| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"This round of updates contains a fair amount of new device support, a
couple of fixes and some refactoring. The most notable additions
include new drivers for Loongson's Security Engine, RNG and TPM, new
drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a
refactoring to use a more modern GPIO API for the VEXPRESS sysreg
driver, the removal of a deprecated IRQ ACK function from the MC13xxx
RTC driver and a new DT binding for the aforementioned TI BQ257xx
charger.
New Support & Features:
- Add a suite of drivers for the Loongson Security Engine, including
the core controller, a Random Number Generator (RNG) and Trusted
Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including
the input driver, MFD cell registration, and a system power-off
handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs,
including the core MFD driver and a power supply driver for the
charger functionality.
Improvements & Fixes:
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS
sysreg driver to prevent potential silent failures.
Cleanups & Refactoring:
- Add a MAINTAINERS entry for the new Loongson Security Engine
drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO
chip API.
Removals:
- Remove the deprecated and unused mc13xxx_irq_ack() function from
the MC13xxx RTC, input and touchscreen drivers.
Device Tree Bindings Updates:
- Add device tree bindings for the TI BQ25703A charger"
* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
dt-bindings: watchdog: Add SMARC-sAM67 support
dt-bindings: mfd: tps6594: Allow gpio-line-names
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
mfd: 88pm886: Add GPADC cell
mfd: vexpress-sysreg: Use more common syntax for compound literals
mfd: rz-mtu3: Fix MTU5 NFCR register offset
mfd: max77705: Setup the core driver as an interrupt controller
mfd: cs42l43: Remove IRQ masking in suspend
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
mfd: bd71828, bd71815: Prepare for power-supply support
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
mfd: macsmc: Add "apple,t8103-smc" compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV and apic updates from Borislav Petkov:
- Add functionality to provide runtime firmware updates for the non-x86
parts of an AMD platform like the security processor (ASP) firmware,
modules etc, for example. The intent being that these updates are
interim, live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor
generating unexpected interrupts and injecting them into such guest,
thus interfering with its operation in an unexpected and negative
manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory.
The problem was that the toolchain-generated version of the code was
being executed from a different mapping of memory than what was
"assumed" during code generation, needing an ever-growing pile of
fixups for absolute memory references which are invalid in the early,
1:1 memory mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this [1]
- The usual cleanups and fixes
Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1]
* tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
x86/boot: Drop erroneous __init annotation from early_set_pages_state()
crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver
crypto: ccp - Add new HV-Fixed page allocation/free API
x86/sev: Add new dump_rmp parameter to snp_leak_pages() API
x86/startup/sev: Document the CPUID flow in the boot #VC handler
objtool: Ignore __pi___cfi_ prefixed symbols
x86/sev: Zap snp_abort()
x86/apic/savic: Do not use snp_abort()
x86/boot: Get rid of the .head.text section
x86/boot: Move startup code out of __head section
efistub/x86: Remap inittext read-execute when needed
x86/boot: Create a confined code area for startup code
x86/kbuild: Incorporate boot/startup/ via Kbuild makefile
x86/boot: Revert "Reject absolute references in .head.text"
x86/boot: Check startup code for absence of absolute relocations
objtool: Add action to check for absence of absolute relocations
x86/sev: Export startup routines for later use
x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object
x86/sev: Provide PIC aliases for SEV related data objects
x86/boot: Provide PIC aliases for 5-level paging related constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add a RISC-V optimized implementation of Poly1305. This code was
written by Andy Polyakov and contributed by Zhihang Shao.
- Migrate the MD5 code into lib/crypto/, and add KUnit tests for MD5.
Yes, it's still the 90s, and several kernel subsystems are still
using MD5 for legacy use cases. As long as that remains the case,
it's helpful to clean it up in the same way as I've been doing for
other algorithms.
Later, I plan to convert most of these users of MD5 to use the new
MD5 library API instead of the generic crypto API.
- Simplify the organization of the ChaCha, Poly1305, BLAKE2s, and
Curve25519 code.
Consolidate these into one module per algorithm, and centralize the
configuration and build process. This is the same reorganization that
has already been successful for SHA-1 and SHA-2.
