summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2020-09-07drm/vc4: crtc: Move the CRTC disable outMaxime Ripard
We'll need to reuse the part that disables the HVS and PixelValve during boot too, so let's create a separate function. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/5288fb72ed2da643085dce1bc7f6d6f656bf176e.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hvs: Introduce a function to get the assigned FIFOMaxime Ripard
At boot time, if we detect that a pixelvalve has been enabled, we need to be able to retrieve the HVS channel it has been assigned to so that we can disable that channel too. Let's create that function that returns the FIFO or an error from a given output. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/178192d90874559b8386139f2226e773347729fc.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hvs: Make the stop_channel function publicMaxime Ripard
During the transition from the firmware to the KMS driver, we need to pay particular attention to how we deal with the pixelvalves that have already been enabled, otherwise either timeouts or stuck pixels can occur. We'll thus need to call the function to stop an HVS channel at boot. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/a9d5f0891c3bc1deb6b16d56ca6994ed912ec7c7.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Clear the PixelValve FIFO during configurationMaxime Ripard
Even though it's not really clear why we need to flush the PV FIFO during the configuration even though we started by flushing it, experience shows that without it we get a stale pixel stuck in the FIFO between the HVS and the PV. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/ccd6269ba37b2f849ba6e62471c99bd93a4548a0.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Clear the PixelValve FIFO on disableMaxime Ripard
In order to avoid a stale pixel getting stuck on mode change or a disable / enable cycle, we need to make sure to flush the PV FIFO on disable. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/26fe48b09d77088679ed0c8cb8cf0db2f108195e.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Add a delay after disabling the PixelValve outputMaxime Ripard
In order to avoid pixels getting stuck in the (unflushable) FIFO between the HVS and the PV, we need to add some delay after disabling the PV output and before disabling the HDMI controller. 20ms seems to be good enough so let's use that. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/15cf215bd2ceebd203c4010c09c21a4019c650ed.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: encoder: Add finer-grained encoder callbacksMaxime Ripard
In the BCM2711, the setup of the HVS, pixelvalve and HDMI controller requires very precise ordering and timing that the regular atomic callbacks don't provide. Let's add new callbacks on top of the regular ones to be able to split the configuration as needed. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/1dd78efe8f29add73c97d0148cfd4ec8e34aaf22.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Move HVS channel init before the PV initialisationMaxime Ripard
In order to avoid stale pixels getting stuck in an intermediate FIFO between the HVS and the pixelvalve on BCM2711, we need to configure the HVS channel before the pixelvalve is reset and configured. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/9d7c5a03bc1a1e6d50f7b617cc2d8a46a4bbb7bc.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Remove redundant pixelvalve resetMaxime Ripard
Since we moved the pixelvalve configuration to atomic_enable, we're now first calling the function that resets the pixelvalve and then the one that configures it. However, the first thing the latter is doing is calling the reset function, meaning that we reset twice our pixelvalve. Let's remove the first call. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/a0a31af0d4a7a070de979f0e5b618d9e2c730e7f.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Remove mode_set_nofbMaxime Ripard
On BCM2711 to avoid stale pixels getting stuck in intermediate FIFOs, the pixelvalve needs to be setup each time there's a mode change or enable / disable sequence. Therefore, we can't really use mode_set_nofb anymore to configure it, but we need to move it to atomic_enable. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/f86c7a6946f98262f1cf59a461596a796d4bcc5f.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hvs: Make sure our channel is resetMaxime Ripard
In order to clear our intermediate FIFOs that might end up with a stale pixel, let's make sure our FIFO channel is reset every time our channel is setup. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/b34c562b36177c758dd2e9d84bceb07689bfbe05.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Move the HVS gamma LUT setup to our init functionMaxime Ripard
Since most of the HVS channel is setup in the init function, let's move the gamma setup there too. As this makes the HVS mode_set function empty, let's remove it in the process. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/d439da8f1592a450a6ad35ab1f9e77def17c7965.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Move HVS init and close to a functionMaxime Ripard
