summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2022-02-24clk: qcom: gdsc: Add support to update GDSC transition delayTaniya Das
GDSCs have multiple transition delays which are used for the GDSC FSM states. Older targets/designs required these values to be updated from gdsc code to certain default values for the FSM state to work as expected. But on the newer targets/designs the values updated from the GDSC driver can hamper the FSM state to not work as expected. On SC7180 we observe black screens because the gdsc is being enabled/disabled very rapidly and the GDSC FSM state does not work as expected. This is due to the fact that the GDSC reset value is being updated from SW. Thus add support to update the transition delay from the clock controller gdscs as required. Fixes: 45dd0e55317cc ("clk: qcom: Add support for GDSCs) Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/20220223185606.3941-1-tdas@codeaurora.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-24clk: qcom: ipq8074: Use floor ops for SDCC1 clockDirk Buchwalder
Use floor ops on SDCC1 APPS clock in order to round down selected clock frequency and avoid overclocking SD/eMMC cards. For example, currently HS200 cards were failling tuning as they were actually being clocked at 384MHz instead of 192MHz. This caused some boards to disable 1.8V I/O and force the eMMC into the standard HS mode (50MHz) and that appeared to work despite the eMMC being overclocked to 96Mhz in that case. There was a previous commit to use floor ops on SDCC clocks, but it looks to have only covered SDCC2 clock. Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks") Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de> Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220210173100.505128-1-robimarko@gmail.com
2022-02-24clk: rockchip: re-add rational best approximation algorithm to the ↵Quentin Schulz
fractional divider In commit 4e7cf74fa3b2 ("clk: fractional-divider: Export approximation algorithm to the CCF users"), the code handling the rational best approximation algorithm was replaced by a call to the core clk_fractional_divider_general_approximation function which did the same thing back then. However, in commit 82f53f9ee577 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag"), this common code was made conditional on CLK_FRAC_DIVIDER_POWER_OF_TWO_PS flag which was not added back to the rockchip clock driver. This broke the ltk050h3146w-a2 MIPI DSI display present on a PX30-based downstream board. Let's add the flag to the fractional divider flags so that the original and intended behavior is brought back to the rockchip clock drivers. Fixes: 82f53f9ee577 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag") Cc: stable@vger.kernel.org Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20220131163224.708002-1-quentin.schulz@theobroma-systems.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-02-23clk/rockchip: Use of_device_get_match_data()Minghao Chi (CGEL ZTE)
Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220221020103.1925026-1-chi.minghao@zte.com.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-02-23remove the h8300 architectureChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-02-22clk: renesas: r8a779f0: Add PFC clockGeert Uytterhoeven
Add the module clock used by the Pin Function (PFC/GPIO) controller on the Renesas R-Car S4-8 (R8A779F0) SoC. Extracted from a larger patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/4ef3d3dfe714ad75112e4886efea0b66e40a33bc.1645457502.git.geert+renesas@glider.be
2022-02-22clk: renesas: r8a779f0: Add I2C clocksGeert Uytterhoeven
Add the module clocks used by the I2C Bus Interfaces on the Renesas R-Car S4-8 (R8A779F0) SoC. Extracted from a larger patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/e4dcee5f6f521dccd7ac7f2fb6c86cfe4a24d032.1643898820.git.geert+renesas@glider.be
2022-02-22clk: renesas: r8a779f0: Add WDT clockGeert Uytterhoeven
Add the module clock used by the RCLK Watchdog Timer (RWDT) on the Renesas R-Car S4-8 (r8a779f0) SoC. Mark it as a critical clock, to ensure uninterrupted watchdog operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/8d9b280065a663f2cf31db7b21a010aa781a0af1.1642525158.git.geert+renesas@glider.be
2022-02-22clk: renesas: r8a779f0: Fix RSW2 clock dividerGeert Uytterhoeven
According to Section 8.1.2 Figure 8.1.1 ("Block Diagram of CPG"), Note 22 ("RSW2 divider"), and Table 8.1.4d ("Lists of CPG clocks generated from CPGMA1"), the RSwitch2 and PCI Express clock is generated from PLL5 by dividing by two, followed by the RSW2 divider. As PLL5 runs at 3200 MHz, and RSW2 is fixed to 320 MHz, the RSW2 divider must be 5. Correct the parent and the fixed divider. Fixes: 24aaff6a6ce4c4de ("clk: renesas: cpg-mssr: Add support for R-Car S4-8") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/d6a406f31e6f02f892e0253f4e8a9a2f68fd652e.1641566003.git.geert+renesas@glider.be
2022-02-21clk: imx8mp: Add missing IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT clockLaurent Pinchart
The IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT clock derives from the media_mipi_phy1_ref clock and is gated by the shared media clock gate. Its identifier is defined in dt-bindings/clock/imx8mp-clock.h but its definition is missing from the driver. Add it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Link: https://lore.kernel.org/r/20220211091311.28146-1-laurent.pinchart@ideasonboard.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2022-02-21clk: scmi: Support atomic clock enable/disable APICristian Marussi
Support also atomic enable/disable clk_ops beside the bare non-atomic one (prepare/unprepare) when the underlying SCMI transport is configured to support atomic transactions for synchronous commands. Compare the SCMI system-wide configured atomic threshold latency time and the per-clock advertised enable latency (if any) to choose whether to provide sleeping prepare/unprepare vs atomic enable/disable. Link: https://lore.kernel.org/r/20220217131234.50328-9-cristian.marussi@arm.com Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-17clk: jz4725b: fix mmc0 clock gatingSiarhei Volkau
The mmc0 clock gate bit was mistakenly assigned to "i2s" clock. You can find that the same bit is assigned to "mmc0" too. It leads to mmc0 hang for a long time after any sound activity also it prevented PM_SLEEP to work properly. I guess it was introduced by copy-paste from jz4740 driver where it is really controls I2S clock gate. Fixes: 226dfa4726eb ("clk: Add Ingenic jz4725b CGU driver") Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Tested-by: Siarhei Volkau <lis8215@gmail.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220205171849.687805-2-lis8215@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: qcom: gcc-msm8994: Remove NoC clocksKonrad Dybcio
Just like in commit 05cf3ec00d46 ("clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk") adding NoC clocks turned out to be a huge mistake, as they cause a lot of issues at little benefit (basically letting Linux know about their children's frequencies), especially when mishandled or misconfigured. Adding these ones broke SDCC approx 99 out of 100 times, but that somehow went unnoticed. To prevent further issues like this one, remove them. This commit is effectively a revert of 74a33fac3aab ("clk: qcom: gcc-msm8994: Add missing NoC clocks") with ABI preservation. Fixes: 74a33fac3aab ("clk: qcom: gcc-msm8994: Add missing NoC clocks") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220217232408.78932-1-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mvebu: use time_is_before_eq_jiffies() instead of open coding itWang Qing
Use the helper function time_is_{before,after}_jiffies() to improve code readability. Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1644890154-64915-3-git-send-email-wangqing@vivo.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: Warn if clk IDs are duplicatedChen-Yu Tsai
The Mediatek clk driver library handles duplicate clock IDs in two different ways: either ignoring the duplicate entry, or overwriting the old clk. Either way may cause unexpected behavior, and the latter also causes an orphan clk that cannot be cleaned up. Align the behavior so that later duplicate entries are ignored, and a warning printed. The warning will also aid in making the issue noticeable. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-32-wenst@chromium.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: mt8195: Implement remove functionsChen-Yu Tsai
Until now the mediatek clk driver library did not have any way to unregister clks, and so none of the drivers implemented remove functions. Now that the library does have APIs to unregister clks, use them to implement remove functions for the mt8195 clk drivers. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Link: https://lore.kernel.org/r/20220208124034.414635-31-wenst@chromium.org Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: mt8195: Implement error handling in probe functionsChen-Yu Tsai
Until now the mediatek clk driver library did not have any way to unregister clks, and so all drivers did not do proper cleanup in their error paths. Now that the library does have APIs to unregister clks, use them in the error path of the probe functions for the mt8195 clk drivers to do proper cleanup. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220208124034.414635-30-wenst@chromium.org Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: mt8195: Hook up mtk_clk_simple_remove()Chen-Yu Tsai
Various small clock controllers only have clock gates, and utilize mtk_clk_simple_probe() as their driver probe function. Now that we have a matching remove function, hook it up for the relevant drivers. This was done with the following command: sed -i -e '/mtk_clk_simple_probe/a \ .remove = mtk_clk_simple_remove,' drivers/clk/mediatek/clk-mt8195-*.c Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Link: https://lore.kernel.org/r/20220208124034.414635-29-wenst@chromium.org Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: Unregister clks in mtk_clk_simple_probe() error pathChen-Yu Tsai
Until now the mediatek clk driver library did not have any way to unregister clks, and so all drivers did not do proper cleanup in their error paths. Now that the library does have APIs to unregister clks, use them in the error path of mtk_clk_simple_probe() to do proper cleanup. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-28-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: mtk: Implement error handling in register APIsChen-Yu Tsai
