summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2016-03-14drm/vmwgfx: Fix screen object page flips for large framebuffersThomas Hellstrom
For page flips the framebuffer may be much larger than the crtc scanout area and may be attached to multiple crtcs. When flipping a crtc, make sure we dirty only that crtc's area of the framebuffer. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Fix a screen object framebuffer dirty corner caseThomas Hellstrom
If there are no cliprects for a particular crtc, an invalid command would have been generated. If that's the case, instead ditch the generated command sequence. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Add DXGenMips supportCharmaine Lee
Add support for DXGenMips command. Signed-off-by: Charmaine Lee <charmainel@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2016-03-14drm/i915: Handle -EDEADLK in drm_atomic_commit from load-detect.Maarten Lankhorst
CI runs with DEBUG_WW_MUTEX_SLOWPATH, so -EDEADLK occurs a lot more. Handle the case where drm_atomic_commit fails with -EDEADLK correctly. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/56D3FEF1.6070306@linux.intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 3ba86073edcbe2be53d9862d5a3098f0ebf8ae9a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-03-14drm/i915: Update DRIVER_DATE to 20160314Daniel Vetter
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-03-13drm/vc4: Recognize a more specific compatible string for V3D.Eric Anholt
The Raspberry Pi Foundation's firmware updates are shipping device trees using the old string, so we'll keep recognizing that as this rev of V3D. Still, we should use a more specific name in the upstream DT to clarify which board is being supported, in case we do other revs of V3D in the future. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-14drm/nouveau/clk/gm20b: add basic driverAlexandre Courbot
Add a basic clock driver that reuses the GK20A logic. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: share reusable structures/functionsAlexandre Courbot
Make functions/structures that the GM20B driver will reuse public. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: set lowest frequency during init()Alexandre Courbot
Err on the safe side by setting the lowest frequency (and thus voltage) during device init. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: split gk20a_clk_new()Alexandre Courbot
This allows to instanciate drivers that use the same logic as gk20a with different parameters. Add a constructor function to allow other chips that inherit from this clock to easily initialize its members Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: abstract pl_to_divAlexandre Courbot
pl_to_div may be done differently depending on the chip. Abstract this operation so the same logic can be reused for them as well. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: put mnp values into their own structAlexandre Courbot
This allows us to read them using one single function and will be handy to the GM20B driver. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: emit parent rate as debug messageAlexandre Courbot
Most users are probably not interested in this information. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: only restore divider to 1:1 if neededAlexandre Courbot
Only restore the 1:1 divider if it is not set already. Also use the proper masks for this operation and add a second write as done in the Android code. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: only compute n_lo if neededAlexandre Courbot
n_lo is used if we are going to slide. Compute it only if that condition succeeds to avoid confusion about future usage of this computation. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: fix VCO bit maskAlexandre Courbot
Fix the mask specified to switch to VCO mode was given as an (incorrect) immediate value. Although the side-effect happens to be the same, this is clearly incorrect. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: rename enable/disable functionsAlexandre Courbot
gk20a_pllg_disable() is only used in the context of gk20a_clk_fini(). Move its body there and rename _gk20a_pllg_enable() and _gk20a_pllg_disable() to non-underscored versions. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: reorganize variables in gk20a_pllg_calc_mnp()Alexandre Courbot
Move some variables declarations to the scope where they are actually used to make the code easier to follow. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/clk/gk20a: convert parameters to KhzAlexandre Courbot
Perform computations in Khz instead of Mhz for better precision. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/volt: add GM20B driverAlexandre Courbot
Add basic GM20B volt driver that reuses the GK20A logic. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/volt/gk20a: split constructorAlexandre Courbot
Split the constructor function so we can reuse the same logic in other chips. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/volt/gk20a: share reusable members & functionsVince Hsu
The CVB calculation and voltage setting functions can be reused for the future chips. So move the declaration to gk20a.h. Signed-off-by: Vince Hsu <vinceh@nvidia.com> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/ce/gm107: expose MaxwellDmaCopyABen Skeggs
The HW accepts KeplerDmaCopyA and MaxwellDmaCopyA classes. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gm107: KeplerChannelGpfifoB, and 2048 channelsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk110: expose KeplerChannelGpfifoBBen Skeggs
This class supports a WFI method (0x0078) that's not present on the KeplerChannelGpfifoA class. The binary driver exposes both classes on these GPUs for some reason, though there doesn't appear to be any difference in the setup that's done for each (ie. even if you allocate GpfifoA, the WFI method will still work). We shall just expose GpfifoB, as I don't see a good reason to report the presence of both. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: submit NOP after all PBDMA_INTR_0, not just DEVICEBen Skeggs
Prevents the same interrupt from re-triggering forever. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: add vic plumbingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: add sec plumbingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: add nvdec plumbingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: add nvenc plumbingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: add msenc plumbingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/core: add vic plumbingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/core: add nvdec plumbingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/core: add nvenc plumbingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/core: add msenc plumbingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/core: sort engine indices alphabeticallyBen Skeggs
Unlike subdevs, these aren't initialised in a defined order. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: make use of topology info during gpfifo constructionBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: make use of topology info during fault recoveryBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: make use of topology info when handling ctxsw timeoutBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: read device topology information from hwBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: cosmetic engine->runlist changesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: don't attempt recovery of unknown mmu enginesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: identify fault-recovery members more clearlyBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gk104: rename spoon to pbdma, and move detection to oneinitBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gf100: fix certain engines not being recovered after a faultBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gf100: don't attempt recovery of unknown mmu enginesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gf100: identify fault-recovery members more clearlyBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/fifo/gf100: rename spooon to pbdma, and move detection to oneinitBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/gr/fuc: Store $r0 in interrupt handlerRoy Spliet
It's supposed to always be 0, but at least nv_iowr() temporarily violates this. Since the ih touches $r0, it should be stored. Signed-off-by: Roy Spliet <rs855@cam.ac.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14drm/nouveau/pmu/fuc: use imm32 in ld/st macrosKarol Herbst
Signed-off-by: Karol Herbst <nouveau@karolherbst.de> Reviewed-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-22 11:54:38 +0000