summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2021-03-03drm/amd/display: fix the return of the uninitialized value in retColin Ian King
Currently if stream->signal is neither SIGNAL_TYPE_DISPLAY_PORT_MST or SIGNAL_TYPE_DISPLAY_PORT then variable ret is uninitialized and this is checked for > 0 at the end of the function. Ret should be initialized, I believe setting it to zero is a correct default. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: bd0c064c161c ("drm/amd/display: Add return code instead of boolean for future use") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-24drm/amd/display: Fix system hang after multiple hotplugs (v3)Qingqing Zhuo
[Why] mutex_lock() was introduced in dm_disable_vblank(), which could be called in an IRQ context. Waiting in IRQ would cause issues like kernel lockup, etc. [How] Handle code that requires mutex lock on a different thread. v2: squash in compilation fix without CONFIG_DRM_AMD_DC_DCN (Alex) v3: squash in warning fix (Wei) Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-22drm/amd/display: Remove Assert from dcn10_get_dig_frontendEric Bernstein
[Why] In some cases, this function is called when DIG BE is not connected to DIG FE, in which case a value of zero isn't invalid and assert should not be hit. [How] Remove assert and handle ENGINE_ID_UNKNOWN result in calling function. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-22drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1Rodrigo Siqueira
When run igt@kms_vrr in a device that uses DCN2.1 architecture, we noticed multiple failures. Furthermore, when we tested a VRR demo, we noticed a system hang where the mouse pointer still works, but the entire system freezes; in this case, we don't see any dmesg warning or failure messages kernel. This happens due to a lack of vupdate_no_lock interrupt, making the userspace wait eternally to get the event back. For fixing this issue, we need to add the vupdate_no_lock interrupt in the interrupt list. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-22Revert "drm/amd/display: reuse current context instead of recreating one"Anson Jacob
This reverts commit 8866a67ab86cc0812e65c04f1ef02bcc41e24d68. Reason for revert: This breaks hotplug of HDMI on some systems, resulting in a blank screen. Caused general hangs on boot/hotplugs. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1487 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1492 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211649 Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-18drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()Jan Kokemüller
dcn21_validate_bandwidth() calls functions that use floating point math. On my machine this sometimes results in simd exceptions when there are other FPU users such as KVM virtual machines running. The screen freezes completely in this case. Wrapping the function with DC_FP_START()/DC_FP_END() seems to solve the problem. This mirrors the approach used for dcn20_validate_bandwidth. Tested on a AMD Ryzen 7 PRO 4750U (Renoir). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206987 Signed-off-by: Jan Kokemüller <jan.kokemueller@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-18drm/amd/display: Fix potential integer overflowGustavo A. R. Silva
Fix potential integer overflow by casting actual_calculated_clock_100hz to u64, in order to give the compiler complete information about the proper arithmetic to use. Notice that such variable is used in a context that expects an expression of type u64 (64 bits, unsigned) and the following expression is currently being evaluated using 32-bit arithmetic: actual_calculated_clock_100hz * post_divider Fixes: 7a03fdf628af ("drm/amd/display: fix 64bit division issue on 32bit OS") Addresses-Coverity-ID: 1501691 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-18drm/amdgpu/display: remove hdcp_srm sysfs on device removalNirmoy Das
Fixes: 9037246bb2da5 ("drm/amd/display: Add sysfs interface for set/get srm") Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: Simplify bool comparisonJiapeng Chong
Fix the following coccicheck warning: ./drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr_internal.h:319:11-23: WARNING: Comparison to bool. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09Revert "drm/amd/display: Update NV1x SR latency values"Alex Deucher
This reverts commit 4a3dea8932d3b1199680d2056dd91d31d94d70b7. This causes blank screens for some users. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1388 Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-09drm/amd/display: 3.2.122Aric Cyr
This version brings along following fixes: - Fix error handling in dc/dcn10/dcn10_hw_sequencer_debug.c - DIO Supported for virtual displays - memset dmub_rb_cmd to 0 which fixes issues talking with firmware - fix 64bit division issue on 32bit OS - move edp sink present detection to hw init to fix hang - reverts a patch that caused 3x4K60 displays over MST with DSC enabled to not light up Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: [FW Promotion] Release 0.0.51Anthony Koo
Add new definition and union for dmub_rb_cmd_dig1_transmitter_control Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: fix type mismatch error for return variableDale Zhao
It is possible for ret_vsnprintf to be assigned negative value in error cases. As an unsigned variable, negative values which are stored in their 2's complement form gets treated as a positive number. This will led to treating bad cases as good ones. eg: -1 gets stored as 0xFFFFFFFF on a 32 bit system Signed-off-by: Dale Zhao <dale.zhao@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: DIO Supported for virtual displaysWesley Chalmers
[WHY] Virtual displays do not use the backend of the pipe, and so have infinite backend bandwidth. [HOW] Add a skip_dio_check bool to the VBA struct, which is used to override the DIOSupport calculations. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Acked-by: Chris Park <Chris.Park@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: Initialize dmub_rb_cmd unions to 0Wyatt Wood
