| Age | Commit message (Collapse) | Author |
|---|
|
The CRC (Crystal Cove) PMIC, controls the panel enable and disable
signals for BYT for dsi panels. This is indicated in the VBT fields. Use
that to initialize and use GPIO based control for these signals.
v2: Use the newer gpiod interface(Alexandre)
v3: Remove the redundant checks and unused code (Ville)
v4: Moved PWM vs SoC backlight #defines to intel_bios.h (Jani)
CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
When resuming with dpms off, the following warn can happen:
[ 118.334082] ------------[ cut here ]------------
[ 118.334105] WARNING: CPU: 2 PID: 2274 at drivers/gpu/drm/i915/intel_display.c:6319 __intel_set_mode+0xae5/0xb90 [i915]()
[ 118.334106] WARN_ON(!crtc->state->enable)
[ 118.334137] Modules linked in: i915
[ 118.334139] CPU: 2 PID: 2274 Comm: kworker/u16:117 Not tainted 4.2.0-rc2-fixes+ #4148
[ 118.334140] Hardware name: LENOVO 2349AV8/2349AV8, BIOS G1ETA5WW (2.65 ) 04/15/2014
[ 118.334144] Workqueue: events_unbound async_run_entry_fn
[ 118.334147] ffffffffc017eef0 ffff8800ada93998 ffffffff817aa62a 0000000080000001
[ 118.334149] ffff8800ada939e8 ffff8800ada939d8 ffffffff810807e1 ffff8800ada939c8
[ 118.334151] ffff8800cea3b3d8 0000000000000000 ffff8800ad86b008 ffff880117705668
[ 118.334151] Call Trace:
[ 118.334155] [<ffffffff817aa62a>] dump_stack+0x4f/0x7b
[ 118.334157] [<ffffffff810807e1>] warn_slowpath_common+0x81/0xc0
[ 118.334158] [<ffffffff81080861>] warn_slowpath_fmt+0x41/0x50
[ 118.334173] [<ffffffffc0120375>] __intel_set_mode+0xae5/0xb90 [i915]
[ 118.334188] [<ffffffffc0121312>] ? intel_modeset_compute_config+0x52/0xb40 [i915]
[ 118.334191] [<ffffffff8144de53>] ? drm_atomic_set_fb_for_plane+0x63/0x80
[ 118.334205] [<ffffffffc01269d9>] intel_set_mode+0x29/0x60 [i915]
[ 118.334219] [<ffffffffc012730a>] intel_crtc_restore_mode+0x13a/0x1f0 [i915]
[ 118.334232] [<ffffffffc0101160>] ? gen6_write16+0x250/0x250 [i915]
[ 118.334246] [<ffffffffc01283ec>] intel_modeset_setup_hw_state+0x89c/0xcd0 [i915]
[ 118.334248] [<ffffffff8137d260>] ? pci_pm_thaw+0x90/0x90
[ 118.334255] [<ffffffffc00ac11b>] i915_drm_resume+0xcb/0x160 [i915]
[ 118.334262] [<ffffffffc00ac1d2>] i915_pm_resume+0x22/0x30 [i915]
[ 118.334263] [<ffffffff8137d2c3>] pci_pm_resume+0x63/0xa0
[ 118.334266] [<ffffffff81467550>] dpm_run_callback+0x70/0x420
[ 118.334267] [<ffffffff81467cbd>] device_resume+0x9d/0x1c0
[ 118.334269] [<ffffffff814673d0>] ? initcall_debug_start+0x60/0x60
[ 118.334270] [<ffffffff81467dfc>] async_resume+0x1c/0x50
[ 118.334271] [<ffffffff810a6a94>] async_run_entry_fn+0x34/0xd0
[ 118.334273] [<ffffffff8109d4ad>] process_one_work+0x1dd/0x7e0
[ 118.334275] [<ffffffff8109d41a>] ? process_one_work+0x14a/0x7e0
[ 118.334276] [<ffffffff8109daf9>] worker_thread+0x49/0x450
[ 118.334278] [<ffffffff8109dab0>] ? process_one_work+0x7e0/0x7e0
[ 118.334280] [<ffffffff810a3cb9>] kthread+0xf9/0x110
[ 118.334282] [<ffffffff810a3bc0>] ? insert_kthread_work+0x90/0x90
[ 118.334284] [<ffffffff817b414f>] ret_from_fork+0x3f/0x70
[ 118.334286] [<ffffffff810a3bc0>] ? insert_kthread_work+0x90/0x90
[ 118.334287] ---[ end trace 01f2cf6371b82d7a ]---
This warn is harmless, and can be fixed by not calling intel_crtc_disable when
the crtc is already disabled.
Reported-and-Tested-by: Jörg Otte <jrg.otte@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This reverts commit 19ee835cdb0b5a8eb11a68f25a51b8039d564488.
It breaks existing old userspace which doesn't handle UNKNOWN
swizzling correct. Yes UNKNOWN was a thing back in 2009 and probably
still is on some other platforms, but it still pretty clearly broke
the testers machine. If we want this we need to extend the ioctl with
new paramters that only new userspace looks at.
Cc: Harald Arnesen <harald@skogtun.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Harald Arnesen <harald@skogtun.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Previously only core DRM ioctls under the DRM_COMMAND_BASE were being
forwarded, but the drm.h header suggests (and reality confirms) ones
after (and including) DRM_COMMAND_END should be forwarded as well.
