summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2019-03-08Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and ↵Stephen Boyd
'clk-SA-fixes' into clk-next - Updates for qcom MSM8998 GCC clks - qcom MSM8998 RPM managed clks - Random static analysis fixes for clk drivers * clk-qcom-msm8998: clk: qcom: Make common clk_hw registrations clk: qcom: smd: Add support for MSM8998 rpm clocks clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998 clk: qcom: Add missing freq for usb30_master_clk on 8998 clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks * clk-fractional-parent: clk: fractional-divider: check parent rate only if flag is set * clk-x86-mv: clk: x86: Move clk-lpss.h to platform_data/x86 * clk-SA-fixes: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings clk: qoriq: Improve an error message
2019-03-08Merge branches 'clk-qcom-rpmh', 'clk-gpio-sleep', 'clk-stm32mp1', ↵Stephen Boyd
'clk-qcom-qcs404' and 'clk-actions-s500' into clk-next - IPA clk support on Qualcomm RPMh clk controllers - Support sleeping gpios in clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Actions Semi S500 SoC clk support * clk-qcom-rpmh: clk: qcom: clk-rpmh: Add IPA clock support * clk-gpio-sleep: clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clk * clk-stm32mp1: dt-bindings: clock: remove unused definition for stm32mp1 clk: stm32mp1: fix bit width of hse_rtc divider clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flag clk: stm32mp1: fix HSI divider flag clk: stm32mp1: fix mcu divider table clk: stm32mp1: set ck_csi as critical clock clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks clk: stm32mp1: parent clocks update * clk-qcom-qcs404: clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs clk: qcom: remove empty lines in clk-rcg.h * clk-actions-s500: clk: actions: Add clock driver for S500 SoC dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU clk: actions: Add configurable PLL delay
2019-03-08Merge branches 'clk-imx', 'clk-samsung', 'clk-ti', 'clk-uniphier-gear' and ↵Stephen Boyd
'clk-mmp2-lcdc' into clk-next - Split LCDC into two clks on the Marvell MMP2 SoC * clk-imx: clk: imx8mq: add GPIO clocks to clock tree clk: imx: Refactor entire sccg pll clk clk: imx: scu: add cpu frequency scaling support clk: imx: imx8mm: Mark init function __init clk: imx8mq: Add the missing ARM clock dt-bindings: imx8mq-clock: Add the missing ARM clock clk: imx: imx8mq: Fix the rate propagation for arm pll clk: imx8mq: Add support for the CLKO1 clock clk: imx8mq: Fix the CLKO2 source select list clk: imx8mq: Add missing M4 clocks clk: imx: Add clock driver support for imx8mm dt-bindings: imx: Add clock binding doc for imx8mm clk: imx: Add PLLs driver for imx8mm soc clk: imx5: add imx5_SCC2_IPG_GATE clk: imx: scu: add set parent support clk: imx: scu: add fallback compatible string support clk: imx8mq: Make parent names arrays const pointers clk: imx: Make parents const pointer in mux wrappers clk: imx: Make parent_names const pointer in composite-8m * clk-samsung: clk: samsung: s3c2443: Mark expected switch fall-through clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure clk: samsung: exynos5433: Add selected IMEM clocks clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU clk: samsung: exynos5433: Fix name typo in sssx clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs * clk-ti: clk: clk-twl6040: Fix imprecise external abort for pdmclk ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that clk: ti: check clock type before doing autoidle ops clk: ti: add a usecount for autoidle clk: ti: generalize the init sequence of clk_hw_omap clocks clk: ti: remove usage of CLK_IS_BASIC clk: ti: add new API for checking if a provided clock is an OMAP clock clk: ti: move clk_hw_omap list handling under generic part of the driver * clk-uniphier-gear: clk: uniphier: Fix update register for CPU-gear * clk-mmp2-lcdc: clk: mmp2: separate LCDC peripheral clk form the display clock dt-bindings: marvell,mmp2: Add clock id for the LCDC clock
2019-03-08Merge branches 'clk-optional', 'clk-devm-clkdev-register', 'clk-allwinner', ↵Stephen Boyd
