorting of PMT telemetry
drm/amd: Fix hybrid sleep
PM: hibernate: Add pm_hibernation_mode_is_suspend()
PM: hibernate: Fix hybrid-sleep
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/power/x86/amd_pstate_tracer: Fix python gnuplot package names
cpufreq: Replace pointer subtraction with iteration macro
cpuidle: Fail cpuidle device registration if there is one already
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have GPIO awareness in the pin control core and an interesting
AAEON driver.
Core changes:
- Allow pins to be identified/marked as GPIO mode with a special
callback.
The pin controller core is now "aware" if a pin is in GPIO mode if
the callback is implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a line as GPIO
and another function such as I2C.
This is enabled in the Qualcomm TLMM driver and also implemeted
from day 1 in the new Broadcom STB driver
- Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
to better describe what the config is doing, as well as making it
more intuitive what shall be returned when reading this property
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver
- Qualcomm Glymur family pin controller driver
- Broadcom STB family pin controller driver
- Tegra186 pin controller driver
- AAEON UP pin controller support.
This is some special pin controller that works as an external
advanced line MUX and amplifier for signals from an Intel SoC. A
cooperative effort with the GPIO maintainer was needed to reach a
solution where we reuse code from the GPIO aggregator/forwarder
driver
- Renesas RZ/T2H and RZ/N2H pin controller support
- Axis ARTPEC-8 subdriver for the Samsung pin controller driver
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver
- Properly support bias pull up/down in the pinctrl-single driver
- Move over all GPIO portions using generic MMIO GPIO to the new
generic GPIO chip management which has a nice and separate API
- Proper DT bindings for some older Broadcom SoCs
- External GPIO (EGPIO) support in the Qualcomm SM8250
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers"
* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: use more common syntax for compound literals
pinctrl: Simplify printks with pOF format
pinctrl: qcom: Add SDM660 LPASS LPI TLMM
dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
pinctrl: qcom: Add glymur pinctrl driver
dt-bindings: pinctrl: qcom: Add Glymur pinctrl
pinctrl: qcom: sm8250: Add egpio support
pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
pinctrl: keembay: fix double free in keembay_build_functions()
pinctrl: spacemit: fix typo in PRI_TDI pin name
pinctrl: eswin: Fix regulator error check and Kconfig dependency
pinctrl: bcm: Add STB family pin controller driver
dt-bindings: pinctrl: Add support for Broadcom STB pin controller
pinctrl: qcom: make the pinmuxing strict
pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
pinctrl: allow to mark pin functions as requestable GPIOs
pinctrl: qcom: use generic pin function helpers
pinctrl: make struct pinfunction a pointer in struct function_desc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This just contains a few small fixes, there's been no substantial
development on regmap this release cycle"
* tag 'regmap-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: use int type to store negative error codes
regmap: Remove superfluous check for !config in __regmap_init()
regmap: mmio: Add missing MODULE_DESCRIPTION()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom
callbacks through a File-type-based and directory-scope-based
API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific
read_poll_timeout() helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs
based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific
pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and
resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor
and class ID numbers
- Implement Display to print actual vendor and class names; Debug
to print the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration
functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes"
* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
rust: pci: display symbolic PCI vendor names
rust: pci: display symbolic PCI class names
rust: pci: fix incorrect platform reference in PCI driver probe doc comment
rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
perf: make pmu_bus const
samples: rust: Add scoped debugfs sample driver
rust: debugfs: Add support for scoped directories
samples: rust: Add debugfs sample driver
rust: debugfs: Add support for callback-based files
rust: debugfs: Add support for writable files
rust: debugfs: Add support for read-only files
rust: debugfs: Add initial support for directories
driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
driver core: auxiliary bus: Drop dev_pm_domain_detach() call
driver core: Fix order of the kernel-doc parameters
driver core: get_dev_from_fwnode(): document potential race
drivers: base: fix "publically"->"publicly"
driver core/PM: Set power.no_callbacks along with power.no_pm
driver core: faux: Set power.no_pm for faux devices
rust: pci: inline several tiny functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs async directory updates from Christian Brauner:
"This contains further preparatory changes for the asynchronous directory
locking scheme:
- Add lookup_one_positive_killable() which allows overlayfs to
perform lookup that won't block on a fatal signal
- Unify the mount idmap handling in struct renamedata as a rename can
only happen within a single mount
- Introduce kern_path_parent() for audit which sets the path to the
parent and returns a dentry for the target without holding any
locks on return
- Rename kern_path_locked() as it is only used to prepare for the
removal of an object from the filesystem:
kern_path_locked() => start_removing_path()
kern_path_create() => start_creating_path()
user_path_create() => start_creating_user_path()
user_path_locked_at() => start_removing_user_path_at()
done_path_create() => end_creating_path()
NA => end_removing_path()"
* tag 'vfs-6.18-rc1.async' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
debugfs: rename start_creating() to debugfs_start_creating()
VFS: rename kern_path_locked() and related functions.
