Age | Commit message (Collapse) | Author |
|
clk_bulk_get_all() allocates an array of struct clk_bulk data for us
(unlike clk_bulk_get()), so we need to free it. Let's use the
clk_bulk_put_all() helper.
kmemleak complains, on an RK3399 Gru/Kevin system:
unreferenced object 0xffffff80045def00 (size 128):
comm "swapper/0", pid 1, jiffies 4294667682 (age 86.394s)
hex dump (first 32 bytes):
44 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00 D2`.............
48 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00 H2`.............
backtrace:
[<00000000742860d6>] __kmalloc+0x22c/0x39c
[<00000000b0493f2c>] clk_bulk_get_all+0x64/0x188
[<00000000325f5900>] devm_clk_bulk_get_all+0x58/0xa8
[<00000000175b9bc5>] dwc3_probe+0x8ac/0xb5c
[<000000009169e2f9>] platform_drv_probe+0x9c/0xbc
[<000000005c51e2ee>] really_probe+0x13c/0x378
[<00000000c47b1f24>] driver_probe_device+0x84/0xc0
[<00000000f870fcfb>] __device_attach_driver+0x94/0xb0
[<000000004d1b92ae>] bus_for_each_drv+0x8c/0xd8
[<00000000481d60c3>] __device_attach+0xc4/0x150
[<00000000a163bd36>] device_initial_probe+0x1c/0x28
[<00000000accb6bad>] bus_probe_device+0x3c/0x9c
[<000000001a199f89>] device_add+0x218/0x3cc
[<000000001bd84952>] of_device_add+0x40/0x50
[<000000009c658c29>] of_platform_device_create_pdata+0xac/0x100
[<0000000021c69ba4>] of_platform_bus_create+0x190/0x224
Fixes: f08c2e2865f6 ("clk: add managed version of clk_bulk_get_all")
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20210731025950.2238582-1-briannorris@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Currently, no driver support for DDR memory controller (DMC) is present,
as a result, no driver is explicitly consuming the ddrphy clock. This means
that VPLL1 (parent of ddr clock) will be shutdown if we enable
and then disable any child clock of VPLL1 (e.g. SCLK_I2S0_8CH_TX).
If VPLL1 is disabled, the whole system will freeze, because the DDR
controller will lose its clock. So, it's necessary to prevent VPLL1 from
shutting down, by marking the ddrphy4x CLK_IS_CRITICAL.
This bug was discovered when I was porting rockchip_i2s_tdm driver to
mainline kernel from Rockchip 4.4 kernel. I guess that other Rockchip
SoCs without DMC driver may need the same patch. If this applies to
other devices, please let us know.
Signed-off-by: Yunhao Tian <t123yh@outlook.com>
Link: https://lore.kernel.org/r/BYAPR20MB24886765F888A9705CBEB70789E39@BYAPR20MB2488.namprd20.prod.outlook.com
[adapted subject, changed to add the clock to the critical list]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The rk3036/rk3328 pll types were converted to checking the lock status
via the internal register in january 2020, so don't need the grf
reference since then.
But it was forgotten to remove grf check when deciding between the
pll rate ops (read-only vs. read-write), so a clock driver without
the needed grf reference might've been put into the read-only mode
just because the grf reference was missing.
This affected the rk356x that needs to reclock certain plls at boot.
Fix this by removing the check for the grf for selecting the utilized
operations.
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 7f6ffbb885d1 ("clk: rockchip: convert rk3036 pll type to use internal lock status")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
[adjusted the commit message, adjusted the fixes tag]
Link: https://lore.kernel.org/r/20210728180034.717953-3-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Implement disable_unused() callback of tegra_clk_sdmmc_mux_ops to fix
imbalanced disabling of the unused MMC clock on Tegra210 Jetson Nano.
Fixes: c592c8a28f58 ("clk: tegra: Fix refcounting of gate clocks")
Reported-by: Jon Hunter <jonathanh@nvidia.com> # T210 Nano
Tested-by: Jon Hunter <jonathanh@nvidia.com> # T210 Nano
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210717112742.7196-1-digetx@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The LPT stands for Lynxpoint PCH. However the driver is used on a few
Intel Atom SoCs. Rename it to reflect this in a way how another clock
driver, i.e. clk-pmc-atom, is called.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210722193450.35321-1-andriy.shevchenko@linux.intel.com
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
When the body of a case statement is empty, it is well understood that
it is intentional and explicit fallthrough statements are not required.
