summaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)Author
2022-03-04sysfb: Enable boot time VESA graphic mode selectionMichal Suchanek
Since switch to simplefb/simpledrm VESA graphic mode selection with vga= kernel parameter is no longer available with legacy BIOS. The x86 realmode boot code enables the VESA graphic modes when option FB_BOOT_VESA_SUPPORT is enabled. This option is selected by vesafb but not simplefb/simpledrm. To enable use of VESA modes with simplefb in legacy BIOS boot mode drop dependency of BOOT_VESA_SUPPORT on FB, also drop the FB_ prefix. Select the option from sysfb rather than the drivers that depend on it. The BOOT_VESA_SUPPORT is not specific to framebuffer but rather to x86 platform, move it from fbdev to x86 Kconfig. Fixes: e3263ab389a7 ("x86: provide platform-devices for boot-framebuffers") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/948c39940a4e99f5b43bdbcbe537faae71a43e1d.1645822213.git.msuchanek@suse.de
2022-03-04sysfb: Make config option dependencies explicitMichal Suchanek
efifb and vesafb requires sysfb implicitly but this is not stated in Kconfig. Add the dependency. With that all drivers that require sysfb depend on it so it can default to disabled. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/a0fa41e9186653e4c41ad0a28259e5cdc71b1f66.1645822213.git.msuchanek@suse.de
2022-03-03ACPI: APEI: explicit init of HEST and GHES in apci_init()Shuai Xue
From commit e147133a42cb ("ACPI / APEI: Make hest.c manage the estatus memory pool") was merged, ghes_init() relies on acpi_hest_init() to manage the estatus memory pool. On the other hand, ghes_init() relies on sdei_init() to detect the SDEI version and (un)register events. The dependencies are as follows: ghes_init() => acpi_hest_init() => acpi_bus_init() => acpi_init() ghes_init() => sdei_init() HEST is not PCI-specific and initcall ordering is implicit and not well-defined within a level. Based on above, remove acpi_hest_init() from acpi_pci_root_init() and convert ghes_init() and sdei_init() from initcalls to explicit calls in the following order: acpi_hest_init() ghes_init() sdei_init() Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-03firmware: xilinx: Add ZynqMP SHA API for SHA3 functionalityHarsha
This patch adds zynqmp_pm_sha_hash API in the ZynqMP firmware to compute SHA3 hash of given data. Signed-off-by: Harsha <harsha.harsha@xilinx.com> Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-01Merge tag 'qcom-drivers-for-5.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.18 This refactors the Qualcomm mdt file loader, to partially decouple it from the SCM peripheral-authentication-service. This is needed as newer platforms, such as the Qualcomm SM8450, require the metadata to remain accessible to TrustZone during a longer time. This is followed by the introduction of remoteproc drivers for SM8450 (Snapdragon 8 Gen 1). It changes the way hardware version differences are handled in the LLCC driver and introduces support for Qualcomm SM8450. While updating the dt binding for LLCC it also introduces the missing SM8350 compatible. The ocmem and aoss drivers gains missing put_device() calls and rpmpd gains a missing check for kcalloc() failure. The SPM driver is updated to avoid instantiating the SPM cpuidle devices if the CPUs aren't controlled by SPM, such as when Snapdragon 8916 operates in 32-bit mode without PSCI. The RPM power-domain driver gains MSM8226 support. Lastly the socinfo driver gains knowledge about a few new SoCs and PMICs. * tag 'qcom-drivers-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (37 commits) soc: qcom: rpmpd: Add MSM8226 support dt-bindings: power: rpmpd: Add MSM8226 to rpmpd binding soc: qcom: mdt_loader: Fix split-firmware condition dt-bindings: arm: msm: Add LLCC compatible for SM8450 dt-bindings: arm: msm: Add LLCC compatible for SM8350 soc: qcom: llcc: Add configuration data for SM8450 SoC soc: qcom: llcc: Update register offsets for newer LLCC HW soc: qcom: llcc: Add missing llcc configuration data soc: qcom: llcc: Add write-cache cacheable support soc: qcom: llcc: Update the logic for version info extraction soc: qcom: llcc: Add support for 16 ways of allocation soc: qcom: socinfo: Add some more PMICs and SoCs firmware: qcom: scm: Add support for MC boot address API firmware: qcom: scm: Drop cpumask parameter from set_boot_addr() firmware: qcom: scm: Simplify set_cold/warm_boot_addr() cpuidle: qcom-spm: Check if any CPU is managed by SPM remoteproc: qcom: pas: Add SM8450 remoteproc support dt-bindings: remoteproc: qcom: pas: Add SM8450 PAS compatibles remoteproc: qcom: pas: Carry PAS metadata context soc: qcom: mdt_loader: Extract PAS operations ... Link: https://lore.kernel.org/r/20220301042055.1804859-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-01efi: fix return value of __setup handlersRandy Dunlap
