summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2024-09-18drm/amd/display: Block timing sync for different output formats in pmoDillon Varone
[WHY & HOW] If the output format is different for HDMI TMDS signals, they are not synchronizable. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Enable DML2 override_det_buffer_size_kbytesYihan Zhu
[WHY] Corrupted screen will be observed when 4k144 DP/HDMI display and 4k144 eDP are connected, changing eDP refresh rate from 60Hz to 144Hz. [HOW] override_det_buffer_size_kbytes should be true for DCN35/DCN351. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Add dmub hpd sense callbackRoman Li
[WHY] HPD sense notification has been implemented in DMUB, which can occur during low power states and need to be notified from firmware to driver. [HOW] Define callback and register new HPD sense notification. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Emulate Display Hotplug HangDaniel Sa
[WHY] Driver reports 0 display when the virtual display is still present, and causes P-state hang in FW. [HOW] When enumerating through streams, check for active planes and use that to indicate number of displays. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Daniel Sa <Daniel.Sa@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Implement new DPCD register handlingRyan Seto
[WHY] There are some monitor timings that seem to be supported without DSC but actually require DSC to be displayed. A VESA SCR introduced a new max uncompressed pixel rate cap register that we can use to handle these edge cases. [HOW] SST: Read caps from link and invalidate timings that exceed the max limit but do not support DSC. Then check for options override when determining BPP. MST: Read caps from virtual DPCD peer device or daisy chained SST monitor and set validation set BPPs to max if pixel rate exceeds uncompressed limit. Validation set optimization continues as normal. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Use SDR white level to calculate matrix coefficientsSamson Tam
[WHY] Certain profiles have higher HDR multiplier than SDR white level max which is not currently supported. [HOW] Use SDR white level when calculating matrix coefficients for HDR RGB MPO path instead of HDR multiplier. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Round calculated vtotalRobin Chen
[WHY] The calculated vtotal may has 1 line deviation. To get precisely vtotal number, round the vtotal result. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: fix typo in the commentYan Zhen
Correctly spelled comments make it easier for the reader to understand the code. Replace 'maxium' with 'maximum' in the comment & replace 'diffculty' with 'difficulty' in the comment & replace 'suppluy' with 'supply' in the comment & replace 'Congiuration' with 'Configuration' in the comment & replace 'eanbled' with 'enabled' in the comment. Signed-off-by: Yan Zhen <yanzhen@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-17Merge tag 'amd-drm-next-6.12-2024-09-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.12-2024-09-13: amdgpu: - GPUVM sync fixes - kdoc fixes - Misc spelling mistakes - Add some raven GFXOFF quirks - Use clamp helper - DC fixes - JPEG fixes - Process isolation fix - Queue reset fix - W=1 cleanup - SMU14 fixes - JPEG fixes amdkfd: - Fetch cacheline info from IP discovery - Queue reset fix - RAS fix - Document SVM events - CRIU fixes - Race fix in dma-buf handling drm: - dma-buf fd race fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240913134139.2861073-1-alexander.deucher@amd.com
2024-09-11drm/amd/display: Add all planes on CRTC to state for overlay cursorLeo Li
[Why] DC has a special commit path for native cursor, which use the built-in cursor pipe within DCN planes. This update path does not require all enabled planes to be added to the list of surface updates sent to DC. This is not the case for overlay cursor; it uses the same path as MPO commits. This update path requires all enabled planes to be added to the list of surface updates sent to DC. Otherwise, DC will disable planes not inside the list. [How] If overlay cursor is needed, add all planes on the same CRTC as this cursor to the atomic state. This is already done for non-cursor planes (MPO), just before the added lines. Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-11Merge tag 'amd-drm-next-6.12-2024-09-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.12-2024-09-06: amdgpu: - IPS updates - Post divider fix - DML2 updates - Misc static checker fixes - DCN 3.5 fixes - Replay fixes - DMCUB updates - SWSMU fixes - DP MST fixes - Add debug flag for per queue resets - devcoredump updates - SR-IOV fixes - MES fixes - Always allocate cleared VRAM for GEM - Pipe reset for GC 9.4.3 - ODM policy fixes - Per queue reset support for GC 10 - Per queue reset support for GC 11 - Per queue reset support for GC 12 - Display flickering fixes - MPO fixes - Display sharpening updates amdkfd: - SVM fix for IH for APUs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240906211008.3072097-1-alexander.deucher@amd.com
