summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2015-12-02drm/i915: Don't register the CRT connector when it's fused off on LPT-HVille Syrjälä
LPT-H has a strap bit for fused off CRT block. Check it to see if we should register the CRT connector or not. Supposedly this also forces the ADAP enable bit to 0, so the detection we added in commit 6c03a6bd0dd8 ("drm/i915: Don't register CRT connector when it's fused off") should already catch it, but checking the fuse bit should at least do no harm. v2: Use HAS_PCH_LPT_H() (Paulo) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449005335-15192-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-02drm/i915: Use cached cdclk_freq for PWM calculationsVille Syrjälä
No need to read out cdclk from the hardware, we have it already cached in dev_priv. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448893432-6978-7-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2015-12-02drm/i915: Round the AUX clock divider to closest on all platformsVille Syrjälä
Currently we round the AUX clock divider down on g4x, to closest on HSW/BDW port A, and up everywhere else. We are supposed to get as close to 2MHz as we can, so round to closest seems like the best option. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448893432-6978-6-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2015-12-02drm/i915: Kill duplicated PNV .get_display_clock_speed() assignmentVille Syrjälä
Somehow we accumulated a duplicated .get_display_clock_speed() assignment for PNV in commit 34edce2fea69 ("drm/i915: Add cdclk extraction for g33, g965gm and g4x") No real harm on having two, we just never reach the second one, so simply kill it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448893432-6978-5-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2015-12-02drm/i915: Add HAS_PCH_LPT_H()Ville Syrjälä
We have HAS_PCH_LPT_LP() already, so add HAS_PCH_LPT_H() and use it where appropriate. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448893432-6978-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2015-12-02drm/i915: Fix vbt PWM max setup for CTGVille Syrjälä
CTG uses hrawclk for backlight, so calculate the max based on that instead of cdclk. Fixes: aa17cdb4f836 ("drm/i915: initialize backlight max from VBT") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448893432-6978-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2015-12-02drm/i915: Fix VBT backlight Hz to PWM conversion for PNVVille Syrjälä
Convert the MHz number coming from intel_rawclk() into Hz in i9xx_hz_to_pwm() on PNV. Otherwise we'll get something totally bogus as a result. Fixes: aa17cdb4f836 ("drm/i915: initialize backlight max from VBT") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448893432-6978-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2015-12-02drm/i915/bxt: backlight clock gating workaroundImre Deak
Per bspec, "Backlight PWM may stop in the asserted state, causing backlight to stay fully on. WA: Before disabling PWM, set CLKGATE_DIS_0 0x46530 bit 13 PWM1 Gating Dis (for PWM1) or bit 14 PWM2 Gating Dis (for PWM2). The bits can remain set without harm." (There's no workaround name for this.) This fixes some Broxton backlight issues. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [Jani: cleanup & commit message] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448958232-26520-3-git-send-email-jani.nikula@intel.com
2015-12-02drm/i915: use default 200 Hz backlight frequencyJani Nikula
If the backlight modulation frequency can't be extracted from the registers or from VBT, use 200 Hz as the default. This may enable backlight on some machines that previously failed. Reviewed-by: Imre Deak <imre.deak@intel.com> Tested-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448958232-26520-2-git-send-email-jani.nikula@intel.com
2015-12-02drm/i915/bxt: add support for setting backlight freq from vbtJani Nikula
The only missing piece is the function to convert frequency to PWM register value. The PWM is based on 19.2 MHz clock, except for BXT A step, which is based on CDCLK, and which we ignore. Reviewed-by: Imre Deak <imre.deak@intel.com> Tested-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448958232-26520-1-git-send-email-jani.nikula@intel.com
2015-12-02Merge branch 'drm-fixes-rockchip-2015-12-02' of ↵Dave Airlie
https://github.com/markyzq/kernel-drm-rockchip into drm-fixes Rockchip fixes from Mark. * 'drm-fixes-rockchip-2015-12-02' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: Use CRTC vblank event interface drm/rockchip: Fix module autoload for OF platform driver drm/rockchip: vop: fix window origin calculation drm/rockchip: unset pgoff when mmap'ing gems drm/rockchip: vop: Correct enabled clocks during setup