VFS/audit: introduce kern_path_parent() for audit
VFS: unify old_mnt_idmap and new_mnt_idmap in renamedata
VFS: discard err2 in filename_create()
VFS/ovl: add lookup_one_positive_killable()
|
|
Merge changes related to system sleep and runtime PM framework for
6.18-rc1:
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API (Brian
Norris)
- Clear power.must_resume in noirq suspend error path to avoid resuming
a dependant device under a suspended parent or supplier (Rafael
Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode and
combine exit paths in power_down() to avoid code duplication (Rafael
Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that do
bookkeeping prior to suspend_prepare() are called (Samuel Wu)
* pm-core:
PM: core: Add two macros for walking device links
PM: core: Annotate loops walking device links as _srcu
* pm-runtime:
PM: runtime: Documentation: ABI: Document time units for *_time
* pm-sleep:
PM: hibernate: Combine return paths in power_down()
PM: hibernate: Restrict GFP mask in power_down()
PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage
drm/amd: Fix hybrid sleep
PM: hibernate: Add pm_hibernation_mode_is_suspend()
PM: hibernate: Fix hybrid-sleep
PM: sleep: core: Clear power.must_resume in noirq suspend error path
PM: sleep: Make pm_wakeup_clear() call more clear
PM: hibernate: Fix typo in memory bitmaps description comment
PM: hibernate: Use vmalloc_array() and vcalloc() to improve code
|
|
When device_register() fails in register_node(), it calls
put_device(&node->dev). This triggers node_device_release(), which calls
kfree(to_node(dev)), thereby freeing the entire node structure.
As a result, when register_node() returns an error, the node memory has
already been freed. Calling kfree(node) again in register_one_node()
leads to a double free.
This patch removes the redundant kfree(node) from register_one_node() to
prevent the double free.
Link: https://lkml.kernel.org/r/20250918054144.58980-1-donettom@linux.ibm.com
Fixes: 786eb990cfb7 ("drivers/base/node: handle error properly in register_one_node()")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Chris Mason <clm@meta.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kern_path_locked() is now only used to prepare for removing an object
from the filesystem (and that is the only credible reason for wanting a
positive locked dentry). Thus it corresponds to kern_path_create() and
so should have a corresponding name.
Unfortunately the name "kern_path_create" is somewhat misleading as it
doesn't actually create anything. The recently added
simple_start_creating() provides a better pattern I believe. The
"start" can be matched with "end" to bracket the creating or removing.
So this patch changes names:
kern_path_locked -> start_removing_path
kern_path_create -> start_creating_path
user_path_create -> start_creating_user_path
user_path_locked_at -> start_removing_user_path_at
done_path_create -> end_creating_path
and also introduces end_removing_path() which is identical to
end_creating_path().
__start_removing_path (which was __kern_path_locked) is enhanced to
call mnt_want_write() for consistency with the start_creating_path().
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We need the driver core fixes in here to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If register_node() returns an error, it is not handled correctly.
The function will proceed further and try to register CPUs under the
node, which is not correct.
So, in this patch, if register_node() returns an error, we return
immediately from the function.
Link: https://lkml.kernel.org/r/20250822084845.19219-1-donettom@linux.ibm.com
Fixes: 76b67ed9dce6 ("[PATCH] node hotplug: register cpu: remove node struct")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vmescape mitigation fixes from Dave Hansen:
"Mitigate vmscape issue with indirect branch predictor flushes.
vmscape is a vulnerability that essentially takes Spectre-v2 and
attacks host userspace from a guest. It particularly affects
hypervisors like QEMU.
