summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2016-07-19tpm2_i2c_nuvoton: add irq validity checkAndrew Zamansky
In 570a3609 IRQ path is incorrectly always exercised while it should be exercised only when there is an IRQ number allocated. This commit reverts the old behavior. [jarkko.sakkinen@linux.intel.com: updated description] Fixes: 570a36097f3 ("tpm: drop 'irq' from struct tpm_vendor_specific") Signed-off-by: Andrew Zamansky <andrew.zamansky@nuvoton.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-07-19tpm: read burstcount from TPM_STS in one 32-bit transactionAndrey Pronin
Some chips incorrectly support partial reads from TPM_STS register at non-zero offsets. Read the entire 32-bits register instead of making two 8-bit reads to support such devices and reduce the number of bus transactions when obtaining the burstcount from TPM_STS. Fixes: 27084efee0c3 ("tpm: driver for next generation TPM chips") Signed-off-by: Andrey Pronin <apronin@chromium.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-07-19tpm: fix byte-order for the value read by tpm2_get_tpm_ptapronin@chromium.org
The result must be converted from BE byte order, which is used by the TPM2 protocol. This has not popped out because tpm2_get_tpm_pt() has been only used for probing. Fixes: 7a1d7e6dd76a ("tpm: TPM 2.0 baseline support") Change-Id: I7d71cd379b1a3b7659d20a1b6008216762596590 Signed-off-by: Andrey Pronin <apronin@chromium.org> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-07-19tpm_tis_core: convert max timeouts from msec to jiffiesapronin@chromium.org
tpm_tis_core was missing conversion from msec when assigning max timeouts from constants. Fixes: aec04cbdf723 ("tpm: TPM 2.0 FIFO Interface") Signed-off-by: Andrey Pronin <apronin@chromium.org> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-07-14dsp56k: prevent a harmless underflowDan Carpenter
There is a mistake here where we don't allow "len" to be zero but we allow negative lengths. It's basically harmless in this case, but the underflow makes my static checker complain. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-08x86/mm/pat, /dev/mem: Remove superfluous error messageJiri Kosina
Currently it's possible for broken (or malicious) userspace to flood a kernel log indefinitely with messages a-la Program dmidecode tried to access /dev/mem between f0000->100000 because range_is_allowed() is case of CONFIG_STRICT_DEVMEM being turned on dumps this information each and every time devmem_is_allowed() fails. Reportedly userspace that is able to trigger contignuous flow of these messages exists. It would be possible to rate limit this message, but that'd have a questionable value; the administrator wouldn't get information about all the failing accessess, so then the information would be both superfluous and incomplete at the same time :) Returning EPERM (which is what is actually happening) is enough indication for userspace what has happened; no need to log this particular error as some sort of special condition. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1607081137020.24757@cbobk.fhfr.pm Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-03random: strengthen input validation for RNDADDTOENTCNTTheodore Ts'o
Don't allow RNDADDTOENTCNT or RNDADDENTROPY to accept a negative entropy value. It doesn't make any sense to subtract from the entropy counter, and it can trigger a warning: random: negative entropy/overflow: pool input count -40000 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 6828 at drivers/char/random.c:670[< none >] credit_entropy_bits+0x21e/0xad0 drivers/char/random.c:670 Modules linked in: CPU: 3 PID: 6828 Comm: a.out Not tainted 4.7.0-rc4+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffffffff880b58e0 ffff88005dd9fcb0 ffffffff82cc838f ffffffff87158b40 fffffbfff1016b1c 0000000000000000 0000000000000000 ffffffff87158b40 ffffffff83283dae 0000000000000009 ffff88005dd9fcf8 ffffffff8136d27f Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff82cc838f>] dump_stack+0x12e/0x18f lib/dump_stack.c:51 [<ffffffff8136d27f>] __warn+0x19f/0x1e0 kernel/panic.c:516 [<ffffffff8136d48c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:551 [<ffffffff83283dae>] credit_entropy_bits+0x21e/0xad0 drivers/char/random.c:670 [< inline >] credit_entropy_bits_safe drivers/char/random.c:734 [<ffffffff8328785d>] random_ioctl+0x21d/0x250 drivers/char/random.c:1546 [< inline >] vfs_ioctl fs/ioctl.c:43 [<ffffffff8185316c>] do_vfs_ioctl+0x18c/0xff0 fs/ioctl.c:674 [< inline >] SYSC_ioctl fs/ioctl.c:689 [<ffffffff8185405f>] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:680 [<ffffffff86a995c0>] entry_SYSCALL_64_fastpath+0x23/0xc1 arch/x86/entry/entry_64.S:207 ---[ end trace 5d4902b2ba842f1f ]--- This was triggered using the test program: // autogenerated by syzkaller (http://github.com/google/syzkaller) int main() { int fd = open("/dev/random", O_RDWR); int val = -5000; ioctl(fd, RNDADDTOENTCNT, &val); return 0; } It's harmless in that (a) only root can trigger it, and (b) after complaining the code never does let the entropy count go negative, but it's better to simply not allow this userspace from passing in a negative entropy value altogether. Google-Bug-Id: #29575089 Reported-By: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-07-03random: add backtracking protection to the CRNGTheodore Ts'o