2015-12-02drm/rockchip: Use CRTC vblank event interfaceDaniel Stone
Passing -1 as the pipe for vblank events now triggers a WARN_ON, but had previously made multi-screen unusable anyway. Pass the correct pipe to the event-send function, and use the new API to make this a bit easier for us. Fixes WARN present since cc1ef118fc for every pageflip event sent: [ 209.549969] ------------[ cut here ]------------ [ 209.554592] WARNING: CPU: 3 PID: 238 at drivers/gpu/drm/drm_irq.c:924 drm_vblank_count_and_time+0x80/0x88 [drm]() [ 209.564832] Modules linked in: [...] [ 209.612401] CPU: 3 PID: 238 Comm: irq/41-ff940000 Tainted: G W 4.3.0-rc6+ #71 [ 209.620647] Hardware name: Rockchip (Device Tree) [ 209.625348] [<c001bb80>] (unwind_backtrace) from [<c001615c>] (show_stack+0x20/0x24) [ 209.633079] [<c001615c>] (show_stack) from [<c02b2c50>] (dump_stack+0x8c/0x9c) [ 209.640289] [<c02b2c50>] (dump_stack) from [<c0052e88>] (warn_slowpath_common+0x94/0xc4) [ 209.648364] [<c0052e88>] (warn_slowpath_common) from [<c0052f74>] (warn_slowpath_null+0x2c/0x34) [ 209.657139] [<c0052f74>] (warn_slowpath_null) from [<bf17dc30>] (drm_vblank_count_and_time+0x80/0x88 [drm]) [ 209.666875] [<bf17dc30>] (drm_vblank_count_and_time [drm]) from [<bf17e484>] (drm_send_vblank_event+0x74/0x7c [drm]) [ 209.677385] [<bf17e484>] (drm_send_vblank_event [drm]) from [<bf4c1144>] (vop_win_state_complete+0x4c/0x70 [rockchip_drm_vop]) [ 209.688757] [<bf4c1144>] (vop_win_state_complete [rockchip_drm_vop]) from [<bf4c3bdc>] (vop_isr_thread+0x170/0x1d4 [rockchip_drm_vop]) [ 209.700822] [<bf4c3bdc>] (vop_isr_thread [rockchip_drm_vop]) from [<c00ab93c>] (irq_thread_fn+0x2c/0x50) [ 209.710284] [<c00ab93c>] (irq_thread_fn) from [<c00abcac>] (irq_thread+0x13c/0x188) [ 209.717927] [<c00abcac>] (irq_thread) from [<c00723c8>] (kthread+0xec/0x104) [ 209.724965] [<c00723c8>] (kthread) from [<c0011638>] (ret_from_fork+0x14/0x3c) [ 209.732171] ---[ end trace 0690bc604f5d535d ]--- Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Thierry Reding <treding@nvidia.com> Cc: Heiko Stuebner <heiko@sntech.de> Tested-By: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Thierry Reding <treding@nvidia.com>
2015-12-02drm/rockchip: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
2015-12-02drm/rockchip: vop: fix window origin calculationDominik Behr
VOP_WINx_DSP_ST does not require subtracting 1 from the values written to it. It actually causes the screen to be shifted by one pixel. Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Tested-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dominik Behr <dbehr@chromium.org> Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-02drm/rockchip: unset pgoff when mmap'ing gemsHeiko Stuebner
Commit 371f0f085f629 ("ARM: 8426/1: dma-mapping: add missing range check in dma_mmap()") introduced offset-checking for mappings, which collides with the fake-offset the drm sets for gems. Other drm-drivers set this offset to 0 before doing the mapping, so this looks like the correct way to go for rockchip as well. Fixes: 371f0f085f629 ("ARM: 8426/1: dma-mapping: add missing range check in dma_mmap()") Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-01drm/i915/bxt: Disable power well supportMatt Roper
BXT power well support is not yet stable. Starting with patch commit 9f836f9016ad5320e0c9230419d2102cf15a28aa Author: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Date: Mon Nov 16 16:20:01 2015 +0100 drm/i915/gen9: Turn DC handling into a power well DPMS off operations may actually cause the entire system to powerdown or reboot. Disable power well support for now until Broxton gets fixes similar to what we have for SKL. Cc: Imre Deak <imre.deak@intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-November/081037.html Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448990818-11005-1-git-send-email-matthew.d.roper@intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2015-12-01drm/i915: Use intel_pipe_will_have_type() in ironlake_crtc_compute_clock()Ville Syrjälä
ironlake_crtc_compute_clock() gets called during atomic compute phase, so we must check the future pipe type instead of the current type. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448462131-13321-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-01drm/i915: Don't use crtc->config when reading out infoframe stateVille Syrjälä