Even if a hypervisor may not have any sensitive data like disk
encryption keys, guest-userspace may be able to attack the
guest-kernel using the hypervisor as a confused deputy.
There are many ways to mitigate vmscape using the existing Spectre-v2
defenses like IBRS variants or the IBPB flushes. This series focuses
solely on IBPB because it works universally across vendors and all
vulnerable processors. Further work doing vendor and model-specific
optimizations can build on top of this if needed / wanted.
Do the normal issue mitigation dance:
- Add the CPU bug boilerplate
- Add a list of vulnerable CPUs
- Use IBPB to flush the branch predictors after running guests"
* tag 'vmscape-for-linus-20250904' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmscape: Add old Intel CPUs to affected list
x86/vmscape: Warn when STIBP is disabled with SMT
x86/bugs: Move cpu_bugs_smt_update() down
x86/vmscape: Enable the mitigation
x86/vmscape: Add conditional IBPB mitigation
x86/vmscape: Enumerate VMSCAPE bug
Documentation/hw-vuln: Add VMSCAPE documentation
|
|
Provide a function similar to devm_strdup_const() but for copying blocks
of memory that are likely to be placed in .rodata.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
auxiliary_match_id() repeatedly calculates variable @match_size in the
for loop, however, the variable is fixed actually, so it is enough to
only calculate the variable once.
Besides, the function should return directly if name of the @auxdev
does not include '.', but it still iterates over the ID table.
Additionally, statement 'dev_name(&auxdev->dev)' is fixed, but may be
evaluated more than 3 times.
Optimize logic of the function by:
- Move the logic calculating the variable out of the for loop
- Return NULL directly if @p == NULL
- Give the statement an dedicated local variable @auxdev_name
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250903-fix_auxbus-v2-1-3eae8374fd65@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Starting with commit f99508074e78 ("PM: domains: Detach on
device_unbind_cleanup()"), there is no longer a need to call
dev_pm_domain_detach() in the bus remove function. The
device_unbind_cleanup() function now handles this to avoid
invoking devres cleanup handlers while the PM domain is
powered off, which could otherwise lead to failures as
described in the above-mentioned commit.
Drop the explicit dev_pm_domain_detach() call and rely instead
on the flags passed to dev_pm_domain_attach() to power off the
domain.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250827100541.926350-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the order of the kernel-doc parameters in device_find_child() and
device_for_each_child*() functions to match the actual functions signature.
No functional changes.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Link: https://lore.kernel.org/r/20250831194930.2063390-1-gil.fine@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 9a4681a485ee ("driver core: Export get_dev_from_fwnode()") made
get_dev_from_fwnode() publicly available, but didn't document the
guarantees a caller must uphold:
get_dev_from_fwnode() obtains a reference count from the device pointer
stored in a struct fwnode_handle. While having its own reference count,
struct fwnode_handle does not keep a reference count of the device it
has a pointer to.
Consequently, a caller must guarantee that it is impossible that the
last device reference is dropped and the device is released concurrently
while calling get_dev_from_fwnode(), otherwise this is a potential UAF
and hence a bug.
Thus, document this potential race condition for get_dev_from_fwnode().
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250829205911.33142-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Trivial fix to spelling mistake in comment text.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/r/20250827114021.476668-1-zhao.xichao@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add separate macros for walking links to suppliers and consumers of a
device to help device links users to avoid exposing the internals of
struct dev_links_info in their code and possible coding mistakes related
to that.
Accordingly, use the new macros to replace open-coded device links list
walks in the core power management code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/1944671.tdWV9SEqCh@rafael.j.wysocki
|
|
Since SRCU is used for the protection of device link lists, the loops
over device link lists in multiple places in drivers/base/power/main.c
and in pm_runtime_get_suppliers() should be annotated as _srcu rather
than as _rcu which is the case currently.
