summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2022-11-22Merge tag 'samsung-clk-6.2' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-fixes Pull Samsung SoC clk driver fixes from Krzysztof Kozlowski: - Fix calling of_device_get_match_data() on wrong device (parent's) in Exynos clock out driver - Correct clock name in bindings of ExynosAutov9 clocks - Correct parents of div4 clock on Exynos7885 * tag 'samsung-clk-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: clk: samsung: Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()" dt-bindings: clock: exynosautov9: fix reference to CMU_FSYS1 clk: samsung: exynos7885: Correct "div4" clock parents
2022-11-22clk: imx: imxrt1050: add IMXRT1050_CLK_LCDIF_PIX clock gateGiulio Benetti
Add IMXRT1050_CLK_LCDIF_PIX clock gate. Cc: Jesse Taube <mr.bossman075@gmail.com> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Acked-by: Jesse Taube <mr.bossman075@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221117181014.851505-2-giulio.benetti@benettiengineering.com
2022-11-22clk: imx: imxrt1050: fix IMXRT1050_CLK_LCDIF_APB offsetsGiulio Benetti
Fix IMXRT1050_CLK_LCDIF_APB offsets. Fixes: 7154b046d8f3 ("clk: imx: Add initial support for i.MXRT1050 clock driver") Cc: Jesse Taube <mr.bossman075@gmail.com> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221117181014.851505-1-giulio.benetti@benettiengineering.com
2022-11-22clk: imx8mp: Add audio shared gateAbel Vesa
According to the RM, the CCGR101 is shared for the following root clocks: - AUDIO_AHB_CLK_ROOT - AUDIO_AXI_CLK_ROOT - SAI1_CLK_ROOT - SAI2_CLK_ROOT - SAI3_CLK_ROOT - SAI5_CLK_ROOT - SAI6_CLK_ROOT - SAI7_CLK_ROOT - PDM_CLK_ROOT IMX8MP_CLK_AUDIO_ROOT is same as AUDIO_AHB_CLK_ROOT which can avoid break any users. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1667811007-19222-3-git-send-email-shengjiu.wang@nxp.com
2022-11-22clk: imx: pll14xx: Add 320 MHz and 640 MHz entries for PLL146xMarek Vasut
The PLL146x is used to implement SYS_PLL3 on i.MX8MP and can be used to drive UARTn_ROOT clock. By setting the PLL3 to 320 MHz or 640 MHz, the PLL3 output can be divided down to supply UARTn_ROOT clock with precise 64 MHz, which divided down further by 16x oversampling factor used by the i.MX UART core yields 4 Mbdps baud base for the UART IP. This is useful e.g. for BCM bluetooth chips, which can operate up to 4 Mbdps. Add 320 MHz and 640 MHz entries so the PLL can be configured accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221031204838.195292-1-marex@denx.de
2022-11-22clk: imx93: keep sys ctr clock always onJacky Bai
Keep sys ctr clock always on to make sure its register can be accessed for cpuidle. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221028095211.2598312-7-peng.fan@oss.nxp.com
2022-11-22clk: imx: keep hsio bus clock always onJacky Bai
During Linux System suspend/resume stress test after System Sleep enabled, system will stuck sometimes. It is because NICMIX is powered down, which HSIOMIX(always on) is not powered down. When NICMIX powering down, HSIOMIX will get a hardware handshake, without HSIO ROOT clk, the handshake will lose. Then after NICMIX power on when system resume, the access to HSIOMIX through NICMIX would be broken. So keep HSIO ROOT always on. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221028095211.2598312-6-peng.fan@oss.nxp.com
2022-11-21clk: imx93: drop tpm1/3, lpit1/2 clkPeng Fan
Per Reference Mannual System Clocks Table, LPIT1 and TPM1 sources from bus_aon_root LPIT2 and TPM3 sources from bus_wakeup_root So update driver to reflect that. Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221028095211.2598312-5-peng.fan@oss.nxp.com
2022-11-21clk: imx93: correct enet clockPeng Fan
Per update Reference Mannual, correct the enet clock parent to wakeup_axi_root. Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk") Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221028095211.2598312-3-peng.fan@oss.nxp.com
2022-11-21clk: imx93: unmap anatop base in error handling pathPeng Fan
The anatop base is not unmapped during error handling path, fix it. Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20221028095211.2598312-2-peng.fan@oss.nxp.com
2022-11-21clk: imx: imx8mp: add shared clk gate for usb suspend clkLi Jun