The .get_config() hooks should not reference anything in crtc->config, everything should be based on the passed in pipe_config instead. So don't dig out the cpu_transcoder from crtc->config on ddi platfforms, and also avoid using the encoder->crtc link and instead look up the pipe via pipe_config->base.crtc. I don't think this will actually fix anything since during the initial state readout we set up the encoder->crtc link prior to calling .get_config(), and during the modeset state check the encoder->crtc ought to be correct anyway since it's that state we just programmed. But this seems the right thing to do anyway. While at it, do some house cleaning on the local variables in the .infoframe_enabled() hooks. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448555227-31403-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-01drm/rockchip: vop: Correct enabled clocks during setupSjoerd Simons
When doing the initial setup both the hclk and the aclk need to be enabled otherwise the board will simply hang. This only occurs when building the vop driver as a module, when its built-in the initial setup happens to run before the clock framework shuts of unused clocks (including the aclk). While there also switch to doing prepare and enable in one step rather then separate steps to reduce the amount of code required. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Mark Yao <mark.yao@rock-chips.com> Tested-by: Yakir Yang <ykk@rock-chips.com> Tested-by: Romain Perier <romain.perier@gmail.com>
2015-12-01drm/gma500: Add driver private mutex for the fault handlerDaniel Vetter
There's currently two places where the gma500 fault handler relies upon dev->struct_mutex: - To protect r->mappping - To make sure vm_insert_pfn isn't called concurrently (in which case the 2nd thread would get an error code). Everything else (specifically psb_gtt_pin) is already protected by some other locks. Hence just create a new driver-private mmap_mutex just for this function. With this gma500 is complete dev->struct_mutex free! Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448271183-20523-21-git-send-email-daniel.vetter@ffwll.ch
2015-12-01drm/gma500: Drop dev->struct_mutex from mmap offset functionDaniel Vetter
Simply forgotten about this when I was doing my general cleansing of simple gem mmap offset functions. There's nothing but core functions called here, and they all have their own protection already. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448271183-20523-20-git-send-email-daniel.vetter@ffwll.ch
2015-12-01drm/gma500: Drop dev->struct_mutex from fbdev init/teardown codeDaniel Vetter
This is init/teardown code, locking is just to appease locking checks. And since gem create/free doesn't need this any more there's really no reason for grabbing dev->struct_mutex. Again important to switch obj_unref to _unlocked variants. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448271183-20523-19-git-send-email-daniel.vetter@ffwll.ch
2015-12-01drm/gma500: Drop dev->struct_mutex from modeset codeDaniel Vetter
It's either init code or already protected by other means. Note that psb_gtt_pin/unpin has it's own lock, and that's really the only piece of driver private state - all the modeset state is protected with modeset locks already. The only important bit is to switch all gem_obj_unref calls to the _unlocked variant. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448271183-20523-18-git-send-email-daniel.vetter@ffwll.ch
2015-12-01drm/gma500: Use correct unref in the gem bo create functionDaniel Vetter
This is called without dev->struct_mutex held, we need to use the _unlocked variant. Never caught in the wild since you'd need an evil userspace which races a gem_close ioctl call with the in-progress open. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448271183-20523-17-git-send-email-daniel.vetter@ffwll.ch
2015-12-01drm/i915: Check the timeout passed to i915_wait_requestChris Wilson
We have relied upon the sole caller (wait_ioctl) validating the timeout argument. However, when waiting for multiple requests I forgot to ensure that the timeout was still positive on the later requests. This is more simply done inside __i915_wait_request. Fixes regression introduced in commit b47161858ba13c9c7e03333132230d66e008dd55 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Apr 27 13:41:17 2015 +0100 drm/i915: Implement inter-engine read-read optimisations The impact of the regression is 1 jiffie for each extra active ring for a wait_ioctl with a timeout -- I don't think anyone has noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448544702-5594-1-git-send-email-chris@chris-wilson.co.uk Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-12-01drm/i915: fix fdi related fifo underruns on hswDaniel Vetter