We need this to correctly forward the compat ioctl for the botched-up
addfb2.1 extension.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org # 4.1+
[danvet: Explain why this is suddenly needed and add cc: stable.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
On Sun, Jul 12, 2015 at 09:52:51AM -0700, Linus Torvalds wrote:
> On Sun, Jul 12, 2015 at 1:03 AM, Jörg Otte <jrg.otte@gmail.com> wrote:
> > BUG: unable to handle kernel NULL pointer dereference at 0000000000000009
> > IP: [<ffffffffbd3447bb>] 0xffffffffbd3447bb
>
> Ugh. Please enable KALLSYMS to get sane symbols.
>
> But yes, "crtc_state->base.active" is at offset 9 from "crtc_state",
> so it's pretty clearly just that change frm
>
> - if (intel_crtc->active) {
> + if (crtc_state->base.active) {
>
> and "crtc_state" is NULL.
>
> And the code very much knows that crtc_state can be NULL, since it's
> initialized with
>
> crtc_state = state->base.state ?
> intel_atomic_get_crtc_state(state->base.state,
> intel_crtc) : NULL;
>
> Tssk. Daniel? Should I just revert that commit dec4f799d0a4
> ("drm/i915: Use crtc_state->active in primary check_plane func") for
> now, or is there a better fix? Like just checking crtc_state for NULL?
Indeed embarrassing. I've missed that we still have 1 caller left that's
using the transitional helpers, and those don't fill out
plane_state->state backpointers to the global atomic update since there is
no global atomic update for transitional helpers. Below diff should fix
this - we need to preferentially check crts_state->active and if that's
not set intel_crtc->active should yield the right result for the one
remaining caller (it's in the crtc_disable paths).
This fixes a regression introduced in
commit dec4f799d0a4c9edae20512fa60b0a36f3299ca2
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Jul 7 11:15:47 2015 +0200
drm/i915: Use crtc_state->active in primary check_plane func
which was quickly reverted in
commit 01e2d0627a9a6edb24c37db45db5ecb31e9de808
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun Jul 12 15:00:20 2015 -0700
Revert "drm/i915: Use crtc_state->active in primary check_plane func"
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jörg Otte <jrg.otte@gmail.com>
Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
After the previous patch this flag will check always clear, as it's
never set for shmem backed and userptr objects, so we can remove it.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Yeah this isn't really fixes but it's a nice cleanup to
clarify the code but not really worth the hassle of backmerging. So
just add to -fixes, we're still early in -rc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This broken code was introduced in
commit aa7471d228eb6dfddd0d201ea9746d6a2020972a
Author: Jani Nikula <jani.nikula@intel.com>
Date: Wed Apr 1 11:15:21 2015 +0300
drm/i915: add i915 specific connector debugfs file for DPCD
v2: Drop hunk that accidentally crept in.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: François Valenduc <francoisvalenduc@gmail.com>
Reported-by: François Valenduc <francoisvalenduc@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
We have 3 types of DMA mappings for GEM objects:
1. physically contiguous for stolen and for objects needing contiguous
memory
2. DMA-buf mappings imported via a DMA-buf attach operation
3. SG DMA mappings for shmem backed and userptr objects
For 1. and 2. the lifetime of the DMA mapping matches the lifetime of the
corresponding backing pages and so in practice we create/release the
mapping in the object's get_pages/put_pages callback.
For 3. the lifetime of the mapping matches that of any existing GPU binding
of the object, so we'll create the mapping when the object is bound to
the first vma and release the mapping when the object is unbound from its
last vma.
Since the object can be bound to multiple vmas, we can end up creating a
new DMA mapping in the 3. case even if the object already had one. This
is not allowed by the DMA API and can lead to leaked mapping data and
IOMMU memory space starvation in certain cases. For example HW IOMMU
drivers (intel_iommu) allocate a new range from their memory space
whenever a mapping is created, silently overriding a pre-existing
mapping.
Fix this by moving the creation/removal of DMA mappings to the object's
get_pages/put_pages callbacks. These callbacks already check for and do
an early return in case of any nested calls. This way objects of the 3.
case also become more like the other object types.
I noticed this issue by enabling DMA debugging, which got disabled after
a while due to its internal mapping tables getting full. It also reported
errors in connection to random other drivers that did a DMA mapping for
an address that was previously mapped by i915 but was never released.
Besides these diagnostic messages and the memory space starvation
problem for IOMMUs, I'm not aware of this causing a real issue.
The fix is based on a patch from Chris.
v2:
- move the DMA mapping create/remove calls to the get_pages/put_pages
callbacks instead of adding new callbacks for these (Chris)
v3:
- also fix the get_page cache logic on the userptr async path (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The hang checker needs to inspect whether or not the ring request list is empty
as well as if the given engine has reached or passed the most recently
submitted request. The problem with this is that the hang checker cannot grab
the struct_mutex, which is required in order to safely inspect requests since
requests might be deallocated during inspection. In the past we've had kernel
panics due to this very unsynchronized access in the hang checker.
One solution to this problem is to not inspect the requests directly since
we're only interested in the seqno of the most recently submitted request - not
the request itself. Instead the seqno of the most recently submitted request is
stored separately, which the hang checker then inspects, circumventing the
issue of synchronization from the hang checker entirely.
This fixes a regression introduced in
commit 44cdd6d219bc64f6810b8ed0023a4d4db9e0fe68
Author: John Harrison <John.C.Harrison@Intel.com>
Date: Mon Nov 24 18:49:40 2014 +0000
drm/i915: Convert 'ring_idle()' to use requests not seqnos
v2 (Chris Wilson):
- Pass current engine seqno to ring_idle() from i915_hangcheck_elapsed() rather
than compute it over again.
- Remove extra whitespace.