32K usb suspend clock gate is shared with usb_root_clk, this shared clock gate was initially defined only for usb suspend clock, usb suspend clk is kept on while system is active or system sleep with usb wakeup enabled, so usb root clock is fine with this situation; with the commit cf7f3f4fa9e5 ("clk: imx8mp: fix usb_root_clk parent"), this clock gate is changed to be for usb root clock, but usb root clock will be off while usb is suspended, so usb suspend clock will be gated too, this cause some usb functionalities will not work, so define this clock to be a shared clock gate to conform with the real HW status. Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver") Cc: stable@vger.kernel.org # v5.19+ Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1664549663-20364-2-git-send-email-jun.li@nxp.com
2022-11-21clk: imx93: correct the flexspi1 clock settingHaibo Chen
Correct IMX93_CLK_FLEXSPI1_GATE CCGR setting. Otherwise the flexspi always can't be assigned to a parent clock when dump the clock tree. Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk") Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/1666589199-1199-1-git-send-email-haibo.chen@nxp.com
2022-11-19clk: tegra: Support BPMP-FW ABI deny flagsPeter De Schrijver
Support BPMP_CLK_STATE_CHANGE_DENIED by not populating state changing operations when the flag is set. Support BPMP_CLK_RATE_PARENT_CHANGE_DENIED by not populating rate or parent changing operations when the flag is set. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-11-17ARM: at91: rm9200: fix usb device clock idMichael Grzeschik
Referring to the datasheet the index 2 is the MCKUDP. When enabled, it "Enables the automatic disable of the Master Clock of the USB Device Port when a suspend condition occurs". We fix the index to the real UDP id which "Enables the 48 MHz clock of the USB Device Port". Cc: nicolas.ferre@microchip.com Cc: ludovic.desroches@microchip.com Cc: alexandre.belloni@bootlin.com Cc: mturquette@baylibre.com Cc: sboyd@kernel.org Cc: claudiu.beznea@microchip.com Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@pengutronix.de Fixes: 02ff48e4d7f7 ("clk: at91: add at91rm9200 pmc driver") Fixes: 0e0e528d8260 ("ARM: dts: at91: rm9200: switch to new clock bindings") Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221114185923.1023249-2-m.grzeschik@pengutronix.de
2022-11-16clk: sunxi-ng: f1c100s: Add IR mod clockAndre Przywara
For some reason the mod clock for the Allwinner F1C100s CIR (infrared receiver) peripheral was not modeled in the CCU driver. Add the clock description to the list, and wire it up in the clock list. By assigning a new clock ID at the end, it extends the number of clocks. This allows to use the CIR peripheral on any F1C100s series board. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221107005433.11079-5-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-16clk: sunxi-ng: v3s: Correct the header guard of ccu-sun8i-v3s.hWei Li
Rename the header guard of ccu-sun8i-v3s.h from _CCU_SUN8I_H3_H_ to _CCU_SUN8I_V3S_H_ what corresponding with the file name. Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU") Signed-off-by: Wei Li <liwei391@huawei.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221108094335.3597008-1-liwei391@huawei.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2022-11-16clk: renesas: r8a779f0: Fix Ethernet Switch clocksGeert Uytterhoeven
The RSwitch2 and EtherTSN-IF clocks were accidentally mixed up. While at it, rename them to better match the (future) documentation. Fixes: a3b4137a4d4023e6 ("clk: renesas: r8a779f0: Add Ethernet Switch clocks") Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/99b8b41bd2c5043c9e457862ef4bc144869eca58.1668501212.git.geert+renesas@glider.be
2022-11-15clk: qcom: Add display clock controller driver for SM6375Konrad Dybcio
Add support for the display clock controller found on SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115155808.10899-2-konrad.dybcio@linaro.org
2022-11-15clk: rockchip: add clock controller for the RK3588Elaine Zhang
Add full clock controller support RK3588. [rebase, integrate fixes from Wyon and Finley, add missing frequencies to PLL lookup table, update commit message, add GATE_LINK clocks which downstream handles in its own driver with one DT node per clock] Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com> Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-10-sebastian.reichel@collabora.com [dropped module stuff after talking to Sebastian] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-15clk: samsung: Revert "clk: samsung: exynos-clkout: Use ↵Marek Szyprowski
