| Age | Commit message (Collapse) | Author |
|---|
|
The vega10_odn_update_soc_table() function does not allow the SCLK
dependent voltage to be set for power-state 7 to a value below the default
in pptable. Change the for-loop condition to allow undervolting in the
highest state.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205277
Signed-off-by: Pelle van Gils <pelle@vangils.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
dc.c:583:null check is needed after using kzalloc function
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: zhongshiqi <zhong.shiqi@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This patch is for fixing Navi14 HDMI display pink screen issue.
[How]
Call stream->link->link_enc->funcs->setup twice. This is setting
the DIG_MODE to the correct value after having been overridden by
the call to transmitter control.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
i2c_read is called to differentiate passive DP->HDMI and DP->DVI-D dongles
The call is expected to fail in DVI-D case but pass in HDMI case
Some HDMI dongles have a chance to fail as well, causing misdetection as DVI-D
[HOW]
Retry i2c_read to ensure failed result is valid
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
There's a use case for inverted gamma
and it's been confirmed that negative slopes are ok.
[how]
Remove code for blocking non-monotonically increasing gamma
Signed-off-by: Aidan Yang <Aidan.Yang@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Reza Amini <Reza.Amini@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
A display that supports DRR can never really be considered
"synchronized" with any other display because we can dynamically
enable DRR (i.e. without modeset). this will cause their
relative CRTC positions to drift and lose sync. this will disrupt
features such as MCLK switching that assume and depend on
their permanent alignment (that can only change with modeset)
[how]
check for ignore_msa in stream when considered synchronizability
this ignore_msa is basically actually implemented as "supports drr"
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use ERR_PTR to return back the error happened during amdgpu_ib_schedule.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Problem:
When run_job fails and HW fence returned is NULL we still signal
the s_fence to avoid hangs but the user has no way of knowing if
the actual HW job was ran and finished.
Fix:
Allow .run_job implementations to return ERR_PTR in the fence pointer
returned and then set this error for s_fence->finished fence so whoever
wait on this fence can inspect the signaled fence for an error.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update registers: mmCGTT_SPI_CLK_CTRL
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update registers: mmCGTT_SPI_CLK_CTRL
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update registers: mmCGTT_SPI_CLK_CTRL
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
DWB (Display Writeback) flag needs to be enabled as 1, or system
will throw out a few warnings when creating dcn20 resource pool.
Also, Navi14's dwb setting needs to match Navi10's,
which has already been set to 1.
[How]
Change value of num_dwb from 0 to 1.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This seems to help with https://bugs.freedesktop.org/show_bug.cgi?id=111481.
v2: insert a NOP instead of skipping all 0-sized IBs to avoid breaking older hw
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VKexample test hang during Occlusion/SDMA/Varia runs.
Clear XNACK_WATERMK in reg SDMA0_UTCL1_WATERMK to fix this issue.
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The change to skip the PCH reference initialization during fastboot
did end up breaking FDI. To fix that let's try to do the PCH reference
init whenever we're disabling a DPLL that was using said reference
previously.
Cc: stable@vger.kernel.org
Tested-by: Andrija <akijo97@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112084
Fixes: b16c7ed95caf ("drm/i915: Do not touch the PCH SSC reference if a PLL is using it")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022185643.1483-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit dd5279c71405533d4ddbb9453effc60f0f5bf211)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Replace PLLs names used in documentation to that used in the code.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Fixes: 68ff39c3f8c0 ("drm/i915/tgl: Add new pll ids")
Signed-off-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190926123559.15717-1-anna.karas@intel.com
(cherry picked from commit d328bd4f905834c7d87a49962ebc96e397aab7b9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
It seems that killing an application while faults are occurring
(particularly with a GPU in FPGA at a whopping 40MHz) can lead to
handling a lingering page fault after all the address space contexts
have already been freed. In this situation, the LRU list is empty so
addr_to_drm_mm_node() ends up dereferencing the list head as if it were
a struct panfrost_mmu entry; this leaves "mmu->as" actually pointing at
the pfdev->alloc_mask bitmap, which is also empty, and given that the
fault has a high likelihood of being in AS0, hilarity ensues.
Sadly, the cleanest solution seems to involve another goto. Oh well, at
least it's robust...