2024-09-10drm/amd/display: Do not reset planes based on crtc zpos_changedLeo Li
[Why] drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of it's assigned planes changes zpos, or is removed/added from it. To have amdgpu_dm request a plane reset on this is too broad. For example, if only the cursor plane was moved from one crtc to another, the crtc's zpos_changed will be set to true. But that does not mean that the underlying primary plane requires a reset. [How] Narrow it down so that only the plane that has a change in zpos will require a reset. As a future TODO, we can further optimize this by only requiring a reset on z-order change. Z-order is different from z-pos, since a zpos change doesn't necessarily mean the z-ordering changed, and DC should only require a reset if the z-ordering changed. For example, the following zpos update does not change z-ordering: Plane A: zpos 2 -> 3 Plane B: zpos 1 -> 2 => Plane A is still on top of plane B: no reset needed Whereas this one does change z-ordering: Plane A: zpos 2 -> 1 Plane B: zpos 1 -> 2 => Plane A changed from on top, to below plane B: reset needed Fixes: 38e0c3df6dbd ("drm/amd/display: Move PRIMARY plane zpos higher") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569 Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Add kdoc entry for 'program_isharp_1dlut' in ↵Srinivasan Shanmugam
'dpp401_dscl_program_isharp' Added a descriptor for the 'program_isharp_1dlut' parameter, which is a flag used to determine whether to program the isharp 1D LUT. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:963: warning: Function parameter or struct member 'program_isharp_1dlut' not described in 'dpp401_dscl_program_isharp' Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: fix dccg root clock optimization related hangQili Lu
[Why] enable dpp rcg before we disable dppclk in hw_init cause system hang/reboot [How] we remove dccg rcg related code from init into a separate function and call it after we init pipe Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Qili Lu <qili.lu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Refactor dccg35_get_other_enabled_symclk_feNicholas Susanto
[Why] Function used to check the number of FEs connected to the current BE. This was then used to determine if the symclk could be disabled, if all FEs were disconnected. However, the function would skip over the primary FE and return 0 when the primary FE was still connected. This caused black screens on driver disable with an MST daisy chain hooked up. [How] Refactor the function to correctly return the number of FEs connected to the input BE. Also, rename it for clarity. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Avoid race between dcn35_set_drr() and dc_state_destruct()Tobias Jakobi
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn35_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn35_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn35_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct()Tobias Jakobi
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn10_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn10_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn10_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com> Tested-by: Christopher Snowhill <chris@kode54.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Sefa Eyeoglu <contact@scrumplex.net> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Fix spelling mistake "recompte" -> "recompute"Colin Ian King
There is a spelling mistake in a DRM_DEBUG_DRIVER message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-06drm/amd/display: Add missing kdoc entry for 'bs_coeffs_updated' in ↵Srinivasan Shanmugam
dpp401_dscl_program_isharp This commit addresses a missing kdoc for the 'bs_coeffs_updated' parameter in the 'dpp401_dscl_program_isharp' function. The 'bs_coeffs_updated' is a flag indicating whether the Blur and Scale Coefficients have been updated. The 'dpp401_dscl_program_isharp' function is responsible for programming the isharp, which includes setting the isharp filter, noise gain, and blur and scale coefficients. If the 'bs_coeffs_updated' flag is set to true, the function updates the blur and scale coefficients. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:961: warning: Function parameter or struct member 'bs_coeffs_updated' not described in 'dpp401_dscl_program_isharp' Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Tom Chung <chiahsuan.chung@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: 3.2.299Aric Cyr
This version brings along the following: - DCN35 fixes - DML2 fixes - IPS fixes - ODM fixes - Miscellaneous cleanups - MST fixes - SPL fixes Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Fix flickering caused by dccgHansen Dsouza