of_device_get_match_data()" of_device_get_match_data() function should not be used on the device other than the one matched to the given driver, because it always returns the match_data of the matched driver. In case of exynos-clkout driver, the code matched the OF IDs on the PARENT device, so replacing it with of_device_get_match_data() broke the driver. This reverts commit 777aaf3d1daf793461269b49c063aca1cee06a44. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 777aaf3d1daf ("clk: samsung: exynos-clkout: Use of_device_get_match_data()") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221108213718.32076-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-11-15clk: renesas: r8a779g0: Add Z0 clock supportGeert Uytterhoeven
Add support for the Z0 (Cortex-A76 Sub-System) clock on R-Car V4H, based on the existing support for Z clocks on R-Car Gen4. Extracted from a patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/75daa1fd8fa7eaef7b8945bb5906c787222c7ac4.1668423063.git.geert+renesas@glider.be
2022-11-14clk: rockchip: add lookup table supportSebastian Reichel
Add support for mapping reset IDs to register offsets to support gapless continous platform reset IDs. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-9-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-14clk: rockchip: simplify rockchip_clk_add_lookupSebastian Reichel
rockchip_clk_add_lookup is only called from within the file, so it can be made static. The additional checks are removed with the following reasoning: 1. The data structure is initialized by rockchip_clk_init(), which is called by all rockchip platforms before the clocks are registered. Not doing so would result in an incomplete clock tree at the moment, which is a fatal error. In other parts of the kernel these kind of checks are usually omitted, so this was done here. The alternative is adding a pr_err to inform the kernel programmer adding a new platform about his incorrect code. Apart from that we are also not checking if the clock id is within the array boundings. 2. While not used so far by any rockchip platform, 0 is a valid clock identifier. To align rockchip closer to other ARM platforms we will start using it with rk3588. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-8-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-14clk: rockchip: allow additional mux options for cpu-clock frequency changesElaine Zhang
In order to improve the main frequency of CPU, the clock path of CPU is simplified as follows: |--\ | \ |--\ --apll--|\ | \ | \ | |--apll_core--| \ | \ --24M---|/ |mux1 |--[gate]--|mux2|---clk_core | / | / --gpll--|\ | / |------| / | |--gpll_core--| / | |--/ --24M---|/ |--/ | | -------apll_directly--------------| When the CPU requests high frequency, we want to use MUX2 select the "apll_directly". At low frequencies use MUX1 to select “apll_core" and then MUX2 to select "apll_core_gate". However, in this way, the CPU frequency conversion needs to be in the following order: 1. MUX2 select to "apll_core_gate", MUX1 select "gpll_core" 2. Apll sets slow_mode, sets APLL parameters, locks APLL, and then APLL sets normal_mode 3. MUX1 select "apll_core", MUX2 select "apll_directly" So add pre_mux and post_mux options to cover this special requirements. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> [rebase] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-7-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-14clk: rockchip: add pll type for RK3588Elaine Zhang
Add RK3588 PLL support fully relying on lookup tables like the other upstream supported rockchip platforms. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> [rebase and modify code to avoid PLL parameter calculation] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-6-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-14clk: rockchip: add register offset of the cores select parentElaine Zhang
The cores select parent register is special on RK3588. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221018151407.63395-5-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-09clk: qcom: Add SC8280XP display clock controllerBjorn Andersson
The Qualcomm SC8280XP platform has two display clock controller instances, add support for these. Duplication between the two implementations is reduced by reusing any constant data between the two sets of clock data. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220926203800.16771-3-quic_bjorande@quicinc.com
