| Age | Commit message (Collapse) | Author |
|---|
|
Fix couple of unnecessary multiple blank lines and spaces instead of
tabs.
No functional change.
Message-Id: <20240827143838.1465913-2-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
mbox_client_to_bpmp() is not used, W=1 builds:
drivers/firmware/tegra/bpmp.c:28:1: error: unused function 'mbox_client_to_bpmp' [-Werror,-Wunused-function]
Fixes: cdfa358b248e ("firmware: tegra: Refactor BPMP driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Currently, cper_print_pcie() only logs Uncorrectable Error Status, Mask
and Severity registers along with the TLP header.
If a correctable error is received immediately preceding or following an
Uncorrectable Fatal Error, its information is lost since Correctable
Error Status and Mask registers are not logged.
As such, to avoid skipping any possible error information, Correctable
Error Status and Mask registers should also be logged.
Additionally, ensure that AER information is also available through
cper_print_pcie() for Correctable and Uncorrectable Non-Fatal Errors.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In aperture_remove_conflicting_pci_devices(), we currently only
call sysfb_disable() on vga class devices. This leads to the
following problem when the pimary device is not VGA compatible:
1. A PCI device with a non-VGA class is the boot display
2. That device is probed first and it is not a VGA device so
sysfb_disable() is not called, but the device resources
are freed by aperture_detach_platform_device()
3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable()
4. NULL pointer dereference via sysfb_disable() since the resources
have already been freed by aperture_detach_platform_device() when
it was called by the other device.
Fix this by passing a device pointer to sysfb_disable() and checking
the device to determine if we should execute it or not.
v2: Fix build when CONFIG_SCREEN_INFO is not set
v3: Move device check into the mutex
Drop primary variable in aperture_remove_conflicting_pci_devices()
Drop __init on pci sysfb_pci_dev_is_enabled()
Fixes: 5ae3716cfdcd ("video/aperture: Only remove sysfb on the default vga pci device")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821191135.829765-1-alexander.deucher@amd.com
|
|
Add the aforementioned machines to the list to get e.g. efivars up.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Link: https://lore.kernel.org/r/20240826-topic-sl7-v2-2-c32ebae78789@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
success
After successfully programming the SPI flash with an MFPS auto update
image, the error sysfs attribute reports programming:timeout.
This is caused by an incorrect check on the return value from
wait_for_completion_timeout() in mpfs_auto_update_poll_complete().
Fixes: ec5b0f1193ad ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The Pixel 3a returns 4291821499 (-3145797 or 0xFFCFFFBB) when attempting
to load the GPU firmware if tzmem is allowed. Disable it on SDM670 so
the GPU can successfully probe.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240730013834.41840-2-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
An endpoint can discover the minimum size, maximum size and alignment
boundary for the Rx/Tx buffers by passing the function ID of the
FFA_RXTX_MAP ABI as input in the FFA_FEATURES interface. The maximum
size is an optional field and a value of 0 means that the partition
manager or the hypervisor does not enforce a maximum size.
Use the discovery mechanism and remove the hardcoded 4kB buffer size.
If the discovery fails, it still defaults to 4kB.
Message-Id: <20240820-ffa_v1-2-v2-7-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Successful completion of both direct messaging function can be indicated
through an invocation of FFA_YIELD or GGA_INTERRUPT by the callee.
FFA_INTERRUPT indicates that the direct request was interrupted and must
be resumed through the FFA_RUN interface which is already done in the
driver.
FFA_YIELD indicates that the receiver endpoint has transitioned to the
blocked runtime state and must be resumed through the FFA_RUN interface.
However, the way receiver endpoint gets unblocked is implementation
defined. So, the driver just sleeps for 1 - 2ms and issues FFA_RUN. It
can return to the caller with FFA_YIELD is the receiver endpoint is still
blocked.
Message-Id: <20240820-ffa_v1-2-v2-6-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
FFA_MSG_SEND_DIRECT_{REQ,RESP} supported only x3-x7 to pass implementation
defined values as part of the message. This may not be sufficient sometimes
and also it would be good to use all the registers supported by SMCCC v1.2
(x0-x17) for such register based communication.