In order to make further refactoring easier, let's move the HVS channel setup / teardown to their own function. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/fb1b5299d1636ddce8340b51a80d51641839f83b.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Move PV dump to config_pvMaxime Ripard
Now that we only configure the PixelValve in vc4_crtc_config_pv, it doesn't really make much sense to dump its register content in its caller. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/c195af7d9e140a2a6db32992ee7e54071c6f94ba.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Turn pixelvalve reset into a functionMaxime Ripard
The driver resets the pixelvalve FIFO in a number of occurences without always using the same sequence. Since this will be critical for BCM2711, let's move that sequence to a function so that we are consistent. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/fb31003a9eee02c4b949556299ff41f0a113499a.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Disable color management for HVS5Maxime Ripard
The HVS5 uses different color matrices. Disable color management support for now. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/e528e2edf0a1be3930196d437e548114dd9fcf59.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Add HDMI1 encoder typeMaxime Ripard
The BCM2711 sports a second HDMI controller, so let's add that second HDMI encoder type. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/6ba56d2421a4ad59ce72178e8f37eacfbd72cb33.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Rename HDMI encoder type to HDMI0Maxime Ripard
The previous generations were only supporting a single HDMI controller, but that's about to change, so put an index as well to differentiate between the two controllers. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/84e11e4793aaa30d6e5c56e305d22404ac5a932d.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Add function to compute FIFO level bitsMaxime Ripard
The longer FIFOs in vc5 pixelvalves means that the FIFO full level doesn't fit in the original register field and that we also have a secondary field. In order to prepare for this, let's move the registers fill part to a helper function. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/e46a3823128af50c1c833de8fa9b95e9b86c2f66.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Add FIFO depth to vc4_crtc_dataMaxime Ripard
Not all pixelvalve FIFOs in vc5 have the same depth, so we need to add that to our vc4_crtc_data structure to be able to compute the fill level properly later on. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/7df3549c1bea9b0a27c784dc416bb9a831e4e18f.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Assign output to channel automaticallyMaxime Ripard
The HVS found in the BCM2711 has 6 outputs and 3 FIFOs, with each output being connected to a pixelvalve, and some muxing between the FIFOs and outputs. Any output cannot feed from any FIFO though, and they all have a bunch of constraints. In order to support this, let's store the possible FIFOs each output can be assigned to in the vc4_crtc_data, and use that information at atomic_check time to iterate over all the CRTCs enabled and assign them FIFOs. The channel assigned is then set in the vc4_crtc_state so that the rest of the driver can use it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/f9aba3814ef37156ff36f310118cdd3954dd3dc5.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: kms: Convert to for_each_new_crtc_stateMaxime Ripard
The vc4 atomic commit loop has an handrolled loop that is basically identical to for_each_new_crtc_state, let's convert it to that helper. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/a712d2b70aaee20379cfc52c2141aa2f6e2a9d5b.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Enable and disable the PV in atomic_enable / disableMaxime Ripard
The VIDEN bit in the pixelvalve currently being used to enable or disable the pixelvalve seems to not be enough in some situations, which whill end up with the pixelvalve stalling. In such a case, even re-enabling VIDEN doesn't bring it back and we need to clear the FIFO. This can only be done if the pixelvalve is disabled though. In order to overcome this, we can configure the pixelvalve during mode_set_no_fb by calling vc4_crtc_config_pv, but only enable it in atomic_enable and flush the FIFO there, and in atomic_disable disable the pixelvalve again. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/e97596f62f4df83424d994a23465463ac60f986e.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Use local chan variableMaxime Ripard
The vc4_crtc_handle_page_flip already has a local variable holding the value of vc4_crtc->channel, so let's use it instead. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/439c589baec72ddb89159857a2d078fdd77b02a2.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Rename HVS channel to outputMaxime Ripard
