summaryrefslogtreecommitdiff
path: root/drivers/block/drbd
AgeCommit message (Collapse)Author
2012-05-09drbd: moved md_io into mdevPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Immediately allow completion of IOs, that wait for IO completions on a ↵Philipp Reisner
failed disk Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Keep a reference to barrier acked requestsPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Improve compatibility with drbd's older than 8.3.7Philipp Reisner
Regression introduced with 8.3.11 commit: drbd: Take a more conservative approach when deciding max_bio_size Never ever tell an older drbd, that we support more than 32KiB in a single data request (packet). Never believe an older drbd, that is supports more than 32KiB in a single data request (packet) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Only print sanitize state's warnings, if the state change happensPhilipp Reisner
The reason for this change is that, with when doing 'drbdadm invalidate' on a disconnected resource caused an "implicitly set pdsk from UpToDate to DUnknown" message, which was missleading. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: downgraded error printk to infoLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09DRBD: Fix comparison always false warning due to long/long long compareDavid Howells
Fix warnings of the following nature in the drbd header: In file included from drivers/block/drbd/drbd_bitmap.c:32: drivers/block/drbd/drbd_int.h: In function 'drbd_get_syncer_progress': drivers/block/drbd/drbd_int.h:2234: warning: comparison is always false due to limited range of data where mdev->rs_total (an unsigned long) is being compared to 1ULL << 32, which is always false on a 32-bit machine. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2012-05-09drbd: spelling fix: too smallLars Ellenberg
It is not "to small", but "too small". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: cosmetic: fix accidental division instead of modulo when pretty printingLars Ellenberg
For large resync rates, seq_printf_with_thousands_grouping() accidentally only produced Y,000,00Y, instead of the real numbers. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-05-09drbd: Lower log priority for an event that is definitely not an errorPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-04-21sock: Introduce named constants for sk_reusePavel Emelyanov
Name them in a "backward compatible" manner, i.e. reuse or not are still 1 and 0 respectively. The reuse value of 2 means that the socket with it will forcibly reuse everyone else's port. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-23usermodehelper: use UMH_WAIT_PROC consistentlyOleg Nesterov
A few call_usermodehelper() callers use the hardcoded constant instead of the proper UMH_WAIT_PROC, fix them. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Januszewski <spock@gentoo.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-20drbd: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20block: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-04Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
2011-10-19Merge branch 'v3.1-rc10' into for-3.2/coreJens Axboe
Conflicts: block/blk-core.c include/linux/blkdev.h Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-14drbd: get rid of drbd_bcast_ee, it is of no use anymoreLars Ellenberg
This function was used to broadcast the (leading part of the) bio payload in case we see a data integrity error. It could be received from userland with the drbdsetup events subcommand, to have a peek into the payload that caused the checksum mismatch, and guess from there what may have caused the mismatch, mainly to guess wether it was modification of in-flight data, or data corruption by broken hardware or software bugs. Meanwhile we support bios that are larger than the maximum payload a netlink datagram can carry. And we have means to reliably detect modification of in-flight data by calculating, and comparing, the checksum before and after sendmsg. There is no need to carry this around anymore. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: fix drbd_delete_device: remove vnr from volumes; idr_remove(); ↵Lars Ellenberg
synchronize_rcu(); before cleanup Still missing: rcu_readlock() on the various call sites that access/iterate over those idrs. We don't need a specific write lock, as we only modify from configuration context, which is already strictly serialized. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: introduce a bio_set to allocate housekeeping bios fromLars Ellenberg
Don't rely on availability of bios from the global fs_bio_set, we should use our own bio_set for meta data IO. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: use the newly introduced page pool for bitmap IOLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: add page pool to be used for meta data IOLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: only wakeup if something changed in update_peer_seqLars Ellenberg
This commit got it wrong: drbd: Make the peer_seq updating code more obvious Make it more clear that update_peer_seq() is supposed to wake up the seq_wait queue whenever the sequence number changes. We don't need to wake up everytime we receive a sequence number that is _different_ from our currently stored "newest" sequence number, but only if we receive a sequence number _newer_ than what we already have, when we actually change mdev->peer_seq. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: remove unused defineLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Replaced the minor_table array by an idrPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Implemented new commands to create/delete connections/minorsPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Converted drbd_nl_(net_conf|disconnect)() from mdev to tconnPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Preparing the connector interface to operator on connectionsPhilipp Reisner
