| Age | Commit message (Collapse) | Author |
|---|
|
There's no reason that I can tell why this should be per-i915_buddy_mm
and doing so causes KMEM_CACHE to throw dmesg warnings because it tries
to create a debugfs entry with the name i915_buddy_block multiple times.
We could handle this by carefully giving each slab its own name but that
brings its own pain because then we have to store that string somewhere
and manage the lifetimes of the different slabs. The most likely
outcome would be a global atomic which we increment to get a new name or
something like that.
The much easier solution is to use the i915_globals system like we do
for every other slab in i915. This ensures that we have exactly one of
them for each i915 driver load and it gets neatly created on module load
and destroyed on module unload. Using the globals system also means
that its now tied into the shrink handler so we can properly respond to
low-memory situations.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 88be9a0a06b7 ("drm/i915/ttm: add ttm_buddy_man")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
[danvet: Rebase against removal of global shrink code]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-7-jason@jlekstrand.net
|
|
If the driver was not fully loaded, we may still have globals lying
around. If we don't tear those down in i915_exit(), we'll leak a bunch
of memory slabs. This can happen two ways: use_kms = false and if we've
run mock selftests. In either case, we have an early exit from
i915_init which happens after i915_globals_init() and we need to clean
up those globals.
The mock selftests case is especially sticky. The load isn't entirely
a no-op. We actually do quite a bit inside those selftests including
allocating a bunch of mock objects and running tests on them. Once all
those tests are complete, we exit early from i915_init(). Perviously,
i915_init() would return a non-zero error code on failure and a zero
error code on success. In the success case, we would get to i915_exit()
and check i915_pci_driver.driver.owner to detect if i915_init exited early
and do nothing. In the failure case, we would fail i915_init() but
there would be no opportunity to clean up globals.
The most annoying part is that you don't actually notice the failure as
part of the self-tests since leaking a bit of memory, while bad, doesn't
result in anything observable from userspace. Instead, the next time we
load the driver (usually for next IGT test), i915_globals_init() gets
invoked again, we go to allocate a bunch of new memory slabs, those
implicitly create debugfs entries, and debugfs warns that we're trying
to create directories and files that already exist. Since this all
happens as part of the next driver load, it shows up in the dmesg-warn
of whatever IGT test ran after the mock selftests.
While the obvious thing to do here might be to call i915_globals_exit()
after selftests, that's not actually safe. The dma-buf selftests call
i915_gem_prime_export which creates a file. We call dma_buf_put() on
the resulting dmabuf which calls fput() on the file. However, fput()
isn't immediate and gets flushed right before syscall returns. This
means that all the fput()s from the selftests don't happen until right
before the module load syscall used to fire off the selftests returns
which is after i915_init(). If we call i915_globals_exit() in
i915_init() after selftests, we end up freeing slabs out from under
objects which won't get released until fput() is flushed at the end of
the module load syscall.
The solution here is to let i915_init() return success early and detect
the early success in i915_exit() and only tear down globals and nothing
else. This way the module loads successfully, regardless of the success
or failure of the tests. Because we've not enumerated any PCI devices,
no device nodes are created and it's entirely useless from userspace.
The only thing the module does at that point is hold on to a bit of
memory until we unload it and i915_exit() is called. Importantly, this
means that everything from our selftests has the ability to properly
flush out between i915_init() and i915_exit() because there is at least
one syscall boundary in between.
In order to handle all the delicate init/exit cases, we convert the
whole thing to a table of init/exit pairs and track the init status in
the new init_progress global. This allows us to ensure that i915_exit()
always tears down exactly the things that i915_init() successfully
initialized. We also allow early-exit of i915_init() without failure by
an init function returning > 0. This is useful for nomodeset, and
selftests. For the mock selftests, we convert them to always return 1
so we get the desired behavior of the driver always succeeding to load
the driver and then properly tearing down the partially loaded driver.
v2 (Tvrtko Ursulin):
- Guard init_funcs[i].exit with GEM_BUG_ON(i >= ARRAY_SIZE(init_funcs))
v2 (Daniel Vetter):
- Update the docstring for i915.mock_selftests
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-4-jason@jlekstrand.net
|
|
In the unlikely event that pci_register_device() fails, we were tearing
down our PMU setup but not globals. This leaves a bunch of memory slabs
lying around.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 32eb6bcfdda9 ("drm/i915: Make request allocation caches global")
[danvet: Fix conflicts against removal of the globals_flush
infrastructure.]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-3-jason@jlekstrand.net
|
|
We should tear down in the opposite order we set up.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-2-jason@jlekstrand.net
|
|
The mipi_dsi_device allocated by mipi_dsi_device_register_full() is
already free'd on release.
Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720134525.563936-9-maxime@cerno.tech
|
|
This essentially reverts
commit 84a1074920523430f9dc30ff907f4801b4820072
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Jan 24 11:36:08 2018 +0000
drm/i915: Shrink the GEM kmem_caches upon idling
mm/vmscan.c:do_shrink_slab() is a thing, if there's an issue with it
then we need to fix that there, not hand-roll our own slab shrinking
code in i915.
Also when this was added there was only one other caller of
kmem_cache_shrink (added 2005 to the acpi code). Now there's a 2nd one
outside of i915 code in a kunit test, which seems legit since that
wants to very carefully control what's in the kmem_cache. This out of
a total of over 500 calls to kmem_cache_create. This alone should have
been warning sign enough that we're doing something silly.
Noticed while reviewing a patch set from Jason to fix up some issues
in our i915_init() and i915_exit() module load/cleanup code. Now that
i915_globals.c isn't any different than normal init/exit functions, we
should convert them over to one unified table and remove
i915_globals.[hc] entirely.
v2: Improve commit message (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721183229.4136488-1-daniel.vetter@ffwll.ch
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.14-2021-07-21:
amdgpu:
- Yellow Carp updates
- Add some Yellow Carp DIDs
- Beige Goby updates
- CIK 10bit 4K regression fix
- GFX10 golden settings updates
- eDP panel regression fix
- Misc display fixes
- Aldebaran fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215800.17590-1-alexander.deucher@amd.com
|
|
bridge->driver_private is not set (NULL) so use bridge_to_dpi(bridge)
like it's done in bridge_atomic_get_output_bus_fmts
Fixes: ec8747c52434 ("drm/mediatek: dpi: Add bus format negotiation")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Regression found in some embedded panels traces back to the earliest
upstreamed ASSR patch. The changed code flow are causing problems
with some panels.
[How]
- Change ASSR enabling code while preserving original code flow
as much as possible
- Simplify the code on guarding with internal display flag
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add Yellow Carp PCI id support.
v2: add another DID
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
0x1681 has a different external revision id.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for board power calibration on Aldebaran.
Board calibration is done after DC offset calibration.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
PMFW message which previously thought to only control Z9 controls both
Z9 and Z10. Also HW design team requested that Z9 must only be supported
on eDP due to content protection interop.
[How]
Change zstate support condition to match updated policy
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Populate dtbclk values from bwparams for dcn302, dcn303.
[How]
dtbclk values are fetched from bandwidthparams for all DPM levels and
for DPM levels where smu returns 0, previous level values are reported.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines
of 4K resolution lines to 5 lines of 4K resolution lines. All Line
Buffer can be used as extended memory for P State change latency hiding.
The maximum number of lines is increased to 32 lines. Finally,
LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB
memory piece 2) are not affected, no change in size, only 3 pieces is
affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0
and LB_MEMORY_CONFIG_3 (for 4:2:0) modes.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to
DMUB just remove the function pointer.
[how]
Remove apply_idle_power_optimizations from function pointers structure
for DCN31
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We used to unconditionally set backlight path as AUX for panels capable
of backlight adjustment via DPCD in set default brightness.
[How]
This should be limited to OLED panel only since we control backlight via
PWM path for SDR mode in LCD HDR panel.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
We're missing a default value for dram_channel_width_bytes in the
DCN3.1 SOC bounding box and we don't currently have the interface in
place to query the actual value from VBIOS.
Put in a hardcoded default until we have the interface in place.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Hardcoding the VCO frequency isn't correct since we don't own or control
the value.