Drop them.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20210708211645.3621902-1-liambeguin@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
I found that COMMON_CLK_MT8167* do not depend on COMMON_CLK_MT8167,
so it is possible to config:
CONFIG_COMMON_CLK_MT8167=n
CONFIG_COMMON_CLK_MT8167_*=y
Although it does not cause build breaks with such configuration,
I think it is clearer to make COMMON_CLK_MT8167* depend on
COMMON_CLK_MT8167.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210716051732.3422-1-miles.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The clock controller has two additional clock source pairs, in order to
support more than a single DisplayPort PHY. List these, so it's possible
to describe them all.
Also drop the unnecessary freq_tbl for the link clock sources, to allow
these parents to be used.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721224610.3035258-1-bjorn.andersson@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Commit a0384ecfe2aa ("clk: qcom: smd-rpm: De-duplicate identical
entries") introduces the following regression on MSM8936/MSM8939, as
RPM_SMD_PCNOC_A_CLK gets pointed to pcnoc_clk by mistake. Fix it by
correcting the clock to pcnoc_a_clk.
[ 1.307363] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 1.313593] Mem abort info:
[ 1.322512] ESR = 0x96000004
[ 1.325132] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.338872] SET = 0, FnV = 0
[ 1.355483] EA = 0, S1PTW = 0
[ 1.368702] FSC = 0x04: level 0 translation fault
[ 1.383294] Data abort info:
[ 1.398292] ISV = 0, ISS = 0x00000004
[ 1.398297] CM = 0, WnR = 0
[ 1.398301] [0000000000000000] user address but active_mm is swapper
[ 1.404193] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 1.420596] Modules linked in:
[ 1.420604] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.14.0-rc3+ #198
[ 1.441010] pc : __clk_register+0x48/0x780
[ 1.446045] lr : __clk_register+0x3c/0x780
[ 1.449953] sp : ffff800010063440
[ 1.454031] x29: ffff800010063440 x28: 0000000000000004 x27: 0000000000000066
[ 1.457423] x26: 0000000000000001 x25: 000000007fffffff x24: ffff800010f9f388
[ 1.464540] x23: ffff00007fc12a90 x22: ffff0000034b2010 x21: 0000000000000000
[ 1.471658] x20: ffff800010f9fff8 x19: ffff00000152a700 x18: 0000000000000001
[ 1.478778] x17: ffff00007fbd40c8 x16: 0000000000000460 x15: 0000000000000465
[ 1.485895] x14: ffffffffffffffff x13: 746e756f635f7265 x12: 696669746f6e5f6b
[ 1.493013] x11: 0000000000000006 x10: 0000000000000000 x9 : 0000000000000000
[ 1.500131] x8 : ffff00000152a800 x7 : 0000000000000000 x6 : 000000000000003f
[ 1.507249] x5 : 0000000000000040 x4 : 0000000000000000 x3 : 0000000000000004
[ 1.514367] x2 : 0000000000000000 x1 : 0000000000000cc0 x0 : ffff00000152a700
[ 1.521486] Call trace:
[ 1.528598] __clk_register+0x48/0x780
[ 1.530855] clk_hw_register+0x20/0x60
[ 1.534674] devm_clk_hw_register+0x50/0xa8
[ 1.538408] rpm_smd_clk_probe+0x1a4/0x260
[ 1.542488] platform_probe+0x68/0xd8
[ 1.546653] really_probe+0x140/0x2f8
[ 1.550386] __driver_probe_device+0x78/0xe0
[ 1.554033] driver_probe_device+0x80/0x110
[ 1.558373] __device_attach_driver+0x90/0xe0
[ 1.562280] bus_for_each_drv+0x78/0xc8
[ 1.566793] __device_attach+0xf0/0x150
[ 1.570438] device_initial_probe+0x14/0x20
[ 1.574259] bus_probe_device+0x9c/0xa8
[ 1.578425] device_add+0x378/0x870
[ 1.582243] of_device_add+0x44/0x60
[ 1.585716] of_platform_device_create_pdata+0xc0/0x110
[ 1.589538] of_platform_bus_create+0x17c/0x388
[ 1.594485] of_platform_populate+0x50/0xf0
[ 1.598998] qcom_smd_rpm_probe+0xd4/0x128
[ 1.603164] rpmsg_dev_probe+0xbc/0x1a8
[ 1.607330] really_probe+0x140/0x2f8
[ 1.611063] __driver_probe_device+0x78/0xe0
[ 1.614883] driver_probe_device+0x80/0x110
[ 1.619224] __device_attach_driver+0x90/0xe0
[ 1.623131] bus_for_each_drv+0x78/0xc8
[ 1.627643] __device_attach+0xf0/0x150
[ 1.631289] device_initial_probe+0x14/0x20
[ 1.635109] bus_probe_device+0x9c/0xa8
[ 1.639275] device_add+0x378/0x870
[ 1.643095] device_register+0x20/0x30
[ 1.646567] rpmsg_register_device+0x54/0x90
[ 1.650387] qcom_channel_state_worker+0x168/0x288
[ 1.654814] process_one_work+0x1a0/0x328
[ 1.659415] worker_thread+0x4c/0x420
[ 1.663494] kthread+0x150/0x160
[ 1.667138] ret_from_fork+0x10/0x18
[ 1.670442] Code: 97f56b92 b40034a0 aa0003f3 52819801 (f94002a0)
[ 1.674004] ---[ end trace 412fa6f47384cdfe ]---
Fixes: a0384ecfe2aa ("clk: qcom: smd-rpm: De-duplicate identical entries")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210727092613.23056-1-shawn.guo@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 vencsys clock provider
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-22-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 vdecsys and vdecsys soc clock providers
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-21-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 scp adsp clock provider
