summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2020-12-19clk: at91: sama7g5: decrease lower limit for MCK0 rateClaudiu Beznea
On SAMA7G5 CPU clock is changed at run-time by DVFS. Since MCK0 and CPU clock shares the same parent clock (CPUPLL clock) the MCK0 is also changed by DVFS to avoid over/under clocking of MCK0 consumers. The lower limit is changed to be able to set MCK0 accordingly by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-9-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: remove mck0 from parent list of other clocksClaudiu Beznea
MCK0 is changed at runtime by DVFS. Due to this, since not all IPs are glitch free aware at MCK0 changes, remove MCK0 from parent list of other clocks (e.g. generic clock, programmable/system clock, MCKX). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-8-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-sam9x60-pll: allow runtime changes for pllClaudiu Beznea
Allow runtime frequency changes for PLLs registered with proper flags. This is necessary for CPU PLL on SAMA7G5 which is used by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristicsEugen Hristev
This SoC has the 5th divisor for the mck0 master clock. Adapt the characteristics accordingly. Reported-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-master: add 5th divisor for mck masterEugen Hristev
clk-master can have 5 divisors with a field width of 3 bits on some products. Change the mask and number of divisors accordingly. Reported-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-5-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DTEugen Hristev
Allow SYSPLL and CPUPLL to be referenced as a PMC_TYPE_CORE clock from phandle in DT. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea@microchip.com: adapt commit message, add CPU PLL] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19dt-bindings: clock: at91: add sama7g5 pll definesEugen Hristev
Add SAMA7G5 specific PLL defines to be referenced in a phandle as a PMC_TYPE_CORE clock. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea@microchip.com: adapt comit message, adapt sama7g5.c] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: fix compilation errorClaudiu Beznea
pmc_data_allocate() has been changed. pmc_data_free() was removed. Adapt the code taking this into consideration. With this the programmable clocks were also saved in sama7g5_pmc so that they could be later referenced. Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: Add MODULE_DEVICE_TABLE()Nicolas Saenz Julienne
Add MODULE_DEVICE_TABLE() so as to be able to use the driver as a module. More precisely, for the driver to be loaded automatically at boot. Fixes: 1bc95972715a ("clk: bcm: Add BCM2711 DVP driver") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20201202103518.21889-1-nsaenzjulienne@suse.de Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: drop a variable that is assigned to onlyUwe Kleine-König
The third parameter to devm_platform_get_and_ioremap_resource() is used only to provide the used resource. As this variable isn't used afterwards, switch to the function devm_platform_ioremap_resource() which doesn't provide this output parameter. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201120132121.2678997-1-u.kleine-koenig@pengutronix.de Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: Trace clk_set_rate() "range" functionsMaxime Ripard
The clk_set_rate "range" functions don't have any tracepoints even though it might be useful. Add some. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201207105050.2096917-1-maxime@cerno.tech [sboyd@kernel.org: Reword commit text] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: axi-clkgen: move the OF table at the bottom of the fileAlexandru Ardelean
The change is mostly cosmetic. No functional changes. Since the driver now uses of_device_get_match_data() to obtain some driver specific info, there is no need to define the OF table before the probe function. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201203074037.26940-2-alexandru.ardelean@analog.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: axi-clkgen: wrap limits in a struct and keep copy on the state objectAlexandru Ardelean
