| Age | Commit message (Collapse) | Author |
|---|
|
Since the introduction of the PM domain support for the scu-pd, the genpd
framework has been continuously improved. More preciously, using a single
global power domain can quite easily be deployed for imx platforms.
To avoid confusions, let's therefore make an update to the comments about
the missing pieces.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
1st set of IIO/counter device support, features and cleanup in the 5.13 cycle
Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.
Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem. Merge required updating to reflect
some changes in IIO.
Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.
IIO New Device Support
* adi,ad5686
- Add info to support AD5673R and AD5677R
* bosch,bmi088
- New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
- New driver for this proximity sensor that exposes a 'front'
sensor. Very simple switch like device, but driver allows it
to share interface with more sophisticated proximity sensors.
* iio_scmi
- New driver to support ARM SCMI protocol to expose underlying
accelerometers and gyroscopes via this firmware interface.
* st,st_magn
- Add ID for IISMDC magnetometer.
* ti,ads131e0
- New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs
Counter New Device Support
* IRQ or GPIO based counter
- New driver for a conceptually simple counter that uses interrupts
to perform the count.
Features
* core
- Dual buffer supprt including:
Various helpers to centralize handling of bufferer related elements.
Document existing and new IOCTLs
Register the IIO chrdev only if it can actually be used for anything.
Rework attribute group creation in the core (lots of patches)
Merge buffer/ and scan_elements/ entries into one list + maintain
backwards compatible set.
Introduce the internal logic and IOCTL to allow multiple buffers
+ access to an anon FD per buffer to actually read from it.
Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
Update ABI docs.
A few follow up fixes, unsuprising as this was a huge bit of rework.
- Move common case setting of trig->parent to the core.
- Provide an iio_read_channel_processed_scale() to avoid loss of
precision from iio_read_channel_processed() then applying integer
scale. Use it in ntc_thermistor driver in hwmon.
- Allow drivers to specify labels from elsewhere than DT. Use it for
bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
- Document label usage for proximity and accelerometer sensors.
- Some local variable renames for consistency
tools
- Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
- Add trigger support for devices that don't support notification method.
* adi,ad7124
- Allow more than 8 channels. This is a complex little device, but is
capable of supporting up to 16 channels if the share certain
configuration settings.
* hrtimer-trigger
- Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
- Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
- Enable timetamps when not using DMA.
* vishay,vcnl3020
- Sampling frequency control.
Cleanup and minor fixes:
* treewide
- Use some getter and setter functions instead of opencoding.
- Set of fixes for pointless casts in various drivers.
- Avoid wrong kernel-doc marking on comment blocks.
- Fix various other minor kernel-doc issues shown by W=1
* core
- Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
- Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
- Add unit tests for iio_format_value()
* docs
- Fix formatting/typos in iio_configfs.rst and buffers.rst
- Add documentation of index in buffers.rst
- Fix scan element description
- Avoid some issues with HTML generation from ABI docs by moving
duplicated defintions to more generic files.
- Drop reference to long dead mailing list.
* 104-quad
- Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
- Fix wrong bit of docs.
* adi,ad5791
- Typos
* adi,ad9834
- Switch to device managed functions in probe.
* adi,adis*
- Add and use helpers for locking to reduced duplication.
* adi,adis16480
- Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
- Calculate the IMU scaled internal sampling rate and runtime depending
on sysfs based configuration rather than getting from DT. Drop now
unnecessary property from DT bindings doc.
* cros_ec
- Fix result of a series of recent changes that means extended buffer
attributes turn up in the wrong place. Too complex to revert the
various patches unfortunately so this is a bit messy.
* fsl,mma3452
- Indentation cleanup.
* hid-sensors
- Size of storage needs to increase for some parts when using quaternions.
- Move the get sensistivity attribute to hid-sensors-common to reduce
duplication. Enable it for more device types.
- Correctly handle relative sensitivity if reported that way including
documenting the new ABI.
* maxim,max517
- Use device managed functions in probe.
* mediatek,mt6360-adc
- Use asm/unaligned.h instead of directly including
unaligned/be_byteshift.h
* novuton,npcm-adc
- Local lock instead of missusing mlock.
* semtech,sx9500
- Typos
* st,sensor
- typo fix
* st,spear-adc
- Local lock instead of missusing mlock.
* st,stm32-adc
- Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
- Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
- Local lock instead of missusing mlock.
* ti,tmp007
- Switch to device managed functions in probe.