- Remove the unused crypto_kpp API for Curve25519.
- Migrate the BLAKE2s and Curve25519 self-tests to KUnit.
- Always enable the architecture-optimized BLAKE2s code.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (38 commits)
crypto: md5 - Implement export_core() and import_core()
wireguard: kconfig: simplify crypto kconfig selections
lib/crypto: tests: Enable Curve25519 test when CRYPTO_SELFTESTS
lib/crypto: curve25519: Consolidate into single module
lib/crypto: curve25519: Move a couple functions out-of-line
lib/crypto: tests: Add Curve25519 benchmark
lib/crypto: tests: Migrate Curve25519 self-test to KUnit
crypto: curve25519 - Remove unused kpp support
crypto: testmgr - Remove curve25519 kpp tests
crypto: x86/curve25519 - Remove unused kpp support
crypto: powerpc/curve25519 - Remove unused kpp support
crypto: arm/curve25519 - Remove unused kpp support
crypto: hisilicon/hpre - Remove unused curve25519 kpp support
lib/crypto: tests: Add KUnit tests for BLAKE2s
lib/crypto: blake2s: Consolidate into single C translation unit
lib/crypto: blake2s: Move generic code into blake2s.c
lib/crypto: blake2s: Always enable arch-optimized BLAKE2s code
lib/crypto: blake2s: Remove obsolete self-test
lib/crypto: x86/blake2s: Reduce size of BLAKE2S_SIGMA2
lib/crypto: chacha: Consolidate into single module
...
|
|
AMD Seamless Firmware Servicing (SFS) is a secure method to allow
non-persistent updates to running firmware and settings without
requiring BIOS reflash and/or system reset.
SFS does not address anything that runs on the x86 processors and
it can be used to update ASP firmware, modules, register settings
and update firmware for other microprocessors like TMPM, etc.
SFS driver support adds ioctl support to communicate the SFS
commands to the ASP/PSP by using the TEE mailbox interface.
The Seamless Firmware Servicing (SFS) driver is added as a
PSP sub-device.
For detailed information, please look at the SFS specifications:
https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/specifications/58604.pdf
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/cover.1758057691.git.ashish.kalra@amd.com
|
|
When SEV-SNP is active, the TEE extended command header page and all output
buffers for TEE extended commands (such as used by Seamless Firmware servicing
support) must be in hypervisor-fixed state, assigned to the hypervisor and
marked immutable in the RMP entrie(s).
Add a new generic SEV API interface to allocate/free hypervisor fixed pages
which abstracts hypervisor fixed page allocation/free for PSP sub devices. The
API internally uses SNP_INIT_EX to transition pages to HV-Fixed page state.
If SNP is not enabled then the allocator is simply a wrapper over
alloc_pages() and __free_pages().
When the sub device free the pages, they are put on a free list and future
allocation requests will try to re-use the freed pages from this list. But
this list is not preserved across PSP driver load/unload hence this free/reuse
support is only supported while PSP driver is loaded. As HV_FIXED page state
is only changed at reboot, these pages are leaked as they cannot be returned
back to the page allocator and then potentially allocated to guests, which
will cause SEV-SNP guests to fail to start or terminate when accessing the
HV_FIXED page.
Suggested-by: Thomas Lendacky <Thomas.Lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/cover.1758057691.git.ashish.kalra@amd.com
|
|
__sev_platform_shutdown_locked()
When
9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown")
moved the error messages dumping so that they don't need to be issued by
the callers, it missed the case where __sev_firmware_shutdown() calls
__sev_platform_shutdown_locked() with a NULL argument which leads to
a NULL ptr deref on the shutdown path, during suspend to disk:
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 983 Comm: hib.sh Not tainted 6.17.0-rc4+ #1 PREEMPT(voluntary)
Hardware name: Supermicro Super Server/H12SSL-i, BIOS 2.5 09/08/2022
RIP: 0010:__sev_platform_shutdown_locked.cold+0x0/0x21 [ccp]
That rIP is:
00000000000006fd <__sev_platform_shutdown_locked.cold>:
6fd: 8b 13 mov (%rbx),%edx
6ff: 48 8b 7d 00 mov 0x0(%rbp),%rdi
703: 89 c1 mov %eax,%ecx
Code: 74 05 31 ff 41 89 3f 49 8b 3e 89 ea 48 c7 c6 a0 8e 54 a0 41 bf 92 ff ff ff e8 e5 2e 09 e1 c6 05 2a d4 38 00 01 e9 26 af ff ff <8b> 13 48 8b 7d 00 89 c1 48 c7 c6 18 90 54 a0 89 44 24 04 e8 c1 2e
RSP: 0018:ffffc90005467d00 EFLAGS: 00010282
RAX: 00000000ffffff92 RBX: 0000000000000000 RCX: 0000000000000000
^^^^^^^^^^^^^^^^
and %rbx is nice and clean.
