summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2025-07-15drm/amd/display: Monitor patch to ignore EDID audio SAB checkFudongwang
[Why & How] Some monitor have audio output but SAB data is zero. Skip check this in this case. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Fudongwang <Fudong.Wang@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-15drm/amd/display: Add definitions to support DID Type5 descriptorsIlya Bakoulin
[Why/How] Add the timing source needed to support DID Type5. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-15drm/amd/display: Refactor DSC cap calculationsDillon Varone
[WHY] DSC block level should only be responsible for reporting single DSC instance capabilities. Factoring in ODM combine requirements should be handled in dc_dsc.c. Both components should acquire clocks from clk_mgr to determine throughput capabilities instead of relying on hard coded values as these can differ by SoC and SKU. [HOW] 1) Add dsc_get_single_enc_caps to acquire single DSC instance capabilities (replacing dsc_get_enc_caps), factoring in DSCCLK 2) add build_dsc_enc_caps to combine single DSC instance capabilities 3) account for max pixel rate per pipe (DISPCLK) when calculating minimum slice count Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-15drm/amd/display: Make dcn401_initialize_min_clocks() available to other ↵Karthi Kandasamy
compilation units [Why & How] Expose dcn401_initialize_min_clocks() for future use and add additional check for IP register. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-15drm/amd/display: MPC basic allocation logic and TMZYihan Zhu
[WHY & HOW] Adding basic logic to allocate unused RMCM block and TMZ support. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-15drm/amd/display: Workaround for stuck I2C arbitrageDominik Kaszewski
[Why] When booting without an HDMI display connected, the I2C registers are not initialized correctly, leading to DC_I2C_ARBITRATION register getting stuck with DC_I2C_REG_RW_CNTL_STATUS == USED_BY_SW. [How] * Correct TOCTOU race condition in engine acquire logic which did not check against DMUB trying to acquire it at the same time. * Deassert SOFT_RESET before acquire, as it can block access to other I2C registers. * Add a workaround in release, checking that after triggerring DC_I2C_SW_DONE_USING_I2C_REG, DC_I2C_REG_RW_CNTL_STATUS != USED_BY_SW. If necessary, trigger DC_I2C_SW_DONE_USING_I2C_REG again. * Remove unnecessary clear of DC_I2C_SW_USE_I2C_REG_REQ, which engine ignores according to specification. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-07drm/amd/display: Use scaling for non-native resolutions on LVDSAlex Deucher
[Why] Common resolutions are added to supported modes to enable compatibility scenarios that compositors may use to do things like clone displays. There is no guarantee however that the panel will natively support these modes. [How] If the compositor hasn't enabled scaling but a non-native resolution has been picked for an LVDS panel turn the scaler on anyway. This will ensure compatibility. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-07drm/amd/display: Disable common modes for LVDSAlex Deucher
[Why] Common modes are added to LVDS for compatibility in clone mode, but not all panels support them. Non-native modes were disabled in the past but this caused problems because compositors didn't use scaling for non native modes. Now non-native modes on LVDS will enable the scaler by default. [How] Check the connector type. If the connector is LVDS avoid adding common modes. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Don't allow OLED to go down to fully offMario Limonciello
[Why] OLED panels can be fully off, but this behavior is unexpected. [How] Ensure that minimum luminance is at least 1. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4338 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 51496c7737d06a74b599d0aa7974c3d5a4b1162e)
2025-06-30drm/amd/display: Added case for when RR equals panel's max RR using freesyncHarold Sun
[WHY] Rounding error sometimes occurs when the refresh rate is equal to a panel's max refresh rate, causing HDMI compliance failures. [HOW] Added a case so that we round up to avoid v_total_min to be below a panel's minimum bound. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Harold Sun <Harold.Sun@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit fe7645d22bc0f7c1558296538ec49987bf268ef6)
2025-06-30drm/amd/display: Promote DAL to 3.2.340Taimur Hassan
Summary: * Remove unused tunnel BW validation * Refactor DML21 initialization and configuration * Fix link override sequencing when switching between DIO/HPO * Ensure OLED minimum luminance Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: [FW Promotion] Release 0.1.17.0Taimur Hassan
Summary for changes in firmware: * Add AMD brightness adjustment feature for edp * Fix BL enable * Revise low power init sequence * Fix brightness delta after IPS1 entry * Adjusted DP blanking sequence Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Add DPP & HUBP reset if power gate enabled on DCN314Ivan Lipski
