summaryrefslogtreecommitdiff
path: root/drivers/clk/renesas
AgeCommit message (Collapse)Author
2022-06-13clk: renesas: r8a779f0: Add SDHI0 clockWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220603233437.21819-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-13clk: renesas: r8a779f0: Add thermal clockWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220525151130.24103-1-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-07clk: renesas: rzg2l: Fix reset status functionBiju Das
As per RZ/G2L HW(Rev.1.10) manual, reset monitor register value 0 means reset signal is not applied (deassert state) and 1 means reset signal is applied (assert state). reset_control_status() expects a positive value if the reset line is asserted. But rzg2l_cpg_status function returns zero for asserted state. This patch fixes the issue by adding double inverted logic, so that reset_control_status returns a positive value if the reset line is asserted. Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220531071657.104121-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a06g032: Fix UART clkgrp bitselRalph Siemsen
There are two UART clock groups, each having a mux to select its upstream clock source. The register/bit definitions for accessing these two muxes appear to have been reversed since introduction. Correct them so as to match the hardware manual. Fixes: 4c3d88526eba ("clk: renesas: Renesas R9A06G032 clock driver") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220518182527.1693156-1-ralph.siemsen@linaro.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a06g032: Drop some unused fieldsRalph Siemsen
Remove unused fields from struct r9a06g032_clkdesc. As the D_UGATE macro no longer uses _gi, drop it from all declarations. Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220518172808.1691450-2-ralph.siemsen@linaro.org Link: https://lore.kernel.org/r/20220518172808.1691450-3-ralph.siemsen@linaro.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a09g011: Add WDT clock and reset entriesPhil Edworthy
Add WDT0 clock and reset entries to CPG driver. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220518150105.48167-1-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a09g011: Add PFC clock and reset entriesPhil Edworthy
Add PFC clock/reset entries to CPG driver. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220518135208.39885-1-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a07g044: Add POEG clock and reset entriesBiju Das
Add POEG clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220510110653.7326-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-06-06clk: renesas: r9a07g044: Add GPT clock and reset entryBiju Das
Add GPT clock and reset entry to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220510110653.7326-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-29Merge tag 'dmaengine-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "Nothing special, this includes a couple of new device support and new driver support and bunch of driver updates. New support: - Tegra gpcdma driver support - Qualcomm SM8350, Sm8450 and SC7280 device support - Renesas RZN1 dma and platform support Updates: - stm32 device pause/resume support and updates - DMA memset ops Documentation and usage clarification - deprecate '#dma-channels' & '#dma-requests' bindings - driver updates for stm32, ptdma idsx etc" * tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits) dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled dmaengine: sun6i: Add support for the D1 variant dmaengine: sun6i: Add support for 34-bit physical addresses dmaengine: sun6i: Do not use virt_to_phys dt-bindings: dma: sun50i-a64: Add compatible for D1 dmaengine: tegra: Remove unused switch case dmaengine: tegra: Fix uninitialized variable usage dmaengine: stm32-dma: add device_pause/device_resume support dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done() dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor dmaengine: qcom: gpi: Add support for sc7280 dt-bindings: dma: pl330: Add power-domains dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler() dmaengine: stm32-mdma: remove GISR1 register dmaengine: ti: deprecate '#dma-channels' dmaengine: mmp: deprecate '#dma-channels' dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests' ...
2022-05-19clk: renesas: r9a06g032: Probe possible childrenMiquel Raynal
The clock controller device on r9a06g032 takes all the memory range that is described as being a system controller. This range contains many different (unrelated?) registers besides the ones belonging to the clock controller, that can necessitate to be accessed from other peripherals. For instance, the dmamux registers are there. The dmamux "device" will be described as a child node of the clock/system controller node, which means we need the top device driver (the clock controller driver in this case) to populate its children manually. In case of error when populating the children, we do not fail the probe on purpose to keep the clk driver up and running. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220427095653.91804-7-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19clk: renesas: r9a06g032: Export function to set dmamuxMiquel Raynal
The dmamux register is located within the system controller. Without syscon, we need an extra helper in order to give write access to this register to a dmamux driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220427095653.91804-5-miquel.raynal@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-06clk: renesas: r9a09g011: Add eth clock and reset entriesPhil Edworthy
Add ethernet clock/reset entries to CPG driver. Note that the AXI and CHI clocks are both enabled and disabled using the same register bit. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220504145454.71287-2-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-06clk: renesas: Add RZ/V2M support using the rzg2l driverPhil Edworthy
The Renesas RZ/V2M SoC is very similar to RZ/G2L, though it doesn't have any CLK_MON registers. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-11-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add support for RZ/V2M reset monitor regPhil Edworthy
The RZ/V2M doesn't have a matching set of reset monitor regs for each reset reg like the RZ/G2L. Instead, it has a single CPG_RST_MON reg which has a single bit per module. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-10-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Make use of CLK_MON registers optionalPhil Edworthy
The RZ/V2M SoC doesn't use CLK_MON registers, so make them optional. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-9-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Set HIWORD mask for all mux and dividersPhil Edworthy
All of the muxes and dividers that can be modified require the HIWORD flags, so make the macros set them. It won't affect read only muxes and dividers. This will make the clock tables a little easier to read, particularly for new SoCs coming. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-8-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add read only versions of the clk macrosPhil Edworthy
This just makes the clk tables easier to read. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-7-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Move the DEF_MUX array size calc into the macroPhil Edworthy