Other
* MAINTAINERS
- Move Peter Meerwald-Stadler to Credits at his request
* tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (119 commits)
iio: acpi_als: Add trigger support
iio: acpi_als: Add local variable dev in probe
iio: acpi_als: Add timestamp channel
iio: adc: ad7292: Modify the bool initialization assignment
iio: cros: unify hw fifo attributes without API changes
iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant
iio: event_monitor: Enable events before monitoring
dt-bindings: iio: adc: Add compatible for Mediatek MT8195
iio:magnetometer: Add Support for ST IIS2MDC
dt-bindings: iio: st,st-sensors add IIS2MDC.
staging: iio: ad9832: kernel-doc fixes
iio:dac:max517.c: Use devm_iio_device_register()
iio:cros_ec_sensors: Fix a wrong function name in kernel doc.
iio: buffer: kfifo_buf: kernel-doc, typo in function name.
iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.
iio: adc: adi-axi-adc: Drop false marking for kernel-doc
iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name
iio: dac: ad5504: fix wrong part number in kernel-doc structure name.
iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name
iio: adc: ti-adc084s021: kernel-doc fixes, missing function names
...
|
|
When cross compiling x86 on an ARM machine with clang, there are several
errors along the lines of:
arch/x86/include/asm/page_64.h:52:7: error: invalid output constraint '=D' in asm
This happens because the x86 flags in the EFI stub are not derived from
KBUILD_CFLAGS like the other architectures are and the clang flags that
set the target architecture ('--target=') and the path to the GNU cross
tools ('--prefix=') are not present, meaning that the host architecture
is targeted.
These flags are available as $(CLANG_FLAGS) from the main Makefile so
add them to the cflags for x86 so that cross compiling works as expected.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20210326000435.4785-4-nathan@kernel.org
|
|
Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and
SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From
the Linux kernel point of view these are flavors of the same
architecture so there is no need for three top-level arm64
architectures. Simplify this by merging all three architectures into
ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries.
The side effect is that the INTEL_STRATIX10_SERVICE will now be
available for both 32-bit and 64-bit Intel SoCFPGA, even though it is
used only for 64-bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
It'll simplify the firmware handling for most consumers.
Suggested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
When unbinding the firmware device we need to make sure it has no
consumers left. Otherwise we'd leave them with a firmware handle
pointing at freed memory.
Keep a reference count of all consumers and introduce rpi_firmware_put()
which will permit automatically decrease the reference count upon
unbinding consumer drivers.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull EFI fixes from Ard Biesheuvel:
"- another missing RT_PROP table related fix, to ensure that the efivarfs
pseudo filesystem fails gracefully if variable services are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In the for loop in efi_mem_reserve_persistent(), prsv = rsv->next
use the unmapped rsv. Use the unmapped pages will cause segment
fault.
Fixes: 18df7577adae6 ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
As per UEFI spec 2.8B section 8.2, EFI_UNSUPPORTED may be returned by
EFI variable runtime services if no variable storage is supported by
firmware. In this case, there is no point for kernel to continue
efivars initialization. That said, efivar_init() should fail by
returning an error code, so that efivarfs will not be mounted on
/sys/firmware/efi/efivars at all. Otherwise, user space like efibootmgr
will be confused by the EFIVARFS_MAGIC seen there, while EFI variable
calls cannot be made successfully.
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Do not power off console domain in runtime pm.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Ard Biesheuvel via Borislav Petkov:
"Fix an oversight in the handling of EFI_RT_PROPERTIES_TABLE, which was
added v5.10, but failed to take the SetVirtualAddressMap() RT service
into account"
* tag 'efi-urgent-for-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: stub: omit SetVirtualAddressMap() if marked unsupported in RT_PROP table
|
|
This change provides ARM SCMI Protocol based IIO device.
This driver provides support for Accelerometer and Gyroscope using
SCMI Sensor Protocol extensions added in the SCMIv3.0 ARM specification
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jyoti Bhayana <jbhayana@google.com>
Link: https://lore.kernel.org/r/20210212172235.507028-2-jbhayana@google.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210309231259.78050-2-jbhayana@google.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Separated function was not improving code quality much (or at all).
Moreover it expected possible flash end address as argument and it was
returning NVRAM size.
The new code always operates on offsets which means less logic and less
calculations.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This loop requires variable initialization, stop condition and post
iteration increment. It's pretty much a for loop definition.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This simplifies function finding NVRAM. It doesn't directly deal with
NVRAM structure anymore and is a bit smaller.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This avoids duplicating code doing casting and checking for NVRAM magic.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
1. Use "bcm47xx_" function name prefix for consistency
2. It takes flash start as argument so s/iobase/flash_start/
3. "off" was used for finding flash end so just call it "flash_size"
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
When DMI information is not present, trying to assign the card long
name results in the following warning.