[Why] Since dmub_rb_cmds are not initialized to 0, the header is filled with invalid data. This is causing issues on the fw side. [How] Initialize dmub_rb_cmd unions to 0. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: fix 64bit division issue on 32bit OSLang Yu
Replace "/" with div_u64 for 64bit division on 32bit OS. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: move edp sink present detection to hw initEric Yang
[Why] At SW init, we may not be ready to do detect eDP sink. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: revert support for DID2.0 dsc passthroughJun Lei
3x4K60 displays over MST with DSC enabled was not able to light up due to this patch. Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: DP HDCP Compliance 1A-08/09 tests failQingqing Zhuo
[Why] Current implementation of mod_hdcp_hdcp2_validate_ake_cert() does not process HDCP status message TA_HDCP2_MSG_AUTHENTICATION_STATUS__SIGNATURE_CERTIFICAT_ERROR. As a result, when there is a signature certificate error, mod_hdcp_hdcp2_validate_ake_cert would return the default status, which is success. [How] For all messages other than TA_HDCP2_MSG_AUTHENTICATION_STATUS__SUCCESS and TA_HDCP2_MSG_AUTHENTICATION_STATUS__RECEIVERID_REVOKED, return status as failure. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: Add DIG_CLOCK_PATTERN in the transmitter controlDerek Lai
[Why and How] VBIOS program DIG_CLK_PATTERN using engine ID instead of PHY ID. Workaround by writing value for 0x1f (for HDMI) after calling vbios. Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: Add return code instead of boolean for future useFangzhi Zuo
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: Add otg vertical interrupt0 support in DCN1.0Wayne Lin
[Why & How] On DCN1.0, need otg vertical line interrupt to get appropriate timing to achieve specific feature request. Add otg vertical interrupt0 support for registers which operation is vertical sensitive. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amd/display: Fix unused variable warningBhawanpreet Lakha
[Why] The dm struct is only being used if DCN config is defined and this causes a unused variable warning if DCN option is not set. [How] Remove the compile flag so the variable is used (there also seems to be a duplicate guard due to a bad rebase) so remove the outer guard to fix the warning. Fixes this warning drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c: In function 'dm_set_vblank': drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:5380:33: warning: unused variable 'dm' [-Wunused-variable] Fixes: 98ab5f3513f9 ("drm/amd/display: Fix deadlock during gpu reset v3") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09Revert "drm/amd/display: fix unused variable warning"Alex Deucher
This reverts commit 4c3a3292730c56591472717d8c5c0faf74f6c6bb. Bhawan's fix is better (less ifdefs), so revert this and apply Bhawan's. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-05drm/amd/display: fix unused variable warningArnd Bergmann
After all users of the 'dm' warnings got hidden in an #ifdef, the compiler started warning about it being unused: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5380:33: error: unused variable 'dm' [-Werror,-Wunused-variable] Add another such #ifdef. Fixes: 98ab5f3513f9 ("drm/amd/display: Fix deadlock during gpu reset v3") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125124849.102037-1-arnd@kernel.org
2021-02-02amd/display: remove unneeded variable: "pattern"Bernard Zhao
Remove unneeded variable: "pattern". Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: 3.2.121Aric Cyr
This version brings along following fixes: - Better handling of dummy p-state table - Workaround for some legacy DP-VGA dongles - Add Freesync HDMI support to DMCU - Enable "trigger_hotplug" debugfs on all outputs - fix initial bounding box values for dcn3.02 - implement support for DID2.0 dsc passthrough - fix calculation for the pwl backlight curve - Fix multiple memory leaks Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: [FW Promotion] Release 0.0.50Anthony Koo
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Reject too small viewport size when validating planeNikola Cornij
[why] Overlay won't move to a new positon if viewport size is smaller than what can be handled. It'd either disappear or stay at the old position. This condition is for example hit if overlay is moved too much outside of left or top edge of the screen, but it applies to any non-cursor plane type. [how] Reject this contidion at validation time. This gives the calling level a chance to handle this gracefully and avoid inconsistent behaivor. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Better handling of dummy p-state tableJoshua Aberback
[Why] Some scenarios where we use a UCLK frequency in between dummy p-state table entries result in a p-state hang, due to the table not having a close enough match, so the default DPM0 latency is used, which can be too long to support dummy p-state switching in these scenarios. [How] - old: match if current freq is within +- margin of table entry - new: find largest table entry that is lower than current freq + margin - lower than DPM0 will still use DPM0 Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Workaround for some legacy DP-VGA donglesTaimur Hassan
[Why] Maximum resolution is 1440*900 when connecting to FHD monitor via some DP-VGA dongles. The display EDID reading fails over AUX/I2C via DP->VGA dongle, and this leads to the maximum resolution 1920*1080 cannot be obtained from EDID. [How] Provide a workaround for some legacy DP-VGA dongles with a longer aux delay. Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Decrement refcount of dc_sink before reassignmentVictor Lu
[why] An old dc_sink state is causing a memory leak because it is missing a dc_sink_release before a new dc_sink is assigned back to aconnector->dc_sink. [how] Decrement the dc_sink refcount before reassigning it to a new dc_sink. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Free atomic state after drm_atomic_commitVictor Lu
