summaryrefslogtreecommitdiff
path: root/drivers/crypto
AgeCommit message (Collapse)Author
2020-12-11crypto: atmel-i2c - select CONFIG_BITREVERSEArnd Bergmann
The bitreverse helper is almost always built into the kernel, but in a rare randconfig build it is possible to hit a case in which it is a loadable module while the atmel-i2c driver is built-in: arm-linux-gnueabi-ld: drivers/crypto/atmel-i2c.o: in function `atmel_i2c_checksum': atmel-i2c.c:(.text+0xa0): undefined reference to `byte_rev_table' Add one more 'select' statement to prevent this. Fixes: 11105693fa05 ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-11crypto: hisilicon/trng - replace atomic_add_return()Yejune Deng
a set of atomic_inc_return() looks more neater Signed-off-by: Yejune Deng <yejune.deng@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-11crypto: keembay - Add support for Keem Bay OCS AES/SM4Mike Healy
Add support for the AES/SM4 crypto engine included in the Offload and Crypto Subsystem (OCS) of the Intel Keem Bay SoC, thus enabling hardware-acceleration for the following transformations: - ecb(aes), cbc(aes), ctr(aes), cts(cbc(aes)), gcm(aes) and cbc(aes); supported for 128-bit and 256-bit keys. - ecb(sm4), cbc(sm4), ctr(sm4), cts(cbc(sm4)), gcm(sm4) and cbc(sm4); supported for 128-bit keys. The driver passes crypto manager self-tests, including the extra tests (CRYPTO_MANAGER_EXTRA_TESTS=y). Signed-off-by: Mike Healy <mikex.healy@intel.com> Co-developed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-04crypto: cpt - Fix sparse warnings in cptpfHerbert Xu
This patch fixes a few sparse warnings that were missed in the last round. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: ccree - rework cache parameters handlingGilad Ben-Yossef
Rework the setting of DMA cache parameters, program more appropriate values and explicitly set sharability domain. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: cavium - Use dma_set_mask_and_coherent to simplify codeChristophe JAILLET
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by an equivalent 'dma_set_mask_and_coherent()' which is much less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify codeChristophe JAILLET
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by an equivalent 'dma_set_mask_and_coherent()' which is much less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: cavium/zip - Use dma_set_mask_and_coherent to simplify codeChristophe JAILLET
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by an equivalent 'dma_set_mask_and_coherent()' which is much less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: ccree - Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: hisilicon/trng - add support for PRNGWeili Qian
This patch adds support for pseudo random number generator(PRNG) in Crypto subsystem. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: hisilicon/trng - add HiSilicon TRNG driver supportWeili Qian
Move existing char/hw_random/hisi-trng-v2.c to crypto/hisilicon/trng.c. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: qat - fix excluded_middle.cocci warningskernel test robot
Condition !A || A && B is equivalent to !A || B. Generated by: scripts/coccinelle/misc/excluded_middle.cocci Fixes: b76f0ea01312 ("coccinelle: misc: add excluded_middle.cocci script") CC: Denis Efremov <efremov@linux.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: qce - Fix SHA result buffer corruption issuesThara Gopinath
Partial hash was being copied into the final result buffer without the entire message block processed. Depending on how the end user processes this result buffer, errors vary from result buffer corruption to result buffer poisoing. Fix this issue by ensuring that only the final hash value is copied into the result buffer. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-27crypto: qce - Enable support for crypto engine on sdm845Thara Gopinath
Add support Qualcomm Crypto Engine accelerated encryption and authentication algorithms on sdm845. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: sun8i-ce - fix two error path's memory leakCorentin Labbe
This patch fixes the following smatch warnings: drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c:412 sun8i_ce_hash_run() warn: possible memory leak of 'result' Note: "buf" is leaked as well. Furthermore, in case of ENOMEM, crypto_finalize_hash_request() was not called which was an error. Fixes: 56f6d5aee88d ("crypto: sun8i-ce - support hash algorithms") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: kconfig - fix a couple of spelling mistakesColin Ian King
There are a couple of spelling mistakes in two crypto Kconfig files. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: qat - add qat_4xxx driverGiovanni Cabiddu
Add support for QAT 4xxx devices. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: qat - add hook to initialize vector routing tableGiovanni Cabiddu