WARNING KERN tegra-audio-graph-card sound: ASoC: no DMI vendor name!
The initial solution suggested was to test if the card device is an
ACPI one. This causes a regression visible to userspace on all Intel
platforms, with UCM unable to load card profiles based on DMI
information: the card devices are not necessarily ACPI ones, e.g. when
the parent creates platform devices on Intel devices.
To fix this problem, this patch exports the existing dmi_available
variable and tests it in the ASoC core.
Fixes: c014170408bc ("ASoC: soc-core: Prevent warning if no DMI table is present")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20210310193928.108850-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As per ARM ARM DDI 0487G.a, when FEAT_LPA2 is implemented, ID_AA64MMFR0_EL1
might contain a range of values to describe supported translation granules
(4K and 16K pages sizes in particular) instead of just enabled or disabled
values. This changes __enable_mmu() function to handle complete acceptable
range of values (depending on whether the field is signed or unsigned) now
represented with ID_AA64MMFR0_TGRAN_SUPPORTED_[MIN..MAX] pair. While here,
also fix similar situations in EFI stub and KVM as well.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1615355590-21102-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The EFI_RT_PROPERTIES_TABLE contains a mask of runtime services that are
available after ExitBootServices(). This mostly does not concern the EFI
stub at all, given that it runs before that. However, there is one call
that is made at runtime, which is the call to SetVirtualAddressMap()
(which is not even callable at boot time to begin with)
So add the missing handling of the RT_PROP table to ensure that we only
call SetVirtualAddressMap() if it is not being advertised as unsupported
by the firmware.
Cc: <stable@vger.kernel.org> # v5.10+
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Fix smatch warning:
drivers/firmware/xilinx/zynqmp.c:1288 zynqmp_firmware_remove()
error: dereferencing freed memory 'feature_data'
Use hash_for_each_safe for safe removal of hash entry.
Fixes: acfdd18591ea ("firmware: xilinx: Use hash-table for api feature check")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/1612765883-22018-1-git-send-email-rajan.vaja@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO updates from Kees Cook:
"Clang Link Time Optimization.
This is built on the work done preparing for LTO by arm64 folks,
tracing folks, etc. This includes the core changes as well as the
remaining pieces for arm64 (LTO has been the default build method on
Android for about 3 years now, as it is the prerequisite for the
Control Flow Integrity protections).
While x86 LTO enablement is done, it depends on some pending objtool
clean-ups. It's possible that I'll send a "part 2" pull request for
LTO that includes x86 support.
For merge log posterity, and as detailed in commit dc5723b02e52
("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
build:
make LLVM=1 LLVM_IAS=1 defconfig
scripts/config -e LTO_CLANG_THIN
make LLVM=1 LLVM_IAS=1
(To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
and "ARCH=arm64" to the "make" command lines.)
Summary:
- Clang LTO build infrastructure and arm64-specific enablement (Sami
Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"
* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
arm64: allow LTO to be selected
arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
arm64: vdso: disable LTO
drivers/misc/lkdtm: disable LTO for rodata.o
efi/libstub: disable LTO
scripts/mod: disable LTO for empty.c
modpost: lto: strip .lto from module names
PCI: Fix PREL32 relocations for LTO
init: lto: fix PREL32 relocations
init: lto: ensure initcall ordering
kbuild: lto: add a default list of used symbols
kbuild: lto: merge module sections
kbuild: lto: limit inlining
kbuild: lto: fix module versioning
kbuild: add support for Clang LTO
tracing: move function tracer options to Kconfig
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for eMMC inline encryption
- Add a helper function to parse DT properties for clock phases
- Some improvements and cleanups for the mmc_test module
MMC host:
- android-goldfish: Remove driver
- cqhci: Add support for eMMC inline encryption
- dw_mmc-zx: Remove driver
- meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED
- mmci: Add support for probing bus voltage level translator
- mtk-sd: Address race condition for request timeouts
- sdhci_am654: Add Support for the variant on TI's AM64 SoC
- sdhci-esdhc-imx: Prevent kernel panic at ->remove()
- sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4
- sdhci-msm: Add Inline Crypto Engine support
- sdhci-msm: Use actual_clock to improve timeout calculations
- sdhci-of-aspeed: Add Andrew Jeffery as maintainer
- sdhci-of-aspeed: Extend clock support for the AST2600 variant
- sdhci-pci-gli: Increase idle period for low power state for GL9763E
- sdhci-pci-o2micro: Make tuning for SDR104 HW more robust
- sdhci-sirf: Remove driver
- sdhci-xenon: Add support for the AP807 variant
- sunxi-mmc: Add support for the A100 variant
- sunxi-mmc: Ensure host is suspended during system sleep
- tmio: Add detection of data timeout errors
- tmio/renesas_sdhi: Extend support for retuning
- renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops"
* tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
mmc: sdhci-esdhc-imx: fix kernel panic when remove module
mmc: host: Retire MMC_GOLDFISH
mmc: cb710: Use new tasklet API
mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure
mmc: mmc_test: use erase_arg for mmc_erase command
mmc: wbsd: Use new tasklet API
mmc: via-sdmmc: Use new tasklet API
mmc: uniphier-sd: Use new tasklet API
mmc: tifm_sd: Use new tasklet API
mmc: s3cmci: Use new tasklet API
mmc: omap: Use new tasklet API
mmc: dw_mmc: Use new tasklet API
mmc: au1xmmc: Use new tasklet API
mmc: atmel-mci: Use new tasklet API
mmc: cavium: Replace spin_lock_irqsave with spin_lock in hard IRQ
mmc: queue: Remove unused define
mmc: core: Drop redundant bouncesz from struct mmc_card
mmc: core: Drop redundant member in struct mmc host
mmc: core: Use host instead of card argument to mmc_spi_send_csd()
mmc: core: Exclude unnecessary header file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- vDSO build improvements including support for building with BSD.