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-07-03random: make /dev/urandom scalable for silly userspace programsTheodore Ts'o
On a system with a 4 socket (NUMA) system where a large number of application threads were all trying to read from /dev/urandom, this can result in the system spending 80% of its time contending on the global urandom spinlock. The application should have used its own PRNG, but let's try to help it from running, lemming-like, straight over the locking cliff. Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-07-03random: replace non-blocking pool with a Chacha20-based CRNGTheodore Ts'o
The CRNG is faster, and we don't pretend to track entropy usage in the CRNG any more. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-07-02Back-merge tag 'v4.7-rc5' into drm-nextDave Airlie
Linux 4.7-rc5 The fsl-dcu pull needs -rc3 so go to -rc5 for now.
2016-06-29powerpc/powernv: Add driver for operator panel on FSP machinesSuraj Jitindar Singh
Implement new character device driver to allow access from user space to the operator panel display present on IBM Power Systems machines with FSPs. This will allow status information to be presented on the display which is visible to a user. The driver implements a character buffer which a user can read/write by accessing the device (/dev/op_panel). This buffer is then displayed on the operator panel display. Any attempt to write past the last character position will have no effect and attempts to write more characters than the size of the display will be truncated. The device may only be accessed by a single process at a time. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-27hwrng: omap - Fix assumption that runtime_get_sync will always succeedNishanth Menon
pm_runtime_get_sync does return a error value that must be checked for error conditions, else, due to various reasons, the device maynot be enabled and the system will crash due to lack of clock to the hardware module. Before: 12.562784] [00000000] *pgd=fe193835 12.562792] Internal error: : 1406 [#1] SMP ARM [...] 12.562864] CPU: 1 PID: 241 Comm: modprobe Not tainted 4.7.0-rc4-next-20160624 #2 12.562867] Hardware name: Generic DRA74X (Flattened Device Tree) 12.562872] task: ed51f140 ti: ed44c000 task.ti: ed44c000 12.562886] PC is at omap4_rng_init+0x20/0x84 [omap_rng] 12.562899] LR is at set_current_rng+0xc0/0x154 [rng_core] [...] After the proper checks: [ 94.366705] omap_rng 48090000.rng: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info [ 94.375767] omap_rng 48090000.rng: Failed to runtime_get device -19 [ 94.382351] omap_rng 48090000.rng: initialization failed. Fixes: 665d92fa85b5 ("hwrng: OMAP: convert to use runtime PM") Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-26mn10300: use RTC_DRV_CMOS instead of CONFIG_RTCArnd Bergmann
nn10300 has a dependency on mc146818_get_time/mc146818_set_time, which we want to move from the mc146818rtc.h header into the rtc subsystem, which in turn is not usable on mn10300. This changes mn10300 to use the modern rtc-cmos driver instead of the old RTC driver, and that in turn lets us completely remove the read_persistent_clock/update_persistent_clock callbacks. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-25tpm_crb: fix address space of the return pointer in crb_map_res()Jarkko Sakkinen
When running make C=2 M=drivers/char/tpm/ CHECK drivers/char/tpm//tpm_crb.c drivers/char/tpm//tpm_crb.c:248:31: warning: incorrect type in return expression (different address spaces) drivers/char/tpm//tpm_crb.c:248:31: expected void [noderef] <asn:2>* drivers/char/tpm//tpm_crb.c:248:31: got void * CC: stable@vger.kernel.org Fixes: 1bd047be37d9 ("tpm_crb: Use devm_ioremap_resource") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2016-06-25tpm_vtpm_proxy: fix address space of a user pointer in vtpmx_fops_ioctl()Jarkko Sakkinen