Fixes: 65e51e30d862 ("drm/panfrost: Prevent race when handling page fault")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9a0b09e6b5851f0d4428b72dd6b8b4c0d0ef4206.1572293305.git.robin.murphy@arm.com
|
|
We get these warnings when build kernel W=1:
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:35:6: warning: no previous prototype for ‘panfrost_perfcnt_clean_cache_done’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:40:6: warning: no previous prototype for ‘panfrost_perfcnt_sample_done’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:190:5: warning: no previous prototype for ‘panfrost_ioctl_perfcnt_enable’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:218:5: warning: no previous prototype for ‘panfrost_ioctl_perfcnt_dump’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:250:6: warning: no previous prototype for ‘panfrost_perfcnt_close’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:264:5: warning: no previous prototype for ‘panfrost_perfcnt_init’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_perfcnt.c:320:6: warning: no previous prototype for ‘panfrost_perfcnt_fini’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_mmu.c:227:6: warning: no previous prototype for ‘panfrost_mmu_flush_range’ [-Wmissing-prototypes]
drivers/gpu/drm/panfrost/panfrost_mmu.c:435:5: warning: no previous prototype for ‘panfrost_mmu_map_fault_addr’ [-Wmissing-prototypes]
For file panfrost_mmu.c, make functions static to fix this.
For file panfrost_perfcnt.c, include header file can fix this.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: stable@vger.kernel.org
[robh: fixup function parameter alignment]
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1571967015-42854-1-git-send-email-wang.yi59@zte.com.cn
|
|
etnaviv_iommuv2_dump_size(..) returns the number of PTE * SZ_4K but
etnaviv_iommuv2_dump(..) increments buf pointer even if there is no PTE.
This results in a bad buf pointer which gets used for memcpy(..), when
copying the MMU state in the coredump buffer.
Fixes: afb7b3b1deb4 ("drm/etnaviv: implement IOMMUv2 translation")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
The switch to per-process address spaces erroneously dropped the check
which validated that the command buffer is mapped through the linear
apperture as required by the hardware. This turned a system
misconfiguration with a helpful error message into a very hard to
debug issue. Reinstate the check at the appropriate location.
Fixes: 17e4660ae3d7 (drm/etnaviv: implement per-process address spaces on MMUv2)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
|
|
The GPU coredump function violates the locking order by holding the MMU
context lock while trying to acquire the etnaviv_gem_object lock. This
results in a possible ABBA deadlock with other codepaths which follow
the established locking order.
Fortunately this is easy to fix by dropping the MMU context lock
earlier, as the BO dumping doesn't need the MMU context to be stable.
The only thing the BO dumping cares about are the BO mappings, which
are stable across the lifetime of the job.
Fixes: 27b67278e007 (drm/etnaviv: rework MMU handling)
[ Not really the first bad commit, but the one where this fix applies
cleanly. Stable kernels need a manual backport. ]
Reported-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.4-2019-10-23:
amdgpu:
- Fix suspend/resume issue related to multi-media engines
- Fix memory leak in user ptr code related to hmm conversion
- Fix possible VM faults when allocating page table memory
- Fix error handling in bo list ioctl
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024031809.3155-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Two fixes for komeda, one for typos and one to prevent an hardware issue
when flushing inactive pipes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023112643.evpp6f23mpjwdsn4@gilmour
|
|
In the impelementation of v3d_submit_cl_ioctl() there are two memory
leaks. One is when allocation for bin fails, and the other is when bin
initialization fails. If kcalloc fails to allocate memory for bin then
render->base should be put. Also, if v3d_job_init() fails to initialize
bin->base then allocated memory for bin should be released.
Fixes: a783a09ee76d ("drm/v3d: Refactor job management.")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021185250.26130-1-navid.emamdoost@gmail.com
|
|
When deferring the probe because of a missing regulator, we were calling
pm_runtime_disable even if pm_runtime_enable wasn't called.
Move the call to pm_runtime_disable to the right place.
Fixes: 635430797d3f ("drm/panfrost: Rework runtime PM initialization")
Reported-by: Chen-Yu Tsai <wens@csie.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023122157.32067-1-tomeu.vizoso@collabora.com
|
|
Fix both the string and the struct member being printed.
Changes since v1:
- Now with a bonus grammar fix, too.
Fixes: 264b9436d23b ("drm/komeda: Enable writeback split support")
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930122231.33029-1-mihail.atanassov@arm.com
|
|
HW doesn't allow flushing inactive pipes and raises an MERR interrupt
if you try to do so. Stop triggering the MERR interrupt in the
middle of a commit by calling drm_atomic_helper_commit_planes
with the ACTIVE_ONLY flag.