Similar to commit 37ca8d4ccd9860df0747aa2ea281a3c9c4bf8826 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Oct 30 19:20:27 2015 +0200 drm/i915: Enable PCH FIFO underruns later on ILK/SNB/IVB we can only enable fifo underrun reporting when using the fdi/lpt after everything is set up and after a bit of waiting. The waiting is required, enabling it right after enabling encoders will first trigger an underrun on the pch and then, 1 frame later, an underrun on the cpu. Two vblank waits after encoder enabling seems enough to curb it. And similar to Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Nov 20 22:09:18 2015 +0200 drm/i915: Suppress spurious CPU FIFO underruns on ILK-IVB we also need to make sure cpu fifo underrun reporting is disabled when enabling the fdi rx/tx and pch transcoder&port. But somehow this is only needed when enabling, not also when disabling. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448705139-12534-1-git-send-email-daniel.vetter@ffwll.ch Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91578 Tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-01drm/edid: Make the detailed timing CEA/HDMI mode fixup accept up to 5kHz ↵Ville Syrjälä
clock difference Rather than using drm_match_cea_mode() to see if the EDID detailed timings are supposed to represent one of the CEA/HDMI modes, add a special version of that function that takes in an explicit clock tolerance value (in kHz). When looking at the detailed timings specify the tolerance as 5kHz due to the 10kHz clock resolution limit inherent in detailed timings. drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks, which only allows smaller errors for lower clocks (eg. for 25200 it won't allow any error) and a bigger error for higher clocks (eg. for 297000 it actually matches 296913-297000). So it doesn't really match what we want for the fixup. Using the explicit +-5kHz is much better for this use case. Not sure if we should change the normal mode matching to also use something else besides KHZ2PICOS() since it allows a different proportion of error depending on the clock. I believe VESA CVT allows a maximum deviation of .5%, so using that for normal mode matching might be a good idea? Cc: Adam Jackson <ajax@redhat.com> Tested-by: nathan.d.ciobanu@linux.intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217 Fixes: fa3a7340eaa1 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-01virtio-gpu: use no-merge for fill-modesMarc-André Lureau
Avoid the sticky preferred mode bit by using the no-merge version of the function (this allows gnome-shell to resize to lower resolutions than the default resolution) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-12-01Merge tag 'drm-intel-next-2015-11-20-merged' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next drm-intel-next-2015-11-20-rebased: 4 weeks because of my vacation, so a bit more: - final bits of the typesafe register mmio functions (Ville) - power domain fix for hdmi detection (Imre) - tons of fixes and improvements to the psr code (Rodrigo) - refactoring of the dp detection code (Ander) - complete rework of the dmc loader and dc5/dc6 handling (Imre, Patrik and others) - dp compliance improvements from Shubhangi Shrivastava - stop_machine hack from Chris to fix corruptions when updating GTT ptes on bsw - lots of fifo underrun fixes from Ville - big pile of fbc fixes and improvements from Paulo - fix fbdev failures paths (Tvrtko and Lukas Wunner) - dp link training refactoring (Ander) - interruptible prepare_plane for atomic (Maarten) - basic kabylake support (Deepak&Rodrigo) - don't leak ringspace on resets (Chris) drm-intel-next-2015-10-23: - 2nd attempt at atomic watermarks from Matt, but just prep for now - fixes all over * tag 'drm-intel-next-2015-11-20-merged' of git://anongit.freedesktop.org/drm-intel: (209 commits) drm/i915: Update DRIVER_DATE to 20151120 drm/i915: take a power domain reference while checking the HDMI live status drm/i915: take a power domain ref only when needed during HDMI detect drm/i915: Tear down fbdev if initialization fails async: export current_is_async() Revert "drm/i915: Initialize HWS page address after GPU reset" drm/i915: Fix oops caused by fbdev initialization failure drm/i915: Fix i915_ggtt_view_equal to handle rotation correctly drm/i915: Stuff rotation params into view union drm/i915: Drop return value from intel_fill_fb_ggtt_view drm/i915 : Fix to remove unnecsessary checks in postclose function. drm/i915: add MISSING_CASE to a few port/aux power domain helpers drm/i915/ddi: fix intel_display_port_aux_power_domain() after HDMI detect drm/i915: Remove platform specific *_dp_detect() functions drm/i915: Don't do edp panel detection in g4x_dp_detect() drm/i915: Send TP1 TP2/3 even when panel claims no NO_TRAIN_ON_EXIT. drm/i915: PSR: Don't Skip aux handshake on DP_PSR_NO_TRAIN_ON_EXIT. drm/i915: Reduce PSR re-activation time for VLV/CHV. drm/i915: Delay first PSR activation. drm/i915: Type safe register read/write ...