The remaining clk registration functions do not stop or return errors if any clk failed to be registered, nor do they implement error handling paths. This may result in a partially working device if any step fails. Make the register functions return proper error codes, and bail out if errors occur. Proper cleanup, i.e. unregister any clks that were successfully registered, is done in the new error path. This also makes the |struct clk_data *| argument mandatory, as it is used to track the list of clks registered. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-27-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: pll: Implement error handling in register APIChen-Yu Tsai
The pll clk type registration function does not stop or return errors if any clk failed to be registered, nor does it implement an error handling path. This may result in a partially working device if any step failed. Make the register function return proper error codes, and bail out if errors occur. Proper cleanup, i.e. unregister any clks that were successfully registered, and unmap the I/O space, is done in the new error path. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-26-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: mux: Implement error handling in register APIChen-Yu Tsai
The mux clk type registration function does not stop or return errors if any clk failed to be registered, nor does it implement an error handling path. This may result in a partially working device if any step failed. Make the register function return proper error codes, and bail out if errors occur. Proper cleanup, i.e. unregister any clks that were successfully registered, is done in the new error path. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-25-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: mux: Reverse check for existing clk to reduce nesting levelChen-Yu Tsai
The clk registration code here currently does: if (IS_ERR_OR_NULL(clk_data->clks[mux->id])) { ... do clk registration ... } This extra level of nesting wastes screen real estate. Reduce the nesting level by reversing the conditional shown above. Other than that, functionality is not changed. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-24-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: gate: Implement error handling in register APIChen-Yu Tsai
The gate clk type registration function does not stop or return errors if any clk failed to be registered, nor does it implement an error handling path. This may result in a partially working device if any step failed. Make the register function return proper error codes, and bail out if errors occur. Proper cleanup, i.e. unregister any clks that were successfully registered, is done in the new error path. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-23-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: cpumux: Implement error handling in register APIChen-Yu Tsai
The cpumux clk type registration function does not stop or return errors if any clk failed to be registered, nor does it implement an error handling path. This may result in a partially working device if any step failed. Make the register function return proper error codes, and bail out if errors occur. Proper cleanup, i.e. unregister any clks that were successfully registered, is done in the new error path. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-22-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: mtk: Clean up included headersChen-Yu Tsai
Some included headers aren't actually used anywhere, while other headers with the declaration of functions and structures aren't directly included. Get rid of the unused ones, and add the ones that should be included directly. On the header side, replace headers that are included purely for data structure definitions with forward declarations. This decreases the amount of preprocessing and compilation effort required for each inclusion. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-21-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: Add mtk_clk_simple_remove()Chen-Yu Tsai
In commit c58cd0e40ffa ("clk: mediatek: Add mtk_clk_simple_probe() to simplify clock providers"), a generic probe function was added to simplify clk drivers that only needed to support clk gates. However due to the lack of unregister APIs, a corresponding remove function was not added. Now that the unregister APIs have been implemented, add aforementioned remove function to make it complete. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-20-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: Implement mtk_clk_unregister_composites() APIChen-Yu Tsai
mtk_clk_register_composites(), as the name suggests, is used to register a given list of composite clks. However it is lacking a counterpart unregister API. Implement said unregister API so that the various clock platform drivers can utilize it to do proper unregistration, cleanup and removal. In the header file, the register function's declaration is also reformatted to fit code style guidelines. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Link: https://lore.kernel.org/r/20220208124034.414635-19-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: Implement mtk_clk_unregister_divider_clks() APIChen-Yu Tsai