[why] drm_atomic_commit was changed so that the caller must free their drm_atomic_state reference on successes. [how] Add drm_atomic_commit_put after drm_atomic_commit call in dm_force_atomic_commit. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: remove unused force_ignore_link_settings debug optionWenjing Liu
[why] Remove force_ignore_link_settings debug option as it is no longer used. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Add Freesync HDMI support to DMCUStylon Wang
[Why] Adding support for Freesync HDMI to DC and DMCU [How] Create DC interface and implementation on top of DMCU to support parsing CEA blocks in DMCU. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Enable "trigger_hotplug" debugfs on all outputsStylon Wang
[Why] Per-connector debugfs entry "trigger_hotplug" is available on DP/eDP only. New IGT tests need this entry to test other outputs. [How] Enable this debugfs entry on all types of connectors Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Fix CW4 programming for dmub30 cached inboxNicholas Kazlauskas
[Why] The conditions for whether we used cached vs non-cached inbox1 depend on a version check that mismatches what the shared helpers in dmub20 implement. [How] Use the dmub_dcn20_use_cached_inbox check for dmub_dcn30 as well. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: fix initial bounding box values for dcn3.02Samson Tam
[Why] Initial bounding box values are updated in dcn30_update_bw_bounding_box but they use dcn3_0_soc and dcn3_0_ip instead of dcn3_02_soc and dcn3_02_ip [How] Add dcn302_update_bw_bounding_box and dcn302_get_optimal_dcfclk_fclk_for_uclk so it uses dcn3_02_soc and dcn3_02_ip. Use sr_exit_time_us, sr_enter_plus_exit_time_us, from dcn30 on dcn302 to fix flicker on eDP. Also use dram_clock_change_latency_us from dcn30. Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: implement support for DID2.0 dsc passthroughJun Lei
[Why] Some panels contain active converters (e.g. DP to MIPI) which only support restricted DSC configurations. DID2.0 adds support for such displays to explicitly define per timing BPP restrictions on DSC. Ignoring these restrictions leads to blackscreen. [How] Add parsing in DID2.0 parser to get this bpp info. Add support in DSC module to constraint target bpp based on this info. Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Fix dc_sink kref count in emulated_link_detectVictor Lu
[why] prev_sink is not used anywhere else in the function and the reference to it from dc_link is replaced with a new dc_sink. [how] Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink). Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Release DSC before acquiringMikita Lipski
[why] Need to unassign DSC from pipes that are not using it so other pipes can acquire it. That is needed for asic's that have unmatching number of DSC engines from the number of pipes. [how] Before acquiring dsc to stream resources, first remove it. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Eryk Brol <Eryk.Brol@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Revert "Fix EDID parsing after resume from suspend"Stylon Wang
This reverts commit b24bdc37d03a0478189e20a50286092840f414fa. It caused memory leak after S3 on 4K HDMI displays. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: fix calculation for the pwl backlight curveAnthony Koo
[Why] The PWL backlight curve is used by the firmware to convert between brightness and linear PWM value. Driver has a backlight LUT, but the firmware holds a PWL curve and interpolates between points. The calculations are incorrect leading to slightly off backlight values being programmed. [How] Fix the PWL backlight curve threshold/offset calculations Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: 3.2.120Aric Cyr
This DC update brings improvements in multiple areas. In summary, we highlight: - Fix display detection on HDMI ComboPHY - Drop SOC bounding box hookup - Fix DPCD values Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: [FW Promotion] Release 0.0.49Anthony Koo
- Add field for passing line time for a frame Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Add more Clock Sources to DCN2.1Sung Lee
[WHY] When enabling HDMI on ComboPHY, there are not enough clock sources to complete display detection. [HOW] Initialize more clock sources. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: correct some hdcp variable namingWenjing Liu
[why] In HDCP update stream config interface, some variables are named as xxx_supported, but in fact the variable indicates whether or not xxx_enabled. Correct the naming so it is less confusing to read the code. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Set power_gated to true for seamless boot pipe initLewis Huang
[Why] In seamless boot without a flip case, the flag power_gated didn't get cleared when resetting path mode because the plane_state is null. The following sequence will cause this issue: 1. OS call set mode to clone/extended 2. Reset path mode to remove edp [How] Set power gated default to true in seamless boot pipe Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: reuse current context instead of recreating oneBhawanpreet Lakha
[Why] Currently we discard the current context and recreate it. The current context is what is applied to the HW so we should be re-using this rather than creating a new context. Recreating the context can lead to mismatch between new context and the current context For example: gsl groups get changed when we create a new context this can cause issues in a multi display config (with flip immediate) because we don't align the existing gsl groups in the new and current context. If we reuse the current context the gsl group assignment stays the same. [How] Instead of discarding the current context, we instead just copy the current state and add/remove planes and streams. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Add null pointer check to is_dig_enabled funcMichael Strauss
[WHY] Safeguarding as pointer may be null in diagnostic environment Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-11 00:33:30 +0000