Add an hook to initialize the vector routing table with the default values before MSIx is enabled. The new function set_msix_rttable() is called only if present in the struct adf_hw_device_data of the device. This is to allow for QAT devices that do not support that functionality. Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: qat - target fw images to specific AEsGiovanni Cabiddu
Introduce support for devices that require multiple firmware images. If a device requires more than a firmware image to operate, load the image to the appropriate Acceleration Engine (AE). Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: omap-aes - Fix PM disable depth imbalance in omap_aes_probeZhang Qilong
The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. Fixes: f7b2b5dd6a62a ("crypto: omap-aes - add error check for pm_runtime_get_sync") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: hisilicon/zip - add a work_queue for zip irqYang Shen
The patch 'irqchip/gic-v3-its: Balance initial LPI affinity across CPUs' set the IRQ to an uncentain CPU. If an IRQ is bound to the CPU used by the thread which is sending request, the throughput will be just half. So allocate a 'work_queue' and set as 'WQ_UNBOUND' to do the back half work on some different CPUS. Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: sha - split sha.h into sha1.h and sha2.hEric Biggers
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2, and <crypto/sha3.h> contains declarations for SHA-3. This organization is inconsistent, but more importantly SHA-1 is no longer considered to be cryptographically secure. So to the extent possible, SHA-1 shouldn't be grouped together with any of the other SHA versions, and usage of it should be phased out. Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and <crypto/sha2.h>, and make everyone explicitly specify whether they want the declarations for SHA-1, SHA-2, or both. This avoids making the SHA-1 declarations visible to files that don't want anything to do with SHA-1. It also prepares for potentially moving sha1.h into a new insecure/ or dangerous/ directory. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: crypto4xx - Replace bitwise OR with logical OR in crypto4xx_build_pdNathan Chancellor
Clang warns: drivers/crypto/amcc/crypto4xx_core.c:921:60: warning: operator '?:' has lower precedence than '|'; '|' will be evaluated first [-Wbitwise-conditional-parentheses] (crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AEAD) ? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ drivers/crypto/amcc/crypto4xx_core.c:921:60: note: place parentheses around the '|' expression to silence this warning (crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AEAD) ? ^ ) drivers/crypto/amcc/crypto4xx_core.c:921:60: note: place parentheses around the '?:' expression to evaluate it first (crypto_tfm_alg_type(req->tfm) == CRYPTO_ALG_TYPE_AEAD) ? ^ ( 1 warning generated. It looks like this should have been a logical OR so that PD_CTL_HASH_FINAL gets added to the w bitmask if crypto_tfm_alg_type is either CRYPTO_ALG_TYPE_AHASH or CRYPTO_ALG_TYPE_AEAD. Change the operator so that everything works properly. Fixes: 4b5b79998af6 ("crypto: crypto4xx - fix stalls under heavy load") Link: https://github.com/ClangBuiltLinux/linux/issues/1198 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: caam/qi - simplify error path for context allocationHoria Geantă
Wang Qing reports that IS_ERR_OR_NULL() should be matched with PTR_ERR_OR_ZERO(), not PTR_ERR(). As it turns out, the error path always returns an error code, i.e. NULL is never returned. Update the code accordingly - s/IS_ERR_OR_NULL/IS_ERR. Reported-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: hisilicon/sec2 - Fix aead authentication setting key errorKai Ye
Fix aead auth setting key process error. if use soft shash function, driver need to use digest size replace of the user input key length. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add gen4 firmware loaderJack Xu
Add support for the QAT gen4 devices in the firmware loader. Signed-off-by: Jack Xu <jack.xu@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add support for broadcasting modeJack Xu
Add support for broadcasting mode in firmware loader to enable the next generation of QAT devices. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add support for shared ustoreJack Xu
Add support for shared ustore mode support. This is required by the next generation of QAT devices to share the same fw image across engines. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - allow to target specific AEsJack Xu
Introduce new API, qat_uclo_set_cfg_ae_mask(), to allow the load of the firmware image to a subset of Acceleration Engines (AEs). This is required by the next generation of QAT devices to be able to load different firmware images to the device. Signed-off-by: Jack Xu <jack.xu@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add FCU CSRs to chip infoJack Xu