Also another limitation with the FFA_MSG_SEND_DIRECT_{REQ,RESP} is the
ability to target a specific service within the partition based on it's
UUID.
In order to address both of the above limitation, FF-A v1.2 introduced
FFA_MSG_SEND_DIRECT_{REQ,RESP}2 which has the ability to target the
message to a specific service based on its UUID within a partition as
well as utilise all the available registers(x4-x17 specifically) for
the communication.
This change adds support for FFA_MSG_SEND_DIRECT_REQ2 and
FFA_MSG_SEND_DIRECT_RESP2.
Message-Id: <20240820-ffa_v1-2-v2-5-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
FF-A v1.2 introduced FFA_PARTITION_INFO_GET_REGS which is similar to
FFA_PARTITION_INFO_GET except that the former uses the registers to
get the required information instead of the Rx buffer which the latter
uses.
We need to first check if the platform supports this new API using
FFA_FEATURES so that we can fallback to the FFA_PARTITION_INFO_GET
(which is mandatory) if FFA_PARTITION_INFO_GET_REGS is not implemented.
Message-Id: <20240820-ffa_v1-2-v2-4-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
We need to use ffa_features() in ffa_partition_probe() to detect if
the newer FFA_PARTITION_INFO_GET_REGS API is supported in the platform
or not. To avoid unnecessary forward declaration within the file, let
us just move this ffa_features() earlier.
No funtional change.
Message-Id: <20240820-ffa_v1-2-v2-3-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Arm Firmware Framework for A-profile(FFA) v1.2 introduces register based
discovery mechanism and direct messaging extensions that enables to target
specific UUID within a partition.
Let us add all the newly supported FF-A function IDs in the spec.
Also update to the error values and associated handling.
Message-Id: <20240820-ffa_v1-2-v2-2-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
These changes fixes a set of below coding style issues:
1. spaces required around that '=' (ctx:VxW)
2. possible unnecessary 'out of memory' message
3. unnecessary for single statement blocks
Message-Id: <20240820-ffa_v1-2-v2-1-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Override default maximum RX timeout with the value picked from the
devicetree, when provided.
Suggested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Message-Id: <20240730144707.1647025-4-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The descriptor structure scmi_desc contains a variety of fields related to
the transport functionalities and it is defined by the transport drivers
themselves; such elements, though, serve varied purposes and have different
lifetime.
In particular, while there are some of those elements that provide a
description of transport features that are supposed to be immutable, on
the other side there are present also some other characteristics that are
instead supposed to be configurable on a per-platform base since they
represent configuration features tied to the specific hardware/firmware
system.
The immutable fields are already qualified as const on the their own; get
rid of the structure-level const qualifier which is not needed, so as to
enable possible runtime customization of the mutable configuration
features.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Message-Id: <20240730144707.1647025-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240816151407.155034-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
A few protocol versions had been increased with SCMI v3.2.
Update accordingly the supported version define in the kernel stack,
since all the mandatory base commands are indeed already supported.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812174027.3931160-1-cristian.marussi@arm.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Since all SCMI transports have been made standalone drivers, remove all the
core SCMI stack legacy support that was needed to run transports as built
into the stack.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812173340.3912830-10-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Make SCMI VirtIO transport a standalone driver that can be optionally
loaded as a module.
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Igor Skalkin <igor.skalkin@opensynergy.com>
CC: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812173340.3912830-9-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Make SCMI OPTEE transport a standalone driver that can be optionally
loaded as a module.
CC: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812173340.3912830-8-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Make SCMI SMC transport a standalone driver that can be optionally
loaded as a module.
CC: Peng Fan <peng.fan@nxp.com>
CC: Nikunj Kela <quic_nkela@quicinc.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812173340.3912830-7-cristian.marussi@arm.com>
[sudeep.holla: moved Clang Thumb2 build fix to the new makefile]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Currently, scm driver only supports full dump when download
mode is selected. Add support to enable minidump as well as
enable it along with fulldump.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240715155655.1811178-2-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently on Qualcomm SoC, download_mode is enabled if
CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is selected or
passed a boolean value from command line.