Call Trace:
<TASK>
__sev_firmware_shutdown.isra.0
sev_dev_destroy
psp_dev_destroy
sp_destroy
pci_device_shutdown
device_shutdown
kernel_power_off
hibernate.cold
state_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Pass in a pointer to the function-local error var in the caller.
With that addressed, suspending the ccp shows the error properly at
least:
ccp 0000:47:00.1: sev command 0x2 timed out, disabling PSP
ccp 0000:47:00.1: SEV: failed to SHUTDOWN error 0x0, rc -110
SEV-SNP: Leaking PFN range 0x146800-0x146a00
SEV-SNP: PFN 0x146800 unassigned, dumping non-zero entries in 2M PFN region: [0x146800 - 0x146a00]
...
ccp 0000:47:00.1: SEV-SNP firmware shutdown failed, rc -16, error 0x0
ACPI: PM: Preparing to enter system sleep state S5
kvm: exiting hardware virtualization
reboot: Power down
Btw, this driver is crying to be cleaned up to pass in a proper I/O
struct which can be used to store information between the different
functions, otherwise stuff like that will happen in the future again.
Fixes: 9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Reviewed-by: Ashish Kalra <ashish.kalra@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
LAN969x uses the Atmel crypto, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the unused "hpre-curve25519" kpp algorithm.
Cc: Longfang Liu <liulongfang@huawei.com>
Cc: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/20250906213523.84915-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Loongson's Random Number Generator is found inside Loongson Security
Engine chip.
Co-developed-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20250705072045.1067-3-zhaoqunqin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Reimplement crypto/md5.c on top of the new MD5 library functions. Also
add support for HMAC-MD5, again just wrapping the library functions.
This closely mirrors crypto/sha1.c.
Link: https://lore.kernel.org/r/20250805222855.10362-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Allow hash drivers without fallbacks (e.g., hardware key)
Algorithms:
- Add hmac hardware key support (phmac) on s390
- Re-enable sha384 in FIPS mode
- Disable sha1 in FIPS mode
- Convert zstd to acomp
Drivers:
- Lower priority of qat skcipher and aead
- Convert aspeed to partial block API
- Add iMX8QXP support in caam
- Add rate limiting support for GEN6 devices in qat
- Enable telemetry for GEN6 devices in qat
- Implement full backlog mode for hisilicon/sec2"
* tag 'v6.17-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: keembay - Use min() to simplify ocs_create_linked_list_from_sg()
crypto: hisilicon/hpre - fix dma unmap sequence
crypto: qat - make adf_dev_autoreset() static
crypto: ccp - reduce stack usage in ccp_run_aes_gcm_cmd
crypto: qat - refactor ring-related debug functions
crypto: qat - fix seq_file position update in adf_ring_next()
crypto: qat - fix DMA direction for compression on GEN2 devices
crypto: jitter - replace ARRAY_SIZE definition with header include
crypto: engine - remove {prepare,unprepare}_crypt_hardware callbacks
crypto: engine - remove request batching support
crypto: qat - flush misc workqueue during device shutdown
crypto: qat - enable rate limiting feature for GEN6 devices
crypto: qat - add compression slice count for rate limiting
crypto: qat - add get_svc_slice_cnt() in device data structure
crypto: qat - add adf_rl_get_num_svc_aes() in rate limiting
crypto: qat - relocate service related functions
crypto: qat - consolidate service enums
crypto: qat - add decompression service for rate limiting
crypto: qat - validate service in rate limiting sysfs api
crypto: hisilicon/sec2 - implement full backlog mode for sec
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC code
It now lives in lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/,
and it is no longer artificially split into separate generic and arch
modules. This allows better inlining and dead code elimination
The generic CRC code is also no longer exported, simplifying the API.