Issue: VIZ-5998
Signed-off-by: Tomas Elf <tomas.elf@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add regressing commit citation provided by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
[ 1572.417121] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 1572.421010] IP: [<ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915]
[ 1572.424970] PGD 1766a3067 PUD 1767a2067 PMD 0
[ 1572.428892] Oops: 0000 [#1] SMP
[ 1572.432787] Modules linked in: ipv6 dm_mod iTCO_wdt iTCO_vendor_support snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore serio_raw pcspkr lpc_ich i2c_i801 mfd_core battery ac acpi_cpufreq i915 button video drm_kms_helper drm
[ 1572.441720] CPU: 2 PID: 18853 Comm: kworker/u8:0 Not tainted 4.0.0_kcloud_3f0360_20150429+ #588
[ 1572.446298] Workqueue: i915 i915_gem_retire_work_handler [i915]
[ 1572.450876] task: ffff880002f428f0 ti: ffff880035724000 task.ti: ffff880035724000
[ 1572.455557] RIP: 0010:[<ffffffffa00b2514>] [<ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915]
[ 1572.460423] RSP: 0018:ffff880035727ce8 EFLAGS: 00010286
[ 1572.465262] RAX: ffff880073f1643c RBX: ffff880002da9058 RCX: ffff880073e5db40
[ 1572.470179] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880035727ce8
[ 1572.475107] RBP: ffff88007bb11a00 R08: 0000000000000000 R09: 0000000000000000
[ 1572.480034] R10: 0000000000362200 R11: 0000000000000008 R12: 0000000000000000
[ 1572.484952] R13: ffff880035727d78 R14: ffff880002dc1c98 R15: ffff880002dc1dc8
[ 1572.489886] FS: 0000000000000000(0000) GS:ffff88017fd00000(0000) knlGS:0000000000000000
[ 1572.494883] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1572.499859] CR2: 0000000000000000 CR3: 000000017572a000 CR4: 00000000001006e0
[ 1572.504842] Stack:
[ 1572.509834] ffff88017b0090c0 ffff880073f16438 ffff880002da9058 ffff880073f1643c
[ 1572.514904] 0000000000000246 ffff880100000000 ffff88007bb11a00 ffff880002ddeb10
[ 1572.519985] ffff8801759f79c0 ffffffffa0092ff0 0000000000000000 ffff88007bb11a00
[ 1572.525049] Call Trace:
[ 1572.530093] [<ffffffffa0092ff0>] ? i915_gem_context_free+0xa8/0xc1 [i915]
[ 1572.535227] [<ffffffffa009b969>] ? i915_gem_request_free+0x4e/0x50 [i915]
[ 1572.540347] [<ffffffffa00b5533>] ? intel_execlists_retire_requests+0x14c/0x159 [i915]
[ 1572.545500] [<ffffffffa009d9ea>] ? i915_gem_retire_requests+0x9d/0xeb [i915]
[ 1572.550664] [<ffffffffa009dd8c>] ? i915_gem_retire_work_handler+0x4c/0x61 [i915]
[ 1572.555825] [<ffffffff8104ca7f>] ? process_one_work+0x1b2/0x31d
[ 1572.560951] [<ffffffff8104d278>] ? worker_thread+0x24d/0x339
[ 1572.566033] [<ffffffff8104d02b>] ? cancel_delayed_work_sync+0xa/0xa
[ 1572.571140] [<ffffffff81050b25>] ? kthread+0xce/0xd6
[ 1572.576191] [<ffffffff81050a57>] ? kthread_create_on_node+0x162/0x162
[ 1572.581228] [<ffffffff8179b3c8>] ? ret_from_fork+0x58/0x90
[ 1572.586259] [<ffffffff81050a57>] ? kthread_create_on_node+0x162/0x162
[ 1572.591318] Code: de 48 89 e7 e8 09 4d 00 e1 48 85 c0 74 27 48 89 68 10 48 8b 55 38 48 89 e7 48 89 50 18 48 8b 55 10 48 8b 12 48 8b 12 48 8b 52 38 <8b> 12 89 50 08 e8 95 4d 00 e1 48 83 c4 30 5b 5d 41 5c c3 41 55
[ 1572.596981] RIP [<ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915]
[ 1572.602464] RSP <ffff880035727ce8>
[ 1572.607911] CR2: 0000000000000000
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90112#c23
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This reverts commit dec4f799d0a4c9edae20512fa60b0a36f3299ca2.
Jörg Otte reports a NULL pointder dereference due to this commit, as
'crtc_state' very much can be NULL:
crtc_state = state->base.state ?
intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;
So the change to test 'crtc_state->base.active' cannot possibly be
correct as-is.
There may be some other minimal fix (like just checking crtc_state for
NULL), but I'm just reverting it now for the rc2 release, and people
like Daniel Vetter who actually know this code will figure out what the
right solution is in the longer term.
Reported-and-bisected-by: Jörg Otte <jrg.otte@gmail.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Stolen gets trashed during hibernation, so storing contexts there
is not a very good idea. On my IVB machines this leads to a totally
dead GPU on resume. A reboot is required to resurrect it. So let's
not store contexts where they will get trampled.
This reverts commit 149c86e74fe44dcbac5e9f8d145c5fbc5dc21261.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The old style of memory interleaving swizzled upto the end of the
first even bank of memory, and then used the remainder as unswizzled on
the unpaired bank - i.e. swizzling is not constant for all memory. This
causes problems when we try to migrate memory and so the kernel prevents
migration at all when we detect L-shaped inconsistent swizzling.
