| Age | Commit message (Collapse) | Author |
|---|
|
Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as DCSS uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.
v2:
* fix commit description (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-6-tzimmermann@suse.de
|
|
Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as amdgpu uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.
v2:
* fix commit description (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-5-tzimmermann@suse.de
|
|
Don't set struct drm_driver.lastclose. It's used to restore the
fbdev console. But as vboxvideo uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See
the call to drm_client_dev_restore() in drm_lastclose().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-4-tzimmermann@suse.de
|
|
Don't set struct drm_driver.lastclose. It's used to restore the
fbdev console. But as mcde uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See
the call to drm_client_dev_restore() in drm_lastclose().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-3-tzimmermann@suse.de
|
|
Don't set struct drm_driver.lastclose. It's used to restore the
fbdev console. But as komeda uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See
the call to drm_client_dev_restore() in drm_lastclose().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-2-tzimmermann@suse.de
|
|
Backmerging drm/drm-next to get the latest changes in the xlnx driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
The engine busyness stats has a worker function to do things like
64bit extend the 32bit hardware counters. The GuC's reset prepare
function flushes out this worker function to ensure no corruption
happens during the reset. Unforunately, the worker function has an
infinite wait for active resets to finish before doing its work. Thus
a deadlock would occur if the worker function had actually started
just as the reset starts.
The function being used to lock the reset-in-progress mutex is called
intel_gt_reset_trylock(). However, as noted it does not follow
standard 'trylock' conventions and exit if already locked. So rename
the current _trylock function to intel_gt_reset_lock_interruptible(),
which is the behaviour it actually provides. In addition, add a new
implementation of _trylock and call that from the busyness stats
worker instead.
v2: Rename existing trylock to interruptible rather than trying to
preserve the existing (confusing) naming scheme (review comments from
Tvrtko).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102192109.2492625-3-John.C.Harrison@Intel.com
|
|
If a context has already been registered prior to first submission
then context init code was not being called. The noticeable effect of
that was the scheduling priority was left at zero (meaning super high
priority) instead of being set to normal. This would occur with
kernel contexts at start of day as they are manually pinned up front
rather than on first submission. So add a call to initialise those
when they are pinned.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102192109.2492625-2-John.C.Harrison@Intel.com
|
|
as invalid
mmu notifier does not always hold mm->sem during call back. That causes
a race condition between kfd userprt buffer mapping and mmu notifier
which leds to gpu shadder or SDMA access userptr buffer before it has been
mapped to gpu VM. Always map userptr buffer to avoid that though it may make
some userprt buffers mapped two times.
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
After moving all FPU code to the DML folder, we can enable DCN support
for the ARM64 platform. Remove the -mgeneral-regs-only CFLAG from the
code in the DML folder that needs to use hardware FPU, and add a control
mechanism for ARM Neon.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ao Zhong <hacc1225@gmail.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- clear kiq ring after suspend/resume under sriov to aviod kiq ring
test failure
- update irq after resume to fix kiq interrput loss
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
temporary workaround to skip ras error for gc_v11_0_3 until IFWI release later
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For some GPUs with more CUs, the original sibling_map[32]
in struct crat_subtype_cache is not enough
to save the cache information when create the VCRAT table,
so skip filling the struct crat_subtype_cache info instead
fill struct kfd_cache_properties directly to fix this problem.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To allow invoking ip specific callbacks
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
.odn_edit_dpm_table = smu_od_edit_dpm_table,
^~~~~~~~~~~~~~~~~~~~~
1 error generated.
There are only two implementations of ->odn_edit_dpm_table() in 'struct
amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One
has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the
other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls
->od_edit_dpm_table() from 'struct pptable_funcs' and
pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct
pp_hwmgr_func', which both have a second parameter type of 'enum
PP_OD_DPM_TABLE_COMMAND'.
