summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2023-03-16drm/nouveau/nvfw/acr: set wpr_generic_header_dump storage-class-specifier to ↵Tom Rix
static gcc with W=1 reports drivers/gpu/drm/nouveau/nvkm/nvfw/acr.c:49:1: error: no previous prototype for ‘wpr_generic_header_dump’ [-Werror=missing-prototypes] 49 | wpr_generic_header_dump(struct nvkm_subdev *subdev, | ^~~~~~~~~~~~~~~~~~~~~~~ wpr_generic_header_dump is only used in acr.c, so it should be static Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230302124819.686469-1-trix@redhat.com
2023-03-16drm/nouveau/fifo: set nvkm_engn_cgrp_get storage-class-specifier to staticTom Rix
smatch reports drivers/gpu/drm/nouveau/nvkm/engine/fifo/runl.c:33:18: warning: symbol 'nvkm_engn_cgrp_get' was not declared. Should it be static? nvkm_engn_cgrp_get is only used in runl.c, so it should be static Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230228221533.3240520-1-trix@redhat.com
2023-03-16drm/nouveau/fifo: set gf100_fifo_nonstall_block_dump storage-class-specifier ↵Tom Rix
to static gcc with W=1 reports drivers/gpu/drm/nouveau/nvkm/engine/fifo/gf100.c:451:1: error: no previous prototype for ‘gf100_fifo_nonstall_block’ [-Werror=missing-prototypes] 451 | gf100_fifo_nonstall_block(struct nvkm_event *event, int type, int index) | ^~~~~~~~~~~~~~~~~~~~~~~~~ gf100_fifo_nonstall_block is only used in gf100.c, so it should be static Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230303132731.1919329-1-trix@redhat.com
2023-03-16drm/i915/opregion: Fix CONFIG_ACPI=n builds adding missing ↵Imre Deak
intel_opregion_cleanup() prototype Add the missing intel_opregion_cleanup() prototype fixing CONFIG_ACPI=n builds. Fixes: 3e226e4a2180 ("drm/i915/opregion: Cleanup opregion after errors during driver loading") Cc: Jani Nikula <jani.nikula@intel.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303141610.6L1VO7Gw-lkp@intel.com/ Signed-off-by: Imre Deak <imre.deak@intel.com>
2023-03-15drm/amdgpu: Don't resume IOMMU after incomplete initFelix Kuehling
Check kfd->init_complete in kgd2kfd_iommu_resume, consistent with other kgd2kfd calls. This should fix IOMMU errors on resume from suspend when KFD IOMMU initialization failed. Reported-by: Matt Fagnani <matt.fagnani@bell.net> Link: https://lore.kernel.org/r/4a3b225c-2ffd-e758-4de1-447375e34cad@bell.net/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=217170 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2454 Cc: Vasant Hegde <vasant.hegde@amd.com> Cc: Linux regression tracking (Thorsten Leemhuis) <regressions@leemhuis.info> Cc: stable@vger.kernel.org Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Matt Fagnani <matt.fagnani@bell.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd: fix compilation issue with legacy gccbobzhou
This patch is used to fix following compilation issue with legacy gcc error: ‘for’ loop initial declarations are only allowed in C99 mode Signed-off-by: bobzhou <bob.zhou@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amdgpu: Retire pcie_gen3_enable functionHawking Zhang
Not needed since from vi. drop the function so we don't duplicate code when introduce new asics. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amdgpu: Move to common helper to query soc rev_idHawking Zhang
Replace soc15, nv, soc21 get_rev_id callback with common helper so we don't need to duplicate code when introduce new asics. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amdgpu: Move to common indirect reg access helperHawking Zhang
Replace soc15, nv, soc21 specific callbacks with common one. so we don't need to duplicate code when introduce new asics. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amdgpu: drop ras check at asic level for new blocksHawking Zhang
amdgpu_ras_register_ras_block should always be invoked by ras_sw_init, where driver needs to check ras caps at ip level, instead of asic level. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amdgpu: Rework pcie_bif ras sw_initHawking Zhang
pcie_bif ras blocks needs to be initialized as early as possible to handle fatal error detected in hw_init phase. also align the pcie_bif ras sw_init with other ras blocks Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amdgpu: Rework xgmi_wafl_pcs ras sw_initHawking Zhang
To align with other IP blocks. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amdgpu: Rework mca ras sw_initHawking Zhang
To align with other IP blocks Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amdkfd: Fixed kfd_process cleanup on module exit.David Belanger
Handle case when module is unloaded (kfd_exit) before a process space (mm_struct) is released. v2: Fixed potential race conditions by removing all kfd_process from the process table first, then working on releasing the resources. v3: Fixed loop element access / synchronization. Fixed extra empty lines. Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: 3.2.227Aric Cyr
This version brings along the following: - FW Release 0.0.158.0 - Fixes to HDCP, DP MST and more - Improvements on USB4 links and more - Code re-architecture on link.h Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: [FW Promotion] Release 0.0.158.0Anthony Koo
[Why & How] Add boot control bit to control dispclk and dppclk deep sleep Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: fix assert conditionSamson Tam
[Why & How] Reversed assert condition when checking that phy_pix_clk[] is not 0 Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: Clearly states if long or short HPD event in dmesg logsStylon Wang
[Why] The log "DMUB HPD callback" is crucial to identify when DP tunneling is been established and driver is notified of this event from DMUB. Same log is shared for long and short hotplug event and we need to check trailing DC debug log to distinguish between them two, making debugging on DPIA related issues a bit more troublesome. [How] Clearly states in dmesg logs whether this is a long or short hotplug event. Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: Make DCN32 functions available to future DCNsWesley Chalmers