However, this issue also extends to userspace who try to manually detile
into memory as the swizzling for an individual page is unknown (it
depends on its physical address only known to the kernel), userspace
cannot correctly swizzle objects.
v2: Mark the global swizzling as unknown rather than adjust the value
reported to userspace.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Since
commit 8c7b5ccb729870e606321b3703e2c2e698c49a95
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Tue Apr 21 17:13:19 2015 +0300
drm/i915: Use atomic helpers for computing changed flags
we compute the plane state for a modeset before actually committing
any changes, which means crtc->active won't be correct yet. Looking at
future work in the modeset conversion targetting 4.3 the only places
where crtc_state->active isn't accurate is when disabling other CRTCs
than the one the modeset is for (when stealing connectors). Which
isn't the case here. And that's also confirmed by an audit, we do
unconditionally update crtc_state->active for the current pipe.
We also don't need to update any other plane check functions since we
only ever add the primary state to the modeset update right now.
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This was lost in
commit ce22dba92de22e951dee2ff89937a39754d2dd91
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Tue Apr 21 17:12:56 2015 +0300
drm/i915: Move toggling planes out of crtc enable/disable.
and we still need that crtc->active check since the overall modeset
flow doesn't yet take dpms state into account properly. Fixes WARNING
backtraces on at least bdw/hsw due to the ips disabling code being
upset about being run on a switched-off pipe.
We don't need a corresponding change on the enable side since with the
old setCrtc semantics we always force-enable the pipe after a modeset.
And the dpms function intel_crtc_control already checks for ->active.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
When rotated and partial views were added no one spotted the resume
path which assumes only one GGTT VMA per object and hence is now
skipping rebind of alternative views.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Ville noticed that the PLL HW readout code parsed the fractional
divider value as if the fractional divider was always enabled. This may
result in a port clock state check mismatch if the preceeding modeset
disabled the fractional divider, but left a non-zero divider value in
the register.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
git://anongit.freedesktop.org/drm-intel
Pull intel drm fixes from Jani Nikula:
"Almost all of it is regression fixes all around, with cc: stable, and
then there's Ander's fix for one of the warnings you reported. We're
still working on the rest"
[ Dave is on vacation, and Jani is heading out on vacation too ]
* tag 'drm-intel-next-fixes-2015-07-02' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Clear pipe's pll hw state in hsw_dp_set_ddi_pll_sel()
drm/i915: fix backlight after resume on 855gm
agp/intel: Fix typo in needs_ilk_vtd_wa()
drm/i915/ppgtt: Break loop in gen8_ppgtt_clear_range failure path
drm/i915: Fix IPS related flicker
|
|
Similarly to what is done for SKL, clear the dpll_hw_state of the pipe
config in hsw_dp_set_ddi_pll_sel(), since it main contain stale values.
That can happen if a crtc that was previously driving an HDMI connector
switches to a DP connector. In that case, the wrpll field was left with
its old value, leading to warnings like the one below:
[drm:check_crtc_state [i915]] *ERROR* mismatch in dpll_hw_state.wrpll (expected 0xb035061f, found 0x00000000)
------------[ cut here ]------------
WARNING: CPU: 1 PID: 767 at drivers/gpu/drm/i915/intel_display.c:12324 check_crtc_state+0x975/0x10b0 [i915]()
pipe state doesn't match!
This regression was indroduced in
commit dd3cd74acf12723045a64f1f2c6298ac7b34a5d5
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Fri May 15 13:34:29 2015 +0300
drm/i915: Don't overwrite (e)DP PLL selection on SKL
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Some 855gm models (at least ThinkPad X40) regressed because of
commit b0cd324faed23d10d66ba6ade66579c681feef6f
Author: Jani Nikula <jani.nikula@intel.com>
Date: Wed Nov 12 16:25:43 2014 +0200
drm/i915: don't save/restore backlight hist ctl registers
which tried to make our driver more robust by not blindly saving and
restoring registers, but it failed to take into account
commit 0eb96d6ed38430b72897adde58f5477a6b71757a
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed Oct 14 12:33:41 2009 -0700
drm/i915: save/restore BLC histogram control reg across suspend/resume
Fix the regression by enabling hist ctl on gen2.
v2: Improved the comment.
v3: Improved the comment, again.
Reported-and-tested-by: Philipp Gesang <phg@phi-gamma.net>
References: http://mid.gmane.org/20150623222648.GD12335@acheron
Fixes: b0cd324faed2 ("drm/i915: don't save/restore backlight hist ctl registers")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.2.
I've one other new driver from freescale on my radar, it's been posted
and reviewed, I'd just like to get someone to give it a last look, so
maybe I'll send it or maybe I'll leave it.
There is no major nouveau changes in here, Ben was working on
something big, and we agreed it was a bit late, there wasn't anything
else he considered urgent to merge.
There might be another msm pull for some bits that are waiting on
arm-soc, I'll see how we time it.
This touches some "of" stuff, acks are in place except for the fixes
to the build in various configs,t hat I just applied.
Summary:
New drivers:
- virtio-gpu:
KMS only pieces of driver for virtio-gpu in qemu.
This is just the first part of this driver, enough to run
unaccelerated userspace on. As qemu merges more we'll start
adding the 3D features for the virgl 3d work.
- amdgpu:
a new driver from AMD to driver their newer GPUs. (VI+)
It contains a new cleaner userspace API, and is a clean
break from radeon moving forward, that AMD are going to
concentrate on. It also contains a set of register headers
auto generated from AMD internal database.
core:
- atomic modesetting API completed, enabled by default now.
- Add support for mode_id blob to atomic ioctl to complete interface.