(This mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request)
- Improve crc32c() performance on newer x86_64 CPUs on long messages by
enabling the VPCLMULQDQ optimized code
- Simplify the crypto_shash wrappers for crc32_le() and crc32c()
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code
- Remove unused and obsolete drivers for hardware CRC engines
- Remove CRC-32 combination functions that are no longer used
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c()
- Convert the crc32() macro to an inline function
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (26 commits)
lib/crc: x86/crc32c: Enable VPCLMULQDQ optimization where beneficial
lib/crc: x86: Reorganize crc-pclmul static_call initialization
lib/crc: crc64: Add include/linux/crc64.h to kernel-api.rst
lib/crc: crc32: Change crc32() from macro to inline function and remove cast
nvmem: layouts: Switch from crc32() to crc32_le()
lib/crc: crc32: Document crc32_le(), crc32_be(), and crc32c()
lib/crc: Explicitly include <linux/export.h>
lib/crc: Remove ARCH_HAS_* kconfig symbols
lib/crc: x86: Migrate optimized CRC code into lib/crc/
lib/crc: sparc: Migrate optimized CRC code into lib/crc/
lib/crc: s390: Migrate optimized CRC code into lib/crc/
lib/crc: riscv: Migrate optimized CRC code into lib/crc/
lib/crc: powerpc: Migrate optimized CRC code into lib/crc/
lib/crc: mips: Migrate optimized CRC code into lib/crc/
lib/crc: loongarch: Migrate optimized CRC code into lib/crc/
lib/crc: arm64: Migrate optimized CRC code into lib/crc/
lib/crc: arm: Migrate optimized CRC code into lib/crc/
lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/
lib/crc: Move files into lib/crc/
lib/crc32: Remove unused combination support
...
|
|
Use min() to simplify ocs_create_linked_list_from_sg() and improve its
readability.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Perform DMA unmapping operations before processing data.
Otherwise, there may be unsynchronized data accessed by
the CPU when the SWIOTLB is enabled.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The function adf_dev_autoreset() is only used within adf_aer.c and does
not need to be exposed outside the compilation unit. Make it static and
remove it from the header adf_common_drv.h.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A number of functions in this file have large structures on the stack,
ccp_run_aes_gcm_cmd() being the worst, in particular when KASAN
is enabled on gcc:
drivers/crypto/ccp/ccp-ops.c: In function 'ccp_run_sha_cmd':
drivers/crypto/ccp/ccp-ops.c:1833:1: error: the frame size of 1136 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
drivers/crypto/ccp/ccp-ops.c: In function 'ccp_run_aes_gcm_cmd':
drivers/crypto/ccp/ccp-ops.c:914:1: error: the frame size of 1632 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Avoid the issue by using dynamic memory allocation in the worst one
of these.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Refactor the functions `adf_ring_start()` and `adf_ring_next()` to
improve readability.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The `adf_ring_next()` function in the QAT debug transport interface
fails to correctly update the position index when reaching the end of
the ring elements. This triggers the following kernel warning when
reading ring files, such as
/sys/kernel/debug/qat_c6xx_<D:B:D:F>/transport/bank_00/ring_00:
[27725.022965] seq_file: buggy .next function adf_ring_next [intel_qat] did not update position index
Ensure that the `*pos` index is incremented before returning NULL when
after the last element in the ring is found, satisfying the seq_file API
requirements and preventing the warning.
Fixes: a672a9dc872e ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
QAT devices perform an additional integrity check during compression by
decompressing the output. Starting from QAT GEN4, this verification is
done in-line by the hardware. However, on GEN2 devices, the hardware
reads back the compressed output from the destination buffer and performs
a decompression operation using it as the source.