mtk_clk_register_divider_clks(), as the name suggests, is used to register a given list of divider clks. However it is lacking a counterpart unregister API. Implement said unregister API so that the various clock platform drivers can utilize it to do proper unregistration, cleanup and removal. In the header file, the register function's declaration is also reformatted to fit code style guidelines. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-18-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: Implement mtk_clk_unregister_factors() APIChen-Yu Tsai
mtk_clk_register_factors(), as the name suggests, is used to register a given list of fixed factor clks. However it is lacking a counterpart unregister API. Implement said unregister API so that the various clock platform drivers can utilize it to do proper unregistration, cleanup and removal. In the header file, the register function's declaration is also reformatted to fit code style guidelines. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-17-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: Implement mtk_clk_unregister_fixed_clks() APIChen-Yu Tsai
mtk_clk_register_fixed_clks(), as the name suggests, is used to register a given list of fixed rate clks. However it is lacking a counterpart unregister API. Implement said unregister API so that the various clock platform drivers can utilize it to do proper unregistration, cleanup and removal. In the header file, the register function's declaration is also reformatted to fit code style guidelines. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-16-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: pll: Clean up included headersChen-Yu Tsai
Some included headers aren't actually used anywhere, while other headers with the declaration of functions and structures aren't directly included. Get rid of the unused ones, and add the ones that should be included directly. Also, copy the MHZ macro from clk-mtk.h, and drop clk-mtk.h from the included headers. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-15-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: pll: Implement unregister APIChen-Yu Tsai
The PLL clk type within the MediaTek clk driver library only has a register function, and no corresponding unregister function. This means there is no way for its users to properly implement cleanup and removal. Add a matching unregister function for the PLL type clk. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-14-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: pll: Split definitions into separate header fileChen-Yu Tsai
When the PLL type clk was implemented in the MediaTek clk driver library, the data structure definitions and function declaration were put in the common header file. Since it is its own type of clk, and not all platform clk drivers utilize it, having the definitions in the common header results in wasted cycles during compilation. Split out the related definitions and declarations into its own header file, and include that only in the platform clk drivers that need it. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-13-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: mux: Clean up included headersChen-Yu Tsai
Some included headers aren't actually used anywhere, while other headers with the declaration of functions and structures aren't directly included. Get rid of the unused ones, and add the ones that should be included directly. On the header side, replace headers that are included purely for data structure definitions with forward declarations. This decreases the amount of preprocessing and compilation effort required for each inclusion. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-12-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: mux: Internalize struct mtk_clk_muxChen-Yu Tsai
struct mtk_clk_mux is an implementation detail of the mux clk type, and is not used outside of the implementation. Internalize the definition to minimize leakage of details and shrink the header file. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-11-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: mux: Implement unregister APIChen-Yu Tsai
The mux clk type within the MediaTek clk driver library only has a register function, and no corresponding unregister function. This means there is no way for its users to properly implement cleanup and removal. Add a matching unregister function for the mux type clk. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-10-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: cpumux: Clean up included headersChen-Yu Tsai
Some headers with the declaration of functions and structures aren't directly included. Explicitly include them so that future changes to other headers would not result in an unexpected build break. On the header side, add forward declarations for any data structures whose pointers are used in function signatures. No headers are required. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-9-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: cpumux: Internalize struct mtk_clk_cpumuxChen-Yu Tsai