In the case where the hardcode is also missing we can't lightup display.
[How]
Query from the CLK register instead. Update the DFS frequency to be able
to compute the VCO frequency.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Initialize socclk entries in bandwidth params for dcn302, dcn303.
[How]
Fetch the sockclk values from smu for the DPM levels and for the DPM
levels where smu returns 0, previous level values are reported.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Vertical and horizontal borders in timings are treated as increasing the
active area - vblank and hblank actually shrink.
Our input into DML does not include these borders so it incorrectly
assumes it has more time than available for vstartup and tmdl
calculations for some modes with borders.
An example of such a timing would be 640x480@72Hz:
h_total: 832
h_border_left: 8
h_addressable: 640
h_border_right: 8
h_front_porch: 16
h_sync_width: 40
v_total: 520
v_border_top: 8
v_addressable: 480
v_border_bottom: 8
v_front_porch: 1
v_sync_width: 3
pix_clk_100hz: 315000
[How]
Include borders as part of destination vactive/hactive.
This change DCN20+ so it has wide impact, but the destination vactive
and hactive are only really used for vstartup calculation anyway.
Most modes do not have vertical or horizontal borders.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During S4/S5/reboot, sometimes riommu invalidation request arrive too
early, DCN may be unable to respond to the invalidation request
resulting in pstate hang.
[How]
VBIOS will force allow pstate for riommu invalidation and driver will
clear it after powering down display pipes.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
A comparison error made it possible to not iterate through all the
specified prefetch modes.
[how]
Correct "<" to "<="
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Workarounds are documented in the bspec with an exclusive upper bound
(i.e., a "fixed" stepping that no longer needs the workaround). This
makes our driver's use of an inclusive upper bound for stepping ranges
confusing; the differing notation between code and bspec makes it very
easy for mistakes to creep in.
Let's switch the upper bound of our IS_{GT,DISP}_STEP macros over to use
an exclusive upper bound like the bspec does. This also has the benefit
of helping make sure workarounds are properly handled for new minor
steppings that show up (e.g., an A1 between the A0 and B0 we already
knew about) --- if the new intermediate stepping pulls in hardware fixes
early, there will be an update to the workaround definition which lets
us know we need to change our code. If the new stepping does not pull a
hardware fix earlier, then the new stepping will already be captured
properly by the "[begin, fix)" range in the code.
We'll probably need to be extra vigilant in code review of new
workarounds for the near future to make sure developers notice the new
semantics of workaround bounds. But we just migrated a bunch of our
platforms from the IS_REVID bounds over to IS_{GT,DISP}_STEP, so people
are already adjusting to the new macros and now is a good time to make
this change too.
[mattrope: Split out display changes to apply through intel-next tree]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-8-matthew.d.roper@intel.com
|
|
Workarounds are documented in the bspec with an exclusive upper bound
(i.e., a "fixed" stepping that no longer needs the workaround). This
makes our driver's use of an inclusive upper bound for stepping ranges
confusing; the differing notation between code and bspec makes it very
easy for mistakes to creep in.
Let's switch the upper bound of our IS_{GT,DISP}_STEP macros over to use
an exclusive upper bound like the bspec does. This also has the benefit
of helping make sure workarounds are properly handled for new minor
steppings that show up (e.g., an A1 between the A0 and B0 we already
knew about) --- if the new intermediate stepping pulls in hardware fixes
early, there will be an update to the workaround definition which lets
us know we need to change our code. If the new stepping does not pull a
hardware fix earlier, then the new stepping will already be captured
properly by the "[begin, fix)" range in the code.
We'll probably need to be extra vigilant in code review of new
workarounds for the near future to make sure developers notice the new
semantics of workaround bounds. But we just migrated a bunch of our
platforms from the IS_REVID bounds over to IS_{GT,DISP}_STEP, so people
are already adjusting to the new macros and now is a good time to make
this change too.
[mattrope: Split out GT changes to apply through gt-next tree]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-8-matthew.d.roper@intel.com
|
|
RKL doesn't have PSR2 support, so PSR2-related workarounds no longer
apply.