'clk-meson' and 'clk-renesas' into clk-next - Add a {devm_}clk_get_optional() API - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups * clk-optional: clk: Add (devm_)clk_get_optional() functions clk: Add comment about __of_clk_get_by_name() error values * clk-devm-clkdev-register: clk: clk-st: avoid clkdev lookup leak at remove clk: clk-max77686: Clean clkdev lookup leak and use devm clkdev: add managed clkdev lookup registration * clk-allwinner: clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it * clk-meson: (22 commits) clk: meson: meson8b: fix the naming of the APB clocks dt-bindings: clock: meson8b: add APB clock definition clk: meson: Add G12A AO Clock + Reset Controller dt-bindings: clk: add G12A AO Clock and Reset Bindings clk: meson: factorise meson64 peripheral clock controller drivers clk: meson: g12a: add peripheral clock controller dt-bindings: clk: meson: add g12a periph clock controller bindings clk: meson: pll: update driver for the g12a clk: meson: rework and clean drivers dependencies clk: meson: axg-audio does not require syscon clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory clk: export some clk_hw function symbols for module drivers clk: meson: ao-clkc: claim clock controller input clocks from DT clk: meson: axg: claim clock controller input clock from DT clk: meson: gxbb: claim clock controller input clock from DT clk: meson: meson8b: add the GPU clock tree clk: meson: meson8b: use a separate clock table for Meson8 clk: meson: axg-ao: add 32k generation subtree clk: meson: gxbb-ao: replace cec-32k with the dual divider clk: meson: add dual divider clock driver ... * clk-renesas: clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Add TMU clock clk: renesas: r8a77980: Add RPC clocks clk: renesas: rcar-gen3: Add RPC clocks clk: renesas: rcar-gen3: Add spinlock clk: renesas: rcar-gen3: Factor out cpg_reg_modify() clk: renesas: r8a774c0: Correct parent clock of DU clk: renesas: r8a774a1: Add missing CANFD clock clk: renesas: r8a774c0: Add missing CANFD clock
2019-03-08Merge branches 'clk-of-refcount', 'clk-mmio-fixed-clock', 'clk-remove-clps', ↵Stephen Boyd
'clk-socfpga-parent' and 'clk-struct-size' into clk-next - Various DT of_node refcount fixes - Support for fixed rate clks populated from an MMIO register - Remove clps711x driver as the board support is gone * clk-of-refcount: clk: dove: fix refcount leak in dove_clk_init() clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init() clk: armada-xp: fix refcount leak in axp_clk_init() clk: kirkwood: fix refcount leak in kirkwood_clk_init() clk: armada-370: fix refcount leak in a370_clk_init() clk: vf610: fix refcount leak in vf610_clocks_init() clk: imx7d: fix refcount leak in imx7d_clocks_init() clk: imx6sx: fix refcount leak in imx6sx_clocks_init() clk: imx6q: fix refcount leak in imx6q_clocks_init() clk: samsung: exynos4: fix refcount leak in exynos4_get_xom() clk: socfpga: fix refcount leak clk: ti: fix refcount leak in ti_dt_clocks_register() clk: qoriq: fix refcount leak in clockgen_init() clk: highbank: fix refcount leak in hb_clk_init() * clk-mmio-fixed-clock: clk: Add Fixed MMIO clock driver dt-bindings: clk: Add bindings for Fixed MMIO clock * clk-remove-clps: clk: clps711x: Remove board support * clk-socfpga-parent: clk: socfpga: Don't have get_parent for single parent ops * clk-struct-size: clk: imx: imx7ulp: use struct_size() in kzalloc()
2019-02-28clk: imx8mq: add GPIO clocks to clock treeAnson Huang
i.MX8MQ has clock gate for each GPIO bank, add them into clock tree for GPIO driver to manage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: imx: Refactor entire sccg pll clkAbel Vesa
Make the entire combination of plls to be one single clock. The parents used for bypasses are specified each as an index in the parents list. The determine_rate does a lookup throughout all the possible combinations for all the divs and returns the best possible 'setup' which in turn is used by set_rate later to set up all the divs and bypasses. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Tested-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-26clk: imx: scu: add cpu frequency scaling supportAnson Huang