- bunch of Displayport MST fixes
- lots of misc fixes.
panel:
- new simple panels
- fix some long-standing build issues with bridge drivers
radeon:
- VCE1 support
- add a GPU reset counter for userspace
- lots of fixes.
amdkfd:
- H/W debugger support module
- static user-mode queues
- support killing all the waves when a process terminates
- use standard DECLARE_BITMAP
i915:
- Add Broxton support
- S3, rotation support for Skylake
- RPS booting tuning
- CPT modeset sequence fixes
- ns2501 dither support
- enable cmd parser on haswell
- cdclk handling fixes
- gen8 dynamic pte allocation
- lots of atomic conversion work
exynos:
- Add atomic modesetting support
- Add iommu support
- Consolidate drm driver initialization
- and MIC, DECON and MIPI-DSI support for exynos5433
omapdrm:
- atomic modesetting support (fixes lots of things in rewrite)
tegra:
- DP aux transaction fixes
- iommu support fix
msm:
- adreno a306 support
- various dsi bits
- various 64-bit fixes
- NV12MT support
rcar-du:
- atomic and misc fixes
sti:
- fix HDMI timing complaince
tilcdc:
- use drm component API to access tda998x driver
- fix module unloading
qxl:
- stability fixes"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (872 commits)
drm/nouveau: Pause between setting gpu to D3hot and cutting the power
drm/dp/mst: close deadlock in connector destruction.
drm: Always enable atomic API
drm/vgem: Set unique to "vgem"
of: fix a build error to of_graph_get_endpoint_by_regs function
drm/dp/mst: take lock around looking up the branch device on hpd irq
drm/dp/mst: make sure mst_primary mstb is valid in work function
of: add EXPORT_SYMBOL for of_graph_get_endpoint_by_regs
ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi'
drm/atomic: Don't set crtc_state->enable manually
drm/exynos: dsi: do not set TE GPIO direction by input
drm/exynos: dsi: add support for MIC driver as a bridge
drm/exynos: dsi: add support for Exynos5433
drm/exynos: dsi: make use of array for clock access
drm/exynos: dsi: make use of driver data for static values
drm/exynos: dsi: add macros for register access
drm/exynos: dsi: rename pll_clk to sclk_clk
drm/exynos: mic: add MIC driver
of: add helper for getting endpoint node of specific identifiers
drm/exynos: add Exynos5433 decon driver
...
|
|
If for some reason [1], the page directory/table does not exist, clear_range
would end up in an infinite while loop.
Introduced by commit 06fda602dbca ("drm/i915: Create page table allocators").
[1] This is already being addressed in one of Mika's patches:
http://mid.gmane.org/1432314314-23530-17-git-send-email-mika.kuoppala@intel.com
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Reported-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We cannot let IPS enabled with no plane on the pipe:
BSpec: "IPS cannot be enabled until after at least one plane has
been enabled for at least one vertical blank." and "IPS must be
disabled while there is still at least one plane enabled on the
same pipe as IPS." This restriction apply to HSW and BDW.
However a shortcut path on update primary plane function
to make primary plane invisible by setting DSPCTRL to 0
was leting IPS enabled while there was no
other plane enabled on the pipe causing flickerings that we were
believing that it was caused by that other restriction where
ips cannot be used when pixel rate is greater than 95% of cdclok.
v2: Don't mess with Atomic path as pointed out by Ville.
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=85583
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a busy development cycle at this time, as you can see a wide
range of changes in diffstat. There are no big changes but many
refactoring and improvements. Here we go some highlights:
ALSA core:
- Procfs codes were cleaned up to use seq_file
- Procfs can be opt out via Kconfig (only for EXPERT)
- Two types of jack API were unified finally; now both kctl and input
jack devs are handled via a single function call.
HD-audio:
- Continued code restructuring for the future ASoC driver; now HDA
controller driver is split to a core helper module.
- Preliminary codes for Skylake audio support in HDA core.
- Proper i915 gfx power well management for SKL & co
- Enabled runtime PM as default for Intel HDMI/DP codecs
- Newer Tegra chip supports
- More quirks for Dell headsets, Alienware (with CA0132), etc.
- A couple of DRM ELD helper API functions
ASoC:
- Support for loading ASoC topology maps from firmware, intended to
be used to allow self-describing DSP firmware images to be built
which can map controls added by the DSP to userspace without the
kernel needing to know about individual DSP firmwares
- Lots of refactoring to avoid direct access to snd_soc_codec where
it's not needed supporting future refactoring
- Big refactoring, cleanup and enhancement for the Wolfson ADSP
driver
- Cleanup series for TI TAS2552 and R-CAR drivers
- Fixes and improvements on RT56xx codecs
- Support for TI TAS571x power amplifiers
- Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
- Support for x86 systems with RT5650 and Qualcomm Storm
- Support for Mediatek AFE (Audio Front End) unit
- Other various small fixes to ASoC codec drivers
Firewire:
- Enhanced to allow non-blocking streams to use timestamp
synchronization
- Improve support for DM1500 and BeBoBv3
Misc:
- Cleanup of old pci API functions over all PCI sound drivers
- Fix long-standing regression of the old powermac i2c setup"
* tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (533 commits)
ALSA: pcm: Fix pcm_class sysfs output
ALSA: hda-beep: Update authors dead email address
ASoC: wm_adsp: Move DSP Rate controls into the codec
ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case
ALSA: hda: provide default bus io ops extended hdac
ALSA: hda: add hda link cleanup routine
ALSA: hda: add hdac_ext stream creation and cleanup routines
ASoC: rsrc-card: remove unused ret
ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core
ASoC: mediatek: Add machine driver for rt5650 rt5676 codec
ASoC: mediatek: Add machine driver for MAX98090 codec
ASoC: mediatek: Add AFE platform driver
ASoC: rsnd: remove io from rsnd_mod
ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working()
ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr()
ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"The rework of backlight interface selection API from Hans de Goede
stands out from the number of commits and the number of affected
places perspective. The cpufreq core fixes from Viresh Kumar are
quite significant too as far as the number of commits goes and because
they should reduce CPU online/offline overhead quite a bit in the
majority of cases.