2015-12-01Merge tag 'topic/drm-misc-2015-11-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next Here's the first drm-misc pull, with really mostly misc stuff all over. Somewhat invasive is only Ville's change to mark the arg struct for fb_create const - that might conflict with a new driver pull. So better to get in fast. * tag 'topic/drm-misc-2015-11-26' of git://anongit.freedesktop.org/drm-intel: drm/mm: use list_next_entry drm/i915: fix potential dangling else problems in for_each_ macros drm: fix potential dangling else problems in for_each_ macros drm/sysfs: Send out uevent when connector->force changes drm/atomic: Small documentation fix. drm/mm: rewrite drm_mm_for_each_hole drm/sysfs: Grab lock for edid/modes_show drm: Print the src/dst/clip rectangles in error in drm_plane_helper drm: Add "prefix" parameter to drm_rect_debug_print() drm: Keep coordinates in the typical x, y, w, h order instead of x, y, h, w drm: Pass the user drm_mode_fb_cmd2 as const to .fb_create() drm: modes: replace simple_strtoul by kstrtouint drm: Describe the Rotation property bits. drm: Remove unused fbdev_list members GPU-DRM: Delete unnecessary checks before drm_property_unreference_blob() drm/dp: add eDP DPCD backlight control bit definitions drm/tegra: Remove local fbdev emulation Kconfig option drm/imx: Remove local fbdev emulation Kconfig option drm/gem: Update/Polish docs drm: Update GEM refcounting docs
2015-12-01Merge tag 'drm-intel-fixes-2015-11-30' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes few i915 fixes. * tag 'drm-intel-fixes-2015-11-30' of git://anongit.freedesktop.org/drm-intel: drm/i915: Don't override output type for DDI HDMI drm/i915: Don't compare has_drrs strictly in pipe config drm/i915: Mark uneven memory banks on gen4 desktop as unknown swizzling
2015-11-30drm: imx: imx-tve: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-11-30add blacklist for thinkpad T40pPavel Machek
Thinkpad T40p needs agpmode 1. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-11-30drm/amdgpu: fix VM page table reference countingChristian König
We use the reservation object of the page directory for the page tables as well, because of this the page directory should be freed last. Ensure that by keeping a reference from the page tables to the directory. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-11-30drm/amdgpu: fix userptr flags checkChristian König
That got messed up while porting it from Radeon. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-11-30drm/i915: add has_dsi_encoder to crtc stateJani Nikula
DSI has quite a few special cases, like DP, so add it to crtc state. This way we can get rid of a number of intel_pipe_has_type() checks for DSI. This isn't necessarily the prettiest way, but it's a step towards being aligned with what's being done with other encoders. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448619706-21293-3-git-send-email-jani.nikula@intel.com
2015-11-30drm/i915: remove pre_pll_enable hook from DDI/gen9+ crtc enableJani Nikula
The hook was added to cater for DSI, but with the hooks rearranged on the DSI encoder side, this is no longer needed. It was a bit silly anyway to have two hooks called back-to-back. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448619706-21293-2-git-send-email-jani.nikula@intel.com
2015-11-30drm/i915/dsi: merge pre_pll_enable hook to pre_enableJani Nikula
For DSI, the pre_pll_enable and the pre_enable hooks are called back-to-back on all platforms that support DSI. The distinction is artificial for DSI, for which we enable the DSI PLL in the encoder hooks. Do everything in pre_enable, and remove DSI pre_pll_enable hook. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448619706-21293-1-git-send-email-jani.nikula@intel.com
2015-11-30drm/i915: Fix possible null dereference in framebuffer_info debugfs functionNamrta Salonie
Found by static code analysis tool. v2: Inserted block instead of goto & renamed variables (Chris) v3: Aligned code as per the opening brace (Chris) Rebased on top of nightly (Daniel) Signed-off-by: Namrta Salonie <namrta.salonie@intel.com> Signed-off-by: Deepak S <deepak.s@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-30drm/atomic_helper: Add drm_atomic_helper_disable_planes_on_crtc()Jyri Sarha
Add drm_atomic_helper_disable_planes_on_crtc() for disabling all planes associated with the given CRTC. This can be used for instance in the CRTC helper disable callback to disable all planes before shutting down the display pipeline. v2: - Address Daniels review comments [1] - Do atomic_begin() and atomic_flush() always if they are defined and atomic knob is set - update kerneldoc - Put drm_atomic_helper_disable_planes_on_crtc() after drm_atomic_helper_commit_planes_on_crtc() in drm_atomic_helper.c to have functions in the same order as in drm_atomic_helper.h Signed-off-by: Jyri Sarha <jsarha@ti.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448633641-6486-1-git-send-email-jsarha@ti.