On NXP's i.MX SoCs with system controller inside, CPU frequency scaling can ONLY be done by system controller firmware, and it can ONLY be requested from secure mode, so Linux kernel has to call ARM SMC to trap to ARM-Trusted-Firmware to request system controller firmware to do CPU frequency scaling. This patch adds i.MX system controller CPU frequency scaling support, it reuses cpufreq-dt driver and implement the CPU frequency scaling inside SCU clock driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-25clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLKFabrizio Castro
Enum LAST_DT_CORE_CLK needs updating as R8A774A1_CLK_CANFD was recently added and it's the core clock with the highest index. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Fixes: 9d034e151b40 ("clk: renesas: r8a774a1: Add missing CANFD clock") Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: mediatek: fix platform_no_drv_owner.cocci warningsYueHaibing
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: tegra: dfll: Fix debugfs_simple_attr.cocci warningsYueHaibing
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: qoriq: Improve an error messageDan Carpenter
We intended to print "ret" but there is a copy and paste bug from the previous error message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: x86: Move clk-lpss.h to platform_data/x86Andy Shevchenko
clk-lpss.h is solely x86 related header. Move it to correct folder. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: fractional-divider: check parent rate only if flag is setKatsuhiro Suzuki
Custom approximation of fractional-divider may not need parent clock rate checking. For example Rockchip SoCs work fine using grand parent clock rate even if target rate is greater than parent. This patch checks parent clock rate only if CLK_SET_RATE_PARENT flag is set. For detailed example, clock tree of Rockchip I2S audio hardware. - Clock rate of CPLL is 1.2GHz, GPLL is 491.52MHz. - i2s1_div is integer divider can divide N (N is 1~128). Input clock is CPLL or GPLL. Initial divider value is N = 1. Ex) PLL = CPLL, N = 10, i2s1_div output rate is CPLL / 10 = 1.2GHz / 10 = 120MHz - i2s1_frac is fractional divider can divide input to x/y, x and y are 16bit integer. CPLL --> | selector | ---> i2s1_div -+--> | selector | --> I2S1 MCLK GPLL --> | | ,--------------' | | `--> i2s1_frac ---> | | Clock mux system try to choose suitable one from i2s1_div and i2s1_frac for master clock (MCLK) of I2S1. Bad scenario as follows: - Try to set MCLK to 8.192MHz (32kHz audio replay) Candidate setting is - i2s1_div: GPLL / 60 = 8.192MHz i2s1_div candidate is exactly same as target clock rate, so mux choose this clock source. i2s1_div output rate is changed 491.52MHz -> 8.192MHz - After that try to set to 11.2896MHz (44.1kHz audio replay) Candidate settings are - i2s1_div : CPLL / 107 = 11.214945MHz - i2s1_frac: i2s1_div = 8.192MHz This is because clk_fd_round_rate() thinks target rate (11.2896MHz) is higher than parent rate (i2s1_div = 8.192MHz) and returns parent clock rate. Above is current upstreamed behavior. Clock mux system choose i2s1_div, but this clock rate is not acceptable for I2S driver, so users cannot replay audio. Expected behavior is: - Try to set master clock to 11.2896MHz (44.1kHz audio replay) Candidate settings are - i2s1_div : CPLL / 107 = 11.214945MHz - i2s1_frac: i2s1_div * 147/6400 = 11.2896MHz Change i2s1_div to GPLL / 1 = 491.52MHz at same time. If apply this commit, clk_fd_round_rate() calls custom approximate function of Rockchip even if target rate is higher than parent. Custom function changes both grand parent (i2s1_div) and parent (i2s_frac) settings at same time. Clock mux system can choose i2s1_frac and audio works fine. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Reviewed-by: Heiko Stuebner <heiko@sntech.de> [sboyd@kernel.org: Make function into a macro instead] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: qcom: Make common clk_hw registrationsJeffrey Hugo
Several clock controller drivers define a list of clk_hw devices, and then register those devices in probe() before using common code to process the rest of initialization. Extend the common code to accept a list of clk_hw devices to process, thus eliminating many duplicate implementations. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Suggested-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Tested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22clk: actions: Add clock driver for S500 SoCManivannan Sadhasivam
