summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2021-07-27drm/msm: Signal fences soonerRob Clark
Nothing we do to in update_fences() can't be done in an atomic context, so move this into the GPU's irq context to reduce latency (and call dma_fence_signal() so we aren't relying on dma_fence_is_signaled() which would defeat the purpose). Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20210726144359.2179302-3-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-07-27drm/msm: Let fences read directly from memptrsRob Clark
Let dma_fence::signaled, etc, read directly from the address that the hw is writing with updated completed fence seqno, so we can potentially notice that the fence is signaled sooner. Plus add some docs. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20210726144359.2179302-2-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-07-27drm/i915/guc: Unblock GuC submission on Gen11+Daniele Ceraolo Spurio
Unblock GuC submission on Gen11+ platforms. v2: (Martin Peres / John H) - Delete debug message when GuC is disabled by default on certain platforms Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-34-matthew.brost@intel.com
2021-07-27drm/i915/guc: Implement GuC priority managementMatthew Brost
Implement a simple static mapping algorithm of the i915 priority levels (int, -1k to 1k exposed to user) to the 4 GuC levels. Mapping is as follows: i915 level < 0 -> GuC low level (3) i915 level == 0 -> GuC normal level (2) i915 level < INT_MAX -> GuC high level (1) i915 level == INT_MAX -> GuC highest level (0) We believe this mapping should cover the UMD use cases (3 distinct user levels + 1 kernel level). In addition to static mapping, a simple counter system is attached to each context tracking the number of requests inflight on the context at each level. This is needed as the GuC levels are per context while in the i915 levels are per request. v2: (Daniele) - Add BUILD_BUG_ON to enforce ordering of priority levels - Add missing lockdep to guc_prio_fini - Check for return before setting context registered flag - Map DISPLAY priority or higher to highest guc prio - Update comment for guc_prio Signed-off-by: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-33-matthew.brost@intel.com
2021-07-27drm/i915/selftest: Bump selftest timeouts for hangcheckJohn Harrison
Some testing environments and some heavier tests are slower than previous limits allowed for. For example, it can take multiple seconds for the 'context has been reset' notification handler to reach the 'kill the requests' code in the 'active' version of the 'reset engines' test. During which time the selftest gets bored, gives up waiting and fails the test. There is also an async thread that the selftest uses to pump work through the hardware in parallel to the context that is marked for reset. That also could get bored waiting for completions and kill the test off. Lastly, the flush at the of various test sections can also see timeouts due to the large amount of work backed up. This is also true of the live_hwsp_read test. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-32-matthew.brost@intel.com
2021-07-27drm/i915/selftest: Fix hangcheck self test for GuC submissionJohn Harrison
When GuC submission is enabled, the GuC controls engine resets. Rather than explicitly triggering a reset, the driver must submit a hanging context to GuC and wait for the reset to occur. Conversely, one of the tests specifically sends hanging batches to the engines but wants them to sit around until a manual reset of the full GT (including GuC itself). That means disabling GuC based engine resets to prevent those from killing the hanging batch too soon. So, add support to the scheduling policy helper for disabling resets as well as making them quicker! In GuC submission mode, the 'is engine idle' test basically turns into 'is engine PM wakelock held'. Independently, there is a heartbeat disable helper function that the tests use. For unexplained reasons, this acquires the engine wakelock before disabling the heartbeat and only releases it when re-enabling the heartbeat. As one of the tests tries to do a wait for idle in the middle of a heartbeat disabled section, it is therefore guaranteed to always fail. Added a 'no_pm' variant of the heartbeat helper that allows the engine to be asleep while also having heartbeats disabled. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-31-matthew.brost@intel.com
2021-07-27drm/i915/selftest: Increase some timeouts in live_requestsMatthew Brost
Requests may take slightly longer with GuC submission, let's increase the timeouts in live_requests. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-30-matthew.brost@intel.com
2021-07-27drm/i915/selftest: Fix MOCS selftest for GuC submissionRahul Kumar Singh
When GuC submission is enabled, the GuC controls engine resets. Rather than explicitly triggering a reset, the driver must submit a hanging context to GuC and wait for the reset to occur. Signed-off-by: Rahul Kumar Singh <rahul.kumar.singh@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-29-matthew.brost@intel.com
2021-07-27drm/i915/selftest: Fix workarounds selftest for GuC submissionRahul Kumar Singh
When GuC submission is enabled, the GuC controls engine resets. Rather than explicitly triggering a reset, the driver must submit a hanging context to GuC and wait for the reset to occur. Signed-off-by: Rahul Kumar Singh <rahul.kumar.singh@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-28-matthew.brost@intel.com