Up until the these limits were global/hard-coded, since they are typically limits of the fabric. However, since this is an FPGA generated clock, this may run on setups where one clock is on a fabric, and another one synthesized on another fabric connected via PCIe (or some other inter-connect, and then these limits need to be adjusted for each instance of the AXI CLKGEN. This change wraps the current constants in 'axi_clkgen_limits' struct and the 'axi_clkgen' instance keeps a copy of these limits, which is initialized at probe from the default limits. The limits are stored on the device-tree OF table, so that we can adjust them via the compatible string. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201203074037.26940-1-alexandru.ardelean@analog.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: ti: omap5: Fix reboot DPLL lock failure when using ABE TIMERsDavid Shah
Having the ABE DPLL ref and bypass muxes set to different inputs was causing the DPLL not to lock when TIMER8 was used, as it is in the Pyra for the backlight. This patch fixes this by setting abe_dpll_bypass_clk_mux to sys_32k_ck in omap5xxx_dt_clk_init. A similar patch may also be needed for OMAP44xx which has similar code in omap4xxx_dt_clk_init, but I have not added this as I have no hardware to test on. Signed-off-by: David Shah <dave@ds0.me> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/1d3abe2512054866cc2ea7b2592238f4fa06502a.1607253531.git.hns@goldelico.com Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: ti: Fix memleak in ti_fapll_synth_setupZhang Qilong
If clk_register fails, we should goto free branch before function returns to prevent memleak. Fixes: 163152cbbe321 ("clk: ti: Add support for FAPLL on dm816x") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201113131623.2098222-1-zhangqilong3@huawei.com Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: Add hardware-enable column to clk summaryDmitry Osipenko
Add "hardware enable" column to the clk summary in order to show actual hardware enable-state of all clocks. The possible states are "Y/N/?", where question mark means that state is unknown, i.e. clock isn't a mux and clk-driver doesn't support is_enabled() callback for this clock. In conjunction with clk_ignore_unused, this tells us what unused clocks are left enabled after bootloader. This is also a useful aid for debugging interactions with firmware which changes clock states without notifying kernel. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201115203432.13934-1-digetx@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: mediatek: Make mtk_clk_register_mux() a static functionWeiyi Lu
mtk_clk_register_mux() should be a static function Fixes: a3ae549917f16 ("clk: mediatek: Add new clkmux register API") Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Link: https://lore.kernel.org/r/1605256192-31307-1-git-send-email-weiyi.lu@mediatek.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-16Merge tag 'arm-soc-omap-genpd-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC OMAP GenPD updates from Arnd Bergmann: "These are additional updates for the power domain support on OMAP, moving to an implementation based on device tree information instead of SoC specific code. This is the latest step in the ongoing process for moving code out of arch/arm/mach-omap2. I kept this separate from the other driver changes since it touches code in multiple areas" * tag 'arm-soc-omap-genpd-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits) ARM: OMAP2+: Fix am4 only build after genpd changes ARM: dts: Configure power domain for omap5 dss ARM: dts: omap5: add remaining PRM instances soc: ti: omap-prm: omap5: add genpd support for remaining PRM instances ARM: OMAP2+: Drop legacy platform data for dra7 gpmc ARM: dts: Configure interconnect target module for dra7 iva ARM: dts: dra7: add remaining PRM instances soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks ARM: OMAP2+: Drop legacy platform data for omap4 gpmc ARM: OMAP2+: Drop legacy platform data for omap4 iva ARM: dts: Configure power domain for omap4 dsp ARM: dts: Configure power domain for omap4 dss ARM: dts: omap4: add remaining PRM instances soc: ti: omap-prm: omap4: add genpd support for remaining PRM instances clk: ti: omap4: Drop idlest polling from IVA clkctrl clocks ARM: OMAP2+: Drop legacy remaining legacy platform data for am4 ARM: dts: Use simple-pm-bus for genpd for am4 l3 ARM: dts: Move am4 l3 noc to a separate node ARM: dts: Use simple-pm-bus for genpd for am4 l4_per ...