Add common clock driver for Actions Semi S500 SoC. Signed-off-by: Edgar Bernardi Righi <edgar.righi@lsitec.org.br> [Mani: cleaned up the driver] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: actions: Add configurable PLL delayManivannan Sadhasivam
S500 SoC requires configurable delay for different PLLs. Hence, add a separate macro for declaring a PLL with configurable delay and also modify the existing OWL_PLL_NO_PARENT macro to use default delay so that no need to modify the existing S700/S900 drivers. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: imx8mm: Mark init function __initStephen Boyd
It calls another __init marked function and thus causes a section mismatch if we don't mark it this way. Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clockTaniya Das
The CFG/M/N/D registers are at an offset of 0x20 from the CMD register only for blsp1_uart3 clock, so add it for uart3 only. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Anu Ramanathan <anur@codeaurora.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: qcom: clk-rcg2: Introduce a cfg offset for RCGsTaniya Das
The RCG CFG/M/N/D register base could be at a different offset than the CMD register, so introduce a cfg_offset to identify the offset with respect to the CMD RCGR register. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Anu Ramanathan <anur@codeaurora.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: qcom: remove empty lines in clk-rcg.hVinod Koul
Remove the redundant empty lines crept in. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: stm32mp1: fix bit width of hse_rtc dividerGabriel Fernandez
Fix the bit width of the hse rtc divider because it's off by one. Fixes: 2c87c9d33117 ("clk: stm32mp1: add RTC clock") Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flagGabriel Fernandez
The divisor of ethptp_k and ck_hse_rtc clocks is: 'value register plus one'. Then CLK_DIVIDER_ALLOW_ZERO flag has no effect and is useless here. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: stm32mp1: fix HSI divider flagGabriel Fernandez
The divider of HSI (clk-hsi-div) is power of two divider. Fixes: 9bee94e7b7da ("clk: stm32mp1: Introduce STM32MP1 clock driver") Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: stm32mp1: fix mcu divider tableGabriel Fernandez
index 8: ck_mcu is divided by 256 (not 512) Fixes: e51d297e9a92 ("clk: stm32mp1: add Sub System clocks") Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: stm32mp1: set ck_csi as critical clockGabriel Fernandez
ck_csi is used for IO compensation so it should be considered as "always-on" and kept on. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocksGabriel Fernandez
STM32MP1 clock IP offers lots of Kernel clocks that are shared by multiple IP's at the same time. Then boot loader applies a clock tree that allows to use all IP's at same time and with the maximum of performance. Not change parents on a change rate on kernel clocks ensures the integrity of the system. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: stm32mp1: parent clocks updateGabriel Fernandez
Fixes parent clock for axi, fdcan, sai and adc12 clocks. Fixes: e51d297e9a92 ("clk: stm32mp1: add Sub System clocks") Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: clk-twl6040: Fix imprecise external abort for pdmclkTony Lindgren
I noticed that modprobe clk-twl6040 can fail after a cold boot with: abe_cm:clk:0010:0: failed to enable ... Unhandled fault: imprecise external abort (0x1406) at 0xbe896b20 WARNING: CPU: 1 PID: 29 at drivers/clk/clk.c:828 clk_core_disable_lock+0x18/0x24 ... (clk_core_disable_lock) from [<c0123534>] (_disable_clocks+0x18/0x90) (_disable_clocks) from [<c0124040>] (_idle+0x17c/0x244) (_idle) from [<c0125ad4>] (omap_hwmod_idle+0x24/0x44) (omap_hwmod_idle) from [<c053a038>] (sysc_runtime_suspend+0x48/0x108) (sysc_runtime_suspend) from [<c06084c4>] (__rpm_callback+0x144/0x1d8) (__rpm_callback) from [<c0608578>] (rpm_callback+0x20/0x80) (rpm_callback) from [<c0607034>] (rpm_suspend+0x120/0x694) (rpm_suspend) from [<c0607a78>] (__pm_runtime_idle+0x60/0x84) (__pm_runtime_idle) from [<c053aaf0>] (sysc_probe+0x874/0xf2c) (sysc_probe) from [<c05fecd4>] (platform_drv_probe+0x48/0x98) After searching around for a similar issue, I came across an earlier fix that never got merged upstream in the Android tree for glass-omap-xrr02. There is patch "MFD: twl6040-codec: Implement PDMCLK cold temp errata" by Misael Lopez Cruz <misael.lopez@ti.com>. Based on my observations, this fix is also needed when cold booting devices, and not just for deeper idle modes. Since we now have a clock driver for pdmclk, let's fix the issue in twl6040_pdmclk_prepare(). Cc: Misael Lopez Cruz <misael.lopez@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clkThomas Petazzoni