- Cleanup to the AMU support code and initialisation rework to support
cpufreq drivers built as modules.
- Removal of synthetic frame record from exception stack when entering
the kernel from EL0.
- Add support for the TRNG firmware call introduced by Arm spec
DEN0098.
- Cleanup and refactoring across the board.
- Avoid calling arch_get_random_seed_long() from
add_interrupt_randomness()
- Perf and PMU updates including support for Cortex-A78 and the v8.3
SPE extensions.
- Significant steps along the road to leaving the MMU enabled during
kexec relocation.
- Faultaround changes to initialise prefaulted PTEs as 'old' when
hardware access-flag updates are supported, which drastically
improves vmscan performance.
- CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
(#1024718)
- Preparatory work for yielding the vector unit at a finer granularity
in the crypto code, which in turn will one day allow us to defer
softirq processing when it is in use.
- Support for overriding CPU ID register fields on the command-line.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
drivers/perf: Replace spin_lock_irqsave to spin_lock
mm: filemap: Fix microblaze build failure with 'mmu_defconfig'
arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+
arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line
arm64: Defer enabling pointer authentication on boot core
arm64: cpufeatures: Allow disabling of BTI from the command-line
arm64: Move "nokaslr" over to the early cpufeature infrastructure
KVM: arm64: Document HVC_VHE_RESTART stub hypercall
arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0
arm64: Add an aliasing facility for the idreg override
arm64: Honor VHE being disabled from the command-line
arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line
arm64: cpufeature: Add an early command-line cpufeature override facility
arm64: Extract early FDT mapping from kaslr_early_init()
arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding()
arm64: cpufeature: Add global feature override facility
arm64: Move SCTLR_EL1 initialisation to EL-agnostic code
arm64: Simplify init_el2_state to be non-VHE only
arm64: Move VHE-specific SPE setup to mutate_to_vhe()
arm64: Drop early setting of MDSCR_EL2.TPMS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ard Biesheuvel via Borislav Petkov:
"A few cleanups left and right, some of which were part of a initrd
measured boot series that needs some more work, and so only the
cleanup patches have been included for this release"
* tag 'efi-next-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm64: Update debug prints to reflect other entropy sources
efi: x86: clean up previous struct mm switching
efi: x86: move mixed mode stack PA variable out of 'efi_scratch'
efi/libstub: move TPM related prototypes into efistub.h
efi/libstub: fix prototype of efi_tcg2_protocol::get_event_log()
efi/libstub: whitespace cleanup
efi: ia64: move IA64-only declarations to new asm/efi.h header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
SCMI firmware:
- add support for a completion interrupt
Reset controllers:
- new driver for BCM4908
- new devm_reset_control_get_optional_exclusive_released() function
Memory controllers:
- Renesas RZ/G2 support
- Tegra124 interconnect support
- Allow more drivers to be loadable modules
TEE/optee firmware:
- minor code cleanup
The other half of this is SoC specific drivers that do not belong into
any other subsystem, most of them living in drivers/soc:
- Allwinner/sunxi power management work
- Allwinner H616 support
- ASpeed AST2600 system identification support
- AT91 SAMA7G5 SoC ID driver
- AT91 SoC driver cleanups
- Broadcom BCM4908 power management bus support
- Marvell mbus cleanups
- Mediatek MT8167 power domain support
- Qualcomm socinfo driver support for PMIC
- Qualcomm SoC identification for many more products
- TI Keystone driver cleanups for PRUSS and elsewhere"
* tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits)
soc: aspeed: socinfo: Add new systems
soc: aspeed: snoop: Add clock control logic
memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
memory: samsung: exynos5422-dmc: Correct function names in kerneldoc
memory: ti-emif-pm: Drop of_match_ptr from of_device_id table
optee: simplify i2c access
drivers: soc: atmel: fix type for same7
tee: optee: remove need_resched() before cond_resched()
soc: qcom: ocmem: don't return NULL in of_get_ocmem
optee: sync OP-TEE headers
tee: optee: fix 'physical' typos
drivers: optee: use flexible-array member instead of zero-length array
tee: fix some comment typos in header files
soc: ti: k3-ringacc: Use of_device_get_match_data()
soc: ti: pruss: Refactor the CFG sub-module init
soc: mediatek: pm-domains: Don't print an error if child domain is deferred
soc: mediatek: pm-domains: Add domain regulator supply
dt-bindings: power: Add domain regulator supply
soc: mediatek: cmdq: Remove cmdq_pkt_flush()
soc: mediatek: pm-domains: Add support for mt8167
...
