| Age | Commit message (Collapse) | Author |
|---|
|
The same Samsung MIPI DSIM master can also be used in NXP's
i.MX8M Mini/Nano/Plus SoC.
In i.MX8M Mini/Nano/Plus SoC the DSI Phy requires a MIPI DPHY
bit to reset in order to activate the PHY and that can be done
via upstream i.MX8M blk-ctrl driver.
So, mark the phy get as optional.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
In general, for MIPI DSI there are three ways to represent the
pipeline for an upstream bridge to find the connected downstream
panel or bridge.
1. Child panel or bridge as a conventional device tree child node.
2. Child panel or bridge as an OF-graph port node.
3. Child panel or bridge as an OF-graph ports node.
There are three different downstream panels or bridges that are
possible to connect an upstream DSI host bridge - DSI Panel,
DSI Bridge, and I2C-Configured DSI bridge.
An example of the downstream panel represented as a child node,
&dsi {
compatible = "samsung,exynos5433-mipi-dsi";
ports {
port@0 {
reg = <0>;
dsi_to_mic: endpoint {
remote-endpoint = <&mic_to_dsi>;
};
};
};
panel@0 {
reg = <0>;
};
};
An example of the downstream bridge represented as a port node,
&i2c4 {
bridge@2c {
compatible = "ti,sn65dsi84";
ports {
port@0 {
reg = <0>;
bridge_in_dsi: endpoint {
remote-endpoint = <&dsi_out_bridge>;
data-lanes = <1 2>;
};
};
port@2 {
reg = <2>;
bridge_out_panel: endpoint {
remote-endpoint = <&panel_out_bridge>;
};
};
};
};
};
&dsi {
compatible = "fsl,imx8mm-mipi-dsim";
port {
dsi_in_lcdif: endpoint@0 {
reg = <0>;
remote-endpoint = <&lcdif_out_dsi>;
};
dsi_out_bridge: endpoint@1 {
reg = <1>;
remote-endpoint = <&bridge_in_dsi>;
};
};
};
An example of the downstream bridge represented as a ports node,
&dsi {
compatible = "fsl,imx8mm-mipi-dsim";
ports {
port@0 {
reg = <0>;
dsi_in_lcdif: endpoint@0 {
reg = <0>;
remote-endpoint = <&lcdif_out_dsi>;
};
};
port@1 {
reg = <1>;
dsi_out_bridge: endpoint {
remote-endpoint = <&bridge_in_dsi>;
};
};
};
In, summary it is possible to represent all three downstream slaves
devices using OF-graph port or ports node however only DSI Panel and
DSI Bridge are possible but not possible to represent I2C-Configured
DSI bridge child nodes since I2C-Configure bridges are child of I2C
node, not upstream DSI host bridge and it is must represent them
endpoint port linking.
This indeed means, the OF-graph port or ports representation is
mandatory for I2C-Configured DSI bridges.
This patch tries to add an OF-graph port or ports representation
detection code on top of existing child node detection.
It is possible to replace the entire detection code using existing
drm_of helper drm_of_find_panel_or_bridge but it will break the
Exynos DSI since the pipeline doesn't support OF-graph port or ports
node.
Overall, this patch has a combination of child and OF-graph pipeline
detections in order to support the backward compatibility of Exynos
DSI child node and i.MX8M Mini/Nano/Plus OF-graph port or ports
node pipelines.
This is the first common DSI host bridge driver that needs to support
all possible downstream connection pipeline combinations.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Exynos DSI already converted into a bridge driver, so bridge
detach will suppose happened during bridge chain removal done
by the bridge core.
Drop the explicit call chain to detach the bridge.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This panel is found in Lenovo Flex 5G laptop, so add the entry for it
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230324165909.131831-1-vkoul@kernel.org
|
|
Don't dereference "db->dsi_dev" when it is an error pointer.