Always allow un-gating. Follow legacy workaround for repeated dppclk dto updates Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Block timing sync for different signals in PMODillon Varone
PMO assumes that like timings can be synchronized, but DC only allows this if the signal types match. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: fix graphics hang in multi-display mst caseGabe Teeger
[what] Graphics hang observed with 3 displays connected to DP2.0 mst dock. [why] There's a mismatch in dml and dc between the assignments of hpo link encoders. [how] Add a new array in dml that tracks the current mapping of HPO stream encoders to HPO link encoders in dc. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Add sharpness control interfaceRelja Vojvodic
- Add interface for controlling shapness level input into DCN. - Update SPL to support custom sharpness values. - Add support for different sharpness values depending on YUV/RGB content. Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02Revert "drm/amd/display: Wait for all pending cleared before full update"Dillon Varone
This reverts commit f0b7dcf25834afd17df316367dfe5d4c890c713c. It is causing graphics hangs. Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: disable sharpness if HDR Multiplier is too largeSamson Tam
[Why] Certain profiles have higher HDR multiplier than SDR boost max which is not currently supported [How] Disable sharpness for these profiles Fixes: 1b0ce903fe74 ("drm/amd/display: add improvements for text display and HDR DWM and MPO") Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Add dpia debug option to control power managementMeenakshikumar Somasundaram
[Why] To provide option to dpia control power management [How] By adding disable_usb4_pm_support bit field in dpia_debug option to control dpia power management Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: re-enable Dynamic ODM policySamson Tam
[Why] Previous disable ODM policy due to underflow issue with sharpener. Issue is resolved after updating sharpening policy to apply to both windowed and fullscreen video [How] Remove sharpness check disabling Dynamic ODM policy Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Lock DC and exit IPS when changing backlightLeo Li
Backlight updates require aux and/or register access. Therefore, driver needs to disallow IPS beforehand. So, acquire the dc lock before calling into dc to update backlight - we should be doing this regardless of IPS. Then, while the lock is held, disallow IPS before calling into dc, then allow IPS afterwards (if it was previously allowed). Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: only trigger BIOS related assert for older ASICsDaniel Sa
[Why] Some asserts are always hit on startup/Pnp when they should only be used to indicate when something has gone wrong. [How] Ignore result of getting function from bios cmd table for newer asics. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Daniel Sa <Daniel.Sa@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Fix DCN35 set min dispclk logicNicholas Susanto
[Why] Setting min dispclk to 50Mhz outside clock lowering function causes unnecessary calls to SMU to lower dispclk and causes dentist hangs when there is no stream on the pipes. [How] Move the set minimum dispclk logic inside the lowering dispclk if statement. Fixes: 234441320552 ("DCN35 set min dispclk to 50Mhz") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-30Merge tag 'drm-misc-next-2024-08-29' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: devfs: - support device numbers up to MINORBITS limit Core Changes: ci: - increase job timeout devfs: - use XArray for minor ids displayport: - mst: GUID improvements docs: - add fixes and cleanups panic: - optionally display QR code Driver Changes: amdgpu: - faster vblank disabling - GUID improvements gm12u320 - convert to struct drm_edid host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: add support for BOE NE140WUM-N6G; revert support for SDC ATNA45AF01 - visionox-vtdr6130: improve error handling; use devm_regulator_bulk_get_const() renesas: - rz-du: add support for RZ/G2UL plus DT bindings sti: - convert to struct drm_edid tegra: - gr3d: improve PM domain handling - convert to struct drm_edid Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240829144654.GA145538@linux.fritz.box
2024-08-29drm/amd/display: Determine IPS mode by ASIC and PMFW versionsLeo Li
[Why] DCN IPS interoperates with other system idle power features, such as Zstates. On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a hard hang. We observe this on systems where the SBIOS allows Z8. Though there is a SBIOS fix, there's no guarantee that users will get it any time soon, or even install it. A workaround is needed to prevent this from rearing its head in the wild. [How] For DCN35, check the pmfw version to determine whether the SBIOS has the fix. If not, set IPS1+RCG as the deepest possible state in all cases except for s0ix and display off (DPMS). Otherwise, enable all IPS Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-29drm/amdgpu/display: Fix a mistake in revert commitFangzhi Zuo