In the current QAT driver, destination buffers are always marked as
write-only. This is incorrect for QAT GEN2 compression, where the buffer
is also read during verification. Since commit 6f5dc7658094
("iommu/vt-d: Restore WO permissions on second-level paging entries"),
merged in v6.16-rc1, write-only permissions are strictly enforced, leading
to DMAR errors when using QAT GEN2 devices for compression, if VT-d is
enabled.
Mark the destination buffers as DMA_BIDIRECTIONAL. This ensures
compatibility with GEN2 devices, even though it is not required for
QAT GEN4 and later.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: cf5bb835b7c8 ("crypto: qat - fix DMA transfer direction")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc8).
Conflicts:
drivers/net/ethernet/microsoft/mana/gdma_main.c
9669ddda18fb ("net: mana: Fix warnings for missing export.h header inclusion")
755391121038 ("net: mana: Allocate MSI-X vectors dynamically")
https://lore.kernel.org/20250711130752.23023d98@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/icssg/icssg_prueth.h
6e86fb73de0f ("net: ti: icssg-prueth: Fix buffer allocation for ICSSG")
ffe8a4909176 ("net: ti: icssg-prueth: Read firmware-names from device tree")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove request batching support from crypto_engine, as there are no
drivers using this feature and it doesn't really work that well.
Instead of doing batching based on backlog, a more optimal approach
would be for the user to handle the batching (similar to how IPsec
can hook into GSO to get 64K of data each time or how block encryption
can use unit sizes much greater than 4K).
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Repeated loading and unloading of a device specific QAT driver, for
example qat_4xxx, in a tight loop can lead to a crash due to a
use-after-free scenario. This occurs when a power management (PM)
interrupt triggers just before the device-specific driver (e.g.,
qat_4xxx.ko) is unloaded, while the core driver (intel_qat.ko) remains
loaded.
Since the driver uses a shared workqueue (`qat_misc_wq`) across all
devices and owned by intel_qat.ko, a deferred routine from the
device-specific driver may still be pending in the queue. If this
routine executes after the driver is unloaded, it can dereference freed
memory, resulting in a page fault and kernel crash like the following:
BUG: unable to handle page fault for address: ffa000002e50a01c
#PF: supervisor read access in kernel mode
RIP: 0010:pm_bh_handler+0x1d2/0x250 [intel_qat]
Call Trace:
pm_bh_handler+0x1d2/0x250 [intel_qat]
process_one_work+0x171/0x340
worker_thread+0x277/0x3a0
kthread+0xf0/0x120
ret_from_fork+0x2d/0x50
To prevent this, flush the misc workqueue during device shutdown to
ensure that all pending work items are completed before the driver is
unloaded.
Note: This approach may slightly increase shutdown latency if the
workqueue contains jobs from other devices, but it ensures correctness
and stability.
Fixes: e5745f34113b ("crypto: qat - enable power management for QAT GEN4")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for enabling rate limiting(RL) feature for QAT GEN6 by
initializing the rl_data member in adf_hw_device_data structure.
Implement init_num_svc_aes() for GEN6 which will populate the number of
AEs associated with the RL service type.
Implement adf_gen6_get_svc_slice_cnt() for GEN6 which will return
the slice count that can support the RL service type.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In QAT GEN4 devices, the compression slice count was tracked using the
dcpr_cnt field.
Introduce a new cpr_cnt field in the rate limiting (RL) infrastructure to
track the compression (CPR) slice count independently. The cpr_cnt value is
populated via the RL_INIT admin message.
The existing dcpr_cnt field will now be used exclusively to cache the
decompression slice count, ensuring a clear separation between compression
and decompression tracking.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enhance the adf_hw_device_data structure by introducing a new callback
function get_svc_slice_cnt(), which provides a mechanism to query the
total number of accelerator available on the device for a specific
service.
Implement adf_gen4_get_svc_slice_cnt() for QAT GEN4 devices to support this
new interface. This function returns the total accelerator count for a
specific service.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enhance the rate limiting (RL) infrastructure by adding
adf_rl_get_num_svc_aes() which can be used to fetch the number of engines
associated with the service type. Expand the structure adf_rl_hw_data
with an array that contains the number of AEs per service.