2022-11-08clk: meson: pll: add pcie lock retry workaroundHeiner Kallweit
The PCIe PLL locking may be unreliable under some circumstance, such as high or low temperature. If the PLL fails to lock, reset it a try again. This helps on the S905X4 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> [commit message amend] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/cc80cda0-4dda-2e3e-3fc8-afa97717479b@gmail.com
2022-11-08clk: meson: pll: adjust timeout in meson_clk_pll_wait_lock()Heiner Kallweit
Currently we loop over meson_parm_read() up to 24mln times. This results in a unpredictable timeout period. In my case it's over 5s on a S905X4-based system. Make the timeout period predictable and set it to 100ms. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/a801afc0-a8f2-a0a4-0f2b-a7201351d563@gmail.com
2022-11-08clk: renesas: r8a779g0: Add CMT clocksWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221104151135.4706-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-11-08clk: renesas: r8a779g0: Add TMU and SASYNCRT clocksWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221103205546.24836-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-11-08clk: renesas: r8a779f0: Fix SCIF parent clocksWolfram Sang
As serial communication requires a clean clock signal, the Serial Communication Interfaces with FIFO (SCIF) are clocked by a clock that is not affected by Spread Spectrum or Fractional Multiplication. Hence change the parent clocks for the SCIF modules from the S0D12_PER clock to the SASYNCPERD4 clock (which has the same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81. Fixes: 24aaff6a6ce4 ("clk: renesas: cpg-mssr: Add support for R-Car S4-8") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221103143440.46449-3-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-11-08clk: renesas: r8a779f0: Fix HSCIF parent clocksWolfram Sang
As serial communication requires a clean clock signal, the High Speed Serial Communication Interfaces with FIFO (HSCIF) are clocked by a clock that is not affected by Spread Spectrum or Fractional Multiplication. Hence change the parent clocks for the HSCIF modules from the S0D3_PER clock to the SASYNCPERD1 clock (which has the same clock rate), cfr. R-Car S4-8 Hardware User's Manual rev. 0.81. Fixes: 080bcd8d5997 ("clk: renesas: r8a779f0: Add HSCIF clocks") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221103143440.46449-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-11-07clk: qcom: ipq8074: convert to parent dataRobert Marko
Convert the IPQ8074 GCC driver to use parent data instead of global name matching. Utilize ARRAY_SIZE for num_parents instead of hardcoding the value. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030175703.1103224-1-robimarko@gmail.com
2022-11-07clk: qcom: Add support for QDU1000 and QRU1000 RPMh clocksMelody Olvera
Add support for RMPh clocks for QDU1000 and QRU1000 SoCs. Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221026190441.4002212-5-quic_molvera@quicinc.com
2022-11-05clk: qcom: dispcc-sm8250: Disable link_div_clk_src for sm8150Robert Foss
SM8150 does not have any of the link_div_clk_src clocks, so let's disable them for this SoC. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221102090140.965450-6-robert.foss@linaro.org
2022-11-05clk: qcom: dispcc-sm8250: Add missing EDP clocks for sm8350Robert Foss
SM8350 supports embedded displayport, but the clocks for this were previously not accounted for. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221102090140.965450-5-robert.foss@linaro.org
2022-11-05clk: qcom: dispcc-sm8250: Add RETAIN_FF_ENABLE flag for mdss_gdscRobert Foss
All SoC supported by this driver supports the RETAIN_FF_ENABLE flag, so it should be enabled here. This feature enables registers to maintain their state after dis/re-enabling the GDSC. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221102090140.965450-3-robert.foss@linaro.org
2022-11-05clk: qcom: dispcc-sm8250: Disable EDP_GTC for sm8350Robert Foss
SM8350 does not have the EDP_GTC clock, so let's disable it for this SoC. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221102090140.965450-2-robert.foss@linaro.org
2022-11-05clk: qcom: gcc-sm8250: Use retention mode for USB GDSCsManivannan Sadhasivam