[why] It is to fix in try_disable_dsc() due to misrevert of commit 338567d17627 ("drm/amd/display: Fix MST BW calculation Regression") [How] Fix restoring minimum compression bw by 'max_kbps', instead of native bw 'stream_kbps' Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-29drm/amd/display: switch to guid_gen() to generate valid GUIDsJani Nikula
Instead of just smashing jiffies into a GUID, use guid_gen() to generate RFC 4122 compliant GUIDs. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-3-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-29drm/mst: switch to guid_t type for GUIDJani Nikula
The kernel has a guid_t type for GUIDs. Switch to using it, but avoid any functional changes here. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-27drm/amdgpu/display: remove unnecessary TODO spl_os_types.hZaeem Mohamed
Remove unnecessary TODO from spl_os_types.h Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amdgpu/display: SPDX copyright for spl_os_types.hZaeem Mohamed
Use appropriate SPDX copyright for spl_os_types.h Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Add DSC Debug LogFangzhi Zuo
Add DSC log in each critical routines to facilitate debugging. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: 3.2.298Aric Cyr
This version brings along the following fixes: - Fix MS/MP mismatches in dml21 for dcn401 - Resolved Coverity issues - Add back quality EASF and ISHARP and dc dependency changes - Add sharpness support for windowed YUV420 video - Add improvements for text display and HDR DWM and MPO - Fix Synaptics Cascaded Panamera DSC Determination - Allocate DCN35 clock table transfer buffers in GART - Add Replay Low Refresh Rate parameters in dc type Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: add sharpness support for windowed YUV420 videoSamson Tam
[Why] Previous only applied sharpness for fullscreen YUV420 video. [How] Remove fullscrene restriction and apply sharpness for windowed YUV420 video as well. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: add improvements for text display and HDR DWM and MPOSamson Tam
[Why] Tune settings for improved text display. Handle differences between DWM and MPO in HDR path. [How] Update sharpener LBA table. Use HDR multiplier to calculate scalar matrix coefficients for HDR RGB MPO path. Update unit tests. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Add Replay Low Refresh Rate parameters in dc type.Dennis Chan
Why: To supported Low Refresh Rate panel for Replay Feature, Adding some parameters to record Low Refresh Rate information. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: add back quality EASF and ISHARP and dc dependency changesSamson Tam
[Why] Addressed previous issues with quality changes and new issues due to rolling back quality changes. [How] This reverts commit f9e6759888866748f31b6b6c2142a481d587f51f, fixes merge conflicts, and fixed some formatting errors. Store current sharpness level for each pregen table to minimize calculating sharpness table every time. Disable dynamic ODM when sharpness is enabled. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Notify DMCUB of D0/D3 stateNicholas Kazlauskas
[Why] We want to avoid arming the HPD timer in firmware when preparing for S0i3 entry when DC is considered in D3. [How] Notify DMCUB of the power state transitions so it can decide to arm the HPD timer for idle in DCN35 only in D0. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Fix Synaptics Cascaded Panamera DSC DeterminationFangzhi Zuo
Synaptics Cascaded Panamera topology needs to unconditionally acquire root aux for dsc decoding. Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Retry Replay residencyChunTao Tso
[Why] Because sometime DMUB GPINT will time out, it will cause we return 0 as residency number. [How] Retry to avoid this happened. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Allocate DCN35 clock table transfer buffers in GARTNicholas Kazlauskas
[Why] Request from PMFW to use GART for clock table transfer tables as framebuffer is being deprecated on APU. [How] Switch over to GART via the allocation flag. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: do not set traslate_by_source for DCN401 cursorAurabindo Pillai
translate_by_source need not be set for DCN401 onwards since cursor cursor composition comes after scaler in the hardware pipeline. Hence offset calculation has been reworked, and this setting is not necessary to be enabled anymore. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Resolve Coverity IssuesDaniel Sa
[WHY] Remove coverity issues that were originally ignored. [HOW] Ran coverity locally on driver, used output report to find existing coverity issues, resolved them Reviewed-by: Nicholas Choi <nicholas.choi@amd.com> Signed-off-by: Daniel Sa <Daniel.Sa@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-10-03 16:09:09 +0000