Up to now it only operated on minor numbers. Now it can work also on named connections. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Converted the transfer log from mdev to tconnPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Improved the dec_*() macrosPhilipp Reisner
Now those can be used with a struct drbd_conf * that has an other name than 'mdev'. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Removed the mdev parameter from the ..to_tags() and ...from_tags() ↵Philipp Reisner
functions Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Reworked the unconfiguring and thread stopping codePhilipp Reisner
* Moved CONFIG_PENDING and DEVICE_DYING from mdev to tconn. * Renamed drbd_reconfig_start() and drbd_reconfig_done() to conn_reconfig_start() and conn_reconfig_done(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Remove left-over function prototypesAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Replace get_asender_cmd() with its implementationAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Get rid of P_MAX_CMDAndreas Gruenbacher
Instead of artificially enlarging the command decoding arrays to P_MAX_CMD entries, check if an index is within the valid range using the ARRAY_SIZE() macro. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Remove redundant checkAndreas Gruenbacher
Opening a device only succeeds on a primary node, or when explicitly setting the allow_oos module parameter to allow opening the device read-only on a secondary node. There is no other way that a request can get into drbd_make_request(), so this code cannot trigger. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Improve how conflicting writes are handledAndreas Gruenbacher
The previous algorithm for dealing with overlapping concurrent writes was generating unnecessary warnings for scenarios which could be legitimate, and did not always handle partially overlapping requests correctly. Improve it algorithm as follows: * While local or remote write requests are in progress, conflicting new local write requests will be delayed (commit 82172f7). * When a conflict between a local and remote write request is detected, the node with the discard flag decides how to resolve the conflict: It will ask its peer to discard conflicting requests which are fully contained in the local request and retry requests which overlap only partially. This involves a protocol change. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Use ping-timeout when waiting for missing ack packetsAndreas Gruenbacher
When the node with the discard flag resolves write conflicts in dual-primary mode, it may determine that its peer has sent ack packets on the metadata socket which did not arrive, yet. Wait for the next ack with ping-timeout instead of a hard-coded 30 seconds. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Replace atomic_add_return with atomic_inc_returnAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Concurrent write detection fixAndreas Gruenbacher
Commit 9b1e63e changed the concurrent write detection algorithm to only insert peer requests into write_requests tree after determining that there is no conflict. With this change, new conflicting local requests could be added while the algorithm runs, but this case was not handled correctly. Instead of making the algorithm deal with this case, switch back to adding peer requests to the write_requests tree immediately: this improves fairness. When a peer request is discarded, remove that request from the write_requests Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: Use container_of() instead of castingAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: fix a wrong likely(), updated commentsLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: silence some log messages on bitmap IOLars Ellenberg
Summary log messages meant for global bitmap IO should not be printed for bitmap IO caused by activity log transactions. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: new on-disk activity log transaction formatLars Ellenberg
Use a new on-disk transaction format for the activity log, which allows for multiple changes to the active set per transaction. Using 4k transaction blocks, we can now get rid of the work-around code to deal with devices not supporting 512 byte logical block size. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14lru_cache: allow multiple changes per transactionLars Ellenberg
Allow multiple changes to the active set of elements in lru_cache. The only current user of lru_cache, drbd, is driving this generalisation. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: allow to select specific bitmap pages for writeoutLars Ellenberg
We are about to allow several changes to the active set in one activity log transaction. We have to write out the corresponding bitmap pages as well, if changed. Introduce drbd_bm_mark_for_writeout(), then re-use the existing bitmap writeout path to submit all marked pages in one go. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: use clear_bit_unlock() where appropriateLars Ellenberg
Some open-coded clear_bit(); smp_mb__after_clear_bit(); should in fact have been smp_mb__before_clear_bit(); clear_bit(); Instead, use clear_bit_unlock() to annotate the intention, and have it do the right thing. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: in drbd_suspend_al, set AL_SUSPENDED before unlocking the activity logLars Ellenberg
As using an empty activity log is the whole point of the excercise, make sure it is still empty when setting AL_SUSPENDED. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: fix typo in commentLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: simplify condition in drbd_may_do_local_read()Lars Ellenberg
fold if (x >= (N+1)) return 0; if (x < N) return 0; into if (x != N) return 0; Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
generated by cgit (git 2.34.1) at 2025-10-02 15:13:32 +0000