2021-07-27drm/i915/selftest: Better error reporting from hangcheck selftestJohn Harrison
There are many ways in which the hangcheck selftest can fail. Very few of them actually printed an error message to say what happened. So, fill in the missing messages. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-27-matthew.brost@intel.com
2021-07-27drm/i915/guc: Support request cancellationMatthew Brost
This adds GuC backend support for i915_request_cancel(), which in turn makes CONFIG_DRM_I915_REQUEST_TIMEOUT work. This implementation makes use of fence while there are likely simplier options. A fence was chosen because of another feature coming soon which requires a user to block on a context until scheduling is disabled. In that case we return the fence to the user and the user can wait on that fence. v2: (Daniele) - A comment about locking the blocked incr / decr - A comments about the use of the fence - Update commit message explaining why fence - Delete redundant check blocked count in unblock function - Ring buffer implementation - Comment about blocked in submission path - Shorter rpm path v3: (Checkpatch) - Fix typos in commit message (Daniel) - Rework to simplier locking structure in guc_context_block / unblock Signed-off-by: Matthew Brost <matthew.brost@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-26-matthew.brost@intel.com
2021-07-27drm/i915/guc: Implement banned contexts for GuC submissionMatthew Brost
When using GuC submission, if a context gets banned disable scheduling and mark all inflight requests as complete. Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-25-matthew.brost@intel.com
2021-07-27drm/i915/guc: Add golden context to GuC ADSJohn Harrison
The media watchdog mechanism involves GuC doing a silent reset and continue of the hung context. This requires the i915 driver provide a golden context to GuC in the ADS. v2: (Matthew Brost): - Fix memory corruption in shmem_read (John H) - Use locals rather than defines for LR_* + SKIP_SIZE Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-24-matthew.brost@intel.com
2021-07-27drm/i915/guc: Include scheduling policies in the debugfs state dumpJohn Harrison
Added the scheduling policy parameters to the 'guc_info' debugfs state dump. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-23-matthew.brost@intel.com
2021-07-27drm/i915/guc: Connect reset modparam updates to GuC policy flagsJohn Harrison
Changing the reset module parameter has no effect on a running GuC. The corresponding entry in the ADS must be updated and then the GuC informed via a Host2GuC message. The new debugfs interface to module parameters allows this to happen. However, connecting the parameter data address back to anything useful is messy. One option would be to pass a new private data structure address through instead of just the parameter pointer. However, that means having a new (and different) data structure for each parameter and a new (and different) write function for each parameter. This method keeps everything generic by instead using a string lookup on the directory entry name. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-22-matthew.brost@intel.com
2021-07-27drm/i915/guc: Hook GuC scheduling policies upJohn Harrison
Use the official driver default scheduling policies for configuring the GuC scheduler rather than a bunch of hardcoded values. v2: (Matthew Brost) - Move I915_ENGINE_WANT_FORCED_PREEMPTION to later patch Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Cc: Jose Souza <jose.souza@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-21-matthew.brost@intel.com
2021-07-27drm/i915/guc: Fix for error capture after full GPU reset with GuCJohn Harrison
In the case of a full GPU reset (e.g. because GuC has died or because GuC's hang detection has been disabled), the driver can't rely on GuC reporting the guilty context. Instead, the driver needs to scan all active contexts and find one that is currently executing, as per the execlist mode behaviour. In GuC mode, this scan is different to execlist mode as the active request list is handled very differently. Similarly, the request state dump in debugfs needs to be handled differently when in GuC submission mode. Also refactured some of the request scanning code to avoid duplication across the multiple code paths that are now replicating it. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-20-matthew.brost@intel.com
2021-07-27drm/i915/guc: Capture error state on context resetMatthew Brost
We receive notification of an engine reset from GuC at its completion. Meaning GuC has potentially cleared any HW state we may have been interested in capturing. GuC resumes scheduling on the engine post-reset, as the resets are meant to be transparent, further muddling our error state. There is ongoing work to define an API for a GuC debug state dump. The suggestion for now is to manually disable FW initiated resets in cases where debug state is needed. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-19-matthew.brost@intel.com
2021-07-27drm/i915/guc: Enable GuC engine resetJohn Harrison
Clear the 'disable resets' flag to allow GuC to reset hung contexts (detected via pre-emption timeout). Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-18-matthew.brost@intel.com