Change the annotations accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2393512.ElGaqSPkdT@rafael.j.wysocki
|
|
Since faux devices are not supposed to be involved in any kind of
power management, set the no_pm flag for all of them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/6206518.lOV4Wx5bFT@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If system suspend is aborted in the "noirq" phase (for instance, due to
an error returned by one of the device callbacks), power.is_noirq_suspended
will not be set for some devices and device_resume_noirq() will return
early for them. Consequently, noirq resume callbacks will not run for
them at all because the noirq suspend callbacks have not run for them
yet.
If any of them has power.must_resume set and late suspend has been
skipped for it (due to power.smart_suspend), early resume should be
skipped for it either, or its state may become inconsistent (for
instance, if the early resume assumes that it will always follow
noirq resume).
Make that happen by clearing power.must_resume in device_resume_noirq()
for devices with power.is_noirq_suspended clear that have been left in
suspend by device_suspend_late(), which will subsequently cause
device_resume_early() to leave the device in suspend and avoid
changing its state.
Fixes: 0d4b54c6fee8 ("PM / core: Add LEAVE_SUSPENDED driver flag")
Link: https://lore.kernel.org/linux-pm/5d692b81-6f58-4e86-9cb0-ede69a09d799@rowland.harvard.edu/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3381776.aeNJFYEL58@rafael.j.wysocki
|
|
Change the 'ret' variable from unsigned int to int to store negative error
codes or zero returned by regmap_field_read() and regmap_read(), and change
'-1' to 'negative errno' in the comments.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250828150702.193288-1-rongqianfeng@vivo.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
These iterations require the read lock, otherwise RCU
lockdep will splat:
=============================
WARNING: suspicious RCU usage
6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G O
-----------------------------
drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/547:
#0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a
#1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b
#2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b
#3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b
#4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98
stack backtrace:
CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY
Tainted: [O]=OOT_MODULE
Stack:
223721b3a80 6089eac6 00000001 00000001
ffffff00 6089eac6 00000535 6086e528
721b3ac0 6003c294 00000000 60031fc0
Call Trace:
[<600407ed>] show_stack+0x10e/0x127
[<6003c294>] dump_stack_lvl+0x77/0xc6
[<6003c2fd>] dump_stack+0x1a/0x20
[<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e
[<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e
[<603d980f>] device_suspend+0x528/0x541
[<603da24b>] dpm_suspend+0x1a2/0x267
[<603da837>] dpm_suspend_start+0x5d/0x72
[<600ca0c9>] suspend_devices_and_enter+0xab/0x736
[...]
Add the fourth argument to the iteration to annotate
this and avoid the splat.
Fixes: 06799631d522 ("PM: sleep: Make async suspend handle suppliers like parents")
Fixes: ed18738fff02 ("PM: sleep: Make async resume handle consumers like children")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The software_node_register_node_group() and
software_node_unregister_node_group() functions take in essence an
array of pointers to software_node structs. Since the functions do not
modify the array declare the argument as constant, so that static
arrays can be declared as const and annotated as __initconst.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/2zny5grbgtwbplynxffxg6dkgjgqf45aigwmgxio5stesdr3wi@gf2zamk5amic
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Enable the previously added mitigation for VMscape. Add the cmdline
vmscape={off|ibpb|force} and sysfs reporting.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
The first thing __regmap_init() do is check if config is non-NULL,
so there is no need to check for this again later.
Fixes: d77e745613680c54 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/a154d9db0f290dda96b48bd817eb743773e846e1.1755090330.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There were already several commits to add module descriptions to regmap
modules. But this one was still missing:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-mmio.o
Signed-off-by: Luis Henriques <luis@igalia.com>
Link: https://patch.msgid.link/20250728150829.11890-1-luis@igalia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"These patches fix a lockdep issue Russell King reported with nested
regmap-irqs (unusual since regmap is generally for devices on slow
buses so devices don't get nested), plus add a missing mutex free
which I noticed while implementing a fix for that issue"
* tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Avoid lockdep warnings with nested regmap-irq chips
regmap: irq: Free the regmap-irq mutex
|
|
While handling interrupts through regmap-irq we use a mutex to protect the
updates we are caching while genirq runs in atomic context. Russell King
reported that while running on the nVidia Jetson Xavier NX this generates
lockdep warnings since that platform has a regmap-irq for the max77686 RTC
which is a child of a max77620 which also uses regmap-irq.
