summaryrefslogtreecommitdiff
path: root/drivers/block/drbd/drbd_int.h
AgeCommit message (Collapse)Author
2012-11-08drbd: Renamed the net_conf_update mutex to conf_updatePhilipp Reisner
Preparing to use the same mutex for disk_conf updates Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Generate the drbd_set_*_defaults() functions from drbd_genl.hAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Introduce a "lockless" variant of drbd_send_protocoll()Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename integrity_r_tfm -> peer_integrity_tfmAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename integrity_w_tfm -> integrity_tfmAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: on reconfiguration requests, mind the SET_DEFAULTS flagLars Ellenberg
The DRBD_GENL_F_SET_DEFAULTS flag was ignored for drbd_adm_disk_opts() and drbd_adm_net_opts(). Factor out drbd_set_*_defaults() helper functions, and call them appropriately. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Removed the OBJECT_DYING and the CONFIG_PENDING bitsPhilipp Reisner
superseded by refcounting Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Take a reference on tconn when finding a tconn by namePhilipp Reisner
Rule #3 of kref.txt Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Basic refcounting for drbd_tconnPhilipp Reisner
References hold by: * Each (running) drbd thread has a reference on tconn * Each mdev has a referenc on tconn * Beeing in the all_tconn list counts for one reference * Each after_conn_state_chg_work has a reference to tconn Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Eliminated drbd_free_resoruces() it is superseeded by conn_free_crypto()Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix setsockopt for user mode linuxLars Ellenberg
We use our own copy of kernel_setsockopt, and did not mess around with get_fs/set_fs, since we thought we knew we would always be KERNEL_DS anyways. Apparently not so for at least user mode linux, so put the set_fs(KERNEL_DS) in there. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Considering that the two_primaries config flag can changePhilipp Reisner
Now since it is possible to change the two_primaries config flag while the connection is up, make sure we treat a peer_req in a consistent way if the config flag changes while the peer_req is under IO. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Proper locking for updates to net_conf under RCUPhilipp Reisner
Removing the get_net_conf()/put_net_conf() functions Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: rcu_read_lock() and rcu_dereference() for tconn->net_confPhilipp Reisner
Removing the get_net_conf()/put_net_conf() calls Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Runtime changeable wire protocolPhilipp Reisner
The wire protocol is no longer a property that is negotiated between the two peers. It is now expressed with two bits (DP_SEND_WRITE_ACK and DP_SEND_RECEIVE_ACK) in each data packet. Therefore the primary node is free to change the wire protocol at any time without disconnect/reconnect. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: protect all idr accesses that might sleep with drbd_cfg_rwsemPhilipp Reisner
With this commit the locking for all accesses to IDRs is complete: * Non sleeping read accesses are protected by RCU * sleeping read accesses are protocted by a read lock on drbd_cfg_rwsem * accesses that add anything are protected by a write lock * accesses that remove an object are protoected by a write lock and a call to synchronize_rcu() after it is removed from the IDR and before the object is actually free()ed. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Converted drbd_cfg_mutex into drbd_cfg_rwsemPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Inlined drbd_free_mdev(); it got called only from one placePhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: drbd_delete_device() takes a struct drbd_conf * nowPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_pp_alloc() to drbd_alloc_pages() and make it non-staticAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Make drbd_wait_ee_list_empty() and _drbd_wait_ee_list_empty() staticAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_{ ee -> peer_req }_has_active_pageAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_release_ee() to drbd_free_peer_reqs()Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_free_ee() and variants to *_peer_req()Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename drbd_alloc_ee() to drbd_alloc_peer_req()Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Removed outdated comments and code that envisioned VNRs in header 95Andreas Gruenbacher
Since have now header 100, that has space for 16 bit volume numbers, the high byte of the length in header 95 is no longer reserved for 8 bit volume numbers. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Introduce protocol version 100 headersAndreas Gruenbacher
The 8 byte header finally becomes too small. With the protocol 100 header we have 16 bit for the volume number, proper 32 bit for the data length, and 32 bit for further extensions in the future. Previous versions of drbd are using version 80 headers for all packets short enough for protocol 80. They support both header versions in worker context, but only version 80 headers in asynchronous context. For backwards compatibility, continue to use version 80 headers for short packets before protocol version 100. From protocol version 100 on, use the same header version for all packets. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Remove headers from on-the-wire data structures (struct p_*)Andreas Gruenbacher
Prepare the introduction of the protocol 100 headers. The actual protocol header is removed for the packet declarations. I.e. allow us to use the packets with different headers. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Remove some fixed header size assumptionsAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Remove now-unused int_dig_out bufferAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Replace and remove old primitivesAndreas Gruenbacher
Centralize sock->mutex locking and unlocking in [drbd|conn]_prepare_command() and [drbd|conn]_send_comman(). Therefore all *_send_* functions are touched to use these primitives instead of drbd_get_data_sock()/drbd_put_data_sock() and former helper functions. That change makes the *_send_* functions more standardized. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Introduce drbd_header_size()Andreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Introduce new primitives for sending commandsAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Introduced a new type union drbd_dev_statePhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Moved susp, susp_nod and susp_fen to the connection objectPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Renamed id_susp(union drbd_state s) to drbd_suspended(struct drbd_conf *)Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Introduced drbd_read_state()Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: get rid of bio_split, allow bios of "arbitrary" sizeLars Ellenberg
Where "arbitrary" size is currently 1 MiB, which is the BIO_MAX_SIZE for architectures with 4k PAGE_CACHE_SIZE (most). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: preparation commit, pass drbd_interval to drbd_al_begin/complete_ioLars Ellenberg
We want to avoid bio_split for bios crossing activity log boundaries. So we may need to activate two activity log extents "atomically". drbd_al_begin_io() needs to know more than just the start sector. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Change how the "handshake" packets are calledAndreas Gruenbacher
Packets of type P_HAND_SHAKE define which protocol versions and features a node supports. For clarity, call those packets P_CONNECTION_FEATURES instead. (This does not determine the features that a specific drbd device supports, such as drbd protocol A, B, C.) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Change how the initial packets are calledAndreas Gruenbacher
The first packets exchanged when a connection is established are referred to as P_HAND_SHAKE_S and P_HAND_SHAKE_M in the code, followed by P_HAND_SHAKE packets. To avoid confusion between these two unrelated things, call the initial packets P_INITIAL_DATA and P_INITIAL_META. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: _conn_send_cmd(), _drbd_send_cmd(): Pass a struct drbd_socket instead ↵Andreas Gruenbacher
of a plain socket Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Preallocate one page per drbd_socket as a send bufferAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Preallocate one page per drbd_socket as a receive bufferAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Converted drbd_try_outdate_peer() from mdev to tconnPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename the DCBP_* functions to dcbp_* and move them to where they are usedAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Make _drbd_send_bitmap() staticAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Move drbd_send_ping() and drbd_send_ping_ack() to drbd_main.cAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Get rid of typedef drbd_work_cbAndreas Gruenbacher
This type is not used anywhere else. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename various functions from *_oos_* to *_out_of_sync_* for clarityAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
generated by cgit (git 2.34.1) at 2025-10-01 01:53:16 +0000