Refactor the code such that it supports multiple download
modes and drop CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT config
instead, give interface to set the download mode from
module parameter while being backword compatible at the
same time.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240715155655.1811178-1-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Merge drivers-fixes-for-6.11 branch into drivers-for-6.12 to avoid the
(trivial) merge conflict occuring related to the qcom_pdm_domains
update.
|
|
We currently only correctly convert the virtual address passed by the
caller to qcom_tzmem_to_phys() if it corresponds to the base address of
the chunk. If the user wants to convert some pointer at an offset
relative to that base address, we'll return 0. Let's change the
implementation of qcom_tzmem_to_phys(): iterate over the chunks and try
to call gen_pool_virt_to_phys() just-in-time instead of trying to call
it only once when creating the chunk.
Fixes: 84f5a7b67b61 ("firmware: qcom: add a dedicated TrustZone buffer allocator")
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/20240729095542.21097-1-johan+linaro@kernel.org/
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240731-tzmem-efivars-fix-v2-1-f0e84071ec07@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently get_wq_ctx() is wrongly configured as a standard call. When two
SMC calls are in sleep and one SMC wakes up, it calls get_wq_ctx() to
resume the corresponding sleeping thread. But if get_wq_ctx() is
interrupted, goes to sleep and another SMC call is waiting to be allocated
a waitq context, it leads to a deadlock.
To avoid this get_wq_ctx() must be an atomic call and can't be a standard
SMC call. Hence mark get_wq_ctx() as a fast call.
Fixes: 6bf325992236 ("firmware: qcom: scm: Add wait-queue handling logic")
Cc: stable@vger.kernel.org
Signed-off-by: Murali Nalajala <quic_mnalajal@quicinc.com>
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240814223244.40081-1-quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SDI is enabled for most of the Qualcomm SoCs and as per commit
ff4aa3bc9825 ("firmware: qcom_scm: disable SDI if required")
it was recommended to disable SDI by mentioning it in device tree
to avoid hang during watchdog or during reboot.
However, for some cases if download mode tcsr register already
configured from boot firmware to collect dumps and if SDI is
disabled via means of mentioning it in device tree we could
still end up with dump collection. Disabling SDI alone is
not completely enough to disable dump mode and we also need to
zero out the bits download bits from tcsr register.
Current commit now, unconditionally call qcom_scm_set_download_mode()
based on download_mode flag, at max if TCSR register is not mentioned
or available for a SoC it will fallback to legacy way of setting
download mode through command which may be no-ops or return error
in case current firmware does not implements QCOM_SCM_INFO_IS_CALL_AVAIL
so, at worst it does nothing if it fails.
It also does to call SDI disable call if dload mode is disabled, which
looks fine to do as intention is to disable dump collection even if
system crashes.
Fixes: ff4aa3bc9825 ("firmware: qcom_scm: disable SDI if required")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240708155332.4056479-1-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Recent work on raspberry-power driver showed that even the
stacktrace on firmware property timeout doesn't provide
enough information. So add the first tag name to the warning
to be in line with a status error.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240728114200.75559-2-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Make SCMI mailbox transport a standalone driver that can be optionally
loaded as a module; while at it, create a dedicated subdirectory and
submenu for SCMI Transports.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240812173340.3912830-6-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Extend the core SCMI stack with structures and methods to allow for
transports to be split out as standalone drivers, while still supporting
old style transports, defined as built into the SCMI core stack.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240812173340.3912830-5-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Introduce a pair of structures initialized to contain all the existing
packet handling helpers, both for transports based on shared memory
and messages.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240812173340.3912830-4-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
To get the address of shmem could be generalized by introducing
setup_shmem_iomap. Then the duplicated code in mailbox.c, optee.c
and smc.c could be dropped.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
[ Cristian: use OF __free and make use of the new helper also in smc.c ]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240812173340.3912830-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Channels can be shared between protocols, avoid freeing the same channel
descriptors twice when unloading the stack.