|
|
All coreboot drivers return 0 unconditionally in their remove callback.
Also the device core ignores the return value of the struct
bus_type::remove(), so make the coreboot remove callback return void
instead of giving driver authors the illusion they could return an error
code here.
All drivers are adapted accordingly.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210126215339.706021-1-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SCM calls QCOM_SCM_ES_INVALIDATE_ICE_KEY and
QCOM_SCM_ES_CONFIG_SET_ICE_KEY are also needed for eMMC inline
encryption support, not just for UFS. Update the comments accordingly.
Reviewed-by: Satya Tangirala <satyat@google.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210125183810.198008-7-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Borislav Petkov:
"A single fix from Lukas: handle boolean device properties imported
from Apple firmware correctly"
* tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/apple-properties: Reinstate support for boolean properties
|
|
The ARM DEN0098 document describe an SMCCC based firmware service to
deliver hardware generated random numbers. Its existence is advertised
according to the SMCCC v1.1 specification.
Add a (dummy) call to probe functions implemented in each architecture
(ARM and arm64), to determine the existence of this interface.
For now this return false, but this will be overwritten by each
architecture's support patch.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently the EFI stub prints a diagnostic on boot saying that KASLR will
be disabled if it is unable to use the EFI RNG protocol to obtain a seed
for KASLR. With the addition of support for v8.5-RNG and the SMCCC RNG
protocol it is now possible for KASLR to obtain entropy even if the EFI
RNG protocol is unsupported in the system, and the main kernel now
explicitly says if KASLR is active itself. This can result in a boot
log where the stub says KASLR has been disabled and the main kernel says
that it is enabled which is confusing for users.
Remove the explicit reference to KASLR from the diagnostics, the warnings
are still useful as EFI is the only source of entropy the stub uses when
randomizing the physical address of the kernel and the other sources may
not be available.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210120163810.14973-1-broonie@kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Move TPM related definitions that are only used in the EFI stub into
efistub.h, which is a local header.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
efi_tcg2_protocol::get_event_log() takes a protocol pointer as the
first argument, not a EFI handle.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Fix build error in firmware/imx/ selecting SOC_BUS.
riscv32-linux-ld: drivers/firmware/imx/imx-scu-soc.o: in function `.L9':
imx-scu-soc.c:(.text+0x1b0): undefined reference to `soc_device_register'
Fixes: edbee095fafb ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
With CONFIG_LTO_CLANG, we produce LLVM bitcode instead of ELF object
files. Since LTO is not really needed here and the Makefile assumes we
produce an object file, disable LTO for libstub.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-13-samitolvanen@google.com
|
|
Call scmi_notification_exit() only when SCMI platform driver instance has
been really successfully removed.
Link: https://lore.kernel.org/r/20210112191326.29091-1-cristian.marussi@arm.com
Fixes: 6b8a69131dc63 ("firmware: arm_scmi: Enable notification core")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: Move the call outside the list mutex locking]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The SMC/HVC SCMI transport is modified to allow the completion of an
SCMI message to be indicated by an interrupt rather than the return of
the smc/hvc call. This accommodates the existing behavior of the
BrcmSTB SCMI "platform".