From the new featues point of view, the ACPICA update (to upstream
revision 20150515) adding support for new ACPI 6 material to ACPICA is
the one that matters the most as some new significant features will be
based on it going forward. Also included is an update of the ACPI
device power management core to follow ACPI 6 (which in turn reflects
the Windows' device PM implementation), a PM core extension to support
wakeup interrupts in a more generic way and support for the ACPI _CCA
device configuration object.
The rest is mostly fixes and cleanups all over and some documentation
updates, including new DT bindings for Operating Performance Points.
There is one fix for a regression introduced in the 4.1 cycle, but it
adds quite a number of lines of code, it wasn't really ready before
Thursday and you were on vacation, so I refrained from pushing it on
the last minute for 4.1.
Specifics:
- ACPICA update to upstream revision 20150515 including basic support
for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
_MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation in
Windows (Rafael J Wysocki).
- rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling of
DMI quirks that may be involved in that and to make the code
generally more straightforward (Hans de Goede).
- fixes for the ACPI Embedded Controller (EC) driver related to the
handling of EC transactions (Lv Zheng).
- fix for a regression related to the ACPI resources management and
resulting from a recent change of ACPI initialization code ordering
(Rafael J Wysocki).
- fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the code
that switches the platform over to the ACPI mode too early in the
initialization sequence (Rafael J Wysocki).
- support for the ACPI _CCA device configuration object related to
DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- assorted cleanups related to ACPI (Dominik Brodowski, Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- fix for a long-standing issue causing General Protection Faults to
be generated occasionally on return to user space after resume from
ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- fix to make the suspend core code return -EBUSY consistently in all
cases when system suspend is aborted due to wakeup detection (Ruchi
Kandoi).
- support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- new tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- wakeup sources framework enhancements (Jin Qian).
- new macro for noirq system PM callbacks (Grygorii Strashko).
- assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should reduce
the overhead of these operations quite a bit, unless the CPU in
question is physically going away (Viresh Kumar, Saravana Kannan).
- serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- new Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- updates for the common clock operations support code in the PM core
(Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski)"
* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
x86: Load __USER_DS into DS/ES after resume
PM / OPP: Add binding for 'opp-suspend'
PM / OPP: Allow multiple OPP tables to be passed via DT
PM / OPP: Add new bindings to address shortcomings of existing bindings
ACPI: Constify ACPI device IDs in documentation
ACPI / enumeration: Document the rules regarding the PRP0001 device ID
ACPI / video: Make acpi_video_unregister_backlight() private
acpi-video-detect: Remove old API
toshiba-acpi: Port to new backlight interface selection API
thinkpad-acpi: Port to new backlight interface selection API
sony-laptop: Port to new backlight interface selection API
samsung-laptop: Port to new backlight interface selection API
msi-wmi: Port to new backlight interface selection API
msi-laptop: Port to new backlight interface selection API
intel-oaktrail: Port to new backlight interface selection API
ideapad-laptop: Port to new backlight interface selection API
fujitsu-laptop: Port to new backlight interface selection API
eeepc-laptop: Port to new backlight interface selection API
dell-wmi: Port to new backlight interface selection API
...
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
fix warning introduced in last -fixes
* tag 'drm-intel-next-fixes-2015-06-22' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Silence compiler warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes are:
- lockless wakeup support for futexes and IPC message queues
(Davidlohr Bueso, Peter Zijlstra)
- Replace spinlocks with atomics in thread_group_cputimer(), to
improve scalability (Jason Low)
- NUMA balancing improvements (Rik van Riel)
- SCHED_DEADLINE improvements (Wanpeng Li)
- clean up and reorganize preemption helpers (Frederic Weisbecker)
- decouple page fault disabling machinery from the preemption
counter, to improve debuggability and robustness (David
Hildenbrand)
- SCHED_DEADLINE documentation updates (Luca Abeni)
- topology CPU masks cleanups (Bartosz Golaszewski)
- /proc/sched_debug improvements (Srikar Dronamraju)"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
sched/deadline: Remove needless parameter in dl_runtime_exceeded()
sched: Remove superfluous resetting of the p->dl_throttled flag
sched/deadline: Drop duplicate init_sched_dl_class() declaration
sched/deadline: Reduce rq lock contention by eliminating locking of non-feasible target
sched/deadline: Make init_sched_dl_class() __init
sched/deadline: Optimize pull_dl_task()
sched/preempt: Add static_key() to preempt_notifiers
sched/preempt: Fix preempt notifiers documentation about hlist_del() within unsafe iteration
sched/stop_machine: Fix deadlock between multiple stop_two_cpus()
sched/debug: Add sum_sleep_runtime to /proc/<pid>/sched
sched/debug: Replace vruntime with wait_sum in /proc/sched_debug
sched/debug: Properly format runnable tasks in /proc/sched_debug
sched/numa: Only consider less busy nodes as numa balancing destinations
Revert 095bebf61a46 ("sched/numa: Do not move past the balance point if unbalanced")
sched/fair: Prevent throttling in early pick_next_task_fair()
preempt: Reorganize the notrace definitions a bit
preempt: Use preempt_schedule_context() as the official tracing preemption point
sched: Make preempt_schedule_context() function-tracing safe
x86: Remove cpu_sibling_mask() and cpu_core_mask()
x86: Replace cpu_**_mask() with topology_**_cpumask()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Further updates for v4.2
There's a bunch of additional updates and fixes that came in since my
orignal pull request here, including DT support for rt5645 and fairly
large serieses of cleanups and improvements to tas2552 and rcar.