Fixes: 249a4f5e663c ("drm/panel: Add Magnachip D53E6EA8966 Panel Driver")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/de0273a8-8910-4ac4-b4ed-f7691c4d2ca6@kili.mountain
|
|
Compiling AMD GPU drivers displays two warnings:
drivers/gpu/drm/scheduler/sched_main.c:738: warning: Function parameter or member 'file' not described in 'drm_sched_job_add_syncobj_dependency'
drivers/gpu/drm/scheduler/sched_main.c:738: warning: Excess function
parameter 'file_private' description in
'drm_sched_job_add_syncobj_dependency'
Get rid of them by renaming the variable name on the function description
Signed-off-by: Caio Novais <caionovais@usp.br>
Link: https://lore.kernel.org/r/20230325131532.6356-1-caionovais@usp.br
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
|
|
There are 2 banks on it6505, and when writing to different bank,
REG_BANK_SEL needs to be set to the targeted bank. The current code set
this additionally, which causes a race condition when a process is
writing bank 0 registers while another process set the bank to 1. Set
ranges in regmap config so the regmap API would handle the bank changes.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327044804.3657551-1-hsinyi@chromium.org
|
|
The drmm_encoder_alloc() function returns error pointers. It never
returns NULL. Fix the check accordingly.
Fixes: 7a1adbd23990 ("drm: rcar-du: Use drmm_encoder_alloc() to manage encoder")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The DORCR register controls the routing of clocks and data between DU
channels within a group. For groups that contain a single channel,
there's no routing option to control, and some fields of the register
are then reserved. On Gen2 those reserved fields are documented as
required to be set to 0, while on Gen3 and newer the PG1T, DK1S and PG1D
reserved fields must be set to 1.
The DU driver initializes the DORCR register in rcar_du_group_setup(),
where it ignores the PG1T, DK1S and PG1D, and then configures those
fields to the correct value in rcar_du_group_set_routing(). This hasn't
been shown to cause any issue, but prevents certifying that the driver
complies with the documentation in safety-critical use cases.
As there is no reasonable change that the documentation will be updated
to clarify that those reserved fields can be written to 0 temporarily
before starting the hardware, make sure that the registers are always
set to valid values.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The DORCR fields were documented in the R-Car H1 datasheet with 1-based
named, and then got renamed to 0-based in Gen2. The 0-based names are
used for Gen3 and Gen4, making H1 an outlier. Rename the field macros to
make them 0-based, in order to increase readability of the code when
comparing it with the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
When the input to a DU channel comes from a VSP, the DU doesn't perform
any blending operation. Select XRGB8888 instead of ARGB8888 to ensure
that the corresponding registers don't get written with invalid values.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The ESCR and OTAR registers are not present in all DU channels on Gen3
SoCs. ESCR only exists in channels that can be routed to an LVDS or
DPAD, and OTAR in channels that can be routed to a DPAD. Skip writing
those registers for other channels. This replaces the DU gen check, as
Gen4 doesn't have LVDS or DPAD outputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
On R-Car D3 and E3, the LVDS encoder provides the dot (pixel) clock to
the DU, regardless of whether the LVDS output is used or not. When using
the DPAD (RGB) output, the DU driver thus enables and disables the LVDS
PLL manually, while when using the LVDS output, it lets the LVDS bridge
driver handle the PLL configuration internally as part of the atomic
enable and disable operations.
This causes an issue when using the LVDS output. As bridges are disabled
before CRTCs, the current implementation violates the enable/disable
sequences documented in the hardware datasheet, which requires the dot
clock to be enabled before the CRTC is started and disabled after it
gets stopped.
Fix the problem by enabling/disabling the LVDS PLL manually from the DU
regardless of which output is used, and skipping the PLL handling in the
LVDS bridge atomic enable and disable operations.
This is however not enough. Disabling the LVDS encoder while leaving the
PLL on still results in a vertical blanking wait timeout when disabling
the DU. Investigation showed that the culprit is the LVEN bit. For an
unclear reason, clearing the bit when disabling the LVDS encoder blocks
vertical blanking interrupts. We thus have to delay disabling the whole
LVDS encoder, not just disabling the PLL, until the DU is disabled.
We could split the LVDS disable sequence by clearing the LVRES bit in
the LVDS bridge atomic disable handler, and delaying the rest of the
operations, in order to disable the LVDS output at bridge atomic disable
time, before stopping the CRTC. This would make the code more complex,
without a clear benefit, so keep the implementation simple(r).