struct mtk_clk_cpumux is an implementation detail of the cpumux clk type, and is not used outside of the implementation. Internalize the definition to minimize leakage of details and shrink the header file. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-8-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: cpumux: Implement unregister APIChen-Yu Tsai
The cpumux clk type within the MediaTek clk driver library only has a register function, and no corresponding unregister function. This means there is no way for its users to properly implement cleanup and removal. Add a matching unregister function for the cpumux type clk. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-7-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: gate: Clean up included headersChen-Yu Tsai
Some included headers aren't actually used anywhere, while other headers with the declaration of functions and structures aren't directly included. Get rid of the unused ones, and add the ones that should be included directly. On the header side, replace headers that are included purely for data structure definitions with forward declarations. This decreases the amount of preprocessing and compilation effort required for each inclusion. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-6-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: gate: Implement unregister APIChen-Yu Tsai
The gate clk type within the MediaTek clk driver library only has a register function, and no corresponding unregister function. This means there is no way for its users to properly implement cleanup and removal. Add a matching unregister function for the gate type clk. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-5-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: gate: Internalize clk implementationChen-Yu Tsai
struct mtk_clk_gate and mtk_clk_register_gate() are not used outside of the gate clk library. Only the API that handles a list of clks is used by the individual platform clk drivers. Internalize the parts that aren't used outside of the implementation. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-4-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: gate: Consolidate gate type clk related codeChen-Yu Tsai
Right now some bits of the gate type clk code are in clk-gate.[ch], but other bits are in clk-mtk.[ch]. This is different from the cpumux and mux type clks, for which all of the code are found in the same files. Move the functions that register multiple clks from a given list, mtk_clk_register_gates_with_dev() and mtk_clk_register_gates(), to clk-gate.[ch] to consolidate all the code for the gate type clks. This commit only moves code with minor whitespace fixups to correct the code style. Further improvements, such as internalizing various functions and structures will be done in later commits. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-3-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-17clk: mediatek: Use %pe to print errorsChen-Yu Tsai
If %pe is used to print errors, a string representation of the error would be printed instead of a number as with %ld. Also, all the sites printing errors are deriving the error code from a pointer. Using %pe is more straightforward. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220208124034.414635-2-wenst@chromium.org Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-15clk: ralink: make system controller node a reset providerSergio Paracuellos
MT7621 system controller node is already providing the clocks for the whole system but must also serve as a reset provider. Hence, add reset controller related code to the clock driver itself. To get resets properly ready for the rest of the world we need to move platform driver initialization process to 'arch_initcall'. CC: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20220210094859.927868-3-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-10clk: qcom: Add MSM8226 Multimedia Clock Controller supportBartosz Dudziak
Modify the existing MSM8974 multimedia clock controller driver to support the MMCC found on MSM8226 based devices. This should allow most multimedia device drivers to probe and control their clocks. Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220207185411.19118-3-bartosz.dudziak@snejp.pl
2022-02-10clk: qcom: gcc-msm8996: start getting rid of xo clkDmitry Baryshkov
The "xo" fixed_factor clock is a leftover/hack from a time when we couldn't make rpmhcc the root of all clocks. It is going to be removed once all users of this clock are converted to use clocks specified through the DTS. Replace internal usage of the xo clock with the cxo (RPM_SMD_BB_CLK1) parent, specifying xo_board as a fallback. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-17-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-16-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: move clock parent tables downDmitry Baryshkov
Move clock parent tables down, after the GPLL declrataions, so that we can use gpll hw clock fields in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-15-dmitry.baryshkov@linaro.org
generated by cgit (git 2.34.1) at 2025-09-16 11:13:24 +0000