|
|
Silence the following -Wmaybe-uninitialized warnings and make the code
more clear.
drivers/gpu/drm/i915/intel_display.c: In function ‘__intel_set_mode’:
drivers/gpu/drm/i915/intel_display.c:11844:14: warning: ‘crtc_state’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return state->mode_changed || state->active_changed;
^
drivers/gpu/drm/i915/intel_display.c:11854:25: note: ‘crtc_state’ was declared here
struct drm_crtc_state *crtc_state;
^
drivers/gpu/drm/i915/intel_display.c:11868:6: warning: ‘crtc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (crtc != intel_encoder->base.crtc)
^
drivers/gpu/drm/i915/intel_display.c:11853:19: note: ‘crtc’ was declared here
struct drm_crtc *crtc;
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
i915 fixes for stuff in next
* tag 'drm-intel-next-fixes-2015-06-18' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Don't set enabled value of all CRTCs when restoring the mode
drm/i915: Don't update staged config during force restore modesets
drm/i915: Don't check modeset state in the hw state force restore path
drm/i915: Add SCRATCH1 and ROW_CHICKEN3 to the register whitelist.
drm/i915: Extend the parser to check register writes against a mask/value pair.
drm/i915: Fix command parser to validate multiple register access with the same command.
drm/i915: Don't skip request retirement if the active list is empty
|
|
This results in a nice cleanup, as we can replace the complicated logic
from should_ignore_backlight_request() with a simple check for the type
being native.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The code in intel_crtc_restore_mode() sets the enabled value of all the
CRTCs when restoring the mode after a suspend/resume cycle. When more
than one CRTC is enabled, that causes drm_atomic_helper_check_modeset()
to fail if there is more than one pipe enabled, since all but one CRTC
has valid connector data. Instead, set only the enabled value for the
CRTC passed as an argument.
v2: Don't leak atomic state. (Matt)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90468
References: https://bugs.freedesktop.org/show_bug.cgi?id=90396
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
|
|
The force restore path relies on the staged config to preserve the
configuration used before a suspend/resume cycle. The update done to it
in intel_modeset_fixup_state() would cause that information to be lost
after the first modeset, making it impossible to restore the modes for
pipes B and C.
References: https://bugs.freedesktop.org/show_bug.cgi?id=90468
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Since the force restore logic will restore the CRTCs state one at a
time, it is possible that the state will be inconsistent until the whole
operation finishes. A call to intel_modeset_check_state() is done once
it's over, so don't check the state multiple times in between. This
regression was introduced in:
commit 7f27126ea3db6ade886f18fd39caf0ff0cd1d37f
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed Nov 5 14:26:06 2014 -0800
drm/i915: factor out compute_config from __intel_set_mode v3
v2: Rename check parameter to force_restore. (Matt)
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94431
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Only bit 27 of SCRATCH1 and bit 6 of ROW_CHICKEN3 are allowed to be
set because of security-sensitive bits we don't want userspace to mess
with. On HSW hardware the whitelisted bits control whether atomic
read-modify-write operations are performed on L3 or on GTI, and when
set to L3 (which can be 10x-30x better performing than on GTI,
depending on the application) require great care to avoid a system
hang, so we currently program them to be handled on GTI by default.
Beignet can immediately start taking advantage of this change to
enable L3 atomics. Mesa should eventually switch to L3 atomics too,
but a number of non-trivial changes are still required so it will
continue using GTI atomics for now.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
In some cases it might be unnecessary or dangerous to give userspace
the right to write arbitrary values to some register, even though it
might be desirable to give it control of some of its bits. This patch
extends the register whitelist entries to contain a mask/value pair in
addition to the register offset. For registers with non-zero mask,
any LRM writes and LRI writes where the bits of the immediate given by
the mask don't match the specified value will be rejected.
This will be used in my next patch to grant userspace partial write
access to some sensitive registers.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
same command.
Until now the software command checker assumed that commands could
read or write at most a single register per packet. This is not
necessarily the case, MI_LOAD_REGISTER_IMM expects a variable-length
list of offset/value pairs and writes them in sequence. The previous
code would only check whether the first entry was valid, effectively
allowing userspace to write unrestricted registers of the MMIO space
by sending a multi-register write with a legal first register, with
potential security implications on Gen6 and 7 hardware.
Fix it by extending the drm_i915_cmd_descriptor table to represent
multi-register access and making validate_cmd() iterate for all
register offsets present in the command packet.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This reverts commit 0aedb1626566efd72b369c01992ee7413c82a0c5.
I messed things up while applying [1] to drm-intel-fixes. Rectify.
[1] http://mid.gmane.org/1432827156-9605-1-git-send-email-ville.syrjala@linux.intel.com
Fixes: 0aedb1626566 ("drm/i915: Don't skip request retirement if the active list is empty")
Cc: stable@vger.kernel.org
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Apparently we can have requests even if though the active list is empty,
so do the request retirement regardless of whether there's anything
on the active list.