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010102950.56253-1-mihail.atanassov@arm.com
|
|
We need to allocate a large enough buffer for the
feedback buffer, otherwise the IB test can overwrite
other memory.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
We need to drop normal and userptr BOs separately.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When we allocate new page tables under memory
pressure we should not evict old ones.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
user_pages array should always be freed after validation regardless if
user pages are changed after bo is created because with HMM change parse
bo always allocate user pages array to get user pages for userptr bo.
v2: remove unused local variable and amend commit
v3: add back get user pages in gem_userptr_ioctl, to detect application
bug where an userptr VMA is not ananymous memory and reject it.
Bugzilla: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1844962
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Joe Barnett <thejoe@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.3
|
|
We need to allocate a large enough buffer for the
session info, otherwise the IB test can overwrite
other memory.
- Session info is 128K according to mesa
- Use the same session info for create and destroy
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204241
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
We need to allocate a large enough buffer for the
session info, otherwise the IB test can overwrite
other memory.
v2: - session info is 128K according to mesa
- use the same session info for create and destroy
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204241
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
We need to allocate a large enough buffer for the
session info, otherwise the IB test can overwrite
other memory.
v2: - session info is 128K according to mesa
- use the same session info for create and destroy
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204241
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
-dma-resv: Change shared_count to post-increment to fix lima crash (Qiang)
-ttm: A couple fixes related to lifetime and restore prefault behavior
(Christian & Thomas)
-panfrost: Fill in missing feature reg values and fix stoppedjob timeouts
(Steven)
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017203419.GA142909@art_vandelay
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.4-2019-10-16:
amdgpu:
- Powerplay fix for SMU7 parts
- Bail earlier when cik/si support is not set to 1
- Fix an SDMA issue on navi
radeon:
- revert a PPC fix which broken x86
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017022443.3853-1-alexander.deucher@amd.com
|
|
As preempt-to-busy leaves the request on the HW as the resubmission is
processed, that request may complete in the background and even cause a
second virtual request to enter queue. This second virtual request
breaks our "single request in the virtual pipeline" assumptions.
Furthermore, as the virtual request may be completed and retired, we
lose the reference the virtual engine assumes is held. Normally, just
removing the request from the scheduler queue removes it from the
engine, but the virtual engine keeps track of its singleton request via
its ve->request. This pointer needs protecting with a reference.
v2: Drop unnecessary motion of rq->engine = owner
Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-1-chris@chris-wilson.co.uk
(cherry picked from commit b647c7df01b75761b4c0b1cb6f4841088c0b1121)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Daniel Vetter uncovered a nasty cycle in using the mmu-notifiers to
invalidate userptr objects which also happen to be pulled into GGTT
mmaps. That is when we unbind the userptr object (on mmu invalidation),
we revoke all CPU mmaps, which may then recurse into mmu invalidation.
We looked for ways of breaking the cycle, but the revocation on
invalidation is required and cannot be avoided. The only solution we
could see was to not allow such GGTT bindings of userptr objects in the
first place. In practice, no one really wants to use a GGTT mmapping of
a CPU pointer...
Just before Daniel's explosive lockdep patches land in v5.4-rc1, we got
a genuine blip from CI:
<4>[ 246.793958] ======================================================
<4>[ 246.793972] WARNING: possible circular locking dependency detected
<4>[ 246.793989] 5.3.0-gbd6c56f50d15-drmtip_372+ #1 Tainted: G U
<4>[ 246.794003] ------------------------------------------------------
<4>[ 246.794017] kswapd0/145 is trying to acquire lock:
<4>[ 246.794030] 000000003f565be6 (&dev->struct_mutex/1){+.+.}, at: userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[ 246.794250]
but task is already holding lock:
<4>[ 246.794263] 000000001799cef9 (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe6/0x2a0
<4>[ 246.794291]
which lock already depends on the new lock.