The current implementation of gpio-gate-clk enables/disables the clock using the GPIO in the ->enable() and ->disable() clock callbacks. This requires the GPIO to be configurable in atomic contexts. While it is the case for most memory-mapped GPIO controllers, it is not the case for GPIO expanders on I2C or SPI. This commit extends the gpio-gate-clk to check whether the GPIO calls require sleeping or not. If sleeping is not required, the current implementation based on ->enable()/->disable() is kept. However, if sleeping is needed, we instead implement the logic in the ->prepare() and ->unprepare() hooks. Thanks to this, a gate clock connected to a GPIO on a GPIO expander can be controlled with the existing driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [sboyd@kernel.org: Mark clk ops static] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: qcom: clk-rpmh: Add IPA clock supportDavid Dai
The clk-rpmh driver only supports on and off RPMh clock resources. Let's extend the driver by adding support for clocks that are managed by a different type of RPMh resource known as Bus Clock Manager(BCM). The BCM is a configurable shared resource aggregator that scales performance based on a set of frequency points. The Qualcomm IP Accelerator (IPA) clock is an example of a resource that is managed by the BCM and this a requirement from the IPA driver in order to scale its core clock. Signed-off-by: David Dai <daidavid1@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: mmp2: separate LCDC peripheral clk form the display clockLubomir Rintel
These are in fact two clocks, they shouldn't be exposed as one. One is required for accessing LCD controller registers (peripheral clock), while other (AXI clock) can be optionally used as a pixel clock source for the panel. LCDC can alternatively use different clocks than the Display 1 AXI clock for generating the pixel clock: the second AXI clock (fixed in this commit too), the HDMI PLL, or the AXI bus clock. They should really be controlled independently. Link: https://lists.freedesktop.org/archives/dri-devel/2019-January/203975.html Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: uniphier: Fix update register for CPU-gearKunihiko Hayashi
Need to set the update bit in UNIPHIER_CLK_CPUGEAR_UPD to update the CPU-gear value. Fixes: d08f1f0d596c ("clk: uniphier: add CPU-gear change (cpufreq) support") Cc: linux-stable@vger.kernel.org Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: samsung: s3c2443: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/clk/samsung/clk-s3c2443.c: In function ‘s3c2443_common_clk_init’: drivers/clk/samsung/clk-s3c2443.c:390:3: warning: this statement may fall through [-Wimplicit-fallthrough=] samsung_clk_register_alias(ctx, s3c2450_aliases, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ARRAY_SIZE(s3c2450_aliases)); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/clk/samsung/clk-s3c2443.c:393:2: note: here case S3C2416: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: samsung: exynos5: Fix kfree() of const memory on setting driver_overrideKrzysztof Kozlowski
Platform driver driver_override field should not be initialized from const memory because the core later kfree() it. If driver_override is manually set later through sysfs, kfree() of old value leads to: $ echo "new_value" > /sys/bus/platform/drivers/.../driver_override kernel BUG at ../mm/slub.c:3960! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM ... (kfree) from [<c058e8c0>] (platform_set_driver_override+0x84/0xac) (platform_set_driver_override) from [<c058e908>] (driver_override_store+0x20/0x34) (driver_override_store) from [<c031f778>] (kernfs_fop_write+0x100/0x1dc) (kernfs_fop_write) from [<c0296de8>] (__vfs_write+0x2c/0x17c) (__vfs_write) from [<c02970c4>] (vfs_write+0xa4/0x188) (vfs_write) from [<c02972e8>] (ksys_write+0x4c/0xac) (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) The clk-exynos5-subcmu driver uses override only for the purpose of creating meaningful names for children devices (matching names of power domains, e.g. DISP, MFC). The driver_override was not developed for this purpose so just switch to default names of devices to fix the issue. Fixes: b06a532bf1fa ("clk: samsung: Add Exynos5 sub-CMU clock driver") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: samsung: exynos5: Fix possible NULL pointer exception on ↵Krzysztof Kozlowski