When "dump_apple_properties" is used on the kernel boot command line, it causes an Unknown parameter message and the string is added to init's argument strings: Unknown kernel command line parameters "dump_apple_properties BOOT_IMAGE=/boot/bzImage-517rc6 efivar_ssdt=newcpu_ssdt", will be passed to user space. Run /sbin/init as init process with arguments: /sbin/init dump_apple_properties with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc6 efivar_ssdt=newcpu_ssdt Similarly when "efivar_ssdt=somestring" is used, it is added to the Unknown parameter message and to init's environment strings, polluting them (see examples above). Change the return value of the __setup functions to 1 to indicate that the __setup options have been handled. Fixes: 58c5475aba67 ("x86/efi: Retrieve and assign Apple device properties") Fixes: 475fb4e8b2f4 ("efi / ACPI: load SSTDs from EFI variables") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Ard Biesheuvel <ardb@kernel.org> Cc: linux-efi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Link: https://lore.kernel.org/r/20220301041851.12459-1-rdunlap@infradead.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-02-28Merge tag 'soc-fixes-5.17-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "The code changes address mostly minor problems: - Several NXP/FSL SoC driver fixes, addressing issues with error handling and compilation - Fix a clock disabling imbalance in gpcv2 driver. - Arm Juno DMA coherency issue - Trivial firmware driver fixes for op-tee and scmi firmware The remaining changes address issues in the devicetree files: - A timer regression for the OMAP devkit8000, which has to use the alternative timer. - A hang in the i.MX8MM power domain configuration - Multiple fixes for the Rockchip RK3399 addressing issues with sound and eMMC - Cosmetic fixes for i.MX8ULP, RK3xxx, and Tegra124" * tag 'soc-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: tegra: Move panels to AUX bus soc: imx: gpcv2: Fix clock disabling imbalance in error path soc: fsl: qe: Check of ioremap return value soc: fsl: qe: fix typo in a comment soc: fsl: guts: Add a missing memory allocation failure check soc: fsl: guts: Revert commit 3c0d64e867ed soc: fsl: Correct MAINTAINERS database (SOC) soc: fsl: Correct MAINTAINERS database (QUICC ENGINE LIBRARY) soc: fsl: Replace kernel.h with the necessary inclusions dt-bindings: fsl,layerscape-dcfg: add missing compatible for lx2160a dt-bindings: qoriq-clock: add missing compatible for lx2160a ARM: dts: Use 32KiHz oscillator on devkit8000 ARM: dts: switch timer config to common devkit8000 devicetree tee: optee: fix error return code in probe function arm64: dts: imx8ulp: Set #thermal-sensor-cells to 1 as required arm64: dts: imx8mm: Fix VPU Hanging ARM: dts: rockchip: fix a typo on rk3288 crypto-controller ARM: dts: rockchip: reorder rk322x hmdi clocks firmware: arm_scmi: Remove space in MODULE_ALIAS name arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg" ...
2022-02-28Merge tag 'ti-driver-soc-for-v5.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/drivers TI Driver updates for v5.18 * Fixups for k3-ringacc, smartreflex, tisci, wkup_m3_ipc * Device detection for am62x. * tag 'ti-driver-soc-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: soc: ti: k3-socinfo: Add AM62x JTAG ID soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe firmware: ti_sci: inproper error handling of ti_sci_probe firmware: ti_sci: Fix compilation failure when CONFIG_TI_SCI_PROTOCOL is not defined soc: ti: smartreflex: Use platform_get_irq_optional() to get the interrupt soc: ti: k3-ringacc: Use devm_bitmap_zalloc() when applicable Link: https://lore.kernel.org/r/20220228120655.wobd72acngl2bz6k@ecard Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-28efivars: Respect "block" flag in efivar_entry_set_safe()Jann Horn
When the "block" flag is false, the old code would sometimes still call check_var_size(), which wrongly tells ->query_variable_store() that it can block. As far as I can tell, this can't really materialize as a bug at the moment, because ->query_variable_store only does something on X86 with generic EFI, and in that configuration we always take the efivar_entry_set_nonblocking() path. Fixes: ca0e30dcaa53 ("efi: Add nonblocking option to efi_query_variable_store()") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220218180559.1432559-1-jannh@google.com
2022-02-28riscv/efi_stub: Fix get_boot_hartid_from_fdt() return valueSunil V L
The get_boot_hartid_from_fdt() function currently returns U32_MAX for failure case which is not correct because U32_MAX is a valid hartid value. This patch fixes the issue by returning error code. Cc: <stable@vger.kernel.org> Fixes: d7071743db31 ("RISC-V: Add EFI stub support.") Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-02-25Merge tag 'scmi-updates-5.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers Arm SCMI firmware interface updates for v5.18 Few main additions include: - Support for OPTEE based SCMI transport to enable using SCMI service provided by OPTEE on some platforms - Support for atomic SCMI transports which enables few SCMI transactions to be completed in atomic context. This involves other refactoring work associated with it. It also marks SMC and OPTEE as atomic transport as the commands are completed once the return. - Support for polling mode in SCMI VirtIO transport in order to support atomic operations - Support for atomic clock operations based on availability of atomic capability in the underlying SCMI transport Other changes involves some trace and log enhancements and miscellaneous bug fixes. * tag 'scmi-updates-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (28 commits) clk: scmi: Support atomic clock enable/disable API firmware: arm_scmi: Add support for clock_enable_latency firmware: arm_scmi: Add atomic support to clock protocol firmware: arm_scmi: Support optional system wide atomic-threshold-us dt-bindings: firmware: arm,scmi: Add atomic-threshold-us optional property firmware: arm_scmi: Add atomic mode support to virtio transport firmware: arm_scmi: Review virtio free_list handling firmware: arm_scmi: Add a virtio channel refcount firmware: arm_scmi: Disable ftrace for Clang Thumb2 builds firmware: arm_scmi: Add new parameter to mark_txdone firmware: arm_scmi: Add atomic mode support to smc transport firmware: arm_scmi: Add support for atomic transports firmware: arm_scmi: Make optee support sync_cmds_completed_on_ret firmware: arm_scmi: Make smc support sync_cmds_completed_on_ret firmware: arm_scmi: Add sync_cmds_completed_on_ret transport flag firmware: arm_scmi: Make smc transport use common completions firmware: arm_scmi: Add configurable polling mode for transports firmware: arm_scmi: Use new trace event scmi_xfer_response_wait include: trace: Add new scmi_xfer_response_wait event firmware: arm_scmi: Refactor message response path ... Link: https://lore.kernel.org/r/20220222201742.3338589-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-25Merge tag 'imx-drivers-5.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers update for 5.18: - Drop LS1021A device check from soc-imx driver as it's unneeded since commit commit 4ebd29f91629 ("soc: imx: Register SoC device only on i.MX boards"). - Add support for power domains provided by the VPU blk-ctrl on the i.MX8MQ. - Add resource owner management API which will be used to check whether M4 is under control of Linux. - Add VPU MU resources support into SCU power domain driver. - Support DT overlay for WEIM bus driver with OF reconfiguration notifier handler. * tag 'imx-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: bus: imx-weim: add DT overlay support for WEIM bus firmware: imx: scu-pd: imx8q: add vpu mu resources firmware: imx: add get resource owner api soc: imx: imx8m-blk-ctrl: add i.MX8MQ VPU blk-ctrl dt-bindings: power: imx8mq: add defines for VPU blk-ctrl domains soc: imx: Remove Layerscape check Link: https://lore.kernel.org/r/20220222075226.160187-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-25firmware: xilinx: Add sysfs support for feature configRonak Jain
Add support for sysfs interface for runtime features configuration. The user can configure the features at runtime. First, the user need to select the config id of the supported features and then the user can configure the parameters of the feature based on the config id. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ronak Jain <ronak.jain@xilinx.com> Link: https://lore.kernel.org/r/20220209082709.32378-4-ronak.jain@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-25firmware: xilinx: Add support for runtime featuresRonak Jain
Add support for runtime features by using an IOCTL call. The features can be enabled or disabled from the firmware as well as the features can be configured at runtime by querying IOCTL_SET_FEATURE_CONFIG id. Similarly, the user can get the configured values of features by querying IOCTL_GET_FEATURE_CONFIG id. Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ronak Jain <ronak.jain@xilinx.com> Link: https://lore.kernel.org/r/20220209082709.32378-2-ronak.jain@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-25firmware: stratix10-svc: extend SVC driver to get the firmware versionRichard Gong
Extend Intel service layer driver to get the firmware version running at FPGA device. Therefore FPGA manager driver, one of Intel service layer driver's client, can decide whether to handle the newly added bitstream authentication function based on the retrieved firmware version. Link: https://lore.kernel.org/lkml/1617114785-22211-2-git-send-email-richard.gong@linux.intel.com Acked-by: Moritz Fischr <mdf@kernel.org> Signed-off-by: Richard Gong <richard.gong@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20220223144908.399522-2-dinguyen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-21firmware: arm_scmi: Add support for clock_enable_latencyCristian Marussi
An SCMI platform can optionally advertise an enable latency typically associated with a specific clock resource: add support for parsing such optional message field and export such information in the usual publicly accessible clock descriptor. Link: https://lore.kernel.org/r/20220217131234.50328-8-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-21firmware: arm_scmi: Add atomic support to clock protocolCristian Marussi
Introduce new _atomic variant for SCMI clock protocol operations related to enable disable operations: when an atomic operation is required the xfer poll_completion flag is set for that transaction. Link: https://lore.kernel.org/r/20220217131234.50328-7-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-21firmware: arm_scmi: Support optional system wide atomic-threshold-usCristian Marussi
An SCMI agent can be configured system-wide with a well-defined atomic threshold: only SCMI synchronous command whose latency has been advertised by the SCMI platform to be lower or equal to this configured threshold will be considered for atomic operations, when requested and if supported by the underlying transport at all. Link: https://lore.kernel.org/r/20220217131234.50328-6-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-21firmware: arm_scmi: Add atomic mode support to virtio transportCristian Marussi