2020-12-16Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-12-16clk: sifive: Add clock enable and disable opsPragnesh Patel
Add new functions "sifive_prci_clock_enable(), sifive_prci_clock_disable() and sifive_clk_is_enabled()" to enable or disable the PRCI clock Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Zong Li <zong.li@sifive.com> Link: https://lore.kernel.org/r/20201209094916.17383-6-zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-16clk: sifive: Fix the wrong bit field shiftZong Li
The clk enable bit should be 31 instead of 24. Signed-off-by: Zong Li <zong.li@sifive.com> Reported-by: Pragnesh Patel <pragnesh.patel@sifive.com> Link: https://lore.kernel.org/r/20201209094916.17383-5-zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-16clk: sifive: Add a driver for the SiFive FU740 PRCI IP blockZong Li
Add driver code for the SiFive FU740 PRCI IP block. This IP block handles reset and clock control for the SiFive FU740 device and implements SoC-level clock tree controls and dividers. The link of unmatched as follow, and the U740-C000 manual would be present in the same page as soon. https://www.sifive.com/boards/hifive-unmatched This driver contains bug fixes and contributions from Henry Styles <hes@sifive.com> Erik Danie <erik.danie@sifive.com> Pragnesh Patel <pragnesh.patel@sifive.com> Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Henry Styles <hes@sifive.com> Cc: Erik Danie <erik.danie@sifive.com> Cc: Pragnesh Patel <pragnesh.patel@sifive.com> Link: https://lore.kernel.org/r/20201209094916.17383-4-zong.li@sifive.com [sboyd@kernel.org: Include header to silence sparse] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-16clk: sifive: Use common name for prci configurationZong Li
Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This patch is prepared for fu740 support. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> Link: https://lore.kernel.org/r/20201209094916.17383-3-zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-16clk: sifive: Extract prci core to common baseZong Li
Extract common core of prci driver to an independent file, it could allow other chips to reuse it. Separate SoCs-dependent code 'fu540' from prci core, then we can easily add 'fu740' later. Almost these changes are code movement. The different is adding the private data for each SoC use, so it needs to get match data in probe callback function, then use the data for initialization. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Link: https://lore.kernel.org/r/20201209094916.17383-2-zong.li@sifive.com [sboyd@kernel.org: Include header to silence sparse] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-15Merge tag 'pm-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update cpufreq (core and drivers), cpuidle (polling state implementation and the PSCI driver), the OPP (operating performance points) framework, devfreq (core and drivers), the power capping RAPL (Running Average Power Limit) driver, the Energy Model support, the generic power domains (genpd) framework, the ACPI device power management, the core system-wide suspend code and power management utilities. Specifics: - Use local_clock() instead of jiffies in the cpufreq statistics to improve accuracy (Viresh Kumar). - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq drivers (Viresh Kumar). - Clean up the cpufreq core, the intel_pstate driver and the schedutil cpufreq governor (Rafael Wysocki). - Fix up error code paths in the sti-cpufreq and mediatek cpufreq drivers (Yangtao Li, Qinglang Miao). - Fix cpufreq_online() to return error codes instead of success (0) in all cases when it fails (Wang ShaoBo). - Add mt8167 support to the mediatek cpufreq driver and blacklist mt8516 in the cpufreq-dt-platdev driver (Fabien Parent). - Modify the tegra194 cpufreq driver to always return values from the frequency table as the current frequency and clean up that driver (Sumit Gupta, Jon Hunter). - Modify the arm_scmi cpufreq driver to allow it to discover the power scale present in the performance protocol and provide this information to the Energy Model (Lukasz Luba). - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali Rohár). - Clean up the CPPC cpufreq driver (Ionela Voinescu). - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd Bergmann). - Rework the poling interval selection for the polling state in cpuidle (Mel Gorman). - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver (Ulf Hansson). - Modify the OPP framework to support empty (node-less) OPP tables in DT for passing dependency information (Nicola Mazzucato). - Fix potential lockdep issue in the OPP core and clean up the OPP core (Viresh Kumar). - Modify