summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2025-02-25drm/amd/display: handle max_downscale_src_width fail checkYihan Zhu
[WHY] If max_downscale_src_width check fails, we exit early from TAP calculation and left a NULL value to the scaling data structure to cause the zero divide in the DML validation. [HOW] Call set default TAP calculation before early exit in get_optimal_number_of_taps due to max downscale limit exceed. Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Update FIXED_VS Link Rate Toggle Workaround UsageMichael Strauss
[WHY] Previously the 128b/132b LTTPR support DPCD field was used to decide if FIXED_VS training sequence required a rate toggle before initiating LT. When running DP2.1 4.9.x.x compliance tests, emulated LTTPRs can report no-128b/132b support which is then forwarded by the FIXED_VS retimer. As a result this test exposes the rate toggle again, erroneously causing failures as certain compliance sinks don't expect this behaviour. [HOW] Add new DPCD register defines/reads to read LTTPR IEEE OUI and device ID. Decide whether to perform the rate toggle based on the LTTPR's IEEE OUI which guarantees that we only perform the toggle on affected retimers. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: fix dcn4x init failedCharlene Liu
[why] failed due to cmdtable not created. switch atombios cmdtable as default. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Temporarily disable hostvm on DCN31Aurabindo Pillai
With HostVM enabled, DCN31 fails to pass validation for 3x4k60. Some Linux userspace does not downgrade one of the monitors to 4k30, and the result is that the monitor does not light up. Disable it until the bandwidth calculation failure is resolved. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: ACPI Re-timer ProgrammingRafal Ostrowski
[Why] We must implement an ACPI re-timer programming interface and notify ACPI driver whenever a PHY transition is about to take place. Because some trace lengths on certain platforms are very long, then a re-timer may need to be programmed whenever a PHY transition takes place. The implementation of this re-timer programming interface will notify ACPI driver that PHY transition is taking place and it will trigger the re-timer as needed. First we need to gather retimer information from ACPI interface. Then, in the PRE case, the re-timer interface needs to be called before we call transmitter ENABLE. In the POST case, it has to be called after we call transmitter DISABLE. [How] Implemented ACPI retimer programming interface. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rafal Ostrowski <rostrows@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Refactor DCN4x and related codePatel, Swapnil
[why & how] Refactor existing code related to DCN4x for better code sharing with other modules. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: add a quirk to enable eDP0 on DP1Yilin Chen
[why] some board designs have eDP0 connected to DP1, need a way to enable support_edp0_on_dp1 flag, otherwise edp related features cannot work [how] do a dmi check during dm initialization to identify systems that require support_edp0_on_dp1. Optimize quirk table with callback functions to set quirk entries, retrieve_dmi_info can set quirks according to quirk entries Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yilin Chen <Yilin.Chen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: replace dio encoder accessPeichen Huang
[WHY] replace dio encoder access to work with new dio encoder assignment. [HOW} 1. before validation, access dio encoder by get_temp_dio_link_enc() 2. after validation, access dio encoder through pipe_ctx->link_res Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Add SPL namespaceNavid Assadian
[Why] In order to avoid component conflicts, spl namespace is needed. [How] Adding SPL namespace to the public API os that each user of SPL can have their own namespace. Signed-off-by: Navid Assadian <Navid.Assadian@amd.com> Reviewed-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Fix unit test failureSamson Tam
[Why] Some of unit tests use large scaling ratio such that when we calculate optimal number of taps, max_taps is negative. Then in recent change, we changed max_taps to uint instead of int so now max_taps wraps and is positive. This change changed the behaviour from returning back false to return true and breaks unit test check [How] Add check to prevent max_taps from wrapping and set to 0 instead Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: fix check for identity ratioSamson Tam
[Why] IDENTITY_RATIO check uses 2 bits for integer, which only allows checking downscale ratios up to 3. But we support up to 6x downscale [How] Update IDENTITY_RATIO to check 3 bits for integer Add ASSERT to catch if we downscale more than 6x Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Fix mismatch type comparisonAssadian, Navid