<4>[ 246.794307]
the existing dependency chain (in reverse order) is:
<4>[ 246.794322]
-> #3 (&anon_vma->rwsem){++++}:
<4>[ 246.794344] down_write+0x33/0x70
<4>[ 246.794357] __vma_adjust+0x3d9/0x7b0
<4>[ 246.794370] __split_vma+0x16a/0x180
<4>[ 246.794385] mprotect_fixup+0x2a5/0x320
<4>[ 246.794399] do_mprotect_pkey+0x208/0x2e0
<4>[ 246.794413] __x64_sys_mprotect+0x16/0x20
<4>[ 246.794429] do_syscall_64+0x55/0x1c0
<4>[ 246.794443] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 246.794456]
-> #2 (&mapping->i_mmap_rwsem){++++}:
<4>[ 246.794478] down_write+0x33/0x70
<4>[ 246.794493] unmap_mapping_pages+0x48/0x130
<4>[ 246.794519] i915_vma_revoke_mmap+0x81/0x1b0 [i915]
<4>[ 246.794519] i915_vma_unbind+0x11d/0x4a0 [i915]
<4>[ 246.794519] i915_vma_destroy+0x31/0x300 [i915]
<4>[ 246.794519] __i915_gem_free_objects+0xb8/0x4b0 [i915]
<4>[ 246.794519] drm_file_free.part.0+0x1e6/0x290
<4>[ 246.794519] drm_release+0xa6/0xe0
<4>[ 246.794519] __fput+0xc2/0x250
<4>[ 246.794519] task_work_run+0x82/0xb0
<4>[ 246.794519] do_exit+0x35b/0xdb0
<4>[ 246.794519] do_group_exit+0x34/0xb0
<4>[ 246.794519] __x64_sys_exit_group+0xf/0x10
<4>[ 246.794519] do_syscall_64+0x55/0x1c0
<4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 246.794519]
-> #1 (&vm->mutex){+.+.}:
<4>[ 246.794519] i915_gem_shrinker_taints_mutex+0x6d/0xe0 [i915]
<4>[ 246.794519] i915_address_space_init+0x9f/0x160 [i915]
<4>[ 246.794519] i915_ggtt_init_hw+0x55/0x170 [i915]
<4>[ 246.794519] i915_driver_probe+0xc9f/0x1620 [i915]
<4>[ 246.794519] i915_pci_probe+0x43/0x1b0 [i915]
<4>[ 246.794519] pci_device_probe+0x9e/0x120
<4>[ 246.794519] really_probe+0xea/0x3d0
<4>[ 246.794519] driver_probe_device+0x10b/0x120
<4>[ 246.794519] device_driver_attach+0x4a/0x50
<4>[ 246.794519] __driver_attach+0x97/0x130
<4>[ 246.794519] bus_for_each_dev+0x74/0xc0
<4>[ 246.794519] bus_add_driver+0x13f/0x210
<4>[ 246.794519] driver_register+0x56/0xe0
<4>[ 246.794519] do_one_initcall+0x58/0x300
<4>[ 246.794519] do_init_module+0x56/0x1f6
<4>[ 246.794519] load_module+0x25bd/0x2a40
<4>[ 246.794519] __se_sys_finit_module+0xd3/0xf0
<4>[ 246.794519] do_syscall_64+0x55/0x1c0
<4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[ 246.794519]
-> #0 (&dev->struct_mutex/1){+.+.}:
<4>[ 246.794519] __lock_acquire+0x15d8/0x1e90
<4>[ 246.794519] lock_acquire+0xa6/0x1c0
<4>[ 246.794519] __mutex_lock+0x9d/0x9b0
<4>[ 246.794519] userptr_mn_invalidate_range_start+0x18f/0x220 [i915]
<4>[ 246.794519] __mmu_notifier_invalidate_range_start+0x85/0x110
<4>[ 246.794519] try_to_unmap_one+0x76b/0x860
<4>[ 246.794519] rmap_walk_anon+0x104/0x280
<4>[ 246.794519] try_to_unmap+0xc0/0xf0
<4>[ 246.794519] shrink_page_list+0x561/0xc10
<4>[ 246.794519] shrink_inactive_list+0x220/0x440
<4>[ 246.794519] shrink_node_memcg+0x36e/0x740
<4>[ 246.794519] shrink_node+0xcb/0x490
<4>[ 246.794519] balance_pgdat+0x241/0x580
<4>[ 246.794519] kswapd+0x16c/0x530
<4>[ 246.794519] kthread+0x119/0x130
<4>[ 246.794519] ret_from_fork+0x24/0x50
<4>[ 246.794519]
other info that might help us debug this:
<4>[ 246.794519] Chain exists of:
&dev->struct_mutex/1 --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem
<4>[ 246.794519] Possible unsafe locking scenario:
<4>[ 246.794519] CPU0 CPU1
<4>[ 246.794519] ---- ----
<4>[ 246.794519] lock(&anon_vma->rwsem);
<4>[ 246.794519] lock(&mapping->i_mmap_rwsem);
<4>[ 246.794519] lock(&anon_vma->rwsem);
<4>[ 246.794519] lock(&dev->struct_mutex/1);
<4>[ 246.794519]
*** DEADLOCK ***
v2: Say no to mmap_ioctl
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111744
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111870
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190928082546.3473-1-chris@chris-wilson.co.uk
(cherry picked from commit a4311745bba9763e3c965643d4531bd5765b0513)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The first come first served apporoach to handling the VBT
child device AUX ch conflicts has backfired. We have machines
in the wild where the VBT specifies both port A eDP and
port E DP (in that order) with port E being the real one.