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
|
|
To prepare for a rework of the LVDS disable code, which will need to be
called from rcar_lvds_pclk_disable(), move the LVDS enable code,
currently stored in the __rcar_lvds_atomic_enable() function, to a
separate code section separate from bridge operations. It will be then
extended with the LVDS disable code.
As part of this rework the __rcar_lvds_atomic_enable() function is
renamed to rcar_lvds_enable() to more clearly indicate its purpose.
No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
|
|
When disabling the companion bridge in rcar_lvds_atomic_disable(),
there's no need to go through the bridge's operations to call
.atomic_disable(). Call rcar_lvds_atomic_disable() on the companion
directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Core Changes:
- drm: Add SDP Error Detection Configuration Register (Arun)
Driver Changes:
- Meteor Lake enabling and fixes (RK, Jose, Madhumitha)
- Lock the fbdev obj before vma pin (Tejas)
- DSC fixes (Stanislav)
- Fixes and clean-up on opregion code (Imre)
- More wm/vblank stuff (Ville)
- More general display code organization (Jani)
- DP Fixes (Stanislav, Ville)
- Introduce flags to ignore long HPD and link training issues \
for handling spurious issues on CI (Vinod)
- Plane cleanups and extra registers (Ville)
- Update audio keepalive clock values (Clint)
- Rename find_section to bdb_find_section (Maarten)
- DP SDP CRC16 for 128b132b link layer (Arun)
- Fix various issues with noarm register writes (Ville)
- Fix a few TypeC / MST issues (Imre)
- Create GSC submission targeting HDCP and PXP usages on MTL+ (Suraj)
- Enable HDCP2.x via GSC CS (Suraj)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZBy56qc9C00tCLOY@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Core Changes:
- Add unit test for xrgb8888 to mono.
- Assorted small fixes to format helper selftests.
- Assorted documentation updates.
- Drop drm_dev_set_unique.
- Always use shadow buffer in generic fbdev emulation helpers, and
improve error handling.
Driver Changes:
- Assorted small fixes to malidp, hdlcd, gma500, lima, bridge, rockchip.
- Move fbdev in gma500 to use drm_client.
- Convert bridge platform callbacks to void return.
- Drop leftover from vgem to shmem helper conversion.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5a4c438e-7047-c044-fc77-5a3597000264@linux.intel.com
|
|
drm_edid_read returns NULL on error, so feeding it directly into
drm_edid_duplicate may lead to NULL pointer dereference. Add a check to
guard this.
Fixes: 6a17b4d1b52f ("drm/bridge: ps8640: Add a cache for EDID")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230324035909.1727356-1-treapking@chromium.org
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.3-2023-03-23:
amdgpu:
- S4 fix
- Soft reset fixes
- SR-IOV fix
- Remove an out of date comment in the DC code
- ASPM fix
- DCN 3.2 fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323161939.7751-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v6.3-rc4:
- Fix an MTL workaround
- Fix fbdev obj locking before vma pin
- Fix state inheritance tracking in initial commit
- Fix missing GuC error capture codes
- Fix missing debug object activation
- Fix uc init late order relative to probe error injection
- Fix perf limit reasons formatting
- Fix vblank timestamp update on seamless M/N changes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/878rfn7njw.fsf@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* fixes for bind and probing error handling for meson, lt8912b bridge
* panel-orientation fixes for Lenovo Book X90F
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323082401.GA8371@linux-uq9g
|
|
When there are multiple EDID reads, the bridge will be repeatedly
enabled and disabled. Add a cache for EDID to speed this up.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230315035508.2874915-2-treapking@chromium.org
|
|
Skip the drm_bridge_chain_pre_enable call when the bridge is already
pre_enabled. This make pre_enable and post_disable (thus
pm_runtime_get/put) symmetric.
Fixes: 46f206304db0 ("drm/bridge: ps8640: Rework power state handling")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230315035508.2874915-1-treapking@chromium.org
|
|
[Why & How]
seamless_odm set was not picked up while
merging commit 2d017189e2b3 ("drm/amd/display:
Blank eDP on enable drv if odm enabled")
Fixes: 2d017189e2b3 ("drm/amd/display: Blank eDP on enable drv if odm enabled")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
When merging commit 9af611f29034
("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming"),
index change was not picked up.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 9af611f29034 ("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
S2idle resume freeze can be observed on Intel ADL + AMD WX5500. This is
caused by commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default").