The mismatch type comparison/assignment may cause data loss. Since the values are always non-negative, it is safe to use unsigned variables to resolve the mismatch. Signed-off-by: Navid Assadian <navid.assadian@amd.com> Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Add opp recout adjustmentNavid Assadian
[Why] For subsampled YUV output formats, more pixels can get fetched and be used for scaling. [How] Add the adjustment to the calculated recout, so the viewport covers the corresponding pixels on the source plane. Signed-off-by: Navid Assadian <Navid.Assadian@amd.com> Reviewed-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Fix mismatch type comparison in custom_floatSamson Tam
[Why & How] Passing uint into uchar function param. Pass uint instead Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Apply DCN35 DML2 state policy for DCN36 tooNicholas Kazlauskas
[Why] DCN36 should inherit the same policy as DCN35 for DML2. [How] Add it to the list of checks in translation helper. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: update incorrect cursor buffer sizeAlex Hung
[WHAT & HOW] Fix the incorrect value of the cursor_buffer_size. Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Disable PSR-SU on eDP panelsTom Chung
[Why] PSR-SU may cause some glitching randomly on several panels. [How] Temporarily disable the PSR-SU and fallback to PSR1 for all eDP panels. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3388 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Revert "Disable PSR-SU on some OLED panel"Tom Chung
This reverts commit c31b41f1cb32450d8ac176eef9bda979760040e7. We planning to disable the PSR-SU and fallback to PSR1 for all eDP panels not only for specific eDP panel temporarily. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Fix spelling mistake "oustanding" -> "outstanding"Colin Ian King
There is a spelling mistake in max_oustanding_when_urgent_expected, fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: restore edid reading from a given i2c adapterMelissa Wen
When switching to drm_edid, we slightly changed how to get edid by removing the possibility of getting them from dc_link when in aux transaction mode. As MST doesn't initialize the connector with `drm_connector_init_with_ddc()`, restore the original behavior to avoid functional changes. v2: - Fix build warning of unchecked dereference (kernel test bot) CC: Alex Hung <alex.hung@amd.com> CC: Mario Limonciello <mario.limonciello@amd.com> CC: Roman Li <Roman.Li@amd.com> CC: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: fix an indent issue in DML21Aurabindo Pillai
Remove extraneous tab and newline in dml2_core_dcn4.c that was reported by the bot Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502211920.txUfwtSj-lkp@intel.com/ Fixes: 70839da6360 ("drm/amd/display: Add new DCN401 sources") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amdgpu: update the handle ptr in is_idleSunil Khatri
Update the *handle to amdgpu_ip_block ptr for all functions pointers of is_idle. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-21drm/amd/display: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-drm-v1-5-210f2b36b9bf@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-19drm/amd/display: Add clear DCC and Tiling callback for DCERodrigo Siqueira
Introduce the DCC and Tiling reset callback to all DCE versions that can call it. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: 3.2.321Taimur Hassan
Summary: * Add support for disconnected eDP streams * Add log for MALL entry on DCN32x * Add DCC/Tiling reset helper for DCN and DCE * Guard against setting dispclk low when active * Other minor fixes Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add support for disconnected eDP streamsHarry VanZyllDeJong
[Why] eDP may not be connected to the GPU on driver start causing fail enumeration. [How] Move the virtual signal type check before the eDP connector signal check. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: dpia should avoid encoder used by dp2Peichen Huang
[WHY] In current HPO DP2 implementation, driver would enable/disable DIG encoder when configuring HPO DP2. Therefore, usb4 dp tunnelling should not use the DIG encoder if the corresponded phy is used by a HPO DP2 stream. [HOW] A DP2 stream is treated as a dig stream. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Guard against setting dispclk low when activeNicholas Kazlauskas
[Why] We should never apply a minimum dispclk value while in prepare_bandwidth or while displays are active. This is always an optimization for when all displays are disabled. [How] Defer dispclk optimization until safe_to_lower = true and display_count reaches 0. Since 0 has a special value in this logic (ie. no dispclk required) we also need adjust the logic that clamps it for the actual request to PMFW. Reviewed-by: Gabe Teeger <gabe.teeger@amd.com> Reviewed-by: Leo Chen <leo.chen@amd.com> Reviewed-by: Syed Hassan <syed.hassan@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Fix BT2020 YCbCr limited/full range inputIlya Bakoulin