USB controllers on SM8250 doesn't work after coming back from suspend. This can be fixed by keeping the USB GDSCs in retention mode so that hardware can keep them ON and put into rentention mode once the parent domain goes to a low power state. Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221102091320.66007-1-manivannan.sadhasivam@linaro.org
2022-11-05clk: qcom: dispcc-sm6350: Add CLK_OPS_PARENT_ENABLE to pixel&byte srcKonrad Dybcio
Add the CLK_OPS_PARENT_ENABLE flag to pixel and byte clk srcs to ensure set_rate can succeed. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Fixes: 837519775f1d ("clk: qcom: Add display clock controller driver for SM6350") Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221010155546.73884-1-konrad.dybcio@somainline.org
2022-11-05clk: qcom: gcc-sm6125: Remove gpll7 from sdcc2_appsMartin Botka
This removes gpll7 clock source from sdcc2_apps as it caused issues on the device during testing Signed-off-by: Martin Botka <martin.botka@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221001185431.493440-1-martin.botka@somainline.org
2022-11-05clk: qcom: gcc-ipq806x: use parent_data for the last remaining entryDmitry Baryshkov
Use parent_data for the last remaining entry (pll4). This clock is provided by the lcc device. Fixes: cb02866f9a74 ("clk: qcom: gcc-ipq806x: convert parent_names to parent_data") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220927113826.246241-3-dmitry.baryshkov@linaro.org
2022-11-04clk: qcom: gdsc: Remove direct runtime PM callsStephen Boyd
We shouldn't be calling runtime PM APIs from within the genpd enable/disable path for a couple reasons. First, this causes an AA lockdep splat[1] because genpd can call into genpd code again while holding the genpd lock. WARNING: possible recursive locking detected 5.19.0-rc2-lockdep+ #7 Not tainted -------------------------------------------- kworker/2:1/49 is trying to acquire lock: ffffffeea0370788 (&genpd->mlock){+.+.}-{3:3}, at: genpd_lock_mtx+0x24/0x30 but task is already holding lock: ffffffeea03710a8 (&genpd->mlock){+.+.}-{3:3}, at: genpd_lock_mtx+0x24/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&genpd->mlock); lock(&genpd->mlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/2:1/49: #0: 74ffff80811a5748 ((wq_completion)pm){+.+.}-{0:0}, at: process_one_work+0x320/0x5fc #1: ffffffc008537cf8 ((work_completion)(&genpd->power_off_work)){+.+.}-{0:0}, at: process_one_work+0x354/0x5fc #2: ffffffeea03710a8 (&genpd->mlock){+.+.}-{3:3}, at: genpd_lock_mtx+0x24/0x30 stack backtrace: CPU: 2 PID: 49 Comm: kworker/2:1 Not tainted 5.19.0-rc2-lockdep+ #7 Hardware name: Google Lazor (rev3 - 8) with KB Backlight (DT) Workqueue: pm genpd_power_off_work_fn Call trace: dump_backtrace+0x1a0/0x200 show_stack+0x24/0x30 dump_stack_lvl+0x7c/0xa0 dump_stack+0x18/0x44 __lock_acquire+0xb38/0x3634 lock_acquire+0x180/0x2d4 __mutex_lock_common+0x118/0xe30 mutex_lock_nested+0x70/0x7c genpd_lock_mtx+0x24/0x30 genpd_runtime_suspend+0x2f0/0x414 __rpm_callback+0xdc/0x1b8 rpm_callback+0x4c/0xcc rpm_suspend+0x21c/0x5f0 rpm_idle+0x17c/0x1e0 __pm_runtime_idle+0x78/0xcc gdsc_disable+0x24c/0x26c _genpd_power_off+0xd4/0x1c4 genpd_power_off+0x2d8/0x41c genpd_power_off_work_fn+0x60/0x94 process_one_work+0x398/0x5fc worker_thread+0x42c/0x6c4 kthread+0x194/0x1b4 ret_from_fork+0x10/0x20 Second, this confuses runtime PM on CoachZ for the camera devices by causing the camera clock controller's runtime PM usage_count to go negative after resuming from suspend. This is because runtime PM is being used on the clock controller while runtime PM is disabled for the device. The reason for the negative count is because a GDSC is represented as a genpd and each genpd that is attached to a device is resumed during the noirq phase of system wide suspend/resume (see the noirq suspend ops assignment in pm_genpd_init() for more details). The camera GDSCs are attached to camera devices with the 'power-domains' property in DT. Every device has runtime PM disabled in the late system suspend phase via __device_suspend_late(). Runtime PM is not usable until runtime PM is enabled in device_resume_early(). The noirq phases run after the 'late' and before the 'early' phase of suspend/resume. When the genpds are resumed in genpd_resume_noirq(), we call down into gdsc_enable() that calls pm_runtime_resume_and_get() and that returns -EACCES to indicate failure to resume