dev_pm_opp_put_regulators() to accept a NULL argument and update its users accordingly (Viresh Kumar). - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke). - Add support for governor feature flags to devfreq, make devfreq sysfs file permissions depend on the governor and clean up the devfreq core (Chanwoo Choi). - Clean up the tegra20 devfreq driver and deprecate it to allow another driver based on EMC_STAT to be used instead of it (Dmitry Osipenko). - Add interconnect support to the tegra30 devfreq driver, allow it to take the interconnect and OPP information from DT and clean it up (Dmitry Osipenko). - Add interconnect support to the exynos-bus devfreq driver along with interconnect properties documentation (Sylwester Nawrocki). - Add suport for AMD Fam17h and Fam19h processors to the RAPL power capping driver (Victor Ding, Kim Phillips). - Fix handling of overly long constraint names in the powercap framework (Lukasz Luba). - Fix the wakeup configuration handling for bridges in the ACPI device power management core (Rafael Wysocki). - Add support for using an abstract scale for power units in the Energy Model (EM) and document it (Lukasz Luba). - Add em_cpu_energy() micro-optimization to the EM (Pavankumar Kondeti). - Modify the generic power domains (genpd) framwework to support suspend-to-idle (Ulf Hansson). - Fix creation of debugfs nodes in genpd (Thierry Strudel). - Clean up genpd (Lina Iyer). - Clean up the core system-wide suspend code and make it print driver flags for devices with debug enabled (Alex Shi, Patrice Chotard, Chen Yu). - Modify the ACPI system reboot code to make it prepare for system power off to avoid confusing the platform firmware (Kai-Heng Feng). - Update the pm-graph (multiple changes, mostly usability-related) and cpupower (online and offline CPU information support) PM utilities (Todd Brandt, Brahadambal Srinivasan)" * tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits) cpufreq: Fix cpufreq_online() return value on errors cpufreq: Fix up several kerneldoc comments cpufreq: stats: Use local_clock() instead of jiffies cpufreq: schedutil: Simplify sugov_update_next_freq() cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate() PM: domains: create debugfs nodes when adding power domains opp: of: Allow empty opp-table with opp-shared dt-bindings: opp: Allow empty OPP tables media: venus: dev_pm_opp_put_*() accepts NULL argument drm/panfrost: dev_pm_opp_put_*() accepts NULL argument drm/lima: dev_pm_opp_put_*() accepts NULL argument PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table opp: Don't create an OPP table from dev_pm_opp_get_opp_table() cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table opp: Reduce the size of critical section in _opp_kref_release() PM / EM: Micro optimization in em_cpu_energy cpufreq: arm_scmi: Discover the power scale in performance protocol ...
2020-12-11Merge tag 'devfreq-next-for-5.11' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq updates for 5.11 from Chanwoo Choi: 1. Update devfreq core - Add new devfreq_frequency tracepoint to show the frequency change information. - Add governor feature flag. The devfreq governor is able to set the specific flag in order to support a non-common feature. For example, if the governor supports the 'immutable' feature, don't allow user space to change the governor via sysfs. - Add governor sysfs attribute flag for each sysfs file. Prior to that the devfreq subsystem allowed all of the sysfs files to be accessed regardless of the governor type. But some sysfs fils are not supported by specific devfreq governors. In order to only allow the sysfs files supported by the governor to be accessed, clarify the access permissions of sysfs attributes according to the governor. When adding the devfreq governor, specify the available attribute information by using DEVFREQ_GOV_ATTR_* symbols. The user can read or write the sysfs attributes in accordance to the specified access permissions. - Clean-up the code to reduce duplication for the devfreq tracepoint and to remove redundant governor_name field from struct devfreq. 2. Update exynos-bus.c devfreq driver - Add interconnect API support to the Samsung Exynos Bus Frequency driver, exynos-bus.c. Complementing the devfreq driver with interconnect functionality allows to ensure that the QoS requirements regarding devices accessing the system memory (e.g. video processing devices) will be met and allows to avoid issues like DMA underrun. 