Add support for .mark_txdone and .poll_done transport operations to SCMI VirtIO transport as pre-requisites to enable atomic operations. Add a Kernel configuration option to enable SCMI VirtIO transport polling and atomic mode for selected SCMI transactions while leaving it default disabled. Link: https://lore.kernel.org/r/20220217131234.50328-4-cristian.marussi@arm.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Skalkin <igor.skalkin@opensynergy.com> Cc: Peter Hilber <peter.hilber@opensynergy.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-21firmware: arm_scmi: Review virtio free_list handlingCristian Marussi
Add a new spinlock dedicated to the access of the TX free list and a couple of helpers to get and put messages back and forth from the free_list. Link: https://lore.kernel.org/r/20220217131234.50328-3-cristian.marussi@arm.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Skalkin <igor.skalkin@opensynergy.com> Cc: Peter Hilber <peter.hilber@opensynergy.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-21firmware: arm_scmi: Add a virtio channel refcountCristian Marussi
Currently SCMI VirtIO channels are marked with a ready flag and related lock to track channel lifetime and support proper synchronization at shutdown when virtqueues have to be stopped. This leads to some extended spinlocked sections with IRQs off on the RX path to keep hold of the ready flag and does not scale well especially when SCMI VirtIO polling mode will be introduced. Add an SCMI VirtIO channel dedicated refcount to track active users on both the TX and the RX path and properly enforce synchronization and cleanup at shutdown, inhibiting further usage of the channel once freed. Link: https://lore.kernel.org/r/20220217131234.50328-2-cristian.marussi@arm.com Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Skalkin <igor.skalkin@opensynergy.com> Cc: Peter Hilber <peter.hilber@opensynergy.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-20firmware: imx: scu-pd: imx8q: add vpu mu resourcesMing Qian
the vpu core depends on the mu resources. if they're missed, the vpu can't work. Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Shijie Qin <shijie.qin@nxp.com> Signed-off-by: Zhou Peng <eagle.zhou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-18Merge tag 'scmi-fix-5.17' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fix for v5.17 A simple fix to remove space in the MODULE_ALIAS name used in the SCMI driver as userspace expect no spaces in these names. * tag 'scmi-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Remove space in MODULE_ALIAS name Link: https://lore.kernel.org/r/20220214144245.2376150-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-02-12firmware: imx: add get resource owner apiPeng Fan
Add resource owner management API, this API could be used to check whether M4 is under control of Linux. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-02-11firmware: arm_scmi: Remove space in MODULE_ALIAS nameAlyssa Ross
modprobe can't handle spaces in aliases. Get rid of it to fix the issue. Link: https://lore.kernel.org/r/20220211102704.128354-1-sudeep.holla@arm.com Fixes: aa4f886f3893 ("firmware: arm_scmi: add basic driver infrastructure for SCMI") Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Alyssa Ross <hi@alyssa.is> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-08firmware: arm_scmi: Disable ftrace for Clang Thumb2 buildsArd Biesheuvel
The SMC calling convention designates R0-R7 as input registers in AArch32 mode, and this conflicts with the compiler's use of R7 as a frame pointer when building in Thumb2 mode. Generally, we don't enable the frame pointer, and GCC happily enables the -pg profiling hooks without them. However, Clang refuses, and errors out with the message below: drivers/firmware/arm_scmi/smc.c:152:2: error: write to reserved register 'R7' arm_smccc_1_1_invoke(scmi_info->func_id, 0, 0, 0, 0, 0, 0, 0, &res); ^ include/linux/arm-smccc.h:550:4: note: expanded from macro 'arm_smccc_1_1_invoke' arm_smccc_1_1_smc(__VA_ARGS__); \ ^ Let's just disable ftrace for the compilation unit when building this configuration. Link: https://lore.kernel.org/r/20220203082204.1176734-11-ardb@kernel.org Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-02-07Merge tag 'scmi-updates-5.17' of ↵Sudeep Holla
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into for-next/scmi Arm SCMI firmware interface updates for v5.17 Couple of main additions: - Support for OPTEE based SCMI transport to enable using SCMI service provided by OPTEE on some platforms - Support for atomic SCMI transports which enables few SCMI transactions to be completed in atomic context. This involves other refactoring work associated with it. It also marks SMC and OPTEE as atomic transport as the commands are completed once the return Other changes involves some trace and log enhancements and a miscellaneous bug fix. * tag 'scmi-updates-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Add new parameter to mark_txdone firmware: arm_scmi: Add atomic mode support to smc transport firmware: arm_scmi: Add support for atomic transports firmware: arm_scmi: Make optee support sync_cmds_completed_on_ret firmware: arm_scmi: Make smc support sync_cmds_completed_on_ret firmware: arm_scmi: Add sync_cmds_completed_on_ret transport flag firmware: arm_scmi: Make smc transport use common completions firmware: arm_scmi: Add configurable polling mode for transports firmware: arm_scmi: Use new trace event scmi_xfer_response_wait include: trace: Add new scmi_xfer_response_wait event firmware: arm_scmi: Refactor message response path firmware: arm_scmi: Set polling timeout to max_rx_timeout_ms firmware: arm_scmi: Perform earlier cinfo lookup call in do_xfer firmware: arm_scmi: optee: Drop the support for the OPTEE shared dynamic buffer firmware: arm_scmi: optee: Fix missing mutex_init() firmware: arm_scmi: Make virtio Version_1 compliance optional firmware: arm_scmi: Add optee transport dt-bindings: arm: Add OP-TEE transport for SCMI firmware: arm_scmi: Review some virtio log messages