Fixes: 5f90f189a052 ("firmware: arm_scmi: Add optee transport")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240812173340.3912830-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Reset the reception buffer max size when a voltage domain description
request fails, for example when the voltage domain returns an access
permission error (SCMI_ERR_ACCESS) unless what only a single 32bit
word is read back for the remaining voltage description requests
responses leading to invalid information. The side effect of this
issue is that the voltage regulators registered from those remaining
SCMI voltage domain were assigned a wrong regulator name.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240725065317.3758165-1-etienne.carriere@foss.st.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
It is sometimes useful to reset all these SCMI communication debug
metrics especially when we are interested in analysing these metrics
during a particular workload or for a fixed time duration. Let us
add the capability to reset all these metrics as once so that they
can be counted during the period of interest.
Signed-off-by: Luke Parkin <luke.parkin@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240805131013.587016-6-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that the basic support to collect the SCMI communication debug
metrics is in place, let us create debugfs files for the same so
that they are accessible to the users/debuggers.
Signed-off-by: Luke Parkin <luke.parkin@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240805131013.587016-5-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add the support for counting some of the SCMI communication debug metrics
like how many were sent successfully or with some errors, responses
received, notifications and delayed responses, transfer timeouts and
errors from the firmware/platform.
In many cases, the traces exists. But the traces are not always necessarily
enabled and getting such cumulative SCMI communication debug metrics helps
in understanding if there are any possible improvements that can be made
on either side of SCMI communication.
Signed-off-by: Luke Parkin <luke.parkin@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240805131013.587016-4-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Since SCMI involves interaction with the entity(software, firmware and/or
hardware) providing services or features, it is quite useful to track
certain metrics(for pure debugging purposes) like how many messages were
sent or received, were there any failures, what kind of failures, ..etc.
Add a new optional config option for the above purpose and the initial
support for counting such key debug metrics.
Signed-off-by: Luke Parkin <luke.parkin@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240805131013.587016-3-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Variable info is already defined in the outer code block and there is no
need to define the same again in the inner code block. Let us just remove
that duplicate definition of the variable info. No functional change.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Luke Parkin <luke.parkin@arm.com>
Message-Id: <20240805131013.587016-2-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Pull ARM updates from Russell King:
- ftrace: don't assume stack frames are contiguous in memory
- remove unused mod_inwind_map structure
- spelling fixes
- allow use of LD dead code/data elimination
- fix callchain_trace() return value
- add support for stackleak gcc plugin
- correct some reset asm function prototypes for CFI
[ Missed the merge window because Russell forgot to push out ]
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9408/1: mm: CFI: Fix some erroneous reset prototypes
ARM: 9407/1: Add support for STACKLEAK gcc plugin
ARM: 9406/1: Fix callchain_trace() return value
ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
ARM: 9403/1: Alpine: Spelling s/initialiing/initializing/
ARM: 9402/1: Kconfig: Spelling s/Cortex A-/Cortex-A/
ARM: 9400/1: Remove unused struct 'mod_unwind_map'
|
|
Add the aforementioned machine to the list to get e.g. efivars up.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240719-topic-t14s_upstream-v1-2-d7d97fdebb28@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
- The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
- Support for HAVE_ARCH_STACKLEAK.
- The sv39 linear map has been extended to support 128GiB mappings.
- The frequency of the mtime CSR is now visible via hwprobe.
* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: Provide the frequency of time CSR via hwprobe
riscv: Extend sv39 linear mapping max size to 128G
riscv: enable HAVE_ARCH_STACKLEAK
riscv: signal: Remove unlikely() from WARN_ON() condition
riscv: Improve exception and system call latency
RISC-V: Select ACPI PPTT drivers
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
riscv: boot: remove duplicated targets line
trace: riscv: Remove deprecated kprobe on ftrace support
riscv: cpufeature: Extract common elements from extension checking
riscv: Introduce vendor variants of extension helpers
riscv: Add vendor extensions to /proc/cpuinfo
riscv: Extend cpufeature.c to detect vendor extensions
RISC-V: run savedefconfig for defconfig
RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
...
|
|
Add support for the stackleak feature. Whenever the kernel returns to user
space the kernel stack is filled with a poison value.
At the same time, disables the plugin in EFI stub code because EFI stub
is out of scope for the protection.