When running make C=2 M=drivers/char/tpm/ CC [M] drivers/char/tpm//tpm_crb.o CHECK drivers/char/tpm//tpm_vtpm_proxy.c drivers/char/tpm//tpm_vtpm_proxy.c:552:32: warning: incorrect type in assignment (different address spaces) drivers/char/tpm//tpm_vtpm_proxy.c:552:32: expected struct vtpm_proxy_new_dev *vtpm_new_dev_p drivers/char/tpm//tpm_vtpm_proxy.c:552:32: got void [noderef] <asn:1>*argp drivers/char/tpm//tpm_vtpm_proxy.c:553:51: warning: incorrect type in argument 2 (different address spaces) drivers/char/tpm//tpm_vtpm_proxy.c:553:51: expected void const [noderef] <asn:1>*from drivers/char/tpm//tpm_vtpm_proxy.c:553:51: got struct vtpm_proxy_new_dev *vtpm_new_dev_p drivers/char/tpm//tpm_vtpm_proxy.c:559:34: warning: incorrect type in argument 1 (different address spaces) drivers/char/tpm//tpm_vtpm_proxy.c:559:34: expected void [noderef] <asn:1>*to drivers/char/tpm//tpm_vtpm_proxy.c:559:34: got struct vtpm_proxy_new_dev *vtpm_new_dev_p The __user annotation was missing from the corresponding variable. Fixes: 794c38e01358 ("tpm: Proxy driver for supporting multiple emulated TPMs") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2016-06-25tpm/tpm_tis_spi: Add support for spi phyChristophe Ricard
Spi protocol standardized by the TCG is now supported by most of TPM vendors. It supports SPI Bit Protocol as describe in the TCG PTP specification (chapter 6.4.6 SPI Bit Protocol). Irq mode is not supported. This commit is based on the initial work by Peter Huewe. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phyChristophe Ricard
To avoid code duplication between the old tpm_tis and the new and future native tcg tis driver(ie: spi, i2c...), the tpm_tis driver was reworked, so that all common logic is extracted and can be reused from all drivers. The core methods can also be used from other TIS like drivers. itpm workaround is now managed with a specific tis flag TPM_TIS_ITPM_POSSIBLE. This commit is based on the initial work by Peter Huewe. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm_tis: Introduce intermediate layer for TPM accessChristophe Ricard
This splits tpm_tis in a high-level protocol part and a low-level interface for the actual TPM communication. The low-level interface can then be implemented by additional drivers to provide access to TPMs using other mechanisms, for example native I2C or SPI transfers, while still reusing the same TIS protocol implementation. Though the ioread/iowrite calls cannot fail, other implementations of this interface might want to return error codes if their communication fails. This follows the usual pattern of negative values representing errors and zero representing success. Positive values are not used (yet). Errors are passed back to the caller if possible. If the interface of a function does not allow that, it tries to do the most sensible thing it can, but this might also mean ignoring the error in this instance. This commit is based on the initial work by Peter Huewe. Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: tpm_tis: Share common data between physChristophe Ricard
Split priv_data structure in common and phy specific structures. This will allow in future patches to reuse the same tis logic on top of new phy such as spi and i2c. Ultimately, other drivers may reuse this tis logic. (e.g: st33zp24...) iobase field is specific to TPM addressed on 0xFED4xxxx on LPC/SPI bus. This commit is based on the initial work by Peter Huewe. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: Add include guards in tpm.hChristophe Ricard
Add missing include guards in tpm.h Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: Fix suspend regressionStefan Berger
Fix the suspend regression due to the wrong way of retrieving the chip structure. The suspend functions are attached to the hardware device, not the chip and thus must rely on drvdata. Fixes: e89f8b1ade9cc1a ("tpm: Remove all uses of drvdata from the TPM Core") Reported-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Jeremiah Mahler <jmmahler@gmail.com> Acked-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
2016-06-25tpm: fix for typo in tpm/tpm_ibmvtpm.cStephen Rothwell
Fixes: 28157164b056 ("tpm: Remove useless priv field in struct tpm_vendor_specific") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: select ANON_INODES for proxy driverArnd Bergmann
The newly added vtpmx driver fails to build if CONFIG_ANON_INODES is disabled: drivers/char/built-in.o: In function `vtpmx_fops_ioctl': (.text+0x97f8): undefined reference to `anon_inode_getfile' This adds a Kconfig 'select' statement to ensure it's always there when we need it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 794c38e01358 ("tpm: Proxy driver for supporting multiple emulated TPMs") Acked-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: Fix IRQ unwind ordering in TISJason Gunthorpe
The devm for the IRQ was placed on the chip, not the pdev. This can cause the irq to be still callable after the pdev has been cleaned up (eg priv kfree'd). Found by CONFIG_DEBUG_SHIRQ=y Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Fixes: 233a065e0cd0 ("tpm: Get rid of chip->pdev") Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: Proxy driver for supporting multiple emulated TPMsStefan Berger