The root cause is still not clear for now.
So extend and apply the ASPM quirk from commit e02fe3bc7aba
("drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems"), to
workaround the issue on Navi cards too.
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2458
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
The commit c76e483cd916 ("drm/amd/display: Don't restrict bpc to 8 bpc")
removes the historical 8bpc dependency and sets max_bpc to 16.
[How]
The comment that states "8bpc for non-edp" needs to be removed as well.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
sriov needs to enter/exit safe mode in update umd p state
add the cg flag to let it enter or exit while needed
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For engines not supporting soft reset, i.e. VCN, there will be a failed
ib test before mode 1 reset during asic reset. The fences in this case
are never signaled and next time when we try to free the sa_bo, kernel
will hang.
[How]
During pre_asic_reset, driver will clear job fences and afterwards the
fences' refcount will be reduced to 1. For drm_sched_jobs it will be
released in job_free_cb, and for non-sched jobs like ib_test, it's meant
to be released in sa_bo_free but only when the fences are signaled. So
we have to force signal the non_sched bad job's fence during
pre_asic_reset or the clear is not complete.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
when gfx do soft reset, mes will also do reset, if mes is not
resumed when do recover from soft reset, mes is unable to respond
in later sequence
[how]
resume mes when do gfx post soft reset
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For GC IP v11.0.4/11, PSP TMR need to be reserved
for ASIC mode2 reset. But for S4, when psp suspend,
it will destroy the TMR that fails the ASIC reset.
[ 96.006101] amdgpu 0000:62:00.0: amdgpu: MODE2 reset
[ 100.409717] amdgpu 0000:62:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000011 SMN_C2PMSG_82:0x00000002
[ 100.411593] amdgpu 0000:62:00.0: amdgpu: Mode2 reset failed!
[ 100.412470] amdgpu 0000:62:00.0: PM: pci_pm_freeze(): amdgpu_pmops_freeze+0x0/0x50 [amdgpu] returns -62
[ 100.414020] amdgpu 0000:62:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xd0 returns -62
[ 100.415311] amdgpu 0000:62:00.0: PM: pci_pm_freeze+0x0/0xd0 returned -62 after 4623202 usecs
[ 100.416608] amdgpu 0000:62:00.0: PM: failed to freeze async: error -62
We can skip the reset on APUs, assuming we can resume them
properly. Verified on some GFX11, GFX10 and old GFX9 APUs.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Move the amdgpu_acpi_should_gpu_reset out of
CONFIG_SUSPEND to share it with hibernate case.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
MediaTek MT8186 has a Mali-G52 MC2 2EE (Bifrost): add a new compatible
and platform data using the same supplies list as "mt8183_b" (only one
regulator), and a new pm_domains list with only two power domains.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316102041.210269-13-angelogioacchino.delregno@collabora.com
|
|
The "mediatek,mt8183-mali" compatible uses platform data that calls for
getting (and managing) two regulators ("mali" and "sram") but devfreq
does not support this usecase, resulting in DVFS not working.
Since a lot of MediaTek SoCs need to set the voltages for the GPU SRAM
regulator in a specific relation to the GPU VCORE regulator, a MediaTek
SoC specific driver was introduced to automatically satisfy, through
coupling, these constraints: this means that there is at all no need to
manage both regulators in panfrost but to otherwise just manage the main
"mali" (-> gpu vcore) regulator instead.
Keeping in mind that we cannot break the ABI, the most sensible route
(avoiding hacks and uselessly overcomplicated code) to get a MT8183
node with one power supply was to add a new "mediatek,mt8183b-mali"
compatible, which effectively deprecates the former.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316102041.210269-12-angelogioacchino.delregno@collabora.com
|
|
Required for Mali-G57 on the Mediatek MT8192 and MT8195, which
uses even more power domains than the MT8183 before it.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
[Angelo: Removed unneeded "sram" supply, added mt8195 to commit description]
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316102041.210269-11-angelogioacchino.delregno@collabora.com
|
|
MediaTek MT8192 has a Mali-G57 with a special GPU ID. Add its GPU ID,
but treat it as otherwise identical to a standard Mali-G57.
