summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2019-01-28clk: sunxi: A31: Fix wrong AHB gate numberAndre Przywara
According to the manual the gate clock for MMC3 is at bit 11, and NAND1 is controlled by bit 12. Fix the gate bit definitions in the clock driver. Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-25clk: renesas: rcar-gen3: Add spinlockSergei Shtylyov
Protect the CPG register read-modify-write sequence with a spinlock. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-25clk: renesas: rcar-gen3: Factor out cpg_reg_modify()Sergei Shtylyov
There's quite often repeated sequence of a CPG register read-modify-write, so it seems worth factoring it out into a function -- this saves 68 bytes of the object code (AArch64 gcc 4.8.5) and simplifies protecting all such sequences with a spinlock in the next patch... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-25clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating itChen-Yu Tsai
The PLL-MIPI clock is somewhat special as it has its own LDOs which need to be turned on for this PLL to actually work and output a clock signal. Add the 2 LDO enable bits to the gate bits. Fixes: 5690879d93e8 ("clk: sunxi-ng: Add A23 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-24clk: nxp: Drop 'flags' on fixed_rate clk macroStephen Boyd
The flags argument here is always 0, and we want to get rid of the flags member of the clk_fixed_rate struct. So remove this here and just pass 0 when it's used. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24clk: Document __clk_mux_determine_rate()Stephen Boyd
It had some documentation, but not kerneldoc style so it wasn't getting picked up. Add some docs so scripts can pick this function out. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24clk: Document deprecated thingsStephen Boyd
We don't want driver authors to use the struct clk based registration and provider APIs. Instead, they should use the clk_hw based APIs. Add some notes in the kerneldoc to this effect. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24clk: samsung: fix typoMatteo Croce
Fix spelling mistake: "lenght" -> "length" Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24clk: qcom: gcc: Use active only source for CPUSS clocksTaniya Das
The clocks of the CPUSS such as "gcc_cpuss_ahb_clk_src" is a CRITICAL clock and needs to vote on the active only source of XO, so as to keep the vote as long as CPUSS is active. Similar rbcpr_clk_src is also has the same requirement. Signed-off-by: Taniya Das <tdas@codeaurora.org> Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24clk: imx: imx7ulp: use struct_size() in kzalloc()Gustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24clk: socfpga: Don't have get_parent for single parent opsStephen Boyd
This driver creates a gate clk with the possibility to have multiple parents. That can cause problems if the common clk framework tries to call the get_parent() op and gets back a number that's larger than the number of parents the clk says it supports in clk_init_data::num_parents. Let's duplicate the clk_ops structure each time this function is called and drop the get/set parent ops when there is only one parent. This allows the framework to consider a number larger than clk_init_data::num_parents as an error condition of the get_parent() clk op, clearing the way for proper code. Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Tested-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24clk: ti: Fix error handling in ti_clk_parse_divider_data()Dan Carpenter
The ti_clk_parse_divider_data() function is only called from _get_div_table_from_setup(). That function doesn't look at the return value but instead looks at the "*table" pointer. In this case, if the kcalloc() fails then *table is NULL (which means success). It should instead be an error pointer. The ti_clk_parse_divider_data() function has two callers. One checks for errors and the other doesn't. I have fixed it so now both handle errors. Fixes: 4f6be5655dc9 ("clk: ti: divider: add driver internal API for parsing divider data") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24clk: imx: Fix fractional clock set rate computationAbel Vesa
Before multiplying by PLL_FRAC_DENOM, the temp64 needs to be temp64 = rate * 2 - divfi * parent_rate * 8, instead of: temp64 = (rate * 2 - divfi) * parent_rate Fixes: 6209624b9a5c1e ("clk: imx: Add fractional PLL output clock") Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24clk: Remove global clk traversal on fetch parent indexDerek Basehore