Implement adf_gen4_init_num_svc_aes() for QAT GEN4 devices to calculate
the total number of acceleration engines dedicated to a specific service.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rename (1) is_service_enabled() to adf_is_service_enabled(), and
(2) srv_to_cfg_svc_type() to adf_srv_to_cfg_svc_type(), and move them to
adf_cfg_services.c which is the appropriate place for configuration-related
service logic. This improves code organization and modularity by grouping
related service configuration logic in a single location.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The enums `adf_base_services` (used in rate limiting) and `adf_services`
define the same values, resulting in code duplication.
To improve consistency across the QAT driver: (1) rename `adf_services`
to `adf_base_services` in adf_cfg_services.c to better reflect its role
in defining core services (those with dedicated accelerators),
(2) introduce a new `adf_extended_services` enum starting from
`SVC_BASE_COUNT`, and move `SVC_DCC` into it, as it represents an
extended service (DC with chaining), and (3) remove the redundant
`adf_base_services` enum from the rate limiting implementation.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a new base service type ADF_SVC_DECOMP to the QAT rate limiting (RL)
infrastructure. This enables RL support for the decompression (DECOMP)
service type, allowing service-level agreements (SLAs) to be enforced
when decompression is configured.
The new service is exposed in the sysfs RL service list for visibility.
Note that this support is applicable only to devices that provide the
decompression service, such as QAT GEN6 devices.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The sysfs interface 'qat_rl/srv' currently allows all valid services,
even if a service is not configured for the device. This leads to a failure
when attempting to add the SLA using 'qat_rl/sla_op'.
Add a check using is_service_enabled() to ensure the requested service is
enabled. If not, return -EINVAL to prevent invalid configurations.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch introduces a hierarchical backlog mechanism to cache
user data in high-throughput encryption/decryption scenarios,
the implementation addresses packet loss issues when hardware
queues overflow during peak loads.
First, we use sec_alloc_req_id to obtain an exclusive resource
from the pre-allocated resource pool of each queue, if no resource
is allocated, perform the DMA map operation on the request memory.
When the task is ready, we will attempt to send it to the hardware,
if the hardware queue is already full, we cache the request into
the backlog list, then return an EBUSY status to the upper layer
and instruct the packet-sending thread to pause transmission.
Simultaneously, when the hardware completes a task, it triggers
the sec callback function, within this function, reattempt to send
the requests from the backlog list and wake up the sending thread
until the hardware queue becomes fully occupied again.
In addition, it handles such exceptions like the hardware is reset
when packets are sent, it will switch to the software computing
and release occupied resources.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enable telemetry for QAT GEN6 devices by defining the firmware data
structures layouts, implementing the counters parsing logic and setting
the required properties on the adf_tl_hw_data data structure.
As for QAT GEN4, telemetry counters are exposed via debugfs using the
interface described in Documentation/ABI/testing/debugfs-driver-qat_telemetry.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
QAT GEN6 devices offer decompression as an additional service.
Update the telemetry ring pair service interface to support monitoring
decompression operations.
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The QAT driver includes infrastructure to report power management (PM)
information via debugfs. Extend this support to QAT GEN6 devices
by exposing PM debug data through the `pm_status` file.
This implementation reports the current PM state, power management
hardware control and status registers (CSR), and per-domain power
status specific to the QAT GEN6 architecture.
The debug functionality is implemented in adf_gen6_pm_dbgfs.c
and initialized as part of the enable_pm() function.
Co-developed-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Relocate the power management debugfs helper APIs in a common file
adf_pm_dbgfs_utils.h and adf_pm_dbgfs_utils.c so that it can be shared
between device generations.
When moving logic from adf_gen4_pm_debugfs.c to adf_pm_dbgfs_utils.c, the
include kernel.h has been replaced with the required include.
This does not introduce any functional change.
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The TCVCMAP (Traffic Class to Virtual Channel Mapping) field in the
PVC0CTL and PVC1CTL register controls how traffic classes are mapped to
virtual channels in QAT GEN6 hardware.
The driver previously wrote a default TCVCMAP value to this register, but
this configuration was incorrect.