2021-07-27drm/i915/guc: Don't complain about reset racesJohn Harrison
It is impossible to seal all race conditions of resets occurring concurrent to other operations. At least, not without introducing excesive mutex locking. Instead, don't complain if it occurs. In particular, don't complain if trying to send a H2G during a reset. Whatever the H2G was about should get redone once the reset is over. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-17-matthew.brost@intel.com
2021-07-27drm/i915/guc: Provide mmio list to be saved/restored on engine resetJohn Harrison
The driver must provide GuC with a list of mmio registers that should be saved/restored during a GuC-based engine reset. Unfortunately, the list must be dynamically allocated as its size is variable. That means the driver must generate the list twice - once to work out the size and a second time to actually save it. v2: (Alan / CI) - GEN7_GT_MODE -> GEN6_GT_MODE to fix WA selftest failure Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-16-matthew.brost@intel.com
2021-07-27drm/i915/guc: Enable the timer expired interrupt for GuCMatthew Brost
The GuC can implement execution qunatums, detect hung contexts and other such things but it requires the timer expired interrupt to do so. Signed-off-by: Matthew Brost <matthew.brost@intel.com> CC: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-15-matthew.brost@intel.com
2021-07-27drm/i915/guc: Handle engine reset failure notificationMatthew Brost
GuC will notify the driver, via G2H, if it fails to reset an engine. We recover by resorting to a full GPU reset. v2: (John Harrison): - s/drm_dbg/drm_err Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-14-matthew.brost@intel.com
2021-07-27drm/i915/guc: Handle context reset notificationMatthew Brost
GuC will issue a reset on detecting an engine hang and will notify the driver via a G2H message. The driver will service the notification by resetting the guilty context to a simple state or banning it completely. v2: (John Harrison) - Move msg[0] lookup after length check v3: (John Harrison) - s/drm_dbg/drm_err Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-13-matthew.brost@intel.com
2021-07-27drm/i915/guc: Suspend/resume implementation for new interfaceMatthew Brost
The new GuC interface introduces an MMIO H2G command, INTEL_GUC_ACTION_RESET_CLIENT, which is used to implement suspend. This MMIO tears down any active contexts generating a context reset G2H CTB for each. Once that step completes the GuC tears down the CTB channels. It is safe to suspend once this MMIO H2G command completes and all G2H CTBs have been processed. In practice the i915 will likely never receive a G2H as suspend should only be called after the GPU is idle. Resume is implemented in the same manner as before - simply reload the GuC firmware and reinitialize everything (e.g. CTB channels, contexts, etc..). v2: (Michel / John H) - INTEL_GUC_ACTION_RESET_CLIENT 0x5B01 -> 0x5507 Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-12-matthew.brost@intel.com
2021-07-27drm/i915/guc: Add disable interrupts to guc sanitizeMatthew Brost
Add disable GuC interrupts to intel_guc_sanitize(). Part of this requires moving the guc_*_interrupt wrapper function into header file intel_guc.h. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-11-matthew.brost@intel.com
2021-07-27drm/i915: Reset GPU immediately if submission is disabledMatthew Brost
If submission is disabled by the backend for any reason, reset the GPU immediately in the heartbeat code as the backend can't be reenabled until the GPU is reset. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-10-matthew.brost@intel.com
2021-07-27drm/i915/guc: Reset implementation for new GuC interfaceMatthew Brost
Reset implementation for new GuC interface. This is the legacy reset implementation which is called when the i915 owns the engine hang check. Future patches will offload the engine hang check to GuC but we will continue to maintain this legacy path as a fallback and this code path is also required if the GuC dies. With the new GuC interface it is not possible to reset individual engines - it is only possible to reset the GPU entirely. This patch forces an entire chip reset if any engine hangs. v2: (Michal) - Check for -EPIPE rather than -EIO (CT deadlock/corrupt check) v3: (John H) - Split into a series of smaller patches v4: (John H) - Fix typo - Add braces around if statements in reset code v5: (Checkpatch) - Fix warnings Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <john.c.harrison@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-9-matthew.brost@intel.com
2021-07-27drm/i915: Move active request tracking to a vfuncMatthew Brost
Move active request tracking to a backend vfunc rather than assuming all backends want to do this in the manner. In the of case execlists / ring submission the tracking is on the physical engine while with GuC submission it is on the context. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-8-matthew.brost@intel.com
2021-07-27drm/i915: Add i915_sched_engine destroy vfuncMatthew Brost
This is required to allow backend specific cleanup v2: (John H) - Rework commit message Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-7-matthew.brost@intel.com
2021-07-27drm/i915/guc: Direct all breadcrumbs for a class to single breadcrumbsMatthew Brost