In vc5, the HVS has 6 outputs and 3 FIFOs (or channels), with pixelvalves each being assigned to a given output, but each output can then be muxed to feed from multiple FIFOs. Since vc4 had that entirely static, both were probably equivalent, but since that changes, let's rename hvs_channel to hvs_output in the vc4_crtc_data, since a pixelvalve is really connected to an output, and not to a FIFO. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/b7618bb17b1c435c5d6ce50bcde2fe9243281d02.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Move the cob allocation outside of bindMaxime Ripard
The COB allocation depends on the HVS channel used for a given pixelvalve. While the channel allocation was entirely static in vc4, vc5 changes that and at bind time, a pixelvalve can be assigned to multiple HVS channels. Let's prepare that rework by allocating the COB when it's actually needed. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/484cbd4b00cfeee425295df438222258cc39a3dd.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Use a shared interruptMaxime Ripard
Some pixelvalves in vc5 use the same interrupt line so let's register our interrupt handler as a shared one. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/5a915d374357f41083ac71779fa9b2c35a339c2f.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: crtc: Deal with different number of pixel per clockMaxime Ripard
Some of the HDMI pixelvalves in vc5 output two pixels per clock cycle. Let's put the number of pixel output per clock cycle in the CRTC data and update the various calculations to reflect that. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/18a3bb079981ba820132b37e736a4bb371234d2e.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: plane: Create more planesMaxime Ripard
Let's now create more planes that can be affected to all the CRTCs. vc4 has 3 CRTCs, 1 primary and 1 cursor each, and was having 24 (8 planes per CRTC) overlays. However, vc5 has 5 CRTCs, so keeping the same logic would put us at 50 planes which is well above the 32 planes limit imposed by DRM. Using 16 seems like a good tradeoff between staying under 32 and yet providing enough planes. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/b41003001541fc2bb23668c699c0369ff7983be8.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: plane: Optimize the LBM allocation sizeDave Stevenson
The current code is using the maximum of the source line size and the destination line size to compute the size of the LBM to allocate. While this is simpler, it starts to be an issue with modes such as 4k with a quite long that will consume all the available memory, so we no longer have that luxury. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/b9e091883a4f7395c5b6a4f7c6070225934293db.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: plane: Change LBM alignment constraint on LBMDave Stevenson
The HVS5 needs an alignment of 64bytes for its LBM memory, so let's reflect it. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/6f9c4fe1eb9258a3f1d0f21af6a99c42472ac531.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hvs: Boost the core clock during modesetMaxime Ripard
In order to prevent timeouts and stalls in the pipeline, the core clock needs to be maxed at 500MHz during a modeset on the BCM2711. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/37ed9e0124c5cce005ddc8dafe821d8b0da036ff.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: Add support for the BCM2711 HVS5Dave Stevenson
The HVS found in the BCM2711 is slightly different from the previous generations. Most notably, the display list layout changes a bit, the LBM doesn't have the same size and the formats ordering for some formats is swapped. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1d02fab3b916d639c2dc05608c117bbd8230ebe8.1599120059.git-series.maxime@cerno.tech
2020-09-07Merge tag 'v5.9-rc4' into patchworkMauro Carvalho Chehab
Linux 5.9-rc4 * tag 'v5.9-rc4': (1001 commits) Linux 5.9-rc4 io_uring: fix linked deferred ->files cancellation io_uring: fix cancel of deferred reqs with ->files include/linux/log2.h: add missing () around n in roundup_pow_of_two() mm/khugepaged.c: fix khugepaged's request size in collapse_file mm/hugetlb: fix a race between hugetlb sysctl handlers mm/hugetlb: try preferred node first when alloc gigantic page from cma mm/migrate: preserve soft dirty in remove_migration_pte() mm/migrate: remove unnecessary is_zone_device_page() check mm/rmap: fixup copying of soft dirty and uffd ptes mm/migrate: fixup setting UFFD_WP flag mm: madvise: fix vma user-after-free checkpatch: fix the usage of capture group ( ... ) fork: adjust sysctl_max_threads definition to match prototype ipc: adjust proc_ipc_sem_dointvec definition to match prototype mm: track page table modifications in __apply_to_page_range() MAINTAINERS: IA64: mark Status as Odd Fixes only MAINTAINERS: add LLVM maintainers MAINTAINERS: update Cavium/Marvell entries mm: slub: fix conversion of freelist_corrupted() ...