It's not required to traverse the entire clk tree when the parents array contains a NULL value. We already have the parent clk_core pointer, so we can just compare the parent->name and parent_names[i] pointers. This can be a substantial power improvement in cases where the parent clk isn't known and that clk is never registered, because a mux having an unregistered parent name may traverse the clk tree on every clk_set_rate() call in clk_mux_determine_rate_flags(). This can happen hundreds of times a second for CPU clks. This patch is the combination of reverting commit 470b5e2f97cf ("clk: simplify clk_fetch_parent_index() function") and optimizing the resulting code to never call __clk_lookup() because we already have the clk_core pointer we're looking for. That optimization went unnoticed even after commit da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") tried to optimize this path. Signed-off-by: Derek Basehore <dbasehore@chromium.org> [sboyd@kernel.org: More description in commit text] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24Revert "clk: mmp2: add SP clock"Lubomir Rintel
It seems that the kernel has no business managing this clock: once the SP clock is disabled, it's not sufficient to just enable in order to bring the SP core back up. Just let the firmware keep it enabled and don't expose it to drivers. This reverts commit fc27c2394d96fd19854b7e2d3f0e60df0d86fc90. Link: https://lore.kernel.org/lkml/154783267051.169631.3197836544646625747@swboyd.mtv.corp.google.com/ Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24clk: renesas: r8a774c0: Correct parent clock of DUGeert Uytterhoeven
According to the RZ/G Series, 2nd Generation Hardware Manual Rev 0.61, the parent clock of the DU module clocks on RZ/G2E is S1D1. Fixes: 906e0a4a6d1ef2d3 ("clk: renesas: cpg-mssr: Add r8a774c0 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22clk: sunxi-ng: v3s: Fix TCON reset de-assert bitPaul Kocialkowski
According to the datasheet and the reference code from Allwinner, the bit used to de-assert the TCON reset is bit 4, not bit 3. Fix it in the V3s CCU driver. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-21clk: renesas: r8a774a1: Add missing CANFD clockFabrizio Castro
This patch adds the missing CANFD clock to the r8a774a1 specific clock driver. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-21clk: renesas: r8a774c0: Add missing CANFD clockFabrizio Castro
This patch adds the missing CANFD clock to the r8a774c0 specific clock driver. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-18clk: meson: ao-clkc: claim clock controller input clocks from DTJerome Brunet
Instead of relying on a fixed names for the differents input clocks of the controller, get them through DT. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190116175435.4990-4-jbrunet@baylibre.com
2019-01-18clk: meson: axg: claim clock controller input clock from DTJerome Brunet
Instead of relying on a fixed name for the xtal clock, claim the controller input clock trough DT. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190116175435.4990-3-jbrunet@baylibre.com
2019-01-18clk: meson: gxbb: claim clock controller input clock from DTJerome Brunet
Instead of relying on a fixed name for the xtal clock, claim the controller input clock trough DT. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190116175435.4990-2-jbrunet@baylibre.com
2019-01-15clk: socfpga: stratix10: fix naming convention for the fixed-clocksDinh Nguyen
The fixed clocks in the DTS file have a hyphen, but the clock driver has the fixed clocks using underbar. Thus the clock driver cannot detect the other fixed clocks correctly. Change the fixed clock names to a hyphen. Fixes: 07afb8db7340 ("clk: socfpga: stratix10: add clock driver for Stratix10 platform") Cc: linux-stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-11clk: socfpga: stratix10: fix rate calculation for pll clocksDinh Nguyen
The main PLL calculation has a mistake. We should be using the multiplying the VCO frequency, not the parent clock frequency. Fixes: 07afb8db7340 ("clk: socfpga: stratix10: add clock driver for Stratix10 platform") Cc: linux-stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-11clk: qcom: Select QCOM_GDSC with MSM_GCC_8998Marc Gonzalez
If QCOM_GDSC is disabled, gdsc_register() returns -ENOSYS, which causes gcc_msm8998_probe() to fail. Select QCOM_GDSC to solve the problem. gcc-msm8998: probe of 100000.clock-controller failed with error -38 Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Fixes: b5f5f525c547 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: clps711x: Remove board supportAlexander Shiyan
Since board support for the CLPS711X platform was removed, remove the board support from the clk-clps711x driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: at91: enable AUDIOPLL as source for PCKx on SAMA5D2Michał Mirosław
Datasheet for SAMA5D2x mentions 6 sources for PCKx, the last being AUDIOPLL. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: qcom: smd: Add support for MSM8998 rpm clocksJeffrey Hugo
Add rpm smd clocks, PMIC and bus clocks which are required on MSM8998 for clients to vote on. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: Add Fixed MMIO clock driverJan Kotas