2022-02-03firmware: qcom: scm: Add support for MC boot address APIStephan Gerhold
It looks like the old QCOM_SCM_BOOT_SET_ADDR API is broken on some MSM8916 firmware versions that implement the newer SMC32 calling convention. It just returns -EINVAL no matter which arguments are being passed. This does not cause any problems downstream because it first tries to use the new multi-cluster API replacement which is working fine. Implement support for the multi-cluster variant of the SCM call by attempting it first but still fallback to the old call in case of an error. Also, to be absolutely sure only use the multi-cluster variant with the SMC calling convention since older platforms should not need this. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211201130505.257379-5-stephan@gerhold.net
2022-02-03firmware: qcom: scm: Drop cpumask parameter from set_boot_addr()Stephan Gerhold
qcom_scm_set_cold/warm_boot_addr() currently take a cpumask parameter, but it's not very useful because at the end we always set the same entry address for all CPUs. This also allows speeding up probe of cpuidle-qcom-spm a bit because only one SCM call needs to be made to the TrustZone firmware, instead of one per CPU. The main reason for this change is that it allows implementing the "multi-cluster" variant of the set_boot_addr() call more easily without having to rely on functions that break in certain build configurations or that are not exported to modules. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211201130505.257379-4-stephan@gerhold.net
2022-02-03firmware: qcom: scm: Simplify set_cold/warm_boot_addr()Stephan Gerhold
The qcom_scm_set_cold/warm_boot_addr() implementations have a lot of functionality that is actually not used. For example, set_warm_boot_addr() caches the last used entry address and skips making the SCM call when the entry address is unchanged. But there is actually just a single call of qcom_scm_set_warm_boot_addr() in the whole kernel tree, which always configures the entry address to cpu_resume_arm(). Simplify this by having a single qcom_scm_set_boot_addr() function for both cold and warm boot address. This is totally sufficient for the functionality supported in the mainline tree. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211201130505.257379-3-stephan@gerhold.net
2022-02-03firmware: qcom: scm: Introduce pas_metadata contextBjorn Andersson
Starting with Qualcomm SM8450, some new security enhancements has been done in the secure world, which results in the requirement to keep the metadata segment accessible by the secure world from init_image() until auth_and_reset(). Introduce a "PAS metadata context" object that can be passed to init_image() for tracking the mapped memory and a related release function for client drivers to release the mapping once either auth_and_reset() has been invoked or in error handling paths on the way there. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220128025513.97188-2-bjorn.andersson@linaro.org
2022-02-02firmware: ti_sci: inproper error handling of ti_sci_probePeiwei Hu
goto out instead of returning directly in error exiting Signed-off-by: Peiwei Hu <jlu.hpw@foxmail.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/tencent_0D5124AF8235001703711A7A09703F918806@qq.com
2022-02-01Merge tag 'drm-misc-next-2022-01-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next [airlied: add two missing Kconfig] drm-misc-next for v5.18: UAPI Changes: - Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL. Cross-subsystem Changes: - Assorted dt bindings updates. - Fix vga16fb vga checking on x86. - Fix extra semicolon in rwsem.h's _down_write_nest_lock. - Assorted small fixes to agp and fbdev drivers. - Fix oops in creating a udmabuf with 0 pages. - Hot-unplug firmware fb devices on forced removal - Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy. Core Changes: - Mock a drm_plane in drm-plane-helper selftest. - Assorted bug fixes to device logging, dbi. - Use DP helper for sink count in mst. - Assorted documentation fixes. - Assorted small fixes. - Move DP headers to drm/dp, and add a drm dp helper module. - Move the buddy allocator from i915 to common drm. - Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers. - Support microsoft extension for HMDs and specialized monitors. - Improve edid parser's deep color handling. - Add type 7 timing support to edid parser. - Add a weak backpointer to the ttm_bo from ttm_resource - Add 3 eDP panels. Driver Changes: - Add support for HDMI and JZ4780 to ingenic. - Add support for higher DP/eDP bitrates to nouveau. - Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers. - Convert and revert