Bspec: 53273
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-7-matthew.d.roper@intel.com
|
|
Bspec: 53273
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-6-matthew.d.roper@intel.com
|
|
Extend the workaround bound to include A1 display.
Bspec: 54370
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-5-matthew.d.roper@intel.com
|
|
DFR programming (which we enable as an optimization on gen11, but must
ensure is disabled on gen12) should be handled as a GT workaround rather
than clock gating initialization. This will ensure that the programming
of these registers is verified with our typical workaround checks.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-4-matthew.d.roper@intel.com
|
|
While doing a quick sanity check of the ICL workarounds in the driver I
noticed a few things that should be updated:
* There's no mention in the bspec that WaPipelineFlushCoherentLines
is needed on gen11 (both the current WA database and the old,
deprecated page 20196 were checked); it appears this might have just
been copied from the gen9 list? Even if this were needed, it doesn't
seem like this was the correct implementation anyway since the gen9
workaround is supposed to be implemented in the indirect context bb
(as we do in gen8_emit_flush_coherentl3_wa() on gen8/gen9).
* WaForwardProgressSoftReset does not appear in the current workaround
database. The old deprecated workaround list has a note indicating
the workaround was dropped in 2017, so we should be safe to drop it
from the code too.
While we're at it, add the formal workaround ID number to
WaDisableBankHangMode (our hardware team made a transition from
text-based workaround names to ID numbers partway through the
development of ICL, which is why some workarounds only have names, some
only have numbers, and some have both).
Bspec: 33450
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-3-matthew.d.roper@intel.com
|
|
On SKL we've been applying this workaround on H0+ steppings, which is
actually backwards; H0 is supposed to be the first stepping where the
workaround is no longer needed. Flip the bounds so that the workaround
applies to all steppings _before_ H0.
On BXT we've been applying this workaround to all steppings, but the
bspec tells us it's only needed until C0. Pre-C0 GT steppings only
appeared in pre-production hardware, which we no longer support in the
driver, so we can drop the workaround completely for this platform.
On ICL we've been applying this workaround to all steppings, but there
doesn't seem to be any indication that this workaround was ever needed
for this platform (even now-deprecated page 20196 of the bspec doesn't
mention it). We can go ahead and drop it.
I also don't see any mention of this workaround being needed for KBL,
although this may be an oversight since the workaround is needed for all
steppings of CFL. I'll leave the workaround in place for KBL to be
safe.
Bspec: 14091, 33450
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-2-matthew.d.roper@intel.com
|
|
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Add reserved bits for future feature development
- Fix issue with mismatch with type const
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This tends to take miliseconds in certain scenarios and we'd rather not
wait that long. Due to how this interacts with det size update and
locking waiting should not be necessary as compbuf updates before
unlock.
Add a watch for config error instead as that is something we actually do
care about.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reserve padding bytes for new feature implementation
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During S4/S5/reboot, sometimes riommu invalidation request arrive too
early, DCN may be unable to respond to the invalidation request
resulting in pstate hang.
[How]
VBIOS will force allow pstate for riommu invalidation and driver will
clear it after powering down display pipes.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Extend existing state collection functions to add some additional
registers useful for debug, and add state collection function for DC
hubbub
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Lowering clocks when entering S2 Idle state causes DMUB to hang with
Diags.
[how]
Do not enter S2 optimization with Diags on dcn301 to prevent DMUB hang.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
The units of the time_per_pixel variable were incorrect, this had to be
changed for the code to properly function.
[how]
The change was very straightforward, only required one line of code to
be changed where the calculation was done.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Oliver Logush <oliver.logush@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
The current logic checks if there's an upper pipe whose viewport
completely covers the current pipe viewport.
This fails in pipe splitting case as you can have layer 1 pipe that
crosses the two layer 0 pipes where it's contained in both, but neither
covers it completely, hence we allow the cursor on both layers.
[How]
Instead of trying to "sum up" rectangles from the higher level pipes
which could leave gaps and would not work generically, we will assume if
there's an upper layer that is active, it will control the HW cursor.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
currently dc has never reset this dpcd_cap.dpcd_rev.