because runtime PM is disabled for all devices. Upon closer inspection, calling runtime PM APIs like this in the GDSC driver doesn't make sense. It was intended to make sure the GDSC for the clock controller providing other GDSCs was enabled, specifically the MMCX GDSC for the display clk controller on SM8250 (sm8250-dispcc), so that GDSC register accesses succeeded. That will already happen because we make the 'dev->pm_domain' a parent domain of each GDSC we register in gdsc_register() via pm_genpd_add_subdomain(). When any of these GDSCs are accessed, we'll enable the parent domain (in this specific case MMCX). We also remove any getting of runtime PM during registration, because when a genpd is registered it increments the count on the parent if the genpd itself is already enabled. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Johan Hovold <johan+linaro@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Satya Priya <quic_c_skakit@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Reported-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/CAE-0n52xbZeJ66RaKwggeRB57fUAwjvxGxfFMKOKJMKVyFTe+w@mail.gmail.com [1] Fixes: 1b771839de05 ("clk: qcom: gdsc: enable optional power domain support") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20221103183030.3594899-1-swboyd@chromium.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-01clk: samsung: Fix reference to CLK_OF_DECLARE in commentJonathan Neuschäfer
It was misspelled as OF_CLK_DECLARE. Fix it. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20221031220751.158341-1-j.neuschaefer@gmx.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-01clk: Add Ingenic JZ4755 CGU driverSiarhei Volkau
Add support for the clocks provided by the CGU in the Ingenic JZ4755 SoC. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Link: https://lore.kernel.org/r/20221031183930.1338009-2-lis8215@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-11-01clk: renesas: r9a06g032: Repair grave increment errorMarek Vasut
If condition (clkspec.np != pd->dev.of_node) is true, then the driver ends up in an endless loop, forever, locking up the machine. Fixes: aad03a66f902 ("clk: renesas: r9a06g032: Add clock domain support") Reviewed-by: Ralph Siemsen <ralph.siemsen@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Gareth Williams <gareth.williams.jx@renesas.com> Link: https://lore.kernel.org/r/20221028113834.7496-1-marex@denx.de Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-10-28clk: renesas: rzg2l: Don't assume all CPG_MOD clocks support PMLad Prabhakar
There are cases where not all CPG_MOD clocks should be assumed to support PM. For example on the CRU block there is a particular sequence that needs to be followed to initialize the CSI-2 D-PHY in which individual clocks need to be turned ON/OFF, due to which Runtime PM support wasn't used by the CRU CSI-2 driver. This patch adds support to allow indicating if PM is not supported by the CPG_MOD clocks. Two new members no_pm_mod_clks and num_no_pm_mod_clks are added to struct rzg2l_cpg_info so that MOD clocks which do not support PM can be passed by no_pm_mod_clks[] array and when the driver uses Runtime PM support the clk ID is matched against the no_pm_mod_clks[] array to see if the clk is needed to be included as part of Runtime PM. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20221026014227.162121-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-10-28firmware: raspberrypi: Move the clock IDs to the firmware headerMaxime Ripard
We'll need the clock IDs in more drivers than just the clock driver from now on, so let's move them in the firmware header. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220815-rpi-fix-4k-60-v5-2-fe9e7ac8b111@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-10-27clk: qcom: Update the force mem core bit for GPU clocksTaniya Das
There are few GPU clocks which are powering up the memories and thus enable the FORCE_MEM_PERIPH always for these clocks to force the periph_on signal to remain active during halt state of the clock. Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280") Fixes: 3e0f01d6c7e7 ("clk: qcom: Add graphics clock controller driver for SC7280") Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com> Link: https://lore.kernel.org/r/1666159535-6447-1-git-send-email-quic_c_skakit@quicinc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 15:49:42 +0000