Update the type parameter in both the prototype in 'struct amd_pm_funcs'
and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which
cleans up the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c:412:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
.trans_msg = xgpu_ai_mailbox_trans_msg,
^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
drivers/gpu/drm/amd/amdgpu/mxgpu_nv.c:435:15: error: incompatible function pointer types initializing 'void (*)(struct amdgpu_device *, u32, u32, u32, u32)' (aka 'void (*)(struct amdgpu_device *, unsigned int, unsigned int, unsigned int, unsigned int)') with an expression of type 'void (struct amdgpu_device *, enum idh_request, u32, u32, u32)' (aka 'void (struct amdgpu_device *, enum idh_request, unsigned int, unsigned int, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict]
.trans_msg = xgpu_nv_mailbox_trans_msg,
^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
The type of the second parameter in the prototype should be 'enum
idh_request' instead of 'u32'. Update it to clear up the warnings.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
Important to mention is that doing a build before/after this patch
results in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/238
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
It's worth mentioning that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/239
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So the callbacks are set early in case we need them.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So the callbacks are set early in case we need them.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So the callbacks are set before we use them.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove unnecessary register program in SRIOV
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Start from soc21, CP does not support MCBP, so disable it.
[how]
Used amgpu_mcbp flag alone instead of checking if is in SRIOV to
enable/disable MCBP.
Only set flag to enable on asic_type prior to soc21 in SRIOV.
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use virt_init_setting instead of per ip version setting.
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Hang on MES timeout if halt_if_hws_hang is set to 1.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With corresponding FW change fixes issue where triggering CWSR on a
workgroup with waves in s_barrier wouldn't lead to a back-off and
therefore cause a hang.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some of the GuC state dump messages were adding extra line feeds. When
printing via a DRM printer to dmesg, for example, that messes up the
log formatting as it loses any prefixing from the printer. Given that
the extra line feeds are just in the middle of random bits of GuC
state, there isn't any real need for them. So just remove them
completely.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031220007.4176835-1-John.C.Harrison@Intel.com
|
|
The bpg_offset array contains negative BPG offsets which fill the full 8
bits of a char thanks to two's complement: this however results in those
bits bleeding into the next field when the value is packed into DSC PPS
by the drm_dsc_helper function, which only expects range_bpg_offset to
contain 6-bit wide values. As a consequence random slices appear
corrupted on-screen (tested on a Sony Tama Akatsuki device with sdm845).
Use AND operators to limit these two's complement values to 6 bits,
similar to the AMD and i915 drivers.
Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508941/
Link: https://lore.kernel.org/r/20221026182824.876933-11-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
According to the comment this DPU register contains the bits per pixel
as a 6.4 fractional value, conveniently matching the contents of
bits_per_pixel in struct drm_dsc_config which also uses 4 fractional
bits. However, the downstream source this implementation was
copy-pasted from has its bpp field stored _without_ fractional part.
This makes the entire convoluted math obsolete as it is impossible to
pull those 4 fractional bits out of thin air, by somehow trying to reuse
the lowest 2 bits of a non-fractional bpp (lsb = bpp % 4??).
The rest of the code merely attempts to keep the integer part a multiple
of 4, which is rendered useless thanks to data |= dsc->bits_per_pixel <<
12; already filling up those bits anyway (but not on downstream).
Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/508946/
Link: https://lore.kernel.org/r/20221026182824.876933-10-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
According to the `/* bpc 8 */` comment below only values for a
bits_per_component of 8 are currently hardcoded in place. This is
further confirmed by downstream sources [1] containing different
constants for other BPC values (and different initial_offset too,
with an extra dependency on bits_per_pixel). Prevent future mishaps by
explicitly disallowing any other bits_per_component value until the
right parameters are put in place and tested.
[1]: https://git.codelinaro.org/clo/la/platform/vendor/opensource/display-drivers/-/blob/DISPLAY.LA.2.0.r1-08000-WAIPIO.0/msm/sde_dsc_helper.c#L110-139
Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508942/
Link: https://lore.kernel.org/r/20221026182824.876933-9-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
drm_dsc_config's bits_per_pixel field holds a fractional value with 4
bits, which all panel drivers should adhere to for
drm_dsc_pps_payload_pack() to generate a valid payload. All code in the
DSI driver here seems to assume that this field doesn't contain any
fractional bits, hence resulting in the wrong values being computed.
Since none of the calculations leave any room for fractional bits or
seem to indicate any possible area of support, disallow such values
altogether. calculate_rc_params() in intel_vdsc.c performs an identical
bitshift to get at this integer value.
Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508938/
Link: https://lore.kernel.org/r/20221026182824.876933-8-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
As per the FIXME this code is entirely duplicate with what is already
provided inside drm_dsc_compute_rc_parameters(), supposedly because that
function was yielding "incorrect" results while in reality the panel
driver(s?) used for testing were providing incorrect parameters.