Link: https://lore.kernel.org/r/20201222145603.40192-3-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
[sudeep.holla: added call to reinit_completion, whitespace cleanup, dropped
irrelavant info in the commit log]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Since commit 4466bf82821b ("efi/apple-properties: use
PROPERTY_ENTRY_U8_ARRAY_LEN"), my MacBook Pro issues a -ENODATA error
when trying to assign EFI properties to the discrete GPU:
pci 0000:01:00.0: assigning 56 device properties
pci 0000:01:00.0: error -61 assigning properties
That's because some of the properties have no value. They're booleans
whose presence can be checked by drivers, e.g. "use-backlight-blanking".
Commit 6e98503dba64 ("efi/apple-properties: Remove redundant attribute
initialization from unmarshal_key_value_pairs()") employed a trick to
store such booleans as u8 arrays (which is the data type used for all
other EFI properties on Macs): It cleared the property_entry's
"is_array" flag, thereby denoting that the value is stored inline in the
property_entry.
Commit 4466bf82821b erroneously removed that trick. It was probably a
little fragile to begin with.
Reinstate support for boolean properties by explicitly invoking the
PROPERTY_ENTRY_BOOL() initializer for properties with zero-length value.
Fixes: 4466bf82821b ("efi/apple-properties: use PROPERTY_ENTRY_U8_ARRAY_LEN")
Cc: <stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/be958bda75331a011d53c696d1deec8dccd06fd2.1609388549.git.lukas@wunner.de
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
|
|
Pull KVM updates from Paolo Bonzini:
"Much x86 work was pushed out to 5.12, but ARM more than made up for it.
ARM:
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
s390:
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
x86:
- Tracepoints for the new pagetable code from 5.10
- Catch VFIO and KVM irqfd events before userspace
- Reporting dirty pages to userspace with a ring buffer
- SEV-ES host support
- Nested VMX support for wait-for-SIPI activity state
- New feature flag (AVX512 FP16)
- New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
- Selftest improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: SVM: fix 32-bit compilation
KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting
KVM: SVM: Provide support to launch and run an SEV-ES guest
KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
KVM: SVM: Provide support for SEV-ES vCPU loading
KVM: SVM: Provide support for SEV-ES vCPU creation/loading
KVM: SVM: Update ASID allocation to support SEV-ES guests
KVM: SVM: Set the encryption mask for the SVM host save area
KVM: SVM: Add NMI support for an SEV-ES guest
KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
KVM: SVM: Do not report support for SMM for an SEV-ES guest
KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
KVM: SVM: Add support for EFER write traps for an SEV-ES guest
KVM: SVM: Support string IO operations for an SEV-ES guest
KVM: SVM: Support MMIO for an SEV-ES guest
KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
KVM: SVM: Create trace events for VMGEXIT processing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a quiet release for the regulator API, a few new drivers
and the usual fixes and cleanup traffic but not much else going on:
- Optimisations for the handling of voltage enumeration, especially
with sparse selector sets, from Claudiu Beznea.
- Support for several ARM SCMI regulators, Dialog DA9121, NXP PF8x00,
Qualcomm PMX55, PM8350 and PM8350c
The addition of the SCMI regulator driver (which controls regulators
via system firmware) means that we've pulled in the support for the
underlying firmware operations from the firmware tree"
* tag 'regulator-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (53 commits)
regulator: mc13892-regulator: convert comma to semicolon
regulator: pfuze100: Convert the driver to DT-only
regulator: max14577: Add proper module aliases strings
regulator: da9121: Potential Oops in da9121_assign_chip_model()
regulator: da9121: Fix index used for DT property
regulator: da9121: Remove uninitialised string variable
regulator: axp20x: Fix DLDO2 voltage control register mask for AXP22x
regulator: qcom-rpmh: Add support for PM8350/PM8350c
regulator: dt-bindings: Add PM8350x compatibles
regulator: da9121: include linux/gpio/consumer.h
regulator: da9121: Mark some symbols with static keyword
regulator: da9121: Request IRQ directly and free in release function to avoid masking race
regulator: da9121: add interrupt support
regulator: da9121: add mode support
regulator: da9121: add current support
regulator: da9121: Update registration to support multiple buck variants
regulator: da9121: Add support for device variants via devicetree
regulator: da9121: Add device variant descriptors
regulator: da9121: Add device variant regmaps
regulator: da9121: Add device variants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big char/misc driver update for 5.11-rc1.
Continuing the tradition of previous -rc1 pulls, there seems to be
more and more tiny driver subsystems flowing through this tree.