This patch implements a proxy driver for supporting multiple emulated TPMs in a system. The driver implements a device /dev/vtpmx that is used to created a client device pair /dev/tpmX (e.g., /dev/tpm10) and a server side that is accessed using a file descriptor returned by an ioctl. The device /dev/tpmX is the usual TPM device created by the core TPM driver. Applications or kernel subsystems can send TPM commands to it and the corresponding server-side file descriptor receives these commands and delivers them to an emulated TPM. The driver retrievs the TPM 1.2 durations and timeouts. Since this requires the startup of the TPM, we send a startup for TPM 1.2 as well as TPM 2. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> CC: linux-kernel@vger.kernel.org CC: linux-doc@vger.kernel.org CC: linux-api@vger.kernel.org Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: Introduce TPM_CHIP_FLAG_VIRTUALStefan Berger
Introduce TPM_CHIP_FLAG_VIRTUAL to be used when the chip device has no parent device. Prevent sysfs entries requiring a parent device from being created. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: Remove all uses of drvdata from the TPM CoreJason Gunthorpe
The final thing preventing this was the way the sysfs files were attached to the pdev. Follow the approach developed for ppi and move the sysfs files to the chip->dev with symlinks from the pdev for compatibility. Everything in the core now sanely uses container_of to get the chip. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: Remove useless priv field in struct tpm_vendor_specificChristophe Ricard
Remove useless priv field in struct tpm_vendor_specific and take benefit of chip->dev.driver_data. As priv is the latest field available in struct tpm_vendor_specific, remove any reference to that structure. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: Move tpm_vendor_specific data related with PTP specification to tpm_chipChristophe Ricard
Move tpm_vendor_specific data related to TCG PTP specification to tpm_chip. Move all fields directly linked with well known TCG concepts and used in TPM drivers (tpm_i2c_atmel, tpm_i2c_infineon, tpm_i2c_nuvoton, tpm_tis and xen-tpmfront) as well as in TPM core files (tpm-sysfs, tpm-interface and tpm2-cmd) in tpm_chip. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: drop 'locality' from struct tpm_vendor_specificChristophe Ricard
Dropped the field 'locality' from struct tpm_vendor_specific migrated it to the private structures of st33zp24, tpm_i2c_infineon and tpm_tis. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: drop 'read_queue' from struct tpm_vendor_specificChristophe Ricard
Dropped the field 'read_queue' from struct tpm_vendor_specific and make it available to the various private structures in the drivers. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: drop 'irq' from struct tpm_vendor_specificChristophe Ricard
Dropped the field 'irq' from struct tpm_vendor_specific and make it available to the various private structures in the drivers using irqs. A dedicated flag TPM_CHIP_FLAG_IRQ is added for the upper layers. In st33zp24, struct st33zp24_dev declaration is moved to st33zp24.h in order to make accessible irq from other phy's(i2c, spi). In tpm_i2c_nuvoton, chip->vendor.priv is not directly allocated. We can access irq field from priv_data in a cleaner way. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: drop 'iobase' from struct tpm_vendor_specificChristophe Ricard
Dropped the field 'iobase' from struct tpm_vendor_specific and migrated it to the private structures of tpm_atmel and tpm_tis. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: drop list from struct tpm_vendor_specificChristophe Ricard
Dropped list from struct tpm_vendor_specific as it is not used in any place. It is initialized in tpm_i2c_infineon but not used at all in the code. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: drop the field 'time_expired' from struct tpm_chipJarkko Sakkinen
Removed the field because it is not used for anything. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2016-06-25tpm: drop 'base' from struct tpm_vendor_specificJarkko Sakkinen
Dropped the field 'base' from struct tpm_vendor_specific and migrated it to the private structures of tpm_atmel and tpm_nsc. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2016-06-25tpm: drop manufacturer_id from struct tpm_vendor_specificJarkko Sakkinen
Dropped manufacturer_id from struct tpm_vendor_specific and redeclared it in the private struct priv_data that tpm_tis uses because the field is only used tpm_tis. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2016-06-25tpm: drop tpm_atmel specific fields from tpm_vendor_specificJarkko Sakkinen
Introduced a private struct tpm_atmel_priv that contains the variables have_region and region_size that were previously located in struct tpm_vendor_specific. These fields were only used by tpm_atmel. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2016-06-25tpm: drop int_queue from tpm_vendor_specificJarkko Sakkinen