For example, this code from downstream assumed dsc->bits_per_pixel to
contain an integer value, whereas the upstream drm_dsc_config struct
stores it with 4 fractional bits. drm_dsc_compute_rc_parameters()
already accounts for this feat while the panel driver used for testing
[1] wasn't, hence making drm_dsc_compute_rc_parameters() seem like it
was returning an incorrect result.
Other users of dsc->bits_per_pixel inside dsi_populate_dsc_params() also
treat it in the same erroneous way, and will be addressed in a separate
patch.
In the end, using drm_dsc_compute_rc_parameters() spares both a lot of
duplicate code and erratic behaviour.
[1]: https://git.linaro.org/people/vinod.koul/kernel.git/commit/?h=topic/pixel3_5.18-rc1&id=1d7d98ad564f1ec69e7525e07418918d90f247a1
Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/508939/
Link: https://lore.kernel.org/r/20221026182824.876933-7-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
This field is currently unread but will come into effect when duplicated
code below is migrated to call drm_dsc_compute_rc_parameters(), which
uses the bpc-dependent value of the local variable mux_words_size in
much the same way.
The hardcoded constant seems to be a remnant from the `/* bpc 8 */`
comment right above, indicating that this group of field assignments is
applicable to bpc = 8 exclusively and should probably bail out on
different bpc values, until constants for other bpc values are added (or
the current ones are confirmed to be correct across multiple bpc's).
Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508943/
Link: https://lore.kernel.org/r/20221026182824.876933-6-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
dsi_populate_dsc_params() is called prior to dsi_update_dsc_timing() and
already computes a value for slice_chunk_size, whose value doesn't need
to be recomputed and re-set here.
Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508934/
Link: https://lore.kernel.org/r/20221026182824.876933-5-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
This exact same math is used to compute bytes_in_slice above in
dsi_update_dsc_timing(), also used to fill slice_chunk_size.
Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508935/
Link: https://lore.kernel.org/r/20221026182824.876933-4-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
slice_per_intf is already computed for intf_width, which holds the same
value as hdisplay.
Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508933/
Link: https://lore.kernel.org/r/20221026182824.876933-3-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Multiplying a value by 2 and adding 1 to it always results in a value
that is uneven, and that 1 gets truncated immediately when performing
integer division by 2 again. There is no "rounding" possible here.
After that target_bpp_x16 is used to store a multiplication of
bits_per_pixel by 16 which is only ever read to immediately be divided
by 16 again, and is elided in much the same way.
Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/508932/
Link: https://lore.kernel.org/r/20221026182824.876933-2-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The QCM2290 SoC a the 14nm (V2.0) single DSI phy. The platform is not
fully compatible with the standard 14nm PHY, so it requires a separate
compatible and config entry.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[DB: rebased and updated commit msg]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/504578/
Link: https://lore.kernel.org/r/20220924121900.222711-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Drop the overly defensive modeset sanity checks of function parameters
which have already been checked or used by the callers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502678/
Link: https://lore.kernel.org/r/20220913085320.8577-11-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
According to the comment this DPU register contains the bits per pixel
as a 6.4 fractional value, conveniently matching the contents of
bits_per_pixel in struct drm_dsc_config which also uses 4 fractional
bits. However, the downstream source this implementation was
copy-pasted from has its bpp field stored _without_ fractional part.
This makes the entire convoluted math obsolete as it is impossible to
pull those 4 fractional bits out of thin air, by somehow trying to reuse
the lowest 2 bits of a non-fractional bpp (lsb = bpp % 4??).
The rest of the code merely attempts to keep the integer part a multiple
of 4, which is rendered useless thanks to data |= dsc->bits_per_pixel <<
12; already filling up those bits anyway (but not on downstream).
Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/508946/
Link: https://lore.kernel.org/r/20221026182824.876933-10-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Drop the overly defensive modeset sanity checks of function parameters
which have already been checked or used by the callers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/502674/
Link: https://lore.kernel.org/r/20220913085320.8577-10-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The conversion looks harmless, however the addr value is updated inside
the loop with the previous vm_end, which then incorrectly leads to
for_each_vma_range() iterating over stuff outside the range we care
about. Fix this by storing the end value separately. Also fix the case
where the range doesn't intersect with any vma, or if the vma itself
doesn't extend the entire range, which must mean we have hole at the
end. Both should result in an error, as per the previous behaviour.
v2: Fix the cases where the range is empty, or if there's a hole at
the end of the range
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7247
Testcase: igt@gem_userptr_blits@probe
Fixes: f683b9d61319 ("i915: use the VMA iterator")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028130635.465839-1-matthew.auld@intel.com
|
|
Cast error pointers when returning them as void __iomem *. Fixes
a number of Sparse warnings, such as the ones shown below.
../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces)
../drivers/gpu/drm/tiny/ofdrm.c:439:31: expected void [noderef] __iomem *
../drivers/gpu/drm/tiny/ofdrm.c:439:31: got void *
../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces)
../drivers/gpu/drm/tiny/ofdrm.c:442:31: expected void [noderef] __iomem *
../drivers/gpu/drm/tiny/ofdrm.c:442:31: got void *
See [1] for the bug report.
v3:
* use IOMEM_ERR_PTR() (Javier)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de
|
|
Properties of 32-bit integers are returned from the OF device tree
as type __be32. Convert PCI vendor and device IDs from __be32 to host
endianness before comparing them to constants. All relevant machines
are old, big-endian Macintosh systems; hence the bug never happened
in practice.
Fixes sparse warnings shown below.
drivers/gpu/drm/tiny/ofdrm.c:237:17: warning: restricted __be32 degrades to integer
drivers/gpu/drm/tiny/ofdrm.c:238:18: warning: restricted __be32 degrades to integer
drivers/gpu/drm/tiny/ofdrm.c:238:54: warning: restricted __be32 degrades to integer
See [1] for the bug report.
v2:
* convert endianness (Alex)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/dri-devel/202210192208.D888I6X7-lkp@intel.com/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-2-tzimmermann@suse.de
|
|
To continue the idea of failing the probe() rather than failing the
bind(), move the call to msm_hdmi_get_phy() function to
msm_hdmi_dev_probe(), so that the driver fails the probe if PHY is not
yet available rather than succeeding the probe and then failing the
bind() with -EPROBE_DEFER.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499652/
Link: https://lore.kernel.org/r/20220826093927.851597-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The of_find_device_by_node() already increments the device's usage
count, so there is no need to increment it again using get_device().
Drop this extra get_device().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499648/
Link: https://lore.kernel.org/r/20220826093927.851597-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Rather than having all resource allocation happen in the _bind function
(resulting in possible EPROBE_DEFER returns and component bind/unbind
cycles) allocate and check all resources in _probe function. While we
are at it, use platform_get_irq() to get the IRQ rather than going
through the irq_of_parse_and_map().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/499649/
Link: https://lore.kernel.org/r/20220826093927.851597-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
A problem about modprobe ingenic-drm failed is triggered with the following
log given:
[ 303.561088] Error: Driver 'ingenic-ipu' is already registered, aborting...
modprobe: ERROR: could not insert 'ingenic_drm': Device or resource busy
The reason is that ingenic_drm_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without unregistering ingenic_ipu_driver_ptr, resulting
the ingenic-drm can never be installed later.
A simple call graph is shown as below:
ingenic_drm_init()
platform_driver_register() # ingenic_ipu_driver_ptr are registered
platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without unregister ingenic_ipu_driver_ptr
Fixing this problem by checking the return value of
platform_driver_register() and do platform_unregister_drivers() if
error happened.
Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221104064512.8569-1-yuancan@huawei.com
|
|
Needed to bring in v6.1-rc1 which contains commit f683b9d61319 ("i915: use the VMA iterator")
which is needed for series https://patchwork.freedesktop.org/series/110083/ .
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Fix for #7306: [Arc A380] white flickering when using arc as a
secondary gpu (Matt A)
- Add Wa_18017747507 for DG2 (Wayne)
- Avoid spurious WARN on DG1 due to incorrect cache_dirty flag
(Niranjana, Matt A)
- Corrections to CS timestamp support for Gen5 and earlier (Ville)
- Fix a build error used with clang compiler on hwmon (GG)
- Improvements to LMEM handling with RPM (Anshuman, Matt A)
- Cleanups in dmabuf code (Mike)
- Selftest improvements (Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com
|