[how]
ideally we should reset this before redo detection.
change the passive dongle only for now to reduce the impact.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The FIXED mapping is only used for ttm, and tells userspace that the
mapping type is pre-defined. This disables the other type of mmap
offsets when discrete memory is used, so fix the selftests as well.
Document the struct as well, so it shows up in docbook.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mauld: Included minor fixes from the review comments]
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714122833.766586-1-maarten.lankhorst@linux.intel.com
|
|
In 93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous
cmdparser""), the parameters to intel_engine_cmd_parser() were altered
without updating the docs, causing Fi.CI.DOCS to start failing.
Fixes: c9d9fdbc108a ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"")
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720182108.2761496-1-jason@jlekstrand.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Added 'Fixes:' tag and corrected the hash for the ancestor]
(cherry picked from commit 15eb083bdb561bb4862cd04cd0523e55483e877e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Updated Fixes tag to match fixes branch]
|
|
In 93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous
cmdparser""), the parameters to intel_engine_cmd_parser() were altered
without updating the docs, causing Fi.CI.DOCS to start failing.
Fixes: 93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"")
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720182108.2761496-1-jason@jlekstrand.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Added 'Fixes:' tag and corrected the hash for the ancestor]
|
|
My local syzbot instance hit GPF in ttm_bo_release().
Unfortunately, syzbot didn't produce a reproducer for this, but I
found out possible scenario:
drm_gem_vram_create() <-- drm_gem_vram_object kzalloced
(bo embedded in this object)
ttm_bo_init()
ttm_bo_init_reserved()
ttm_resource_alloc()
man->func->alloc() <-- allocation failure
ttm_bo_put()
ttm_bo_release()
ttm_mem_io_free() <-- bo->resource == NULL passed
as second argument
*GPF*
Added NULL check inside ttm_mem_io_free() to prevent reported GPF and
make this function NULL save in future.
Same problem was in ttm_bo_move_to_lru_tail() as Christian reported.
ttm_bo_move_to_lru_tail() is called in ttm_bo_release() and mem pointer
can be NULL as well as in ttm_mem_io_free().
Fail log:
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
...
RIP: 0010:ttm_mem_io_free+0x28/0x170 drivers/gpu/drm/ttm/ttm_bo_util.c:66
..
Call Trace:
ttm_bo_release+0xd94/0x10a0 drivers/gpu/drm/ttm/ttm_bo.c:422
kref_put include/linux/kref.h:65 [inline]
ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:470 [inline]
ttm_bo_init_reserved+0x7cb/0x960 drivers/gpu/drm/ttm/ttm_bo.c:1050
ttm_bo_init+0x105/0x270 drivers/gpu/drm/ttm/ttm_bo.c:1074
drm_gem_vram_create+0x332/0x4c0 drivers/gpu/drm/drm_gem_vram_helper.c:228
Fixes: d3116756a710 ("drm/ttm: rename bo->mem and make it a pointer")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708112518.17271-1-paskripkin@gmail.com
|
|
The register_gop_device() function registers an "efi-framebuffer" platform
device to match against the efifb driver, to have an early framebuffer for
EFI platforms.
But there is already support to do exactly the same by the Generic System
Framebuffers (sysfb) driver. This used to be only for X86 but it has been
moved to drivers/firmware and could be reused by other architectures.
Also, besides supporting registering an "efi-framebuffer", this driver can
register a "simple-framebuffer" allowing to use the siple{fb,drm} drivers
on non-X86 EFI platforms. For example, on aarch64 these drivers can only
be used with DT and doesn't have code to register a "simple-frambuffer"
platform device when booting with EFI.
For these reasons, let's remove the register_gop_device() duplicated code
and instead move the platform specific logic that's there to sysfb driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625131359.1804394-1-javierm@redhat.com
|
|
The VGA arbitration is entirely based on pci_dev structures, so just pass
that back to the set_vga_decode callback.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-8-hch@lst.de
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
All callers pass NULL as the irq_set_state argument, so remove it and
the ->irq_set_state member in struct vga_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-7-hch@lst.de
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Add a trivial wrapper for the unregister case that sets all fields to
NULL.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-6-hch@lst.de
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
|