2020-09-07drm/i915: Unlock the shared hwsp_gtt object after pinningThomas Hellström
The hwsp_gtt object is used for sub-allocation and could therefore be shared by many contexts causing unnecessary contention during concurrent context pinning. However since we're currently locking it only for pinning, it remains resident until we unpin it, and therefore it's safe to drop the lock early, allowing for concurrent thread access. Signed-off-by: Thomas Hellström <thomas.hellstrom@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Filter wake_flags passed to default_wake_functionChris Wilson
(NOTE: This is the minimal backportable fix, a full fix is being developed at https://patchwork.freedesktop.org/patch/388048/) The flags passed to the wait_entry.func are passed onwards to try_to_wake_up(), which has a very particular interpretation for its wake_flags. In particular, beyond the published WF_SYNC, it has a few internal flags as well. Since we passed the fence->error down the chain via the flags argument, these ended up in the default_wake_function confusing the kernel/sched. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110 Fixes: ef4688497512 ("drm/i915: Propagate fence errors") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Joonas: Rebased and reordered into drm-intel-gt-next branch] [Joonas: Added a note and link about more complete fix] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Remove i915_request.lock requirement for execution callbacksChris Wilson
To implement preempt-to-busy (and so efficient timeslicing and best utilization of the hardware submission ports) we let the GPU run asynchronously in respect to the ELSP submission queue. This created challenges in keeping and accessing the driver state mirroring the asynchronous GPU execution. Previous fix 1d9221e9d395 ("drm/i915: Skip signaling a signaled request") however did not correctly serialize request retirement with the execution callbacks. We were using the i915_request.lock to serialise adding an execution callback with __i915_request_submit. However, if we use an atomic llist_add to serialise multiple waiters and then check to see if the request is already executing, we can remove the irq-spinlock and fix serialization between retirement and execution callbacks in one go. v2: Avoid using the irq_work when outside of the irq-spinlocks, where we can execute the callbacks immediately. v3: Pay close attention to the order of setting ACTIVE on retirement, we need to ensure the request is signaled and breadcrumbs detached before we finish removing the request from the engine. v4: Expanded commit message. Fixes: 1d9221e9d395 ("drm/i915: Skip signaling a signaled request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-2-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Joonas: Rebased and reordered into drm-intel-gt-next branch] [Joonas: Added expanded commit message from Tvrtko and Chris] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Be wary of data races when reading the active execlistsChris Wilson
To implement preempt-to-busy (and so efficient timeslicing and best utilization of the hardware submission ports) we let the GPU run asynchronously in respect to the ELSP submission queue. This created challenges in keeping and accessing the driver state mirroring the asynchronous GPU execution. The latest occurence of this was spotted by KCSAN: [ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915] [ 1413.563221] [ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1: [ 1413.563548] __await_execution+0x217/0x370 [i915] [ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915] [ 1413.564235] i915_request_await_object+0x421/0x490 [i915] [ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915] [ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915] [ 1413.564998] drm_ioctl_kernel+0x156/0x1b0 [ 1413.565022] drm_ioctl+0x2ff/0x480 [ 1413.565046] __x64_sys_ioctl+0x87/0xd0 [ 1413.565069] do_syscall_64+0x4d/0x80 [ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To complicate matters, we have to both avoid the read tearing of *active and avoid any write tearing as perform the pending[] -> inflight[] promotion of the execlists. This is because we cannot rely on the memcpy doing u64 aligned copies on all kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE annotations to satisfy KCSAN. v2: When in doubt, write the same comment again. v3: Expanded commit message. Fixes: b55230e5e800 ("drm/i915: Check for awaits on still currently executing requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-1-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Joonas: Rebased and reordered into drm-intel-gt-next branch] [Joonas: Added expanded commit message from Tvrtko and Chris] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Add ww locking to pin_to_display_plane, v2.Maarten Lankhorst
Use ww locking for pin_to_display_plane for all the pinning and locking. With the locking removed from set_cache_level, we need to fix i915_gem_set_caching_ioctl to take the object reservation lock. As this is a single lock, we don't need to use the ww dance. Changes since v1: - Do not use ww locking in i915_gem_set_caching_ioctl (Thomas). Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-24-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Add ww locking to vm_fault_gttMaarten Lankhorst