Add firmware control unit (FCU) CSRs to chip info so the firmware authentication code is common between all devices. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add CSS3K supportJack Xu
Add support for CSS3K, which uses RSA3K as image signature algorithm, to support the next generation of QAT devices. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - use ae_maskJack Xu
Use ae_mask to decide which Accelerator Engine (AE) to target in AE related operations, instead of a sequential loop, to skip AEs that are fused out. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add check for null pointerJack Xu
Add null pointer check when freeing the memory for firmware. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add misc control CSR to chip infoJack Xu
Add misc control CSR to chip info since the CSR offset will be different in the next generation of QAT devices. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add wake up event to chip infoJack Xu
Add the wake up event to chip info since this value will be different in the next generation of QAT devices. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add clock enable CSR to chip infoJack Xu
Add global clock enable CSR to the chip info since the CSR offset will be different in the next generation of QAT devices. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add reset CSR and mask to chip infoJack Xu
Add reset CSR offset and mask to chip info since they are different in new QAT devices. This also simplifies the reset/clrReset functions by using the reset mask. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add local memory size to chip infoJack Xu
Add the local memory size to the chip info since the size of this memory will be different in the next generation of QAT devices. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add support for lm2 and lm3Jack Xu
Add support for local memory lm2 and lm3 which is introduced in the next generation of QAT devices. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add next neighbor to chip_infoJack Xu
Introduce the next neighbor (NN) capability in chip_info as NN registers are not supported in certain SKUs of QAT. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - replace check based on DIDJack Xu
Modify condition in qat_uclo_wr_mimage() to use a capability of the device (sram_visible), rather than the device ID, so the check is not specific to devices of the same type. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - introduce chip info structureJack Xu
Introduce the chip info structure which contains device specific information. The initialization path has been split between common and hardware specific in order to facilitate the introduction of the next generation hardware. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - refactor long expressionsJack Xu
Replace long expressions with local variables in the functions qat_uclo_wr_uimage_page(), qat_uclo_init_globals() and qat_uclo_init_umem_seg() to improve readability. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - refactor qat_uclo_set_ae_mode()Jack Xu
Refactor qat_uclo_set_ae_mode() by moving the logic that sets the AE modes to a separate function, qat_hal_set_modes(). Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - move defines to header filesJack Xu
Move the definition of ICP_QAT_AE_OFFSET, ICP_QAT_CAP_OFFSET, LOCAL_TO_XFER_REG_OFFSET and ICP_QAT_EP_OFFSET from qat_hal.c to icp_qat_hal.h to avoid the definition of generation specific constants in qat_hal.c. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - remove global CSRs helpersJack Xu
Include the offset of GLOBAL_CSR directly into the enum hal_global_csr and remove the macros SET_GLB_CSR/GET_GLB_CSR to simplify the global CSR access. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - refactor AE startJack Xu
Change the API and the behaviour of the qat_hal_start() function. With this change, the function starts under the hood all acceleration engines (AEs) and there is no longer need to call it for each engine. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - change micro word data maskJack Xu
Change micro word data mask since the Acceleration Engine (AE) instruction codes have been changed in the new generation QAT devices. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - change type for ctx_maskJack Xu
Change type for ctx_mask from unsigned char to unsigned long to avoid type casting. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-13crypto: qat - add support for relative FW ucode loadingJack Xu
Improve the way micro instructions (FW code) are uploaded to Accelerator Engines (AEs). If code starts at PC zero (absolute addressing), read uwords with no relative address. Otherwise, use relative addressing to the page region. Signed-off-by: Jack Xu <jack.xu@intel.com> Co-developed-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-09-12 00:08:05 +0000