[ 46.723127] rtcwake/3984 is trying to acquire lock:
[ 46.723235] ffff0000813b2c68 (&d->lock){+.+.}-{4:4}, at: regmap_irq_lock+0x18/0x24
[ 46.723452]
but task is already holding lock:
[ 46.723556] ffff00008504dc68 (&d->lock){+.+.}-{4:4}, at: regmap_irq_lock+0x18/0x24
This happens because by default lockdep uses a single lockdep class for all
mutexes initialised from a single mutex_init() call and is unable to tell
that two distinct mutex are being taken and verify that the ordering of
operations is safe. This should be a very rare situation since normally
anything using regmap-irq will be a leaf interrupt controller due to being
on a slow bus like I2C.
We can avoid these warnings by providing the lockdep key for the regmap-irq
explicitly, allocating one for each chip so that lockdep can distinguish
between them.
Thanks to Russell for the report and analysis.
Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250731-regmap-irq-nesting-v1-2-98b4d1bf20f0@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We do not currently free the mutex allocated by regmap-irq, do so.
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250731-regmap-irq-nesting-v1-1-98b4d1bf20f0@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Leave powered-on genpds on until ->sync_state() or late_initcall_sync
- Export a common ->sync_state() helper for genpd providers
- Add generic ->sync_state() support
- Add a bus/driver for genpd provider-devices
- Introduce dev_pm_genpd_is_on() for consumers
pmdomain providers:
- cpuidle-psci: Drop redundant ->sync_state() support
- cpuidle-riscv-sbi: Drop redundant ->sync_state() support
- imx: Set ISI panic write for imx8m-blk-ctrl
- qcom: Add support for Glymur and Milos RPMh power-domains
- qcom: Use of_genpd_sync_state() for power-domains
- rockchip: Add support for the RK3528 variant
- samsung: Fix splash-screen handover by enforcing a ->sync_state()
- sunxi: Add support for Allwinner A523's PCK600 power-controller
- tegra: Opt-out from genpd's common ->sync_state() support for pmc
- thead: Instantiate a GPU power sequencer via the auxiliary bus
- renesas: Move init to postcore_initcalls
- xilinx: Move ->sync_state() support to firmware driver
- xilinx: Use of_genpd_sync_state() for power-domains
pmdomain consumers:
- remoteproc: imx_rproc: Fixup the detect/attach procedure for
pre-booted cores"
* tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (44 commits)
pmdomain: qcom: rpmhpd: Add Glymur RPMh Power Domains
dt-bindings: power: rpmpd: Add Glymur power domains
remoteproc: imx_rproc: detect and attach to pre-booted remote cores
remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
pmdomain: core: introduce dev_pm_genpd_is_on()
pmdomain: ti: Select PM_GENERIC_DOMAINS
pmdomain: sunxi: sun20i-ppu: change to tristate and enable for ARCH_SUNXI
pmdomain: sunxi: add driver for Allwinner A523's PCK-600 power controller
pmdomain: sunxi: sun20i-ppu: add A523 support
pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state
cpuidle: riscv-sbi: Drop redundant sync_state support
cpuidle: psci: Drop redundant sync_state support
pmdomain: core: Leave powered-on genpds on until sync_state
pmdomain: core: Leave powered-on genpds on until late_initcall_sync
pmdomain: core: Default to use of_genpd_sync_state() for genpd providers
driver core: Add dev_set_drv_sync_state()
pmdomain: core: Add common ->sync_state() support for genpd providers
driver core: Export get_dev_from_fwnode()
firmware: xilinx: Use of_genpd_sync_state()
firmware: xilinx: Don't share zynqmp_pm_init_finalize()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"A very quiet release for regmap this time, just two cleanup patches
and one almost cleanup patch which saves individual MMIO regmaps
flagging themselves as having fast I/O"
* tag 'regmap-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Annotate that MMIO implies fast IO
regmap: get rid of redundant debugfs_file_{get,put}()
regmap: kunit: Constify regmap_range_cfg array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As is tradition, cpufreq is the part with the largest number of
updates that include core fixes and cleanups as well as updates of
several assorted drivers, but there are also quite a few updates
related to system sleep, mostly focused on asynchronous suspend and
resume of devices and on making the integration of system suspend
and resume with runtime PM easier.