We only ever use ARRAY_SIZE() to populate the number of parents, so move this into the macro to always detect it automatically. This also makes the tables of clocks a little simpler. Similarly for the DEF_SD_MUX macro. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-6-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Fix OSTM1 module clock nameGeert Uytterhoeven
Fix a typo in the name of the "ostm1_pclk" clock. This change has no run-time impact. Fixes: 161450134ae9bab3 ("clk: renesas: r9a07g044: Add OSTM clock and reset entries") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/e0eff1f57378ec29d0d3f1a7bdd7e380583f736b.1651494871.git.geert+renesas@glider.be
2022-05-05clk: renesas: r9a07g043: Add clock and reset entries for ADCBiju Das
Add clock and reset entries for ADC block in CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g043: Add TSU clock and reset entryBiju Das
Add TSU clock and reset entry to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g043: Add RSPI clock and reset entriesBiju Das
Add RSPI{0,1,2} clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g043: Add clock and reset entries for SPI Multi I/O Bus ↵Biju Das
Controller Add clock and reset entries for SPI Multi I/O Bus Controller. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add DSI clock and reset entriesBiju Das
Add DSI clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-10-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add LCDC clock and reset entriesBiju Das
Add LCDC clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-9-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add M4 Clock supportBiju Das
Add support for M4 clock which is sourced from pll2_533_div2. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-8-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add M3 Clock supportBiju Das
Add support for M3 clock which is sourced from DSI divider connected to PLL5_4 mux. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-7-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add {M2, M2_DIV2} Clocks supportBiju Das
Add support for {M2, M2_DIV2} clocks which is sourced from pll3_533. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-6-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add M1 clock supportBiju Das
Add support for M1 clock which is sourced from FOUTPOSTDIV. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add DSI divider clk supportBiju Das
M3 clock is sourced from DSI Divider (DSIDIVA * DSIDIVB) This patch add support for DSI divider clk by combining DSIDIVA and DSIDIVB. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add PLL5_4 clk mux supportBiju Das
Add PLL5_4 clk mux support to select clock from clock sources FOUTPOSTDIV and FOUT1PH0. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add FOUTPOSTDIV clk supportBiju Das
PLL5 generates FOUTPOSTDIV clk and is sourced by LCDC/DSI modules. The FOUTPOSTDIV is connected to PLL5_4 MUX. Video clock is sourced from DSI divider which is connected to PLL5_4 MUX. This patch adds support for generating FOUTPOSTDIV clk. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-29clk: renesas: cpg-mssr: Add support for R-Car V4HYoshihiro Shimoda
Initial CPG support for R-Car V4H (r8a779g0). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220428135058.597586-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-29clk: renesas: rcar-gen4: Add CLK_TYPE_GEN4_PLL4Yoshihiro Shimoda
R-Car V4H (r8a779g0) has PLL4 so that add CLK_TYPE_GEN4_PLL4. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220425064201.459633-5-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add WDT clock and reset entriesBiju Das
Add WDT{0,2} clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-7-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add OSTM clock and reset entriesBiju Das
Add OSTM{0,1,2} clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-6-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add clock and reset entries for CANFDBiju Das
Add clock and reset entries for CANFD in CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add USB clocks/resetsBiju Das
Add clock/reset entries for USB PHY control, USB2.0 host and device. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add SSIF-2 clock and reset entriesBiju Das
Add SSIF-2{0,1,2,3} clock and reset entries in CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a07g043: Add I2C clocks/resetsBiju Das
Add I2C{0,1,2,3} clock and reset entries. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220425095244.156720-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-28clk: renesas: r9a06g032: Fix the RTC hclock descriptionMiquel Raynal
It needs to be un-gated, but also a reset must be released and an idle flag should also be disabled. The driver already supports all these operations, so update the description of the RTC hclock to fit these requirements. Fixes: 4c3d88526eba2143 ("clk: renesas: Renesas R9A06G032 clock driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220421090016.79517-3-miquel.raynal@bootlin.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-25clk: renesas: r8a779f0: Add UFS clockYoshihiro Shimoda
Add the module clock used by the UFS host controller on the Renesas R-Car S4-8 (R8A779F0) SoC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220411124932.3765571-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: r9a07g043: Add SDHI clock and reset entriesBiju Das
Add SDHI{0,1} mux, clock and reset entries to CPG driver Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220402074626.25624-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: r9a07g043: Add GbEthernet clock/resetBiju Das
Add ETH{0,1} clock/reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220402074626.25624-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: r9a07g043: Add ethernet clock sourcesBiju Das
Ethernet reference clock can be sourced from PLL5_500 or PLL6. Add support for ethernet source clock selection using SEL_PLL_6_2 mux. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220402074626.25624-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: r9a07g043: Add GPIO clock and reset entriesBiju Das
Add GPIO clock and reset entries in CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220402074626.25624-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: Add support for RZ/G2UL SoCBiju Das
The clock structure for RZ/G2UL is almost identical to RZ/G2L SoC with fewer IP blocks. The IP blocks such as WDT1, GPT, H264, GPU and POEG are not present on RZ/G2UL. This patch adds minimal clock and reset entries required to boot the system on Renesas RZ/G2UL SMARC EVK and binds it with the RZ/G2L CPG core driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220412161314.13800-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13clk: renesas: Move RPC core clocksGeert Uytterhoeven
The RPC and RPCD2 core clocks were added to the sections for internal core clocks, while they are core clock outputs, visible from DT. Move them to the correct sections. Rename the ".rpc" clock on R-Car S4 to "rpc". Fixup nearby whitespace to increase uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/a938b938f00939b9206d7fbaba78e2ef09915f5f.1649681891.git.geert+renesas@glider.be
2022-04-13clk: renesas: rzg2l: Simplify multiplication/shift logicGeert Uytterhoeven
"a * (1 << b)" == "a << b". No change in generated code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/71e1cf2e30fb2d7966fc8ec6bab23eb7e24aa1c4.1645460687.git.geert+renesas@glider.be
generated by cgit (git 2.34.1) at 2025-09-12 03:52:52 +0000