So let's try to flip the preference around and let the last
child device win once again.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Masami Ichikawa <masami256@gmail.com>
Tested-by: Torsten <freedesktop201910@liggy.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111966
Fixes: 36a0f92020dc ("drm/i915/bios: make child device order the priority order")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011202030.8829-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 41e35ffb380bde1379e4030bb5b2ac824d5139cf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pull setting -EIO on the hung requests into its own utility function.
Having allowed ourselves to short-circuit submission of completed
requests, we can now do the mark_eio() prior to submission and avoid
some redundant operations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-4-chris@chris-wilson.co.uk
(cherry picked from commit 0d7cf7bc15e75bf79f2f65d61d19f896609f816a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Panfrost uses multiple schedulers (one for each slot, so 2 in reality),
and on a timeout has to stop all the schedulers to safely perform a
reset. However more than one scheduler can trigger a timeout at the same
time. This race condition results in jobs being freed while they are
still in use.
When stopping other slots use cancel_delayed_work_sync() to ensure that
any timeout started for that slot has completed. Also use
mutex_trylock() to obtain reset_lock. This means that only one thread
attempts the reset, the other threads will simply complete without doing
anything (the first thread will wait for this in the call to
cancel_delayed_work_sync()).
While we're here and since the function is already dependent on
sched_job not being NULL, let's remove the unnecessary checks.
Fixes: aa20236784ab ("drm/panfrost: Prevent concurrent resets")
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009094456.9704-1-steven.price@arm.com
|
|
Three feature registers were declared but never actually read from the
GPU. Add THREAD_MAX_THREADS, THREAD_MAX_WORKGROUP_SIZE and
THREAD_MAX_BARRIER_SIZE so that the complete set are available.
Fixes: 4bced8bea094 ("drm/panfrost: Export all GPU feature registers")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014151515.13839-1-steven.price@arm.com
|
|
We should not add the BO to the swap LRU when the new mem is fixed and
the TTM object about to be destroyed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Link: https://patchwork.freedesktop.org/patch/335246/
|
|
Commit 4daa4fba3a38 ("gpu: drm: ttm: Adding new return type vm_fault_t")
broke TTM prefaulting. Since vmf_insert_mixed() typically always returns
VM_FAULT_NOPAGE, prefaulting stops after the second PTE.
Restore (almost) the original behaviour. Unfortunately we can no longer
with the new vm_fault_t return type determine whether a prefaulting
PTE insertion hit an already populated PTE, and terminate the insertion
loop. Instead we continue with the pre-determined number of prefaults.
Fixes: 4daa4fba3a38 ("gpu: drm: ttm: Adding new return type vm_fault_t")
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/330387/
|
|
The busy BO might actually be already deleted,
so grab only a list reference.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/332877/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- correct panic handling when running as a Xen guest
- cleanup the Xen grant driver to remove printing a pointer being
always NULL
- remove a soon to be wrong call of of_dma_configure()
* tag 'for-linus-5.4-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Stop abusing DT of_dma_configure API
xen/grant-table: remove unnecessary printing
x86/xen: Return from panic notifier
|
|
sdma will hang once sequence number to be polled reaches 0x1000_0000
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Bail from the pci_driver probe function instead of from the drm_driver
load function.
This avoid /dev/dri/card0 temporarily getting registered and then
unregistered again, sending unwanted add / remove udev events to
userspace.
Specifically this avoids triggering the (userspace) bug fixed by this
plymouth merge-request:
https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59
Note that despite that being a userspace bug, not sending unnecessary
udev events is a good idea in general.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1490490
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This reverts commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6.
This breaks some boards. Maybe just enable this on PPC for
now?
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205147
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