With GuC virtual engines the physical engine which a request executes and completes on isn't known to the i915. Therefore we can't attach a request to a physical engines breadcrumbs. To work around this we create a single breadcrumbs per engine class when using GuC submission and direct all physical engine interrupts to this breadcrumbs. v2: (John H) - Rework header file structure so intel_engine_mask_t can be in intel_engine_types.h Signed-off-by: Matthew Brost <matthew.brost@intel.com> CC: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-6-matthew.brost@intel.com
2021-07-27drm/i915/guc: Disable bonding extension with GuC submissionMatthew Brost
Update the bonding extension to return -ENODEV when using GuC submission as this extension fundamentally will not work with the GuC submission interface. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-5-matthew.brost@intel.com
2021-07-27drm/i915: Hold reference to intel_context over life of i915_requestMatthew Brost
Hold a reference to the intel_context over life of an i915_request. Without this an i915_request can exist after the context has been destroyed (e.g. request retired, context closed, but user space holds a reference to the request from an out fence). In the case of GuC submission + virtual engine, the engine that the request references is also destroyed which can trigger bad pointer dref in fence ops (e.g. i915_fence_get_driver_name). We could likely change i915_fence_get_driver_name to avoid touching the engine but let's just be safe and hold the intel_context reference. v2: (John Harrison) - Update comment explaining how GuC mode and execlists mode deal with virtual engines differently Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-4-matthew.brost@intel.com
2021-07-27drm/i915/guc: Make hangcheck work with GuC virtual enginesJohn Harrison
The serial number tracking of engines happens at the backend of request submission and was expecting to only be given physical engines. However, in GuC submission mode, the decomposition of virtual to physical engines does not happen in i915. Instead, requests are submitted to their virtual engine mask all the way through to the hardware (i.e. to GuC). This would mean that the heart beat code thinks the physical engines are idle due to the serial number not incrementing. Which in turns means hangcheck does not work for GuC virtual engines. This patch updates the tracking to decompose virtual engines into their physical constituents and tracks the request against each. This is not entirely accurate as the GuC will only be issuing the request to one physical engine. However, it is the best that i915 can do given that it has no knowledge of the GuC's scheduling decisions. Downside of this is that all physical engines constituting a GuC virtual engine will be periodically unparked (even during just a single context executing) in order to be pinged with a heartbeat request. However the power and performance cost of this is not expected to be measurable (due low frequency of heartbeat pulses) and it is considered an easier option than trying to make changes to GuC firmware. v2: (Tvrtko) - Update commit message - Have default behavior if no vfunc present Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-3-matthew.brost@intel.com
2021-07-27drm/i915/guc: GuC virtual enginesMatthew Brost
Implement GuC virtual engines. Rather simple implementation, basically just allocate an engine, setup context enter / exit function to virtual engine specific functions, set all other variables / functions to guc versions, and set the engine mask to that of all the siblings. v2: Update to work with proto-ctx v3: (Daniele) - Drop include, add comment to intel_virtual_engine_has_heartbeat Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-2-matthew.brost@intel.com
2021-07-27drm/dp_mst: Fix return code on sideband message failureRajkumar Subbiah
Commit 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests") added some debug code for sideband message tracing. But it seems to have unintentionally changed the behavior on sideband message failure. It catches and returns failure only if DRM_UT_DP is enabled. Otherwise it ignores the error code and returns success. So on an MST unplug, the caller is unaware that the clear payload message failed and ends up waiting for 4 seconds for the response. Fixes the issue by returning the proper error code. Changes in V2: -- Revise commit text as review comment -- add Fixes text Changes in V3: -- remove "unlikely" optimization Fixes: 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests") Cc: <stable@vger.kernel.org> # v5.5+ Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1625585434-9562-1-git-send-email-khsieh@codeaurora.org
2021-07-27drm/i915/display: Disable audio, DRRS and PSR before planesJosé Roberto de Souza
HDMI and DisplayPort sequences states that audio and PSR should be disabled before planes are disabled. Not following it did not caused any problems up to Alderlake-P but for this platform it causes underruns during the PSR2 disable sequence. Specification don't mention that DRRS should be disabled before planes but it looks safer to switch back to the default refresh rate before following with the rest of the pipe disable sequence. BSpec: 49191 BSpec: 49190 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210726181559.80855-1-jose.souza@intel.com
2021-07-27drm: mxsfb: Clear FIFO_CLEAR bitMarek Vasut