Modify the TCVCMAP configuration to explicitly enable both VC0 and VC1,
and map Traffic Classes 0 to 7 → VC0 and Traffic Class 8 → VC1.
Replace FIELD_PREP() with FIELD_MODIFY() to ensure that only the intended
TCVCMAP field is updated, preserving other bits in the register. This
prevents unintended overwrites of unrelated configuration fields when
modifying TC to VC mappings.
Fixes: 17fd7514ae68 ("crypto: qat - add qat_6xxx driver")
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In the Makefile, the new build option CONFIG_CAAM_QI is defined conditioned
on the existence of the CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI, which is
properly defined in the Kconfig file. So, CONFIG_CAAM_QI is just a local
alias for CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI.
There is little benefit in the source code of having this slightly shorter
alias for this configuration, but it complicates further maintenance, as
searching for the impact of CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
requires to grep once, and then identify the option introduced and continue
searching for that. Further, tools, such as cross referencers, and scripts
to check Kconfig definitions and their use simply do not handle this
situation. Given that this is the only incidence of such a config alias in
the whole kernel tree, just prefer to avoid this pattern of aliasing here.
Use CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI throughout the Freescale
CAAM-Multicore platform driver backend source code.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The current implementation of the QAT live migration enablers is exclusive
to QAT GEN4 devices and resides within QAT GEN4 specific files. However,
the underlying mechanisms, such as the relevant CSRs and offsets,
can be shared between QAT GEN4 and QAT GEN6 devices.
Add the necessary enablers required to implement live migration for QAT
GEN6 devices to the abstraction layer to allow leveraging the existing
QAT GEN4 implementation.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The `bank_state` structure represents the state of a bank of rings.
As part of recent refactoring, the functions that interact with this
structure have been moved to a new unit, adf_bank_state.c.
To align with this reorganization, rename `struct bank_state` to
`struct adf_bank_state` and move its definition to adf_bank_state.h.
Also relocate the associated `struct ring_config` to the same header
to consolidate related definitions.
Update all references to use the new structure name.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The existing implementation of bank state management functions,
including saving and restoring state, is located within 4xxx device
files. However, these functions do not contain GEN4-specific code and
are applicable to other QAT generations.
Relocate the bank state management functions to a new file,
adf_bank_state.c, and rename them removing the `gen4` prefix. This change
enables the reuse of such functions across different QAT generations.
Add documentation to bank state related functions that were
moved from QAT 4xxx specific files to common files.
This does not introduce any functional change.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The macro CHECK_STAT is used to check that all ring statuses match the
saved state during restoring the state of bank.
Replace the CHECK_STAT macro with the static inline function `check_stat()`
to improve type safety, readability, and debuggability.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add pr_fmt() to adf_gen4_hw_data.c logging and update the debug and error
messages to utilize it accordingly.
This does not introduce any functional changes.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ZUC-256 EEA (encryption) and EIA (integrity) algorithms are not
supported on QAT GEN5 devices, as their current implementation does not
align with the NIST specification. Earlier versions of the ZUC-256
specification used a different initialization scheme, which has since
been revised to comply with the 5G specification.
Due to this misalignment with the updated specification, remove support
for ZUC-256 EEA and EIA for QAT GEN5 by masking out the ZUC-256
capability.
Fixes: fcf60f4bcf549 ("crypto: qat - add support for 420xx devices")
Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: d358f1abbf71 ("crypto: img-hash - Add Imagination Technologies hw hash accelerator")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 472b04444cd3 ("crypto: keembay - Add Keem Bay OCS HCU driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Like I did for crypto/sha512.c, rework crypto/sha1_generic.c (renamed to
crypto/sha1.c) to simply wrap the normal library functions instead of
accessing the low-level block function directly. Also add support for
HMAC-SHA1, again just wrapping the library functions.
Since the replacement crypto_shash algorithms are implemented using the
(potentially arch-optimized) library functions, give them driver names
ending with "-lib" rather than "-generic". Update crypto/testmgr.c and
an odd driver to take this change in driver name into account.
Note: to see the diff from crypto/sha1_generic.c to crypto/sha1.c, view
this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