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-20-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 msdc and msdc top clock providers
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-19-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 mmsys clock provider
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20210726105719.15793-18-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 mfgcfg clock provider
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-17-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 mdpsys clock provider
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-16-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 ipesys clock provider
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-15-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 imp i2c wrapper clock provider
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-14-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 imgsys and imgsys2 clock providers
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-13-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 camsys and camsys raw clock providers
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-12-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 audio clock provider
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-11-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add MT8192 basic clock providers, include topckgen, apmixedsys,
infracfg and pericfg.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-10-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Most of subsystem clock providers only need to register clock gates
in their probe() function.
To reduce the duplicated code by add a generic function.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-9-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
In all MediaTek PLL design, bit0 of CON0 register is always
the enable bit.
However, there's a special case of usbpll on MT8192.
The enable bit of usbpll is moved to bit2 of other register.
Add configurable en_reg and pll_en_bit for enable control or
default 0 where pll data are static variables.
Hence, CON0_BASE_EN could also be removed.
And there might have another special case on other chips,
the enable bit is still on CON0 register but not at bit0.
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-8-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
In fact, the en_mask is a combination of divider enable mask
and pll enable bit(bit0).
Before this patch, we enabled both divider mask and bit0 in prepare(),
but only cleared the bit0 in unprepare().
In the future, we hope en_mask will only be used as divider enable mask.
The enable register(CON0) will be set in 2 steps:
first is divider mask, and then bit0 during prepare(), and vice versa.
But considering backward compatibility, at this stage we allow en_mask
to be a combination or a pure divider enable mask.
And then we will make en_mask a pure divider enable mask in another
following patch series.
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-7-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Not all clock providers need to be marked compatible with "syscon"
for system configuration usage, so use device_node_to_regmap() to
skip "syscon" check.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-6-chun-jie.chen@mediatek.com
Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add the bypass register for the s2f_user0_clk.
Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-3-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Correct the s2f_user0_mux clock representation.
Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The psi_ref_clk comes from the C2 node of the main_pll and periph_pll,
not the C3.
Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The clk-hi3559a driver uses functions from reset.c so it should
select RESET_HISI to avoid build errors.
Fixes these build errors:
aarch64-linux-ld: drivers/clk/hisilicon/clk-hi3559a.o: in function `hi3559av100_crg_remove':
clk-hi3559a.c:(.text+0x158): undefined reference to `hisi_reset_exit'
aarch64-linux-ld: drivers/clk/hisilicon/clk-hi3559a.o: in function `hi3559av100_crg_probe':
clk-hi3559a.c:(.text+0x1f4): undefined reference to `hisi_reset_init'
aarch64-linux-ld: clk-hi3559a.c:(.text+0x238): undefined reference to `hisi_reset_exit'
Fixes: 6c81966107dc ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: stable@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Link: https://lore.kernel.org/r/20210717043159.12566-1-rdunlap@infradead.org
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Enabling the framebuffer leads to a system hang. Running, as a debug
hack, the store_pan() function in drivers/video/fbdev/core/fbsysfs.c
without taking the console_lock, allows to see the crash backtrace on
the serial line.