Lots of different things, all of which have been in linux-next for a
while with no reported issues:
- extcon driver updates
- habannalab driver updates
- mei driver updates
- uio driver updates
- binder fixes and features added
- soundwire driver updates
- mhi bus driver updates
- phy driver updates
- coresight driver updates
- fpga driver updates
- speakup driver updates
- slimbus driver updates
- various small char and misc driver updates"
* tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits)
extcon: max77693: Fix modalias string
extcon: fsa9480: Support TI TSU6111 variant
extcon: fsa9480: Rewrite bindings in YAML and extend
dt-bindings: extcon: add binding for TUSB320
extcon: Add driver for TI TUSB320
slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()
siox: Make remove callback return void
siox: Use bus_type functions for probe, remove and shutdown
spmi: Add driver shutdown support
spmi: fix some coding style issues at the spmi core
spmi: get rid of a warning when built with W=1
uio: uio_hv_generic: use devm_kzalloc() for private data alloc
uio: uio_fsl_elbc_gpcm: use device-managed allocators
uio: uio_aec: use devm_kzalloc() for uio_info object
uio: uio_cif: use devm_kzalloc() for uio_info object
uio: uio_netx: use devm_kzalloc() for or uio_info object
uio: uio_mf624: use devm_kzalloc() for uio_info object
uio: uio_sercos3: use device-managed functions for simple allocs
uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers
uio: uio_dmem_genirq: convert simple allocations to device-managed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big driver core updates for 5.11-rc1
This time there was a lot of different work happening here for some
reason:
- redo of the fwnode link logic, speeding it up greatly
- auxiliary bus added (this was a tag that will be pulled in from
other trees/maintainers this merge window as well, as driver
subsystems started to rely on it)
- platform driver core cleanups on the way to fixing some long-time
api updates in future releases
- minor fixes and tweaks.
All have been in linux-next with no (finally) reported issues. Testing
there did helped in shaking issues out a lot :)"
* tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
driver core: platform: don't oops in platform_shutdown() on unbound devices
ACPI: Use fwnode_init() to set up fwnode
misc: pvpanic: Replace OF headers by mod_devicetable.h
misc: pvpanic: Combine ACPI and platform drivers
usb: host: sl811: Switch to use platform_get_mem_or_io()
vfio: platform: Switch to use platform_get_mem_or_io()
driver core: platform: Introduce platform_get_mem_or_io()
dyndbg: fix use before null check
soc: fix comment for freeing soc_dev_attr
driver core: platform: use bus_type functions
driver core: platform: change logic implementing platform_driver_probe
driver core: platform: reorder functions
driver core: make driver_probe_device() static
driver core: Fix a couple of typos
driver core: Reorder devices on successful probe
driver core: Delete pointless parameter in fwnode_operations.add_links
driver core: Refactor fw_devlink feature
efi: Update implementation of add_links() to create fwnode links
of: property: Update implementation of add_links() to create fwnode links
driver core: Use device's fwnode to check if it is waiting for suppliers
...
|
|
Merge misc updates from Andrew Morton:
- a few random little subsystems
- almost all of the MM patches which are staged ahead of linux-next
material. I'll trickle to post-linux-next work in as the dependents
get merged up.
Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
mm: cleanup kstrto*() usage
mm: fix fall-through warnings for Clang
mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
mm:backing-dev: use sysfs_emit in macro defining functions
mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
mm: use sysfs_emit for struct kobject * uses
mm: fix kernel-doc markups
zram: break the strict dependency from lzo
zram: add stat to gather incompressible pages since zram set up
zram: support page writeback
mm/process_vm_access: remove redundant initialization of iov_r
mm/zsmalloc.c: rework the list_add code in insert_zspage()
mm/zswap: move to use crypto_acomp API for hardware acceleration
mm/zswap: fix passing zero to 'PTR_ERR' warning
mm/zswap: make struct kernel_param_ops definitions const
userfaultfd/selftests: hint the test runner on required privilege
userfaultfd/selftests: fix retval check for userfaultfd_open()
userfaultfd/selftests: always dump something in modes
userfaultfd: selftests: make __{s,u}64 format specifiers portable
...
|
|
Since commit 70e806e4e645 ("mm: Do early cow for pinned pages during
fork() for ptes") pages under a FOLL_PIN will not be write protected
during COW for fork. This means that pages returned from
pin_user_pages(FOLL_WRITE) should not become write protected while the pin
is active.