This patch adds a driver for Fixed MMIO clock. The driver reads a clock frequency value from a single 32-bit memory mapped register and registers it as a fixed rate clock. It can be enabled with COMMON_CLK_FIXED_MMIO Kconfig option. Signed-off-by: Jan Kotas <jank@cadence.com> [sboyd@kernel.org: Make of_fixed_mmio_clk_setup() static, use clk_hw based APIs] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998Jeffrey Hugo
The gcc_usb3_phy_pipe_clk is generated by the phy, but is also used by the phy during init. The clock needs to be enabled during the init sequence, but may not be fully active until after the init sequence is complete. This causes a catch-22 if the clock status is checked during enable. As a result, skip the checks to avoid the troubling situation. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: qcom: Add missing freq for usb30_master_clk on 8998Jeffrey Hugo
The usb30_master_clk supports a 60Mhz frequency, but that is missing from the table of supported frequencies. Add it. Fixes: b5f5f525c547 (clk: qcom: Add MSM8998 Global Clock Control (GCC) driver) Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocksJeffrey Hugo
A branch clock is basically a clock that can be gated for power savings, but is also what devices/drivers consume. Configuring a branch clock's rate needs to be done at the source, so for all branch clocks which have a defined parent, set CLK_SET_RATE_PARENT so that clk_set_rate() calls on branch clocks can do what is expected. This is important as most drivers do not check the resulting clock rate after a successful clk_set_rate() call, thus the driver may get out of sync with the actual hardware state and weird issues might crop up. This has been observed with issues getting SDHCI to reliably support "fast" cards such as SDR104. Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support) Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: vc5: Abort clock configuration without upstream clockMarek Vasut
In case the upstream clock are not set, which can happen in case the VC5 has no valid upstream clock, the $src variable is used uninited by regmap_update_bits(). Check for this condition and return -EINVAL in such case. Note that in case the VC5 has no valid upstream clock, the VC5 can not operate correctly. That is a hardware property of the VC5. The internal oscilator present in some VC5 models is also considered upstream clock. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexey Firago <alexey_firago@mentor.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-renesas-soc@vger.kernel.org [sboyd@kernel.org: Added comment about probe preventing this from happening in the first place] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: sysfs: fix invalid JSON in clk_dumpLubomir Rintel
Add a missing comma so that the output is valid JSON format again. Fixes: 9fba738a53dd ("clk: add duty cycle support") Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: imx: Remove Kconfig duplicate includeAbel Vesa
Commit d360b130e210f2 ("clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant") introduced this duplicate and incorrectly ordered kconfig include. Fixes: d360b130e210f2 ("clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant") Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: zynqmp: Fix memory allocation in zynqmp_clk_setupGustavo A. R. Silva
Fix memory allocation and use struct_size() in kzalloc(). This also fixes the allocation size to be correct, and smaller, because before we were allocating a bunch of sizeof(struct clk_hw_onecell_data) structures for each struct clk_hw we needed. Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Michal Simek <michal.simek@xilinx.com> [sboyd@kernel.org: Expand commit text] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: tegra: dfll: Fix a potential Oop in remove()Dan Carpenter
If tegra_dfll_unregister() fails then "soc" is an error pointer. We should just return instead of dereferencing it. Fixes: 1752c9ee23fb ("clk: tegra: dfll: Fix drvdata overwriting issue") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-09clk: imx: fix potential NULL dereference in imx8qxp_lpcg_clk_probe()Wei Yongjun
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 1e3121bfe51a ("clk: imx: add imx8qxp lpcg driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-07clk: meson: meson8b: add the GPU clock treeMartin Blumenstingl
Add the GPU clock tree on Meson8, Meson8b and Meson8m2. The GPU clock tree on Meson8b and Meson8m2 is almost identical to the one one GXBB: - there's a glitch-free mux at HHI_MALI_CLK_CNTL[31] - there are two identical parents for this mux: mali_0 and mali_1, each with a gate, divider and mux - the parents of mali_0_sel and mali_1_sel are identical to GXBB except there's no GP0_PLL on these 32-bit SoCs Meson8 is different because it does not have the glitch-free mux. Instead if only has the mali_0 clock tree. The parents of mali_0_sel are identical to the ones on Meson8b and Meson8m2. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181208171247.22238-4-martin.blumenstingl@googlemail.com