We do _not_ fix up the GPU ID here -- userspace needs to be aware of the
special GPU ID, in case we find functional differences between
MediaTek's implementation and the standard Mali-G57 down the line.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316102041.210269-10-angelogioacchino.delregno@collabora.com
|
|
Increase the MAX_PM_DOMAINS constant from 3 to 5, to support the
extra power domains required by the Mali-G57 on the MT8192.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316102041.210269-9-angelogioacchino.delregno@collabora.com
|
|
MTL uses GSC command streamer i.e gsc cs to send HDCP/PXP commands
to GSC f/w. It requires to keep hdcp display driver
agnostic to content protection f/w (ME/GSC fw) in the form of
i915_hdcp_fw_ops generic ops.
Adding HDCP GSC CS interface by leveraging the i915_hdcp_fw_ops generic
ops instead of I915_HDCP_COMPONENT as integral part of i915.
Adding checks to see if GSC is loaded and proxy is setup
--v6
-dont change the license date in same patch series [Jani]
-fix the license year {Jani]
--v8
-remove stale comment [Ankit]
-get headers in alphabetical order [Ankit]
-fix hdcp2_supported check [Ankit]
--v9
-remove return statement from hdcp_gsc_fini [Ankit]
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-7-suraj.kandpal@intel.com
|
|
Add function that takes care of sending command to gsc cs. We start
of with allocation of memory for our command intel_hdcp_gsc_message that
contains gsc cs memory header as directed in specs followed by the
actual payload hdcp message that we want to send.
Spec states that we need to poll pending bit of response header around
20 times each try being 50ms apart hence adding that to current
gsc_msg_send function
Also we use the same function to take care of both sending and receiving
hence no separate function to get the response.
--v4
-Create common function to fill in gsc_mtl_header [Alan]
-define host session bitmask [Alan]
--v5
-use i915 directly instead of gt->i915 [Alan]
-No need to make fields NULL as we are already
using kzalloc [Alan]
--v8
-change mechanism to reuse the same memory for one hdcp session[Alan]
-fix header ordering
-add comments to explain flags and host session mask [Alan]
--v9
-remove gem obj from hdcp message as we can use
i915_vma_unpin_and_release [Alan]
-move hdcp message allocation and deallocation from hdcp2_enable and
hdcp2_disable to init and teardown of HDCP [Alan]
--v10
-remove unnecessary i915_vma_unpin [Alan]
--v11
-fix comment style [Uma]
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Pervin Teres <alan.previn.teres.alexis@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-6-suraj.kandpal@intel.com
|
|
There are more than 1 type of content protection security firmware.
Make the name generic
%s/_mei_/_
--v3
-Changing names to drop cp_fw to make naming more agnostic[Jani]
--v4
-remove header reference in intel_display_core.h [Uma]
-fix commit message and prefix drm [Uma]
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-4-suraj.kandpal@intel.com
|
|
pre MTL we interact with mei interface to talk to
firmware and enable CP but going forward we will talk to gsc cs
because of which we are making all names for HDCP helpers and
structures generic as either mei or gsc cs maybe used.
Change the include/drm/i915_mei_hdcp_interface.h to
include/drm/i915_hdcp_interface.h
Change the i915_hdcp_interface.h header naming convention to
suit generic f/w type.
%s/MEI_/HDCP_
%s/mei_dev/hdcp_dev
Change structure name Accordingly.
%s/i915_hdcp_comp_master/i915_hdcp_master
%s/i915_hdcp_component_ops/i915_hdcp_ops
--v6
-make each patch build individually [Jani]
--v8
-change ME FW to ME/GSC FW [Ankit]
-fix formatting issue [Ankit]
--v9
-fix commit message and header [Uma]
--v10
-rename comp variable [Uma]
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-3-suraj.kandpal@intel.com
|
|
HDCP and PXP will require a common function to allow it to
submit commands to the gsc cs. Also adding the gsc mtl header
that needs to be added on to the existing payloads of HDCP
and PXP.