[WHY] On DCN314, using full screen application with enabled scaling like 150%, 175%, with overlay cursor, causes a second cursor to appear when changing planes. Dpp cache is used to track the HW cursor enable. Since power gate is disabled for hubp & dpp in DCN314, dpp_reset() zero'ed the dpp struct, while the dpp hardware was not power gated. So, when plane is changed in a full screen app, and the overlay cursor is enabled, the cache is cleared, so the cache does not represent the actual cursor state. [HOW] Added conditionals for dpp & hubp reset and their pg_control functions only if according power_gate flags are enabled. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Fix Link Override Sequencing When Switching Between DIO/HPOMichael Strauss
[WHY] When performing certain link maintenance compliance tests or forcing link settings, changing between 128b/132b and 8b/10b rates no longer works on some ASICs. Some rate divider updates only occur when we set timings or validate state, which is not performed currently when toggling DPMS to change rates. [HOW] Re-calculate dividers and reprogram audio when switching between DIO and HPO through DP compliance/escape code path. Add OTG disable/re-enable so we don't touch the clock while OTG is active. Acquire dcLock before forcing link settings to avoid thread synchronization errors due to added programming in escape code path and potential HPD interrupts. Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Mike Katsnelson <mike.katsnelson@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Don't allow OLED to go down to fully offMario Limonciello
[Why] OLED panels can be fully off, but this behavior is unexpected. [How] Ensure that minimum luminance is at least 1. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4338 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Added case for when RR equals panel's max RR using freesyncHarold Sun
[WHY] Rounding error sometimes occurs when the refresh rate is equal to a panel's max refresh rate, causing HDMI compliance failures. [HOW] Added a case so that we round up to avoid v_total_min to be below a panel's minimum bound. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Harold Sun <Harold.Sun@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Separate set_gsl from set_gsl_source_selectIlya Bakoulin
[Why/How] Separate the checks for set_gsl and set_gsl_source_select, since source_select may not be implemented/necessary. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Refactor DML21 Initialization and ConfigurationWenjing Liu
[Why & How] - Consolidated the initialization of DML21 parameters into a single function `dml21_populate_dml_init_params` to streamline the process and improve code readability. - Updated the function signatures in the header files to reflect changes in parameter passing for DML context. - Removed redundant debug option handling and integrated it into the new configuration population function. - Adjusted the DML21 initialization logic in the wrapper to accommodate the new structure, ensuring compatibility with different DCN versions. - Enhanced the handling of clock parameters and bounding box configurations from various sources, including hardware defaults and software policies. - Improved the clarity of the code by renaming functions and variables for better understanding of their purposes. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: prepare for new platformKarthi Kandasamy
[Why & How] Expose some function for new platform use Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Remove unused tunnel BW validationCruise Hung
[Why & How] The tunnel BW validation code has changed to the new one. Remove the unused code. The DP tunneling overhead is not updated in SST. Move updating DP tunneling overhead for both SST and MST. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: add null checkPeichen Huang
[WHY] Prevents null pointer dereferences to enhance function robustness [HOW] Adds early null check and return false if invalid. Reviewed-by: Cruise Hung <cruise.hung@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Add sanity checks for drm_edid_raw()Takashi Iwai
When EDID is retrieved via drm_edid_raw(), it doesn't guarantee to return proper EDID bytes the caller wants: it may be either NULL (that leads to an Oops) or with too long bytes over the fixed size raw_edid array (that may lead to memory corruption). The latter was reported actually when connected with a bad adapter. Add sanity checks for drm_edid_raw() to address the above corner cases, and return EDID_BAD_INPUT accordingly. Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid") Link: https://bugzilla.suse.com/show_bug.cgi?id=1236415 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 648d3f4d209725d51900d6a3ed46b7b600140cdf) Cc: stable@vger.kernel.org
2025-06-24drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL valueMario Limonciello
[Why] commit 16dc8bc27c2a ("drm/amd/display: Export full brightness range to userspace") adjusted the brightness range to scale to larger values, but missed updating AMDGPU_MAX_BL_LEVEL which is needed to make sure that scaling works properly with custom brightness curves. [How] As the change for max brightness of 0xFFFF only applies to devices supporting DC, use existing DC define MAX_BACKLIGHT_LEVEL. Fixes: 16dc8bc27c2a ("drm/amd/display: Export full brightness range to userspace") Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250623171114.1156451-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5b852044eb0d3e1f1c946d32e05fcb068e0a20a0) Cc: stable@vger.kernel.org