platform_device_alloc() failure During initialization of subdevices if platform_device_alloc() failed, returned NULL pointer will be later dereferenced. Add proper error paths to exynos5_clk_register_subcmu(). The return value of this function is still ignored because at this stage of init there is nothing we can do. Fixes: b06a532bf1fa ("clk: samsung: Add Exynos5 sub-CMU clock driver") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLKFabrizio Castro
Enum LAST_DT_CORE_CLK needs updating as R8A774C0_CLK_CANFD was recently added and it's the core clock with the highest index. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Fixes: 2a6efbc6da5d248c ("clk: renesas: r8a774c0: Add missing CANFD clock") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx8mq: Add the missing ARM clockAbel Vesa
Add the ARM clock as imx_clk_cpu type. Will be used by cpufreq. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: imx8mq: Fix the rate propagation for arm pllAbel Vesa
The arm pll bypass needs to propagate the rate upwards in order for the cpufreq to work. Fixes: b80522040cd3f ("clk: imx: Add clock driver for i.MX8MQ CCM") Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx8mq: Add support for the CLKO1 clockFabio Estevam
Add the entry for the CLKO1 clock. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx8mq: Fix the CLKO2 source select listFabio Estevam
The CLKO2 clock source select list is the following as per the i.MX8M Reference Manual: 000 - 25M_REF_CLK 001 - SYSTEM_PLL2_DIV5 010 - SYSTEM_PLL1_DIV2 011 - SYSTEM_PLL2_DIV6 100 - SYSTEM_PLL3_CLK 101 - AUDIO_PLL1_CLK 110 - VIDEO_PLL1_CLK 111 - 32K_REF_CLK However, in imx8mq_clko2_sels[] only the first four entries are correct. Fix it by adding the missing "sys3_pll2_out" entry in order to match the description from the manual. Fixes: b80522040cd3f ("clk: imx: Add clock driver for i.MX8MQ CCM") Reported-by: Rogerio Pimentel <rogerio.silva@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx8mq: Add missing M4 clocksCarlo Caione
The clocks list is missing the clocks for the M4 core. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: Add clock driver support for imx8mmBai Ping
Add clock driver support for i.MX8MM SOC. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: Add PLLs driver for imx8mm socBai Ping
New PLLs are introduced on i.MX8M Mini SOC. PLL1416X is Integer PLL, PLL1443X is a Frac PLL. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx5: add imx5_SCC2_IPG_GATEMichael Grzeschik
This adds the missing clock for the SCC2 peripheral unit. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: scu: add set parent supportAisheng Dong
Add clk scu set parents support. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> [sboyd@kernel.org: Remove le32_to_cpu() on get_parent op] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: scu: add fallback compatible string supportAisheng Dong
SCU clock can be used in a similar way by IMX8QXP and IMX8QM SoCs. Make the driver support "fsl,scu-clk" fallback compatible string to allow other SoCs to reuse the common part. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx8mq: Make parent names arrays const pointersAbel Vesa
The arrays containing the mux selectors need to be of const pointer to const char. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: Make parents const pointer in mux wrappersAbel Vesa
The parents needs to be pointer to const pointer to const char. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: imx: Make parent_names const pointer in composite-8mAbel Vesa
The parent_names needs to be pointer to const pointer to const char. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-09 18:00:05 +0000