[Why] BT2020 YCbCr input is not handled properly when full range quantization is used and limited range is not supported at all. [How] - Add enums for BT2020 YCbCr limited/full range - Add limited range CSC matrix Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Robert Mader <robert.mader@collabora.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add log for MALL entry on DCN32xAurabindo Pillai
[Why&How] Add a dyndbg log entry to check whether the driver requested scanout from MALL cache to PMFW via DMCUB Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add total_num_dpps_required field to informative structureOleh Kuzhylnyi
[Why] The informative structure needs to be extended by the total number of DPPs required per each active plane. The new informative field is going to be used as a statistical indicator. [How] The dml2_core_calcs_get_informative() routine must count a total number of DPPs. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Read LTTPR ALPM caps during link cap retrievalGeorge Shen
[Why] The latest DP spec requires the DP TX to read DPCD F0000h through F0009h when detecting LTTPR capabilities for the first time. [How] Update LTTPR cap retrieval to read up to F0009h (two more bytes than the previous F0007h), and store the LTTPR ALPM capabilities. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Print seamless boot message in mark_seamless_boot_streamAlex Hung
[WHAT & HOW] Add a message so users know the stream will be used for seamless boot. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add clear DCC and Tiling callback for DCNRodrigo Siqueira
Introduce the DCC and Tiling reset callback to all DCN versions that can call it. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Rename panic functionRodrigo Siqueira
Rename dc_plane_force_update_for_panic to dc_plane_force_dcc_and_tiling_disable to describe the function operation in the name. Also, this function might be used in other contexts, and a more generic name can be helpful for this purpose. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Add DCC/Tiling reset helper for DCN and DCERodrigo Siqueira
This commit introduces a function helper for resetting DCN/DCE DCC and tiling. Those functions are generic for their respective DCN/DCE, so they were added to the oldest version of each architecture. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19Revert "drm/amd/display: Request HW cursor on DCN3.2 with SubVP"Leo Zeng
This reverts commit 13437c91606c9232c747475e202fe3827cd53264. Reason to revert: idle power regression found in testing. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Leo Zeng <Leo.Zeng@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Don't treat wb connector as physical in ↵Harry Wentland
create_validate_stream_for_sink Don't try to operate on a drm_wb_connector as an amdgpu_dm_connector. While dereferencing aconnector->base will "work" it's wrong and might lead to unknown bad things. Just... don't. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-19drm/amd/display: Exit idle optimizations before accessing PHYOvidiu Bunea
[why & how] By default, DCN HW is in idle optimized state which does not allow access to PHY registers. If BIOS powers up the DCN, it is fine because they will power up everything. Only exit idle optimized state when not taking control from VBIOS. Fixes: be704e5ef4bd ("Revert "drm/amd/display: Exit idle optimizations before attempt to access PHY"") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-18Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get bugfixes from v6.14-rc2. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2025-02-17drm/amd/display: Reapply 2fde4fdddc1fNathan Chancellor
Commit 2563391e57b5 ("drm/amd/display: DML2.1 resynchronization") blew away the compiler warning fix from commit 2fde4fdddc1f ("drm/amd/display: Avoid -Wenum-float-conversion in add_margin_and_round_to_dfs_grainularity()"), causing the warning to reappear. drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:183:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion] 183 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated. Apply the fix again to resolve the warning. Fixes: 1b30456150e5 ("drm/amd/display: DML21 Reintegration") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-14Merge tag 'drm-misc-next-2025-02-12' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.15: UAPI Changes: fourcc: - Add modifiers for MediaTek tiled formats Cross-subsystem Changes: bus: - mhi: Enable image transfer via BHIe in PBL dma-buf: - Add fast-path for single-fence merging Core Changes: atomic helper: - Allow full modeset on connector changes - Clarify semantics of allow_modeset - Clarify semantics of drm_atomic_helper_check() buddy allocator: - Fix multi-root cleanup ci: - Update IGT display: - dp: Support Extendeds Wake Timeout - dp_mst: Fix RAD-to-string conversion panic: - Encode QR code according to Fido 2.2 probe helper: - Cleanups scheduler: - Cleanups ttm: - Refactor pool-allocation code - Cleanups Driver Changes: amdxdma: - Fix error handling - Cleanups ast: - Refactor detection of transmitter chips - Refactor support of VBIOS display-mode handling - astdp: Fix connection status; Filter unsupported display modes bridge: - adv7511: Report correct capabilities - it6505: Fix HDCP V compare - sn65dsi86: Fix device IDs - Cleanups i915: - Enable Extendeds Wake Timeout imagination: - Check job dependencies with DRM-sched helper ivpu: - Improve command-queue handling - Use workqueue for IRQ handling - Add suport for HW fault injection - Locking fixes - Cleanups mgag200: - Add support for G200eH5 chips msm: - dpu: Add concurrent writeback support for DPU 10.x+ nouveau: - Move drm_slave_encoder interface into driver - nvkm: Refactor GSP RPC omapdrm: - Cleanups panel: - Convert several panels to multi-style functions to improve error handling - edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3, LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006, Lenovo T14s Gen6 Snapdragon - himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay kd110n11-51ie, Starry 2082109qfh040022-50e panthor: - Expose sizes of intenral BOs via fdinfo - Fix race between reset and suspend - Cleanups qaic: - Add support for AIC200 - Cleanups renesas: - Fix limits in DT bindings rockchip: - rk3576: Add HDMI support - vop2: Add new display modes on RK3588 HDMI0 up to 4K - Don't change HDMI reference clock rate - Fix DT bindings solomon: - Set SPI device table to silence warnings - Fix pixel and scanline encoding v3d: - Cleanups vc4: - Use drm_exec - Use dma-resv for wait-BO ioctl - Remove seqno infrastructure virtgpu: - Support partial mappings of GEM objects - Reserve VGA resources during initialization - Fix UAF in virtgpu_dma_buf_free_obj() - Add panic support vkms: - Switch to a managed modesetting pipeline - Add support for ARGB8888 xlnx: - Set correct DMA segment size - Fix error handling - Fix docs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250212090625.GA24865@linux.fritz.box
2025-02-14drm/amdgpu: Enable async flip on overlay planesAndré Almeida
amdgpu can handle async flips on overlay planes, so allow it for atomic async checks. Signed-off-by: André Almeida <andrealmeid@igalia.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250127-tonyk-async_flip-v12-2-0f7f8a8610d3@igalia.com [DB: fixed checkpatch warning by adding braces] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-12drm/amd/display: 3.2.320Taimur Hassan
Summary: * Start enabling support for 4-plane MPO * DML21 Updates * SPL Updates * Other minor fixes Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: sspl: cleanup filter codeSamson Tam
[Why & How] Remove unused filters and functions Add static to limit scope Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Make dcn401_program_pipe non staticAurabindo Pillai
Allow reuse of code by making dcn401_program_pipe() non static. Fixes: 2739bd123782 ("drm/amd/display: Allow reuse of of DCN4x code") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: pass calculated dram_speed_mts to dml2Charlene Liu
[why] currently dml2 is using a hard coded 16 to convert memclk to dram_speed_mts. for apu, this depends on wck_ratio. change to pass the already calculated dram_speed_mts from fpu to dml2. v2: use existing calculation of dram_speed_mts for now to avoid regression Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: add workaround flag to link to force FFE presetBrendan Tam
[Why] There have been instances of some monitors being unable to link train on their reported link speed using their selected FFE preset. If a different FFE preset is found that has a higher rate of success during link training this workaround can be used to force its FFE preset. [How] A new link workaround flag is made called force_dp_ffe_preset. The flag is checked in override_training_settings and will set lt_settings->ffe_preset which is null if the flag is not set. The flag is then set in override_lane_settings. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Brendan Tam <Brendan.Tam@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: add s1_12 filter tablesSamson Tam
[Why & How] Instead of converting tables from s1_10 to s1_12, add s1_12 tables instead. Remove init calls that do the conversion. Add APIs to read s1_10 tables Reviewed-by: Navid Assadian <navid.assadian@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: limit coverage of optimization skipAusef Yousof
[why&how] causing some regression on dgpu which still needs the pre-emptive return, limit this to reporter asic version it is simple to include different dcn versions from this point forward, each dcn resource is initialized with the flag and can be enabled at will Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-07-31 11:25:26 +0000