Tested on qemu and milkv duo:
/ # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
[ 38.675575] lkdtm: Performing direct entry STACKLEAK_ERASING
[ 38.678448] lkdtm: stackleak stack usage:
[ 38.678448] high offset: 288 bytes
[ 38.678448] current: 496 bytes
[ 38.678448] lowest: 1328 bytes
[ 38.678448] tracked: 1328 bytes
[ 38.678448] untracked: 448 bytes
[ 38.678448] poisoned: 14312 bytes
[ 38.678448] low offset: 8 bytes
[ 38.689887] lkdtm: OK: the rest of the thread stack is properly erased
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240623235316.2010-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Wipe screen_info after allocating it from the heap - used by arm32
and EFI zboot, other EFI architectures allocate it statically
- Revert to allocating boot_params from the heap on x86 when entering
via the native PE entrypoint, to work around a regression on older
Dell hardware
* tag 'efi-fixes-for-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Revert to heap allocated boot_params for PE entrypoint
efi/libstub: Zero initialize heap allocated struct screen_info
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Define __ARCH_WANT_NEW_STAT in unistd.h
- Always enumerate MADT and setup logical-physical CPU mapping
- Add irq_work support via self IPIs
- Add RANDOMIZE_KSTACK_OFFSET support
- Add ARCH_HAS_PTE_DEVMAP support
- Add ARCH_HAS_DEBUG_VM_PGTABLE support
- Add writecombine support for DMW-based ioremap()
- Add architectural preparation for CPUFreq
- Add ACPI standard hardware register based S3 support
- Add support for relocating the kernel with RELR relocation
- Some bug fixes and other small changes
* tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Make the users of larch_insn_gen_break() constant
LoongArch: Check TIF_LOAD_WATCH to enable user space watchpoint
LoongArch: Use rustc option -Zdirect-access-external-data
LoongArch: Add support for relocating the kernel with RELR relocation
LoongArch: Remove a redundant checking in relocator
LoongArch: Use correct API to map cmdline in relocate_kernel()
LoongArch: Automatically disable KASLR for hibernation
LoongArch: Add ACPI standard hardware register based S3 support
LoongArch: Add architectural preparation for CPUFreq
LoongArch: Add writecombine support for DMW-based ioremap()
LoongArch: Add ARCH_HAS_DEBUG_VM_PGTABLE support
LoongArch: Add ARCH_HAS_PTE_DEVMAP support
LoongArch: Add RANDOMIZE_KSTACK_OFFSET support
LoongArch: Add irq_work support via self IPIs
LoongArch: Always enumerate MADT and setup logical-physical CPU mapping
LoongArch: Define __ARCH_WANT_NEW_STAT in unistd.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension
* Zimop and Zcmop for may-be-operations
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension
* Zawrs
- riscv,cpu-intc is now dtschema
- A handful of performance improvements and cleanups to text patching
- Support for memory hot{,un}plug
- The highest user-allocatable virtual address is now visible in
hwprobe
* tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (58 commits)
riscv: lib: relax assembly constraints in hweight
riscv: set trap vector earlier
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
riscv: hwprobe: export highest virtual userspace address
riscv: Improve sbi_ecall() code generation by reordering arguments
riscv: Add tracepoints for SBI calls and returns
riscv: Optimize crc32 with Zbc extension
riscv: Enable DAX VMEMMAP optimization
riscv: mm: Add support for ZONE_DEVICE
virtio-mem: Enable virtio-mem for RISC-V
riscv: Enable memory hotplugging for RISC-V
riscv: mm: Take memory hotplug read-lock during kernel page table dump
riscv: mm: Add memory hotplugging support
riscv: mm: Add pfn_to_kaddr() implementation
riscv: mm: Refactor create_linear_mapping_range() for memory hot add
...
|
|
Currently, only TLB-based ioremap() support writecombine, so add the
counterpart for DMW-based ioremap() with help of DMW2. The base address
(WRITECOMBINE_BASE) is configured as 0xa000000000000000.
DMW3 is unused by kernel now, however firmware may leave garbage in them
and interfere kernel's address mapping. So clear it as necessary.
BTW, centralize the DMW configuration to macro SETUP_DMWINS.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