2025-06-24drm/amd/display: Add sanity checks for drm_edid_raw()Takashi Iwai
When EDID is retrieved via drm_edid_raw(), it doesn't guarantee to return proper EDID bytes the caller wants: it may be either NULL (that leads to an Oops) or with too long bytes over the fixed size raw_edid array (that may lead to memory corruption). The latter was reported actually when connected with a bad adapter. Add sanity checks for drm_edid_raw() to address the above corner cases, and return EDID_BAD_INPUT accordingly. Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid") Link: https://bugzilla.suse.com/show_bug.cgi?id=1236415 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Add a trace event for brightness programmingMario Limonciello
[Why] Brightness programming may involve a conversion of a user requested brightness against what was in a custom brightness curve. The values might not match what a user programmed. [How] Add a new trace event to show specific converted brightness values. Reviewed-by: Alex Hung <alex.hung@amd.com> Link: https://lore.kernel.org/r/20250623171114.1156451-2-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL valueMario Limonciello
[Why] commit 16dc8bc27c2a ("drm/amd/display: Export full brightness range to userspace") adjusted the brightness range to scale to larger values, but missed updating AMDGPU_MAX_BL_LEVEL which is needed to make sure that scaling works properly with custom brightness curves. [How] As the change for max brightness of 0xFFFF only applies to devices supporting DC, use existing DC define MAX_BACKLIGHT_LEVEL. Fixes: 16dc8bc27c2a ("drm/amd/display: Export full brightness range to userspace") Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250623171114.1156451-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Promote DAL to 3.2.339Taimur Hassan
Summary: * Improve USB4 bandwidth validation * dml clock calcuation with EQU Prefetch included * Tweaking udelay time to fix "failed to blank crtc!" error * Add LSDMA support to DMUB * Fix Coverity issue Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: [FW Promotion] Release 0.1.16.0Taimur Hassan
Summary for changes in firmware: * Add DMCUB IPS commands and command parser support * use OTG count to disable interrupts * Fix dmub_cmd header data boundary issue * remove the HW register override Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Add DMUB IPS command support for IPS residency toolsOvidiu Bunea
[why & how] Add DMUB IPS CMD interface for driver and DMU to communicate for IPS residency tools. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Add num_slices_h to set_dto_dscclk signatureIlya Bakoulin
Add the number of horizontal slices argument to allow configuring clock based on slice number. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: DML21 ReintegrationAustin Zheng
Update logging macros for detailed debugging Update structs to contain more detailed information Add HDMI 16 and 20 Gbps rates Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Rewording Mode Validation ResultFangzhi Zuo
It is normal to prune resolutions that exceed hw or bw limitation. Use error oriented wordings could cause misunderstanding. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: LSDMA supportOstrowski Rafal
[Why] Driver should be able to send LSDMA commands to DMCUB [How] Driver can now send LSDMA commands to DMCUB. DMCUB should process them and send to LSDMA controller. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ostrowski Rafal <rostrows@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Remove redundant macro of refresh rateWeiguang Li
[Why&How] Found that we add redundant macro on refresh rate when calculating vtotal, so we remove it. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Weiguang Li <wei-guang.li@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Fix 'failed to blank crtc!'Wen Chen
[why] DCN35 is having “DC: failed to blank crtc!” when running HPO test cases. It's caused by not having sufficient udelay time. [how] Replace the old wait_for_blank_complete function with fsleep function to sleep just until the next frame should come up. This way it doesn't poll in case the pixel clock or other clock was bugged or until vactive and the vblank are hit again. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wen Chen <Wen.Chen3@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Initialize mode_select to 0Alex Hung
[WHAT] mode_select was supposed to be initialized in mpc_read_gamut_remap but is not set in default case. This can cause indeterminate behaviors. This is reported as an UNINIT error by Coverity. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Add new DP tunnel bandwidth validationCruise Hung
[Why & How] Add new function for DP tunnel bandwidth validation. It uses the estimated BW and allocated BW to validate the timings. Reviewed-by: PeiChen Huang <peichen.huang@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Removed unnecessary commentAlvin Lee
Reviewed-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-24drm/amd/display: Include EQU Prefetch Bandwidth For Bandwidth CalculationsAustin Zheng