Runtime PM is also updated to allow some code duplication in drivers
to be eliminated going forward and to work more consistently overall
in some cases.
Apart from that, there are some driver core updates related to PM
domains that should help to address ordering issues with devm_ cleanup
routines relying on PM domains, some assorted devfreq updates
including core fixes and cleanups, tooling updates, and documentation
and MAINTAINERS updates.
Specifics:
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron
Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix
MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
(Prashant Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT
cpuidle driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the
device suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in
the runtime PM framework and update its documentation (Sakari
Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power
capping driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You
Use) principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make
the driver core detach PM domains in device_unbind_cleanup(), and
drop the dev_pm_domain_detach() call from the platform bus type
(Claudiu Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
Shenoy)"
* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
PM: docs: Use my kernel.org address in ABI docs and DT bindings
PM: hibernate: Fix up white space that does not follow coding style
PM: sleep: Rearrange suspend/resume error handling in the core
Documentation: amd-pstate:fix minimum performance state label error
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
kexec_core: Drop redundant pm_restore_gfp_mask() call
kexec_core: Fix error code path in the KEXEC_JUMP flow
PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: Exit governor when failed to start old governor
cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
cpufreq: Init policy->rwsem before it may be possibly used
cpufreq: Initialize cpufreq-based frequency-invariance later
cpufreq: Remove duplicate check in __cpufreq_offline()
cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
PM / devfreq: Add HiSilicon uncore frequency scaling driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull coredump updates from Christian Brauner:
"This contains an extension to the coredump socket and a proper rework
of the coredump code.
- This extends the coredump socket to allow the coredump server to
tell the kernel how to process individual coredumps. This allows
for fine-grained coredump management. Userspace can decide to just
let the kernel write out the coredump, or generate the coredump
itself, or just reject it.
* COREDUMP_KERNEL
The kernel will write the coredump data to the socket.
* COREDUMP_USERSPACE
The kernel will not write coredump data but will indicate to the
parent that a coredump has been generated. This is used when
userspace generates its own coredumps.
* COREDUMP_REJECT
The kernel will skip generating a coredump for this task.
* COREDUMP_WAIT
The kernel will prevent the task from exiting until the coredump
server has shutdown the socket connection.
The flexible coredump socket can be enabled by using the "@@"
prefix instead of the single "@" prefix for the regular coredump
socket:
@@/run/systemd/coredump.socket
- Cleanup the coredump code properly while we have to touch it
anyway.
Split out each coredump mode in a separate helper so it's easy to
grasp what is going on and make the code easier to follow. The core
coredump function should now be very trivial to follow"
* tag 'vfs-6.17-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (31 commits)
cleanup: add a scoped version of CLASS()
coredump: add coredump_skip() helper
coredump: avoid pointless variable
coredump: order auto cleanup variables at the top
coredump: add coredump_cleanup()
coredump: auto cleanup prepare_creds()
cred: add auto cleanup method
coredump: directly return
coredump: auto cleanup argv
coredump: add coredump_write()
coredump: use a single helper for the socket
coredump: move pipe specific file check into coredump_pipe()
coredump: split pipe coredumping into coredump_pipe()
coredump: move core_pipe_count to global variable
coredump: prepare to simplify exit paths
coredump: split file coredumping into coredump_file()
coredump: rename do_coredump() to vfs_coredump()
selftests/coredump: make sure invalid paths are rejected
coredump: validate socket path in coredump_parse()
coredump: don't allow ".." in coredump socket path
...