3. Update tegra devfreq driver - Add interconnect support and OPP interface to tegra30-devfreq.c. Also, it is to guarantee the QoS requirement of some devices like the display controller. - Move tegra20-devfreq.c from drivers/devfreq/ into drivers/memory/tegra/ in order to use the more proper monitoring feature such as EMC_STAT which is located in drivers/memory/tegra/. - Separate the configuration information for different SoCs in tegra30-devfrqe.c. The tegra30-devfreq.c had been supporting both tegra30-actmon and tegra124-actmon devices. In order to use the more correct configuration data, separate them. - Use dev_err_probe() to handle the deferred probe error in tegra30-devfreq.c. 4. Pull the request of 'Tegra SoC and clock controller changes for v5.11' sent by Krzysztof Kozlowski <krzk@kernel.org> in order to avoid a build error." * tag 'devfreq-next-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: tegra30: Separate configurations per-SoC generation PM / devfreq: tegra30: Support interconnect and OPPs from device-tree PM / devfreq: tegra20: Deprecate in a favor of emc-stat based driver PM / devfreq: exynos-bus: Add registration of interconnect child device dt-bindings: devfreq: Add documentation for the interconnect properties soc/tegra: fuse: Add stub for tegra_sku_info soc/tegra: fuse: Export tegra_read_ram_code() clk: tegra: Export Tegra20 EMC kernel symbols PM / devfreq: tegra30: Silence deferred probe error PM / devfreq: tegra20: Relax Kconfig dependency PM / devfreq: tegra20: Silence deferred probe error PM / devfreq: Remove redundant governor_name from struct devfreq PM / devfreq: Add governor attribute flag for specifc sysfs nodes PM / devfreq: Add governor feature flag PM / devfreq: Add tracepoint for frequency changes PM / devfreq: Unify frequency change to devfreq_update_target func trace: events: devfreq: Use fixed indentation size to improve readability
2020-12-10clk: tegra: Fix duplicated SE clock entryDmitry Osipenko
The periph_clks[] array contains duplicated entry for Security Engine clock which was meant to be defined for T210, but it wasn't added properly. This patch corrects the T210 SE entry and fixes the following error message on T114/T124: "Tegra clk 127: register failed with -17". Fixes: dc37fec48314 ("clk: tegra: periph: Add new periph clks and muxes for Tegra210") Tested-by Nicolas Chauvet <kwizart@gmail.com> Reported-by Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201025224212.7790-1-digetx@gmail.com Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: rpmh: add support for SM8350 rpmh clocksVinod Koul
This adds the RPMH clocks present in SM8350 SoC Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201208064702.3654324-3-vkoul@kernel.org [sboyd@kernel.org: Move sdx55 to the right place] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: lpasscc: Introduce pm autosuspend for SC7180Taniya Das
The LPASSCC driver's suspend/resume is invoked multiple number of times and thus allow the device to autosuspend for 500ms. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1605890417-721-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2Douglas Anderson
50 MHz is an incredibly common clock rate for SD cards to run at. It's "high speed" mode in SD (not very fast these days, but it used to be) or: #define HIGH_SPEED_MAX_DTR 50000000 If we don't support this then older "high speed" cards can only run at 25 MHz or at half their normal speed. There doesn't seem to be any reason to skip this clock rate, so add it. Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201210102234.2.I26dcc0cee374f5571d9929c9985f463773167e68@changeid Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: gcc-sc7180: Use floor ops for sdcc clksDouglas Anderson
I would repeat the same commit message that was in commit 5e4b7e82d497 ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems silly to do so when you could just go read that commit. NOTE: this is actually extra terrible because we're missing the 50 MHz rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2")). That means then when you run an older SD card it'll try to clock it at 100 MHz when it's only specced to run at 50 MHz max. As you can probably guess that doesn't work super well. Signed-off-by: Douglas Anderson <dianders@chromium.org> Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Link: https://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: scpi: mark scpi_clk_match as maybe unusedKrzysztof Kozlowski
The scpi_clk_match (struct of_device_id) is referenced only with CONFIG_OF builds thus mark it as __maybe_unused: drivers/clk/clk-scpi.c:132:34: warning: ‘scpi_clk_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201103162435.13689-8-krzk@kernel.org Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: pwm: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might be not relevant here). This fixes compile warning (!CONFIG_OF && !CONFIG_MODULES): drivers/clk/clk-pwm.c:139:34: warning: ‘clk_pwm_dt_ids’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201103162435.13689-1-krzk@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: renesas: sh73a0: Stop using __raw_*() I/O accessorsGeert Uytterhoeven