2019-01-07clk: meson: meson8b: use a separate clock table for Meson8Martin Blumenstingl
The Meson8 SoC is slightly different compared to Meson8b and Meson8m2 because it does not have the glitch-free Mali GPU clock mux. For Meson8b and Meson8m2 there are currently no known differences. Add a separate clk_hw_onecell_data table for Meson8 so these differences can be implemented. For now meson8_hw_onecell_data is a clone of our existing meson8b_hw_onecell_data. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181208171247.22238-3-martin.blumenstingl@googlemail.com
2019-01-07clk: meson: axg-ao: add 32k generation subtreeJerome Brunet
Add the clock subtree generating the 32k clock in amlogic axg ao block. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181221160239.26265-6-jbrunet@baylibre.com
2019-01-07clk: meson: gxbb-ao: replace cec-32k with the dual dividerJerome Brunet
Replace the cec-32k clock of gxbb-ao with the simpler dual divider driver. The dual divider implements only the dividing part. All the other bits are now exposed using simple elements, such as gates and muxes Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181221160239.26265-5-jbrunet@baylibre.com
2019-01-07clk: meson: add dual divider clock driverJerome Brunet
Add the dual divider driver. This special divider make a weighted average between 2 dividers to reach fractional divider values. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181221160239.26265-4-jbrunet@baylibre.com
2019-01-07clk: meson: clean-up clock registrationJerome Brunet
Order, ids and size between the table of regmap clocks and the onecell data table could be different. Set regmap pointer in all the regmap clocks before starting the registration using the onecell data, to make sure we don't get into an incoherent situation. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181221160239.26265-3-jbrunet@baylibre.com
2019-01-07clk: rockchip: add CLK_SET_RATE_PARENT for rk3066 lcdc dclksFinley Xiao
Add CLK_SET_RATE_PARENT for both rk3066 lcdc dclk. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-01-07clk: rockchip: fix frac settings of GPLL clock for rk3328Katsuhiro Suzuki
This patch fixes settings of GPLL frequency in fractional mode for rk3328. In this mode, FOUTVCO is calcurated by following formula: FOUTVCO = FREF * FBDIV / REFDIV + ((FREF * FRAC / REFDIV) >> 24) The problem is in FREF * FRAC >> 24 term. This result always lacks one from target value is specified by rate member. For example first itme of rk3328_pll_frac_rate originally has - rate : 1016064000 - refdiv: 3 - fbdiv : 127 - frac : 134217 - FREF * FBDIV / REFDIV = 1016000000 - (FREF * FRAC / REFDIV) >> 24 = 63999 Thus calculated rate is 1016063999. It seems wrong. If frac has 134218 (it is increased 1 from original value), second term is 64000. All other items have same situation. So this patch adds 1 to frac member in all items of rk3328_pll_frac_rate. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Acked-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-01-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A tiny pull request this merge window unfortunately, should get more material in for the next release: - new driver for Raspberry Pi's touchscreen (firmware interface) - miscellaneous input driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G Input: atmel_mxt_ts - don't try to free unallocated kernel memory Input: drv2667 - fix indentation issues Input: touchscreen - fix coding style issue Input: add official Raspberry Pi's touchscreen driver Input: nomadik-ske-keypad - fix a loop timeout test Input: rotary-encoder - don't log EPROBE_DEFER to kernel log Input: olpc_apsp - remove set but not used variable 'np' Input: olpc_apsp - enable the SP clock Input: olpc_apsp - check FIFO status on open(), not probe() Input: olpc_apsp - drop CONFIG_OLPC dependency clk: mmp2: add SP clock dt-bindings: marvell,mmp2: Add clock id for the SP clock Input: ad7879 - drop platform data support
2018-12-28clk: dove: fix refcount leak in dove_clk_init()Yangtao Li
The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Fixes: 8f7fc5450b64 ("clk: mvebu: dove: maintain clock init order") Fixes: 63b8d92c793f ("clk: add Dove PLL divider support for GPU, VMeta and AXI clocks") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-28clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init()Yangtao Li
The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Fixes: 337072604224 ("clk: mvebu: Expand mv98dx3236-core-clock support") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-28clk: armada-xp: fix refcount leak in axp_clk_init()Yangtao Li
The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Fixes: 0a11a6ae9437 ("clk: mvebu: armada-xp: maintain clock init order") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 22:13:20 +0000