|
|
Merge miscellaneous power management updates and cpupower utility
updates for 6.17-rc1:
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
* pm-misc:
PM: docs: Use my kernel.org address in ABI docs and DT bindings
driver core: platform: Drop dev_pm_domain_detach() call
PM: domains: Detach on device_unbind_cleanup()
PM: domains: Add flags to specify power on attach/detach
PM: Don't use "proxy" headers
* pm-tools:
cpupower: Improve Python binding's Makefile
pm: cpupower: Fix printing of CORE, CPU fields in cpupower-monitor
pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
|
|
Merge runtime PM updates and power capping updates for 6.17-rc1:
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in the
runtime PM framework and update its documentation (Sakari Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power capping
driver (Zhang Rui)
* pm-runtime:
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
Documentation: PM: *_autosuspend() functions update last busy time
PM: runtime: Mark last busy stamp in pm_request_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend()
PM: runtime: Document return values of suspend-related API functions
* pm-powercap:
powercap: dtpm_cpu: Fix NULL pointer dereference in get_pd_power_uw()
powercap: intel_rapl: Add support for Bartlett Lake platform
powercap: intel_rapl_msr: Add PL4 support for Panther Lake
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix for a memory leak when we get an error during regmap init for a
bus that uses free_on_exit to clean up device specific data"
* tag 'regmap-fix-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix potential memory leak of regmap_bus
|
|
This adds support for allowing proactive reclaim in general on a NUMA
system. A per-node interface extends support for beyond a memcg-specific
interface, respecting the current semantics of memory.reclaim: respecting
aging LRU and not supporting artificially triggering eviction on nodes
belonging to non-bottom tiers.
This patch allows userspace to do:
echo "512M swappiness=10" > /sys/devices/system/node/nodeX/reclaim
One of the premises for this is to semantically align as best as possible
with memory.reclaim. During a brief time memcg did support nodemask until
55ab834a86a9 (Revert "mm: add nodes= arg to memory.reclaim"), for which
semantics around reclaim (eviction) vs demotion were not clear, rendering
charging expectations to be broken.
With this approach:
1. Users who do not use memcg can benefit from proactive reclaim. The
memcg interface is not NUMA aware and there are usecases that are
focusing on NUMA balancing rather than workload memory footprint.
2. Proactive reclaim on top tiers will trigger demotion, for which
memory is still byte-addressable. Reclaiming on the bottom nodes will
trigger evicting to swap (the traditional sense of reclaim). This
follows the semantics of what is today part of the aging process on
tiered memory, mirroring what every other form of reclaim does
(reactive and memcg proactive reclaim). Furthermore per-node proactive
reclaim is not as susceptible to the memcg charging problem mentioned
above.
3. Unlike the nodes= arg, this interface avoids confusing semantics,
such as what exactly the user wants when mixing top-tier and low-tier
nodes in the nodemask. Further per-node interface is less exposed to
"free up memory in my container" usecases, where eviction is intended.
4. Users that *really* want to free up memory can use proactive
reclaim on nodes knowingly to be on the bottom tiers to force eviction
in a natural way - higher access latencies are still better than swap.
If compelled, while no guarantees and perhaps not worth the effort,
users could also also potentially follow a ladder-like approach to
eventually free up the memory. Alternatively, perhaps an 'evict'
option could be added to the parameters for both memory.reclaim and
per-node interfaces to force this action unconditionally.
[akpm@linux-foundation.org: user_proactive_reclaim(): return -EBUSY on PGDAT_RECLAIM_LOCKED contention, per Roman]
[dave@stgolabs.net: memcg && node is also a bogus case, per Shakeel]
Link: https://lkml.kernel.org/r/20250717235604.2atyx2aobwowpge3@offworld
Link: https://lkml.kernel.org/r/20250623185851.830632-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The only user of the counter (FUSE) was removed in commit 0c58a97f919c
("fuse: remove tmp folio for writebacks and internal rb tree") so follow
the established pattern of removing the counter and hardcoding 0 in
meminfo output, as done recently with NR_BOUNCE. Update documentation for
procfs, including for the value for Bounce that was missed when removing
its counter.
Also remove the mention of NR_WRITEBACK_TEMP implications from a comment
in wb_position_ratio(). The rest of the comment there about fuse setting
bdi->max_ratio to 1% is still correct.
[vbabka@suse.cz: v2]
Link: https://lkml.kernel.org/r/5a848e15-6a57-4ecb-a015-d4f358b8a5d3@suse.cz
Link: https://lkml.kernel.org/r/20250625-nr_writeback_removal-v1-1-7f2a0df70faa@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joanne Koong <joannelkoong@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Maxim Patlasov <mpatlasov@parallels.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Notice that device_suspend_noirq(), device_suspend_late() and
device_suspend() all set async_error on errors, so they don't really
need to return a value. Accordingly, make them all void and use
async_error in their callers instead of their return values.