exynos dsi support to bridge driver. - Add vcc supply regulator support for sn65dsi83. - More conversion of bridge/chipone-icn6211 to atomic. - Remove conflicting fb's from stm, and add support for new hw version. - Add device link in parade-ps8640 to fix suspend/resume. - Update Boe-tv110c9m init sequence. - Add wide screen support to AST2600. - Fix omapdrm implicit dma_buf fencing. - Add support for multiple overlay planes to vkms. - Convert bridge/anx7625 to atomic, add HDCP support, add eld support for audio, and fix HPD. - Add driver for ChromeOS privacy screen. - Handover display from firmware to vc4 more gracefully, and support nomodeset. - Add flexible and ycbcr pixel formats to stm/ltdc. - Convert exynos mipi dsi to atomic. - Add initial dual core group GPUs support to panfrost. - No longer add exclusive fence in amdgpu as shared fence. - Add CSC and full range supoprt to vc4. - Shutdown the display on system shutdown and unbind. - Add Multi-Inno Technology MI0700S4T-6 simple panel. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
2022-01-31firmware: qcom: scm: Fix some kernel-doc commentsYang Li
Fix qcom_scm_call(), qcom_scm_call_atomic, and qcom_scm_cpu_power_down() kernel-doc comment to remove remove warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/firmware/qcom_scm.c:191: warning: Function parameter or member 'res' not described in 'qcom_scm_call' drivers/firmware/qcom_scm.c:191: warning: Excess function parameter 'svc_id' description in 'qcom_scm_call' drivers/firmware/qcom_scm.c:191: warning: Excess function parameter 'cmd_id' description in 'qcom_scm_call' drivers/firmware/qcom_scm.c:219: warning: Excess function parameter 'svc_id' description in 'qcom_scm_call_atomic' drivers/firmware/qcom_scm.c:219: warning: Excess function parameter 'cmd_id' description in 'qcom_scm_call_atomic' drivers/firmware/qcom_scm.c:360: warning: Function parameter or member 'flags' not described in 'qcom_scm_cpu_power_down' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211230141245.29444-1-yang.lee@linux.alibaba.com
2022-01-31firmware: qcom: scm: Add function to set IOMMU pagetable addressingAngeloGioacchino Del Regno
Add a function to change the IOMMU pagetable addressing to AArch32 LPAE or AArch64. If doing that, then this must be done for each IOMMU context (not necessarily at the same time). Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> [Marijn: ported from 5.3 to the unified architecture in 5.11] Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211208083423.22037-4-marijn.suijten@somainline.org
2022-01-31firmware: qcom: scm: Add function to set the maximum IOMMU pool sizeAngeloGioacchino Del Regno
This is not necessary for basic functionality of the IOMMU, but it's an optimization that tells to the TZ what's the maximum mappable size for the secure IOMMUs, so that it can optimize the data structures in the TZ itself. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> [Marijn: ported from 5.3 to the unified architecture in 5.11] Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211208083423.22037-3-marijn.suijten@somainline.org
2022-01-31firmware: qcom: scm: Remove reassignment to desc following initializerMarijn Suijten
Member assignments to qcom_scm_desc were moved into struct initializers in 57d3b816718c ("firmware: qcom_scm: Remove thin wrappers") including the case in qcom_scm_iommu_secure_ptbl_init, except that the - now duplicate - assignment to desc was left in place. While not harmful, remove this unnecessary extra reassignment. Fixes: 57d3b816718c ("firmware: qcom_scm: Remove thin wrappers") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211208083423.22037-2-marijn.suijten@somainline.org
2022-01-27drivers/firmware: Don't mark as busy the simple-framebuffer IO resourceJavier Martinez Canillas
The sysfb_create_simplefb() function requests a IO memory resource for the simple-framebuffer platform device, but it also marks it as busy which can lead to drivers requesting the same memory resource to fail. Let's drop the IORESOURCE_BUSY flag and let drivers to request it as busy instead. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220125091222.21457-3-tzimmermann@suse.de
2022-01-23efi: runtime: avoid EFIv2 runtime services on Apple x86 machinesArd Biesheuvel
Aditya reports [0] that his recent MacbookPro crashes in the firmware when using the variable services at runtime. The culprit appears to be a call to QueryVariableInfo(), which we did not use to call on Apple x86 machines in the past as they only upgraded from EFI v1.10 to EFI v2.40 firmware fairly recently, and QueryVariableInfo() (along with UpdateCapsule() et al) was added in EFI v2.00. The only runtime service introduced in EFI v2.00 that we actually use in Linux is QueryVariableInfo(), as the capsule based ones are optional, generally not used at runtime (all the LVFS/fwupd firmware update infrastructure uses helper EFI programs that invoke capsule update at boot time, not runtime), and not implemented by Apple machines in the first place. QueryVariableInfo() is used to 'safely' set variables, i.e., only when there is enough space. This prevents machines with buggy firmwares from corrupting their NVRAMs when they run out of space. Given that Apple machines have been using EFI v1.10 services only for the longest time (the EFI v2.0 spec was released in 2006, and Linux support for the newly introduced runtime services was added in 2011, but the MacbookPro12,1 released in 2015 still claims to be EFI v1.10 only), let's avoid the EFI v2.0 ones on all Apple x86 machines. [0] https://lore.kernel.org/all/6D757C75-65B1-468B-842D-10410081A8E4@live.com/ Cc: <stable@vger.kernel.org> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Reported-by: Aditya Garg <gargaditya08@live.com> Tested-by: Orlando Chamberlain <redecorating@protonmail.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Aditya Garg <gargaditya08@live.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215277