[Why] Pixel data bandwidth required in mode programming (MP) ends up being higher than what was calculated in mode support (MS) even though the prefetch bandwidths calculated in MP are lower than the MS ones. MP used a different equ prefetch schedule than MS which lead a slight difference in parameters. This resulted in the pixel data bandwidth in MP to be higher than MS. [How] Rename the RequiredPrefetchBWOTO term so it can be applied generically. Update the value with the EQU bandwidth if the EQU schedule is used. Get the max prefetch bandwidth that MS calculated and use it as part of the calculations for required bandwidth. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-23Merge 6.16-rc3 into driver-core-nextGreg Kroah-Hartman
We need the driver-core fixes that are in 6.16-rc3 into here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-18drm/amd/display: Check dce_hwseq before dereferencing itAlex Hung
[WHAT] hws was checked for null earlier in dce110_blank_stream, indicating hws can be null, and should be checked whenever it is used. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad) Cc: stable@vger.kernel.org
2025-06-18drm/amd/display: Export full brightness range to userspaceMario Limonciello
[WHY] Userspace currently is offered a range from 0-0xFF but the PWM is programmed from 0-0xFFFF. This can be limiting to some software that wants to apply greater granularity. [HOW] Convert internally to firmware values only when mapping custom brightness curves because these are in 0-0xFF range. Advertise full PWM range to userspace. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8dbd72cb790058ce52279af38a43c2b302fdd3e5) Cc: stable@vger.kernel.org
2025-06-18drm/amd/display: Only read ACPI backlight caps onceMario Limonciello
[WHY] Backlight caps are read already in amdgpu_dm_update_backlight_caps(). They may be updated by update_connector_ext_caps(). Reading again when registering backlight device may cause wrong values to be used. [HOW] Use backlight caps already registered to the dm. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 148144f6d2f14b02eaaa39b86bbe023cbff350bd) Cc: stable@vger.kernel.org
2025-06-18drm/amd/display: Fix RMCM programming seq errorsYihan Zhu
[WHY & HOW] Fix RMCM programming sequence errors and mapping issues to pass the RMCM test. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 11baa4975025033547f45f5894087a0dda6efbb8) Cc: stable@vger.kernel.org
2025-06-18drm/amd/display: Fix mpv playback corruption on westonAlex Hung
[WHAT] Severe video playback corruption is observed in the following setup: weston 14.0.90 (built from source) + mpv v0.40.0 with command: mpv bbb_sunflower_1080p_60fps_normal.mp4 --vo=gpu [HOW] ABGR16161616 needs to be included in dml2/2.1 translation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d023de809f85307ca819a9dbbceee6ae1f50e2ad) Cc: stable@vger.kernel.org
2025-06-18drm/amd/display: Add more checks for DSC / HUBP ONO guaranteesNicholas Kazlauskas
[WHY] For non-zero DSC instances it's possible that the HUBP domain required to drive it for sequential ONO ASICs isn't met, potentially causing the logic to the tile to enter an undefined state leading to a system hang. [HOW] Add more checks to ensure that the HUBP domain matching the DSC instance is appropriately powered. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit da63df07112e5a9857a8d2aaa04255c4206754ec) Cc: stable@vger.kernel.org
2025-06-18drm/amd/display: Get LTTPR IEEE OUI/Device ID From Closest LTTPR To HostMichael Strauss
[WHY] These fields are read for the explicit purpose of detecting embedded LTTPRs (i.e. between host ASIC and the user-facing port), and thus need to calculate the correct DPCD address offset based on LTTPR count to target the appropriate LTTPR's DPCD register space with these queries. [HOW] Cascaded LTTPRs in a link each snoop and increment LTTPR count when queried via DPCD read, so an LTTPR embedded in a source device (e.g. USB4 port on a laptop) will always be addressible using the max LTTPR count seen by the host. Therefore we simply need to use a recently added helper function to calculate the correct DPCD address to target potentially embedded LTTPRs based on the received LTTPR count. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 791897f5c77a2a65d0e500be4743af2ddf6eb061) Cc: stable@vger.kernel.org
2025-06-18drm/amd/display: Add dc cap for dp tunnelingPeichen Huang
[WHAT] 1. add dc cap for dp tunneling 2. add function to get index of host router Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Cruise Hung <cruise.hung@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 29e178d13979cf6fdb42c5fe2dfec2da2306c4ad) Cc: stable@vger.kernel.org
2025-06-18drm/amd/display: Promote DC to 3.2.338Taimur Hassan
DC v3.2.338 summary: * DML bug fixes * Add pwait to DMCUB hang reporting * New definitions / changes to prep for new platforms. * Misc cleanups Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/display: Removing Unused DPP FunctionsRyan Seto
[Why & How] The functions in this commit are defined for dpp401 but never used. Removing them as they are not necessary. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-11 05:58:32 +0000