--v4
-Seprate gsc load and heci cmd submission into different
functions in different files for better scalability [Alan]
-Rename gsc address field [Alan]
--v5
-remove extra line is intel_gsc_fw.h [Uma]
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Suraj Kandpal<suraj.kandpal@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316092927.668980-2-suraj.kandpal@intel.com
|
|
devm_regmap_init_mmio() may return an invalid pointer in case of an error.
This patch adds the corresponding IS_ERR check to vop2->map.
Signed-off-by: Alfredo Cruz <alfredo.carlon@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230322224411.15612-1-alfredo.carlon@gmail.com
|
|
This fixes a use-after-free crash during rmmod.
The DRM encoder is embedded inside the larger rockchip_hdmi,
which is allocated with the component. The component memory
gets freed before the main drm device is destroyed. Fix it
by running encoder cleanup before tearing down its container.
Signed-off-by: Toby Chen <tobyc@nvidia.com>
[moved encoder cleanup above clk_disable, similar to bind-error-path]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230317005126.496-1-tobyc@nvidia.com
|
|
clang reportes this error
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:2322:8: error:
variable 'possible_crtcs' is used uninitialized whenever 'if'
condition is false [-Werror,-Wsometimes-uninitialized]
if (vp) {
^~
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:2336:36: note:
uninitialized use occurs here
ret = vop2_plane_init(vop2, win, possible_crtcs);
^~~~~~~~~~~~~~
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:2322:4:
note: remove the 'if' if its condition is always true
if (vp) {
^~~~~~~~
The else-statement changes the win->type to OVERLAY without setting the
possible_crtcs variable. Rework the block, initialize possible_crtcs to
0 to remove the else-statement. Split the else-if-statement out to its
own if-statement so the OVERLAY check will catch when the win-type has
been changed.
Fixes: 368419a2d429 ("drm/rockchip: vop2: initialize possible_crtcs properly")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316132302.531724-1-trix@redhat.com
|
|
The current way to determine during HW state sanitization if a PHY is
connected in the expected way doesn't work in all cases. The check for
this considers only the PHY ready/owned state and the initial TC mode
which was determined earlier by the TC port HW readout - using the
sink's HPD and the same PHY ready/owned states.
For instance for an enabled DP-alt/TBT port without the PHY ready/owned
flags set the initial mode will be TBT, and this will be regarded as a
valid PHY state. However it's possible that the port is actually enabled
in DP-alt mode, but for some reason the PHY ownership was not acquired.
Make sure the driver can detect invalid PHY states as in the above
example by checking the PHY ready/owned state wrt. the PLL type used.
This should be the TBT PLL if the PHY is not owned and the MG (non-TBT)
PLL if the PHY is owned.
v2: Rebased on change passing crtc_state in the previous patch.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230321220101.983366-3-imre.deak@intel.com
|
|
For clarity factor out the function to determine if there are active
links on a TC port. This prepares for the next patch also checking the
port's PLL type.
While at it pass crtc_state to intel_tc_port_sanitize_mode(), and check
hw.active in that, instead of the deprecated crtc->active flag.
v2: Check crtc_state->hw.active instead of crtc->active. (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230321220101.983366-2-imre.deak@intel.com
|
|
Add an encoder hook, which can be called on enabled TC ports to
determine if the port uses a TBT or a non-TBT PLL. An upcoming patch
will use this to sanity check active TC port's PHY state wrt. the PLL
type used by the port.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-13-imre.deak@intel.com
|
|
Since an HDMI output can only be enabled in legacy mode on TC ports,
assume that VBT is wrong and the port is legacy if VBT says the port is
non-legacy and has HDMI. If VBT says to enable DP as well leave the
non-legacy flag enabled, relying on the flag getting fixed up based on
the HPD status during sink detection.
v2: Fix the legacy port flag only if DP is not enabled.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230321220101.983366-1-imre.deak@intel.com
|
|
For consistency detect the initial TC mode in the PHY owned state the
same way this is done in the not owned state (w/o changing the
behavior). While at it, add more details to the PHY state debug print.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-11-imre.deak@intel.com
|