~ # echo 0 0 > /sys/class/graphics/fb0/pan
[ 9.719414] Unhandled exception: IPSR = 00000005 LR = fffffff1
[ 9.726937] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
[ 9.733008] Hardware name: STM32 (Device Tree Support)
[ 9.738296] PC is at clk_gate_is_enabled+0x0/0x28
[ 9.743426] LR is at stm32f4_pll_div_set_rate+0xf/0x38
[ 9.748857] pc : [<0011e4be>] lr : [<0011f9e3>] psr: 0100000b
[ 9.755373] sp : 00bc7be0 ip : 00000000 fp : 001f3ac4
[ 9.760812] r10: 002610d0 r9 : 01efe920 r8 : 00540560
[ 9.766269] r7 : 02e7ddb0 r6 : 0173eed8 r5 : 00000000 r4 : 004027c0
[ 9.773081] r3 : 0011e4bf r2 : 02e7ddb0 r1 : 0173eed8 r0 : 1d3267b8
[ 9.779911] xPSR: 0100000b
[ 9.782719] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9
[ 9.788791] Hardware name: STM32 (Device Tree Support)
[ 9.794120] [<0000afa1>] (unwind_backtrace) from [<0000a33f>] (show_stack+0xb/0xc)
[ 9.802421] [<0000a33f>] (show_stack) from [<0000a8df>] (__invalid_entry+0x4b/0x4c)
The `pll_num' field in the post_div_data configuration contained a wrong
value which also referenced an uninitialized hardware clock when
clk_register_pll_div() was called.
Fixes: 517633ef630e ("clk: stm32f4: Add post divisor for I2S & SAI PLLs")
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Link: https://lore.kernel.org/r/20210725160725.10788-1-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add entry for fixed core clock P0_DIV2 and assign LAST_DT_CORE_CLK
to R9A07G044_CLK_P0_DIV2.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210719143811.2135-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for the video clock controller found on SC7280
based devices. This would allow video drivers to probe and
control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-8-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for the graphics clock controller found on SC7280
based devices. This would allow graphics drivers to probe and
control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-6-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for the display clock controller found on SC7280
based devices. This would allow display drivers to probe and
control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1626189143-12957-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add clock and reset entries for ADC block in CPG driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210719085840.21842-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add clock and reset entries for CANFD in CPG driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210715182123.23372-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Rename renesas-rzg2l-cpg.c and renesas-rzg2l-cpg.h to rzg2l-cpg.c resp.
rzg2l-cpg.h, for consistency with other (sub)drivers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/edc442daaedffcf10e835ff479d906fcae0e59db.1626268821.git.geert+renesas@glider.be
|
|
Add GPIO clock and reset entries in CPG driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210712194422.12405-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add SSIF-2 clock and reset entries in CPG driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210702135010.5937-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add clock/reset entries for USB PHY control, USB2.0 host and device.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210630073013.22415-5-biju.das.jz@bp.renesas.com
[geert: s/usb0_device/usb0_func]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add DMAC clock and reset entries in CPG driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-10-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add I2C{0,1,2,3} clock and reset entries.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-9-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The DSI clock is incorrectly defined as a fixed clock. This
demonstrates itself as the dsi-encoders failing to correctly enable and
start their PPI and HS clocks internally, and causes failures.
Move the DSI parent clock to match the updates in the BSP, which
resolves the initialisation procedures.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Fixes: 17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Link: https://lore.kernel.org/r/20210622232711.3219697-3-kieran.bingham@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The DU clock is added to the S3D1 clock parent. The Renesas BSP lists
S2D1 as the clock parent, however there is no S2 clock on this platform.
S3D1 is chosen as a best effort guess and demonstrates functionality but
is not guaranteed to be correct.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20210622232711.3219697-2-kieran.bingham@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
As RZ/G2 SoCs do not support DVFS, the "iic-dvfs" module was renamed to
"iic-pmic" in the RZ/G Series, 2nd Generation User’s Manual: Hardware
Rev. 1.00.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/3e549b41989ff2797b998a1c749c9f607845f44a.1624016693.git.geert+renesas@glider.be
|
|
Fix clock index out of range check for module clocks in
rzg2l_cpg_clk_src_twocell_get().
Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210617155432.18827-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
These functions accidentally return both error pointers and NULL when
there is an error. It doesn't cause a problem but it is confusing and
seems unintentional.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/YMtY7nOtqEvTokh7@mwanda
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The "pll_clk" and "clock" pointers are allocated with devm_kzalloc() so
freeing them with kfree() will lead to a double free. This would only
happen if probe failed, and the system is not bootable.
Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/YMtYs7LVveYH4eRe@mwanda
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Currently the function returns NULL on error, so exact error code is
lost. This patch changes return convention of the function to use
ERR_PTR() on error instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623896524-102058-1-git-send-email-yang.lee@linux.alibaba.com
[geert: Drop curly braces]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|