There is no reason to keep on using the __raw_{read,write}l() I/O accessors in Renesas ARM driver code. Switch to using the plain {read,write}l() I/O accessors, to have a chance that this works on big-endian. Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201119125053.4065746-1-geert+renesas@glider.be
2020-12-10clk: renesas: r8a774c0: Add RPC clocksLad Prabhakar
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the RZ/G2E (R8A774C0) CPG/MSSR driver. Add new clk type CLK_TYPE_GEN3_E3_RPCSRC to register rpcsrc as a fixed clock on R-Car Gen3 E3 (and also RZ/G2E which is identical to E3 SoC), parent and the divider is set based on the register value CPG_RPCCKCR[4:3] which has been set prior to booting the kernel. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20201116101002.5986-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a779a0: Fix R and OSC clocksGeert Uytterhoeven
The R-Car V3U clock driver defines the R and OSC clocks using R-Car Gen3 clock types. However, The R-Car V3U clock driver does not use the R-Car Gen3 clock driver core, hence registering the R and OSC clocks fails: renesas-cpg-mssr e6150000.clock-controller: Failed to register core clock osc: -22 renesas-cpg-mssr e6150000.clock-controller: Failed to register core clock r: -22 Fix this by introducing clock definition macros specific to R-Car V3U. Note that rcar_r8a779a0_cpg_clk_register() already handled the related clock types. Drop the now unneeded include of rcar-gen3-cpg.h. Fixes: 17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201109152614.2465483-1-geert+renesas@glider.be
2020-12-10clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_privKrzysztof Kozlowski
The struct cpg_mssr_priv missed proper formatting: drivers/clk/renesas/renesas-cpg-mssr.c:142: warning: cannot understand function prototype: 'struct cpg_mssr_priv ' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201103162435.13689-7-krzk@kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get()Yejune Deng
devm_reset_control_array_get_shared() looks more readable Signed-off-by: Yejune Deng <yejune.deng@gmail.com> Link: https://lore.kernel.org/r/1604375093-6451-1-git-send-email-yejune.deng@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a774b1: Add RPC clocksBiju Das
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the RZ/G2N (R8A774B1) CPG/MSSR driver. Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks"). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20201016121709.8447-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a774a1: Add RPC clocksBiju Das
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the RZ/G2M (R8A774A1) CPG/MSSR driver. Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks"). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20201016121709.8447-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a779a0: Add VIN clocksJacopo Mondi
Add definitions of the VIN instance clocks for R-Car V3U. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20201016111158.17521-5-jacopo+renesas@jmondi.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a779a0: Add CSI4[0-3] clocksJacopo Mondi
Add definitions of the CSI-2 receiver clocks for R-Car V3U. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20201016111158.17521-2-jacopo+renesas@jmondi.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() staticGeert Uytterhoeven
When compiling with clang: drivers/clk/renesas/r8a779a0-cpg-mssr.c:156:21: warning: no previous prototype for function 'rcar_r8a779a0_cpg_clk_register' [-Wmissing-prototypes] struct clk * __init rcar_r8a779a0_cpg_clk_register(struct device *dev, ^ drivers/clk/renesas/r8a779a0-cpg-mssr.c:156:1: note: declare 'static' if the function is not intended to be used outside of this translation unit struct clk * __init rcar_r8a779a0_cpg_clk_register(struct device *dev, ^ static Similarly, with sparse: drivers/clk/renesas/r8a779a0-cpg-mssr.c:156:12: warning: symbol 'rcar_r8a779a0_cpg_clk_register' was not declared. Should it be static? There are no users of rcar_r8a779a0_cpg_clk_register() outside this file, so it should be static. Fixes: 17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200924111808.15358-1-geert+renesas@glider.be