The way it happened here is that during suspend intel_ring_idle()
notices the olr hanging around and then proceeds to get rid of it by
adding a request. However since there was nothing on the active lists
i915_gem_retire_requests() didn't clean those up, and so the idle work
never runs, and we leave the GPU "busy" during suspend resulting in a
WARN later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
With the introduction of multiple views of an obj in the same vm, each
vma was taught to cache its copy of the pages (so that different views
could have different page arrangements). However, this missed decoupling
those vma->ggtt_view.pages when the vma released its reference on the
obj->pages. As we don't always free the vma, this leads to a possible
scenario (e.g. execbuffer interrupted by the shrinker) where the vma
points to a stale obj->pages, and explodes.
Fixes regression from commit fe14d5f4e5468c5b80a24f1a64abcbe116143670
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Wed Dec 10 17:27:58 2014 +0000
drm/i915: Infrastructure for supporting different GGTT views per object
Tvrtko says, if someone else will be confused how this can happen, key
is the reservation execbuffer path. That puts the VMA on the exec_list
which prevents i915_vma_unbind and i915_gem_vma_destroy from fully
destroying the VMA. So the VMA is left existing as an empty object in
the list - unbound and disassociated with the backing store. Kind of a
cached memory object. And then re-using it needs to clear the cached
pages pointer which is fixed above.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1227892
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
[Jani: Added Tvrtko's explanation to commit message.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
firmware name fix
* tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel:
drm/i915/skl: Fix DMC API version in firmware file name
|
|
Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI
devices, as they do not have a sink device in them to respond to any AUX
traffic. When probing these dongles over the DDC, sometimes they will
NAK the first attempt even though the transaction is valid and they
support the DDC protocol. The retry loop inside of
drm_do_probe_ddc_edid() would normally catch this case and try the
transaction again, resulting in success.
That, however, was thwarted by the fix for [1]:
commit 9292f37e1f5c79400254dca46f83313488093825
Author: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date: Thu Jan 5 09:34:28 2012 -0200
drm: give up on edid retries when i2c bus is not responding
This added code to exit immediately if the return code from the
i2c_transfer function was -ENXIO in order to reduce the amount of time
spent in waiting for unresponsive or disconnected devices. That was
possible because the underlying i2c bit banging algorithm had retries of
its own (which, of course, were part of the reason for the bug the
commit fixes).
Since its introduction in
commit f899fc64cda8569d0529452aafc0da31c042df2e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Jul 20 15:44:45 2010 -0700
drm/i915: use GMBUS to manage i2c links
we've been flipping back and forth enabling the GMBUS transfers, but
we've settled since then. The GMBUS implementation does not do any
retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop
on first encounter of -ENXIO. This, combined with Eugeni's commit, broke
the retry on -ENXIO.
Retry GMBUS once on -ENXIO on first message to mitigate the issues with
passive adapters.
This patch is based on the work, and commit message, by Todd Previte
<tprevite@gmail.com>.
[1] https://bugs.freedesktop.org/show_bug.cgi?id=41059
v2: Don't retry if using bit banging.
v3: Move retry within gmbux_xfer, retry only on first message.
v4: Initialize GMBUS0 on retry (Ville).
v5: Take index reads into account (Ville).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924
Cc: Todd Previte <tprevite@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: Oliver Grafe <oliver.grafe@ge.com> (v2)
Tested-by: Jim Bride <jim.bride@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v4.2
The big thing this release has been Liam's addition of topology support
to the core. We've also seen quite a bit of driver work and the
continuation of Lars' refactoring for component support.
- Support for loading ASoC topology maps from firmware, intended to be
used to allow self-describing DSP firmware images to be built which
can map controls added by the DSP to userspace without the kernel
needing to know about individual DSP firmwares.
- Lots of refactoring to avoid direct access to snd_soc_codec where
it's not needed supporting future refactoring.
- Big refactoring and cleanup serieses for the Wolfson ADSP and TI
TAS2552 drivers.
- Support for TI TAS571x power amplifiers.
- Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs.
- Support for x86 systems with RT5650 and Qualcomm Storm.
|
|
In the commit below, I missed the connector allocation in the function
intel_sdvo_analog_init(), leading to those connectors to have a NULL
state pointer.
commit 08d9bc920d465bbbbd762cac9383249c19bf69a2
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Fri Apr 10 10:59:10 2015 +0300
drm/i915: Allocate connector state together with the connectors
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
04 is the minor version. API version is ver1.
So let's follow same scheme used on published version at 01.org.
If really needed the minor version a follow-up updated will be
done. But for now we need to move fwd and unblock end users.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
commit 65ca7514e21adbee25b8175fc909759c735d00ff
Author: Damien Lespiau <damien.lespiau@intel.com>
Date: Mon Feb 9 19:33:22 2015 +0000
drm/i915/skl: Implement WaBarrierPerformanceFixDisable
got misapplied and the code landed in chv_init_workarounds() instead of
the intended skl_init_workarounds(). Move it over to the right place.
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add all missing platforms handled by intel_set_memory_cxsr() to the
i915_sr_status debugfs entry.
v2: Add G4X too. (Ville)
Clarify the change also affects CHV. (Ander)
References: https://bugs.freedesktop.org/show_bug.cgi?id=89792
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
After GPU reset, HW is losing the address of HWS page in the register.
The page itself is valid except that HW is not aware of its location.
[ 64.368623] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
[ 64.368655] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
[ 64.368681] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
[ 64.368704] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
This patch reloads this value into the register during ring init.
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Linux 4.1-rc6
backmerge 4.1-rc6 as some of the later pull reqs are based on newer bases
and I'd prefer to do the fixup myself.
|
|
Conflicts:
arch/sparc/include/asm/topology_64.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