2022-01-23efi/libstub: arm64: Fix image check alignment at entryMihai Carabas
The kernel is aligned at SEGMENT_SIZE and this is the size populated in the PE headers: arch/arm64/kernel/efi-header.S: .long SEGMENT_ALIGN // SectionAlignment EFI_KIMG_ALIGN is defined as: (SEGMENT_ALIGN > THREAD_ALIGN ? SEGMENT_ALIGN : THREAD_ALIGN) So it depends on THREAD_ALIGN. On newer builds this message started to appear even though the loader is taking into account the PE header (which is stating SEGMENT_ALIGN). Fixes: c32ac11da3f8 ("efi/libstub: arm64: Double check image alignment at entry") Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-01-19RISC-V: Introduce sv48 support without relocatable kernelPalmer Dabbelt
This patchset allows to have a single kernel for sv39 and sv48 without being relocatable. The idea comes from Arnd Bergmann who suggested to do the same as x86, that is mapping the kernel to the end of the address space, which allows the kernel to be linked at the same address for both sv39 and sv48 and then does not require to be relocated at runtime. This implements sv48 support at runtime. The kernel will try to boot with 4-level page table and will fallback to 3-level if the HW does not support it. Folding the 4th level into a 3-level page table has almost no cost at runtime. Note that kasan region had to be moved to the end of the address space since its location must be known at compile-time and then be valid for both sv39 and sv48 (and sv57 that is coming). * riscv-sv48-v3: riscv: Explicit comment about user virtual address space size riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo riscv: Implement sv48 support asm-generic: Prepare for riscv use of pud_alloc_one and pud_free riscv: Allow to dynamically define VA_BITS riscv: Introduce functions to switch pt_ops riscv: Split early kasan mapping to prepare sv48 introduction riscv: Move KASAN mapping next to the kernel mapping riscv: Get rid of MAXPHYSMEM configs Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-19riscv: Implement sv48 supportAlexandre Ghiti
By adding a new 4th level of page table, give the possibility to 64bit kernel to address 2^48 bytes of virtual address: in practice, that offers 128TB of virtual address space to userspace and allows up to 64TB of physical memory. If the underlying hardware does not support sv48, we will automatically fallback to a standard 3-level page table by folding the new PUD level into PGDIR level. In order to detect HW capabilities at runtime, we use SATP feature that ignores writes with an unsupported mode. Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
2022-01-14firmware: qemu_fw_cfg: remove sysfs entries explicitlyJohan Hovold
Explicitly remove the file entries from sysfs before dropping the final reference for symmetry reasons and for consistency with the rest of the driver. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211201132528.30025-5-johan@kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14firmware: qemu_fw_cfg: fix sysfs information leakJohan Hovold
Make sure to always NUL-terminate file names retrieved from the firmware to avoid accessing data beyond the entry slab buffer and exposing it through sysfs in case the firmware data is corrupt. Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device") Cc: stable@vger.kernel.org # 4.6 Cc: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211201132528.30025-4-johan@kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14firmware: qemu_fw_cfg: fix kobject leak in probe error pathJohan Hovold
An initialised kobject must be freed using kobject_put() to avoid leaking associated resources (e.g. the object name). Commit fe3c60684377 ("firmware: Fix a reference count leak.") "fixed" the leak in the first error path of the file registration helper but left the second one unchanged. This "fix" would however result in a NULL pointer dereference due to the release function also removing the never added entry from the fw_cfg_entry_cache list. This has now been addressed. Fix the remaining kobject leak by restoring the common error path and adding the missing kobject_put(). Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device") Cc: stable@vger.kernel.org # 4.6 Cc: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211201132528.30025-3-johan@kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14firmware: qemu_fw_cfg: fix NULL-pointer deref on duplicate entriesJohan Hovold
