summaryrefslogtreecommitdiff
path: root/drivers/block/drbd/drbd_int.h
AgeCommit message (Collapse)Author
2010-10-14drbd: use rolling marks for resync speed calculationLars Ellenberg
The current resync speed as displayed in /proc/drbd fluctuates a lot. Using an array of rolling marks makes this calculation much more stable. We used to have this (a long time ago with 0.7), but it got lost somehow. If "stalled", do not discard the rest of the information, just add a " (stalled)" tag to the progress line. This patch also shortens a spinlock critical section somewhat, and reduces the number of atomic operations in put_ldev. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: remove outdated comment and dead codeLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: let drbd_free_ee implicitly free any digestLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Replaced some casts by an union. Improved commentsPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: The new, smarter resync speed controllerPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: New sync_param packet, that includes the parameters of the new controllerPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Do not try to free tl_hash in drbd_disconnect() when IO is suspendedPhilipp Reisner
We may not free tl_hash when IO is suspended, since we can not wait until ap_bio_cnt reaches zero. We can do this after susp reched 0, since then tl_clear was called Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Fixed a deadlock, probably only affected UP machinesPhilipp Reisner
After disconnect (most likely mdev->net_cnt == 0) and we are still in an unstable state (!drbd_state_is_stable()). When we get an IO request in drbd_get_max_buffers() (called from __inc_ap_bio_cond(), called from inc_ap_bio()) we wake up misc_wait. Misc_wait is also used in inc_ap_bio() to sleep until the outcome of __inc_ap_bio_cond() changes. => Busy loop! Solution: Have a dedicated wait queue for get_net_conf() and put_net_conf(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Delayed creation of current-UUIDPhilipp Reisner
When a fencing policy of "resource-and-stonith" is configured, and DRBD looses connection to it's peer, we can delay the creation of a new current-UUID until IO gets thawed. That allows one to deploy fence-peer handlers that actually commit suicide on the machine they get started. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Run the fence-peer helper asynchronouslyPhilipp Reisner
Since we can not thaw the transfer log, the next logical step is to allow reconnects while the fence-peer handler runs. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: Finished the "on-no-data-accessible suspend-io;" functionalityPhilipp Reisner
When no data is accessible (no connection to the peer, nor a local disk) allow the user to select to freeze all IO operations instead of getting IO errors. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: factored tl_restart() out of tl_clear().Philipp Reisner
If IO was frozen for a temporal network outage, resend the content of the transfer-log into the newly established connection. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-10-14drbd: renamed drbd_tl_epoch.n_req to drbd_tl_epoch.n_writesPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-09-16block: remove BLKDEV_IFL_WAITChristoph Hellwig
All the blkdev_issue_* helpers can only sanely be used for synchronous caller. To issue cache flushes or barriers asynchronously the caller needs to set up a bio by itself with a completion callback to move the asynchronous state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always specified when calling blkdev_issue_* and also remove the now unused flags argument to blkdev_issue_flush and blkdev_issue_zeroout. For blkdev_issue_discard we need to keep it for the secure discard flag, which gains a more descriptive name and loses the bitops vs flag confusion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07drbd: revert "delay probes", feature is being re-implemented differentlyLars Ellenberg
It was a now abandoned attempt to throttle resync bandwidth based on the delay it causes on the bulk data socket. It has no userbase yet, and has been disabled by 9173465ccb51c09cc3102a10af93e9f469a0af6f already. This removes the now unused code. The basic feature, namely using up "idle" bandwith of network and disk IO subsystem, with minimal impact to application IO, is being reimplemented differently. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-01drbd: use drbd specific ratelimit instead of global printk_ratelimitLars Ellenberg
using the global printk_ratelimit() may mask other messages. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-01drbd: Removed the now empty w_io_error() functionPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-01drbd: improve network latency, TCP_QUICKACKLars Ellenberg
On Thu, Apr 29, 2010 at 04:00:50PM -0400, Eduard.Guzovsky@stratus.com wrote on drbd-dev@lists.linbit.com Subject: [Drbd-dev] DRBD small synchronous writes performance improvements > 1. TCP_QUICKACK option is set incorrectly. The goal was force TCP to > send and ACK as a "one time" event. Instead the code permanently sets > connection in the QUICKACK mode. He is right, we actually want to use an even val with TCP_QUICKACK. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-01drbd: Revert "drbd: Create new current UUID as late as possible"Philipp Reisner