Moreover, since async_error is updated concurrently without locking
during asynchronous suspend and resume processing, use READ_ONCE() and
WRITE_ONCE() for accessing it in those places to ensure that all of the
accesses will be carried out as expected.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://patch.msgid.link/6198088.lOV4Wx5bFT@rjwysocki.net
|
|
|
|
Filesystems like resctrl use the cache-id exposed via sysfs to identify
groups of CPUs. The value is also used for PCIe cache steering tags. On
DT platforms cache-id is not something that is described in the
device-tree, but instead generated from the smallest CPU h/w id of the
CPUs associated with that cache.
CPU h/w ids may be larger than 32 bits.
Add a hook to allow architectures to compress the value from the devicetree
into 32 bits. Returning the same value is always safe as cache_of_set_id()
will stop if a value larger than 32 bits is seen.
For example, on arm64 the value is the MPIDR affinity register, which only
has 32 bits of affinity data, but spread accross the 64 bit field. An
arch-specific bit swizzle gives a 32 bit value.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20250711182743.30141-3-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the minimum CPU h/w id of the CPUs associated with the cache for the
cache 'id'. This will provide a stable id value for a given system. As
we need to check all possible CPUs, we can't use the shared_cpu_map
which is just online CPUs. As there's not a cache to CPUs mapping in DT,
we have to walk all CPU nodes and then walk cache levels.
The cache_id exposed to user-space has historically been 32 bits, and
is too late to change. This value is parsed into a u32 by user-space
libraries such as libvirt:
https://github.com/libvirt/libvirt/blob/master/src/util/virresctrl.c#L1588
Give up on assigning cache-id's if a CPU h/w id greater than 32 bits
is found.
match_cache_node() does not make use of the __free() cleanup helpers
because of_find_next_cache_node(prev) does not drop a reference to prev,
and its too easy to accidentally drop the reference on cpu, which belongs
to for_each_of_cpu_node().
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
[ ben: converted to use the __free cleanup idiom ]
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
[ morse: Add checks to give up if a value larger than 32 bits is seen. ]
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20250711182743.30141-2-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to drop the OF node reference taken when creating an auxiliary
device using auxiliary_device_create() when the device is later
released.
Fixes: eaa0d30216c1 ("driver core: auxiliary bus: add device creation helpers")
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20250708084654.15145-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For all practical purposes, there is no difference between the situation
in which a given device is not ignoring children and its active child
count is nonzero and the situation in which its runtime PM usage counter
is nonzero. However, pm_runtime_get_if_in_use() will only increment the
device's usage counter and return 1 in the latter case.
For consistency, make it do so in the former case either by adjusting
pm_runtime_get_conditional() and update the related kerneldoc comments
accordingly.
Fixes: c111566bea7c ("PM: runtime: Add pm_runtime_get_if_active()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+: c0ef3df8dbae: PM: runtime: Simplify pm_runtime_get_if_active() usage
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Link: https://patch.msgid.link/12700973.O9o76ZdvQC@rjwysocki.net
|
|
After commit aa7a9275ab81 ("PM: sleep: Suspend async parents after
suspending children"), the following scenario is possible:
1. Device A is async and it depends on device B that is sync.
2. Async suspend is scheduled for A before the processing of B is
started.
3. A is waiting for B.
4. In the meantime, an unrelated device fails to suspend and returns
an error.
5. The processing of B doesn't start at all and its power.completion is
not updated.
6. A is still waiting for B when async_synchronize_full() is called.
7. Deadlock ensues.
To prevent this from happening, update power.completion for all devices
on errors in all suspend phases, but do not do it directly for devices
that are already being processed or are waiting for the processing to
start because in those cases it may be necessary to wait for the
processing to actually complete before updating power.completion for
the device.
Fixes: aa7a9275ab81 ("PM: sleep: Suspend async parents after suspending children")
Fixes: 443046d1ad66 ("PM: sleep: Make suspend of devices more asynchronous")
Closes: https://lore.kernel.org/linux-pm/e13740a0-88f3-4a6f-920f-15805071a7d6@linaro.org/
Reported-and-tested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/6191258.lOV4Wx5bFT@rjwysocki.net
|