We want to start requiring the reservation_lock instead of obj->mm.lock for pinning objects, take the ww lock inside vm_fault_gtt as a first step towards the legacy lock removal. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-23-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Move i915_vma_lock in the selftests to avoid lock inversion, v3.Maarten Lankhorst
Make sure vma_lock is not used as inner lock when kernel context is used, and add ww handling where appropriate. Ensure that execbuf selftests keep passing by using ww handling. Changes since v2: - Fix i915_gem_context finally. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-22-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Use ww pinning for intel_context_create_request()Maarten Lankhorst
We want to get rid of intel_context_pin(), convert intel_context_create_request() first. :) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-21-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915/selftests: Fix locking inversion in lrc selftest.Maarten Lankhorst
This function does not use intel_context_create_request, so it has to use the same locking order as normal code. This is required to shut up lockdep in selftests. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-20-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Dirty hack to fix selftests locking inversionMaarten Lankhorst
Some i915 selftests still use i915_vma_lock() as inner lock, and intel_context_create_request() intel_timeline->mutex as outer lock. Fortunately for selftests this is not an issue, they should be fixed but we can move ahead and cleanify lockdep now. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-19-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Convert i915_perf to ww locking as wellMaarten Lankhorst
We have the ordering of timeline->mutex vs resv_lock wrong, convert the i915_pin_vma and intel_context_pin as well to future-proof this. We may need to do future changes to do this more transaction-like, and only get down to a single i915_gem_ww_ctx, but for now this should work. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-18-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Kill last user of intel_context_create_request outside of selftestsMaarten Lankhorst
Instead of using intel_context_create_request(), use intel_context_pin() and i915_create_request directly. Now all those calls are gone outside of selftests. :) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-17-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Convert i915_gem_object/client_blt.c to use ww locking as well, v2.Maarten Lankhorst
This is the last part outside of selftests that still don't use the correct lock ordering of timeline->mutex vs resv_lock. With gem fixed, there are a few places that still get locking wrong: - gvt/scheduler.c - i915_perf.c - Most if not all selftests. Changes since v1: - Add intel_engine_pm_get/put() calls to fix use-after-free when using intel_engine_get_pool(). Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-16-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Make sure execbuffer always passes ww state to i915_vma_pin.Maarten Lankhorst
As a preparation step for full object locking and wait/wound handling during pin and object mapping, ensure that we always pass the ww context in i915_gem_execbuffer.c to i915_vma_pin, use lockdep to ensure this happens. This also requires changing the order of eb_parse slightly, to ensure we pass ww at a point where we could still handle -EDEADLK safely. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-15-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Rework intel_context pinning to do everything outside of pin_mutexMaarten Lankhorst
Instead of doing everything inside of pin_mutex, we move all pinning outside. Because i915_active has its own reference counting and pinning is also having the same issues vs mutexes, we make sure everything is pinned first, so the pinning in i915_active only needs to bump refcounts. This allows us to take pin refcounts correctly all the time. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-14-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-09-07drm/i915: Pin engine before pinning all objects, v5.Maarten Lankhorst
We want to lock all gem objects, including the engine context objects, rework the throttling to ensure that we can do this. Now we only throttle once, but can take eb_pin_engine while acquiring objects. This means we will have to drop the lock to wait. If we don't have to throttle we can still take the fastpath, if not we will take the slowpath and wait for the throttle request while unlocked. The engine has to be pinned as first step, otherwise gpu relocations won't work. Changes since v1: - Only need to get a throttled request in the fastpath, no need for a global flag any more. - Always free the waited request correctly. Changes since v2: - Use intel_engine_pm_get()/put() to keeep engine pool alive during EDEADLK handling. Changes since v3: - Fix small rq leak. Changes since v4: - Use a single reloc_context, for intel_context_pin_ww(). Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200819140904.1708856-13-maarten.lankhorst@linux.intel.com Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 05:52:41 +0000