The late-UUID writing is delayed until the next release. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-05-18drbd: Create new current UUID as late as possiblePhilipp Reisner
The choice was to either delay creation of the new UUID until IO got thawed or to delay it until the first IO request. Both are correct, the later is more friendly to users of dual-primary setups, that actually only write on one side. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: If we detect late that IO got frozen, retry after we thawed.Philipp Reisner
If we detect late (= after grabing mdev->req_lock) that IO got frozen, we return 1 to generic_make_request(), which simply will retry to make a request for that bio. In the subsequent call of generic_make_request() into drbd_make_request_26() we sleep in inc_ap_bio(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: Allow drbd_epoch_entries to use multiple bios.Lars Ellenberg
This should allow for better performance if the lower level IO stack of the peers differs in limits exposed either via the queue, or via some merge_bvec_fn. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: reduce sizeof struct drbd_epoch_entry by 8 byte by aligning membersLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: Fixes to the new delay_probes codePhilipp Reisner
* Only send delay_probes with protocol 93 or newer * drbd_send_delay_probes() is called only from worker context, no atomic_t needed for delay_seq Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: A fixes to the new resync speed codePhilipp Reisner
* Mention P_DELAY_PROBE in the packet naming array * Do not corrupt the mdev->data.work list in case the timer goes off before delay_probe_work got handled by the worker * Do not mod_timer() twice for a single delay_probe pair Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: Actually send delay probesPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: Sending of delay_probesPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: Receiving of delay_probesPhilipp Reisner
Delay_probes are new packets in the DRBD protocol, which allow DRBD to know the current delay packets have on the data socket. (relative to the meta data socket) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: Added transmission faults to the fault injection codePhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: Implemented flags for the resize packetPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: Implemented the set_new_bits parameter for drbd_bm_resize()Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-05-18drbd: made determin_dev_size's parameter an flag enumPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-04-28blkdev: generalize flags for blkdev_issue_fn functionsDmitry Monakhov
The patch just convert all blkdev_issue_xxx function to common set of flags. Wait/allocation semantics preserved. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-19Merge branch 'master' into for-linusJens Axboe
Conflicts: block/Kconfig Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-11drbd: Reduce the time an empty resync takes usuallyPhilipp Reisner
This mitigates changes introduced with commit: http://git.drbd.org/?p=drbd-8.3.git;a=commit;h=4b6803a3276652da3737 Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-03-11drbd: add missing drbd command names to avoid <NULL> in error messagesLars Ellenberg
cmdname() should map command number to its human readable representation. The string table was incomplete, though. Maybe rather do a switch() block, and let the compiler help us to keep it complete? Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-03-11drbd: --dry-run option for drbdsetup net ( drbdadm -- --dry-run connect <res> )Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-02-09tree-wide: Assorted spelling fixesDaniel Mack
In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-12drbd: Allow online resizing of DRBD devices while peer not reachable (needs ↵Philipp Reisner
to be explicitly forced) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2010-01-07drbd: check on CONFIG_LBDAF, not LBDLars Ellenberg
It is called LBDAF since 2.6.31. impact: without this change, on 32bit, DRBD would wrongly claim to only support 2TiB devices. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2009-12-21drbd: Constify struct file_operationsEmese Revfy
Signed-off-by: Emese Revfy <re.emese@gmail.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2009-10-07drbd: needs __ratelimit()Randy Dunlap
drbd_int.h uses __ratelimit(), so it needs to #include ratelimit.h: drivers/block/drbd/drbd_int.h:1765: error: implicit declaration of function '__ratelimit' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: drbd-dev@lists.linbit.com Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01drbd: remove tracing bitsJens Axboe
They should be reimplemented in the current scheme. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01The DRBD driverPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
generated by cgit (git 2.34.1) at 2025-10-03 10:12:20 +0000