2020-12-09Merge tag 'samsung-drivers-5.11-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers Samsung SoC drivers changes for v5.11, part two 1. Mark PM functions of newly added clkout module as unused to silence !CONFIG_PM warnings. 2. Initialize ChipID driver later - in arch initcall. * tag 'samsung-drivers-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name Link: https://lore.kernel.org/r/20201207074528.4475-1-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'omap-for-v5.11/genpd-drivers-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers Driver changes for omaps for genpd for v5.11 merge window This series of changes allows booting am335x with genpd and device tree data without the legacy platform data. Also at least am437x can be booted with gendp with power domain and dts data. The SoC specific dts changes will be a separate pull request. We need the following driver changes merged before the dts changes can be done: - platform code needs a few improvments to probe l4_wkup first for clocks, and to bail out when there is no platform data - ti-sysc driver needs a non-urgent fix for asserting rstctrl reset only after disabling the clocks, to probe modules with no known control registers, and added quirk handling for gpmc devices - omap-prm driver needs a non-urgent fix for reset status bit, support added for pm_clk, and then we add the rest of am335x power domain data - clock driver for am335x needs to keep l3_main clock enabled with genpd for suspend and resume to work - wkup_m3 remoteproc driver needs support added for reset control if available instead of the legacy pdata callbacks - pm33xx driver needs PM runtime support added for genpd The am335x specific driver changes for the clock, wkup_m3, pm33xx and remoteproc drivers are quite trivial and have not caused merge conflicts in Linux next. I did not get acks for these changes except from Santosh but had already pushed out the branch already at that point. So I've added the related driver maintainers to Cc. * tag 'omap-for-v5.11/genpd-drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: remoteproc/wkup_m3: Use reset control driver if available soc: ti: pm33xx: Enable basic PM runtime support for genpd soc: ti: omap-prm: am3: add genpd support for remaining PRM instances soc: ti: omap-prm: Add pm_clk for genpd clk: ti: am33xx: Keep am3 l3 main clock always on for genpd bus: ti-sysc: Implement GPMC debug quirk to drop platform data bus: ti-sysc: Support modules without control registers ARM: OMAP2+: Probe PRCM first to probe l4_wkup with simple-pm-bus ARM: OMAP2+: Check for inited flag bus: ti-sysc: Assert reset only after disabling clocks soc: ti: omap-prm: Do not check rstst bit on deassert if already deasserted bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw bus: ti-sysc: Fix reset status check for modules with quirks ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS Link: https://lore.kernel.org/r/pull-1606806458-694517@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07clk: qcom: Add GDSC support for SDX55 GCCManivannan Sadhasivam
Add GDSC support to control the power supply of power domains in SDX55 GCC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20201126072844.35370-7-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: qcom: Add support for SDX55 RPMh clocksManivannan Sadhasivam
Add support for following clocks maintained by RPMh in SDX55 SoCs. * BI TCXO * RF_CLK1 * RF_CLK1_AO * RF_CLK2 * RF_CLK2_AO * QPIC (Qualcomm Technologies, Inc. Parallel Interface Controller) Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201126072844.35370-5-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: qcom: Add SDX55 GCC supportNaveen Yadav
Add Global Clock Controller (GCC) support for SDX55 SoCs from Qualcomm. Signed-off-by: Naveen Yadav <naveenky@codeaurora.org> [mani: converted to parent_data, commented critical clocks, cleanups] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201126072844.35370-3-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: fsl-flexspi: new driverMichael Walle
Add support for the FlexSPI clock on Freescale Layerscape SoCs. The clock is a simple divider based one and is located inside the device configuration space (DCFG). This will allow switching the SCK frequencies for the FlexSPI interface on the LS1028A and the LX2160A. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20201108185113.31377-8-michael@walle.cc [sboyd@kernel.org: Drop modalias, add module table] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: divider: add devm_clk_hw_register_divider_table()Michael Walle
This will simplify drivers which would only unregister the clk in their remove() op. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20201108185113.31377-6-michael@walle.cc Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 08:48:29 +0000