Make sure the FIFO_CLEAR bit is latched in when configuring the controller, so that the FIFO is really cleared. And then clear the FIFO_CLEAR bit, since it is not self-clearing. Fixes: 45d59d704080 ("drm: Add new driver for MXSFB controller") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # i.Core MX8MM Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210620224946.189524-1-marex@denx.de
2021-07-27drm: mxsfb: Use bus_format from the nearest bridge if presentMarek Vasut
In case there is a bridge connected to the LCDIF, use bus_format from the bridge, otherwise behave as before and use bus_format from the connector. This way, even if there are multiple bridges in the display pipeline, the LCDIF will use the correct format. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210726194457.341696-1-marex@denx.de
2021-07-27drm: mxsfb: Increase number of outstanding requests on V4 and newer HWMarek Vasut
In case the DRAM is under high load, the MXSFB FIFO might underflow and that causes visible artifacts. This could be triggered on i.MX8MM using e.g. "$ memtester 128M" on a device with 1920x1080 panel. The first "Stuck Address" test of the memtester will completely corrupt the image on the panel and leave the MXSFB FIFO in odd state. To avoid this underflow, increase number of outstanding requests to DRAM from 2 to 16, which is the maximum. This mitigates the issue and it can no longer be triggered. Fixes: 45d59d704080 ("drm: Add new driver for MXSFB controller") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210620224759.189351-1-marex@denx.de
2021-07-27drm: mxsfb: Enable recovery on underflowMarek Vasut
There is some sort of corner case behavior of the controller, which could rarely be triggered at least on i.MX6SX connected to 800x480 DPI panel and i.MX8MM connected to DPI->DSI->LVDS bridged 1920x1080 panel (and likely on other setups too), where the image on the panel shifts to the right and wraps around. This happens either when the controller is enabled on boot or even later during run time. The condition does not correct itself automatically, i.e. the display image remains shifted. It seems this problem is known and is due to sporadic underflows of the LCDIF FIFO. While the LCDIF IP does have underflow/overflow IRQs, neither of the IRQs trigger and neither IRQ status bit is asserted when this condition occurs. All known revisions of the LCDIF IP have CTRL1 RECOVER_ON_UNDERFLOW bit, which is described in the reference manual since i.MX23 as " Set this bit to enable the LCDIF block to recover in the next field/frame if there was an underflow in the current field/frame. " Enable this bit to mitigate the sporadic underflows. Fixes: 45d59d704080 ("drm: Add new driver for MXSFB controller") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210620224701.189289-1-marex@denx.de
2021-07-27drm/amdgpu/display: only enable aux backlight control for OLED panelsAlex Deucher
We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Author: Camille Cho <Camille.Cho@amd.com> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715 Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: ensure dentist display clock update finished in DCN20Dale Zhao
[Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by: Cyr Aric <aric.cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-27drm/amd/display: Add missing DCN21 IP parameterVictor Lu
[why] IP parameter min_meta_chunk_size_bytes is read for bandwidth calculations but it was never defined. [how] Define min_meta_chunk_size_bytes and initialize value to 256. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Guard DST_Y_PREFETCH register overflow in DCN21Victor Lu
[why] DST_Y_PREFETCH can overflow when DestinationLinesForPrefetch values are too large due to the former being limited to 8 bits. [how] Set the maximum value of DestinationLinesForPrefetch to be 255 * refclk period. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amdgpu: Check pmops for desired suspend statePratik Vishwakarma
[Why] User might change the suspend behaviour from OS. [How] Check with pm for target suspend state and set s0ix flag only for s2idle state. v2: User might change default suspend state, use target state v3: squash in build fix Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-27drm/amd/display: Add ETW log to dmub_psr_get_stateWyatt Wood
[Why] GPINT commands have the lowest priority in DMCUB, so it's possible that the command isn't processed in time. [How] Add a log to help identify this case. Reviewed-by: Koo Anthony <Anthony.Koo@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Add ETW logging for AUX failuresWyatt Wood
[Why] Would like to identify the cause of AUX transactions failing via ETW logs. [How] Add ETW logging for AUX failures. Reviewed-by: Pavic Josip <Josip.Pavic@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Fix PSR command versionMikita Lipski
[why] For dual eDP when setting the new settings we need to set command version to DMUB_CMD_PSR_CONTROL_VERSION_1, otherwise DMUB will not read panel_inst parameter. [how] Instead of PSR_VERSION_1 pass DMUB_CMD_PSR_CONTROL_VERSION_1 Reviewed-by: Wood Wyatt <Wyatt.Wood@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Add missing DCN21 IP parameterVictor Lu
[why] IP parameter min_meta_chunk_size_bytes is read for bandwidth calculations but it was never defined. [how] Define min_meta_chunk_size_bytes and initialize value to 256. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-19 11:53:18 +0000