However, there is a small race where get_user_pages_fast(FOLL_PIN) can
establish a FOLL_PIN at the same time copy_present_page() is write
protecting it:
CPU 0 CPU 1
get_user_pages_fast()
internal_get_user_pages_fast()
copy_page_range()
pte_alloc_map_lock()
copy_present_page()
atomic_read(has_pinned) == 0
page_maybe_dma_pinned() == false
atomic_set(has_pinned, 1);
gup_pgd_range()
gup_pte_range()
pte_t pte = gup_get_pte(ptep)
pte_access_permitted(pte)
try_grab_compound_head()
pte = pte_wrprotect(pte)
set_pte_at();
pte_unmap_unlock()
// GUP now returns with a write protected page
The first attempt to resolve this by using the write protect caused
problems (and was missing a barrrier), see commit f3c64eda3e50 ("mm: avoid
early COW write protect games during fork()")
Instead wrap copy_p4d_range() with the write side of a seqcount and check
the read side around gup_pgd_range(). If there is a collision then
get_user_pages_fast() fails and falls back to slow GUP.
Slow GUP is safe against this race because copy_page_range() is only
called while holding the exclusive side of the mmap_lock on the src
mm_struct.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lore.kernel.org/r/CAHk-=wi=iCnYCARbPGjkVJu9eyYeZ13N64tZYLdOB8CP5Q_PLw@mail.gmail.com
Link: https://lkml.kernel.org/r/2-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Fixes: f3c64eda3e50 ("mm: avoid early COW write protect games during fork()")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: "Ahmed S. Darwish" <a.darwish@linutronix.de> [seqcount_t parts]
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* pm-cpufreq: (31 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
cpufreq: arm_scmi: Discover the power scale in performance protocol
firmware: arm_scmi: Add power_scale_mw_get() interface
cpufreq: tegra194: Rename tegra194_get_speed_common function
cpufreq: tegra194: Remove unnecessary frequency calculation
cpufreq: tegra186: Simplify cluster information lookup
cpufreq: tegra186: Fix sparse 'incorrect type in assignment' warning
cpufreq: imx: fix NVMEM_IMX_OCOTP dependency
cpufreq: vexpress-spc: Add missing MODULE_ALIAS
cpufreq: scpi: Add missing MODULE_ALIAS
cpufreq: loongson1: Add missing MODULE_ALIAS
cpufreq: sun50i: Add missing MODULE_DEVICE_TABLE
cpufreq: st: Add missing MODULE_DEVICE_TABLE
cpufreq: qcom: Add missing MODULE_DEVICE_TABLE
cpufreq: mediatek: Add missing MODULE_DEVICE_TABLE
cpufreq: highbank: Add missing MODULE_DEVICE_TABLE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Expose tag address bits in siginfo. The original arm64 ABI did not
expose any of the bits 63:56 of a tagged address in siginfo. In the
presence of user ASAN or MTE, this information may be useful. The
implementation is generic to other architectures supporting tags
(like SPARC ADI, subject to wiring up the arch code). The user will
have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra
bits, if available, become visible in si_addr.
- Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
detriment of other platforms. With these changes, the kernel scans
the Device Tree dma-ranges and the ACPI IORT information before
deciding on a smaller ZONE_DMA.
- Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
with LTO, there is an increased risk of the compiler converting an
address dependency headed by a READ_ONCE() invocation into a control
dependency and consequently allowing for harmful reordering by the
CPU.
- Add CPPC FFH support using arm64 AMU counters.
- set_fs() removal on arm64. This renders the User Access Override
(UAO) ARMv8 feature unnecessary.
- Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
identifier file for SMMUv3, stop event counters support for i.MX8MP,
enable the perf events-based hard lockup detector.
- Reorganise the kernel VA space slightly so that 52-bit VA
configurations can use more virtual address space.
- Improve the robustness of the arm64 memory offline event notifier.
- Pad the Image header to 64K following the EFI header definition
updated recently to increase the section alignment to 64K.
- Support CONFIG_CMDLINE_EXTEND on arm64.
- Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
bits for PtrAuth.
- Switch to vmapped shadow call stacks.
- Miscellaneous clean-ups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
perf/imx_ddr: Add system PMU identifier for userspace
bindings: perf: imx-ddr: add compatible string
arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mark __system_matches_cap as __maybe_unused
arm64: uaccess: remove vestigal UAO support
arm64: uaccess: remove redundant PAN toggling
arm64: uaccess: remove addr_limit_user_check()
arm64: uaccess: remove set_fs()
arm64: uaccess cleanup macro naming
arm64: uaccess: split user/kernel routines
arm64: uaccess: refactor __{get,put}_user
arm64: uaccess: simplify __copy_user_flushcache()
arm64: uaccess: rename privileged uaccess routines
arm64: sdei: explicitly simulate PAN/UAO entry
arm64: sdei: move uaccess logic to arch/arm64/
arm64: head.S: always initialize PSTATE
arm64: head.S: cleanup SCTLR_ELx initialization
arm64: head.S: rename el2_setup -> init_kernel_el
arm64: add C wrappers for SET_PSTATE_*()
...
|