Commit fe3c60684377 ("firmware: Fix a reference count leak.") "fixed" a kobject leak in the file registration helper by properly calling kobject_put() for the entry in case registration of the object fails (e.g. due to a name collision). This would however result in a NULL pointer dereference when the release function tries to remove the never added entry from the fw_cfg_entry_cache list. Fix this by moving the list-removal out of the release function. Note that the offending commit was one of the benign looking umn.edu fixes which was reviewed but not reverted. [1][2] [1] https://lore.kernel.org/r/202105051005.49BFABCE@keescook [2] https://lore.kernel.org/all/YIg7ZOZvS3a8LjSv@kroah.com Fixes: fe3c60684377 ("firmware: Fix a reference count leak.") Cc: stable@vger.kernel.org # 5.8 Cc: Qiushi Wu <wu000273@umn.edu> Cc: Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211201132528.30025-2-johan@kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14virtio: wrap config->reset callsMichael S. Tsirkin
This will enable cleanups down the road. The idea is to disable cbs, then add "flush_queued_cbs" callback as a parameter, this way drivers can flush any work queued after callbacks have been disabled. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14Merge tag 'char-misc-5.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char, misc, and other "small" driver subsystem changes for 5.17-rc1. Lots of different things are in here for char/misc drivers such as: - habanalabs driver updates - mei driver updates - lkdtm driver updates - vmw_vmci driver updates - android binder driver updates - other small char/misc driver updates Also smaller driver subsystems have also been updated, including: - fpga subsystem updates - iio subsystem updates - soundwire subsystem updates - extcon subsystem updates - gnss subsystem updates - phy subsystem updates - coresight subsystem updates - firmware subsystem updates - comedi subsystem updates - mhi subsystem updates - speakup subsystem updates - rapidio subsystem updates - spmi subsystem updates - virtual driver updates - counter subsystem updates Too many individual changes to summarize, the shortlog contains the full details. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits) counter: 104-quad-8: Fix use-after-free by quad8_irq_handler dt-bindings: mux: Document mux-states property dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC counter: remove old and now unused registration API counter: ti-eqep: Convert to new counter registration counter: stm32-lptimer-cnt: Convert to new counter registration counter: stm32-timer-cnt: Convert to new counter registration counter: microchip-tcb-capture: Convert to new counter registration counter: ftm-quaddec: Convert to new counter registration counter: intel-qep: Convert to new counter registration counter: interrupt-cnt: Convert to new counter registration counter: 104-quad-8: Convert to new counter registration counter: Update documentation for new counter registration functions counter: Provide alternative counter registration functions counter: stm32-timer-cnt: Convert to counter_priv() wrapper counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper counter: ti-eqep: Convert to counter_priv() wrapper counter: ftm-quaddec: Convert to counter_priv() wrapper counter: intel-qep: Convert to counter_priv() wrapper counter: microchip-tcb-capture: Convert to counter_priv() wrapper ...
2022-01-14Merge tag 'sound-5.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It's a relatively calm development cycle, but still lots of updates in the driver side like Intel SOF. Below are some highlights: ALSA / ASoC core: - A new kselftest for ALSA control API - PCM NO_REWINDS support - Potential race fixes around control removals - Unify x86 SG-buffer memory allocation code - Cleanups and race fixes for ASoC DPCM locking ASoC: - Refinements and cleanups around the delay() APIs - Wider use of dev_err_probe(). - Continuing cleanups and improvements to the SOF code - Support for pin switches in simple-card derived cards - Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20 S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments TLV320ADC3xxx HD-audio / USB-audio: - Fix deadlock at HD-audio codec unbinding - Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec - Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device Misc: - Fix virmidi drain behavior Note that the merge of CS35L41 codec support is still half-baked, and at least one ACPI change is missing. Although this won't hinder the kernel build itself, we're going to catch up before RC1" * tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits) ALSA: hda: intel-dsp-config: reorder the config table ALSA: hda: intel-dsp-config: add JasperLake support ALSA: hda: cs35l41: fix double free on error in probe() ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses ALSA: hda: Fix dependency on ASoC cs35l41 codec ASoC: cs35l41: Add support for hibernate memory retention mode ASoC: cs35l41: Update handling of test key registers ALSA: intel_hdmi: Check for error num after setting mask ASoC: wcd9335: Keep a RX port value for each SLIM RX mux ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id ALSA: virmidi: Remove duplicated code ALSA: seq: virmidi: Add a drain operation ASoC: topology: Fix typo ASoC: fsl_asrc: refine the check of available clock divider ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev ASoC: rt5640: Add support for boards with an external jack-detect GPIO ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ ASoC: rt5640: Change jack_work to a delayed_work ASoC: rt5640: Fix possible NULL pointer deref on resume ...
generated by cgit (git 2.34.1) at 2025-09-14 08:22:04 +0000