Drop field int_queue from tpm_vendor_specific as it is used only by tpm_tis. Probably all of the fields should be eventually dropped and moved to the private structures of different drivers but it is better to do this one step at a time in order not to break anything. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2016-06-25tpm: check for TPM_CHIP_FLAG_TPM2 before calling tpm2_shutdown()Jarkko Sakkinen
Fixes: 20e0152393b41 ("tpm: fix crash in tpm_tis deinitialization") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2016-06-25tpm_crb: fix mapping of the buffersJarkko Sakkinen
On my Lenovo x250 the following situation occurs: [18697.813871] tpm_crb MSFT0101:00: can't request region for resource [mem 0xacdff080-0xacdfffff] The mapping of the control area overlaps the mapping of the command buffer. The control area is mapped over page, which is not right. It should mapped over sizeof(struct crb_control_area). Fixing this issue unmasks another issue. Command and response buffers can overlap and they do interleave on this machine. According to the PTP specification the overlapping means that they are mapped to the same buffer. The commit has been also on a Haswell NUC where things worked before applying this fix so that the both code paths for response buffer initialization are tested. Cc: stable@vger.kernel.org Fixes: 1bd047be37d9 ("tpm_crb: Use devm_ioremap_resource") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2016-06-25tpm/st33zp24: Remove unneeded tpm_reg in get_burstcountChristophe Ricard
We can get rid of tpm_reg variable in get_burstcount. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm/st33zp24/spi: Drop two useless checks in ACPI probe pathChristophe Ricard
When st33zp24_spi_acpi_request_resources() gets called we already know that the entries in ->acpi_match_table have matched ACPI ID of the device. In addition spi_device pointer cannot be NULL in any case (otherwise I2C core would not call ->probe() for the driver in the first place). Drop the two useless checks from the driver. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm/st33zp24/i2c: Drop two useless checks in ACPI probe pathChristophe Ricard
When st33zp24_i2c_acpi_request_resources() gets called we already know that the entries in ->acpi_match_table have matched ACPI ID of the device. In addition I2C client pointer cannot be NULL in any case (otherwise I2C core would not call ->probe() for the driver in the first place). Drop the two useless checks from the driver. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm_crb: drop struct resource res from struct crb_privJarkko Sakkinen
The iomem resource is needed only temporarily so it is better to pass it on instead of storing it permanently. Named the variable as io_res so that the code better documents itself. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2016-06-25tpm: fix crash in tpm_tis deinitializationJarkko Sakkinen
rmmod crashes the driver because tpm_chip_unregister() already sets ops to NULL. This commit fixes the issue by moving tpm2_shutdown() to tpm_chip_unregister(). This commit is also cleanup because it removes duplicate code from tpm_crb and tpm_tis to the core. Fixes: 4d3eac5e156a ("tpm: Provide strong locking for device removal") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2016-06-25tpm: cleanup tpm_tis_remove()Jarkko Sakkinen
Created a local variable pointing to the INT_ENABLE_x register. The expression clearing INT_ENABLE_x.globalIntEnable is unreadable and hard to modify without surpassing the 80 char boundary. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Christophe Ricard <christophe-h.ricard@st.com>
2016-06-25tpm: fix tpm_bios_log_setup stub prototypeArnd Bergmann
A cleanup patch changed the prototype of the regular tpm_bios_log_setup function, but not that of the stub that is used when the TPM is disabled, causing a harmless build warning: drivers/char/tpm/tpm-chip.c: In function 'tpm1_chip_register': drivers/char/tpm/tpm-chip.c:287:38: error: passing argument 1 of 'tpm_bios_log_setup' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] chip->bios_dir = tpm_bios_log_setup(dev_name(&chip->dev)); In file included from ../drivers/char/tpm/tpm-chip.c:30:0: ../drivers/char/tpm/tpm_eventlog.h:83:31: note: expected 'char *' but argument is of type 'const char *' static inline struct dentry **tpm_bios_log_setup(char *name) This changes the stub function to match the normal prototype, avoiding that warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: aca8db8088c3 ("tpm: Get rid of devname") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-06-25tpm: Replace device number bitmap with IDRStefan Berger
Replace the device number bitmap with IDR. Extend the number of devices we can create to 64k. Since an IDR allows us to associate a pointer with an ID, we use this now to rewrite tpm_chip_find_get() to simply look up the chip pointer by the given device ID. Protect the IDR calls with a mutex. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>