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-28Merge branch 'linux-4.4' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Ben Skeggs wrote: A couple of regression fixes, some more boards whitelisted for a hw bug workaround, gr/ucode fixes for hangs a user is seeing. The changes look larger than they actually are due to the ucode binaries (*.fucN.h) being regenerated. * 'linux-4.4' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/volt/pwm/gk104: fix an off-by-one resulting in the voltage not being set drm/nouveau/nvif: allow userspace access to its own client object drm/nouveau/gr/gf100-: fix oops when calling zbc methods drm/nouveau/gr/gf117-: assume no PPC if NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK is zero drm/nouveau/gr/gf117-: read NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK from correct GPC drm/nouveau/gr/gf100-: split out per-gpc address calculation macro drm/nouveau/bios: return actual size of the buffer retrieved via _ROM drm/nouveau/instmem: protect instobj list with a spinlock drm/nouveau/pci: enable c800 magic for some unknown Samsung laptop drm/nouveau/pci: enable c800 magic for Clevo P157SM
2015-11-26drm/i915: Fix kerneldoc indent failsVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448461290-12333-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-26drm/i915: Introduce bdw_{update,enable,disable}_pipe_irq()Ville Syrjälä
Pull the BDW+ DE pipe interrupt mask frobbing into a central place, like we have for other platforms. v2: Fix the kerneldoc (Daniel) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448294777-13722-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-26drm/i915: Make ironlake_{enable,disable}_display_irq() static inlinesVille Syrjälä
ironlake_{enable,disable}_display_irq() each just call ilk_update_display_irq() so let's make them static inlines. While at it s/ironlake/ilk/ to make things shorter, and a bit more consistent with the ibx functions. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448294777-13722-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-26drm/i915: Make ibx_{enable,disable}_display_interrupt() static inlinesVille Syrjälä
No reason why ibx_{enable,disable}_display_interrupt() couldn't be static inlines instead of cpp macros. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448294777-13722-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-26drm/vmwgfx: fix a warning messageDan Carpenter
The WARN_ON() macro only takes a condition argument, it doesn't take a message. I have converted this to WARN() instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-11-26drm/ttm: Fixed a read/write lock imbalanceThomas Hellstrom
In ttm_write_lock(), the uninterruptible path should call __ttm_write_lock() not __ttm_read_lock(). This fixes a vmwgfx hang on F23 start up. syeh: Extracted this from one of Thomas' internal patches. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-11-26Revert "drm/i915: shut up gen8+ SDE irq dmesg noise"Jani Nikula
This reverts commit 97e5ed1111dcc5300a0f59a55248cd243937a8ab Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Oct 23 10:56:12 2015 +0200 drm/i915: shut up gen8+ SDE irq dmesg noise With the proper fix ("drm/i915: fix the SDE irq dmesg warnings properly") reliably in place, bring back the error message. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448462843-32739-2-git-send-email-jani.nikula@intel.com
2015-11-26drm/i915: fix the SDE irq dmesg warnings properlyJani Nikula
We had the "The master control interrupt lied (SDE)!" check and error message in place for a long time without any problems, until commit aaf5ec2e51ab1d9c5e962b4728a1107ed3ff7a3e Author: Sonika Jindal <sonika.jindal@intel.com> Date: Wed Jul 8 17:07:47 2015 +0530 drm/i915: Handle HPD when it has actually occurred caused the errors to start happening. This was bisected and reported, but the error message was silenced in commit 97e5ed1111dcc5300a0f59a55248cd243937a8ab Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Oct 23 10:56:12 2015 +0200 drm/i915: shut up gen8+ SDE irq dmesg noise shooting the messenger while the debugging for why Sonika's commit triggered the errors was still in progress. It looks like we need to read and acknowledge the PCH_PORT_HOTPLUG register even though the hotplug trigger indicates there isn't a hotplug irq to handle. The PCH doesn't seem to really ack the the interrupt to the CPU unless we touch the hotplug register. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92084 Fixes: aaf5ec2e51ab ("drm/i915: Handle HPD when it has actually occurred") [Jani: added a comment and amended the commit message while applying] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1448462843-32739-1-git-send-email-jani.nikula@intel.com
2015-11-26drm: Serialise multiple event readersChris Wilson
The previous patch reintroduced a race condition whereby a failure in one reader may allow a second reader to see out-of-order events. Introduce a mutex to serialise readers so that an event is completed in its entirety before another reader may process an event. The two readers may race against each other, but the events each retrieves are in the correct order. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1448462343-2072-2-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit (git 2.34.1) at 2025-09-24 09:46:25 +0000