[Why & How] Make DCN32 functions available for more DCNs. Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amdgpu: Init MMVM_CONTEXTS_DISABLE in gmc11 golden setting under SRIOVYifan Zha
[Why] If disable the mmhub vm contexts(set MMVM_CONTEXTS_DISABLE to 0xffff), driver loading failed on vf due to fence fallback timer expired on all rings. FLR cannot reset MMVM_CONTEXTS_DISABLE. So this vf can not be recovered anymore unless trigger a whole gpu reset. [How] Under SRIOV, init MMVM_CONTEXTS_DISABLE in gmc11 golden register setting. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Horace Chen <Horace.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: reallocate DET for dual displays with high pixel rate ratioSamson Tam
[Why] For dual displays where pixel rate is much higher on one display, we may get underflow when DET is evenly allocated. [How] Allocate less DET segments for the lower pixel rate display and more DET segments for the higher pixel rate display Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: disconnect MPCC only on OTG changeAyush Gupta
[Why] Framedrops are observed while playing Vp9 and Av1 10 bit video on 8k resolution using VSR while playback controls are disappeared/appeared [How] Now ODM 2 to 1 is disabled for 5k or greater resolutions on VSR. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Ayush Gupta <ayugupta@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: Fix DP MST sinks removal issueCruise Hung
[Why] In USB4 DP tunneling, it's possible to have this scenario that the path becomes unavailable and CM tears down the path a little bit late. So, in this case, the HPD is high but fails to read any DPCD register. That causes the link connection type to be set to sst. And not all sinks are removed behind the MST branch. [How] Restore the link connection type if it fails to read DPCD register. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: hpd rx irq not working with eDP interfaceRobin Chen
[Why] This is the fix for the defect of commit ab144f0b4ad6 ("drm/amd/display: Allow individual control of eDP hotplug support"). [How] To revise the default eDP hotplug setting and use the enum to git rid of the magic number for different options. Fixes: ab144f0b4ad6 ("drm/amd/display: Allow individual control of eDP hotplug support") Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amdgpu: Don't resume IOMMU after incomplete initFelix Kuehling
Check kfd->init_complete in kgd2kfd_iommu_resume, consistent with other kgd2kfd calls. This should fix IOMMU errors on resume from suspend when KFD IOMMU initialization failed. Reported-by: Matt Fagnani <matt.fagnani@bell.net> Link: https://lore.kernel.org/r/4a3b225c-2ffd-e758-4de1-447375e34cad@bell.net/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=217170 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2454 Cc: Vasant Hegde <vasant.hegde@amd.com> Cc: Linux regression tracking (Thorsten Leemhuis) <regressions@leemhuis.info> Cc: stable@vger.kernel.org Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Matt Fagnani <matt.fagnani@bell.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amdkfd: Fixed kfd_process cleanup on module exit.David Belanger
Handle case when module is unloaded (kfd_exit) before a process space (mm_struct) is released. v2: Fixed potential race conditions by removing all kfd_process from the process table first, then working on releasing the resources. v3: Fixed loop element access / synchronization. Fixed extra empty lines. Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: disconnect MPCC only on OTG changeAyush Gupta
[Why] Framedrops are observed while playing Vp9 and Av1 10 bit video on 8k resolution using VSR while playback controls are disappeared/appeared [How] Now ODM 2 to 1 is disabled for 5k or greater resolutions on VSR. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Ayush Gupta <ayugupta@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: Fix DP MST sinks removal issueCruise Hung
[Why] In USB4 DP tunneling, it's possible to have this scenario that the path becomes unavailable and CM tears down the path a little bit late. So, in this case, the HPD is high but fails to read any DPCD register. That causes the link connection type to be set to sst. And not all sinks are removed behind the MST branch. [How] Restore the link connection type if it fails to read DPCD register. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: Do not set DRR on pipe CommitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/amd/display: Remove OTG DIV register write for Virtual signals.Saaem Rizvi
[WHY] Hot plugging and then hot unplugging leads to k1 and k2 values to change, as signal is detected as a virtual signal on hot unplug. Writing these values to OTG_PIXEL_RATE_DIV register might cause primary display to blank (known hw bug). [HOW] No longer write k1 and k2 values to register if signal is virtual, we have safe guards in place in the case that k1 and k2 is unassigned so that an unknown value is not written to the register either. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-15drm/i915: Don't send idle pattern after DP2.0 link trainingVille Syrjälä
Bspec calls us to select pattern 2 after link training for DP 2.0. Let's do that... by doing nothing because we will be transmitting pattern 2 at the end of the link training already. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230308212627.7601-2-ville.syrjala@linux.intel.com
2023-03-15drm/i915: Don't switch to TPS1 when disabling DP_TP_CTLVille Syrjälä
AFAICS Bspec has never asked us to switch to TPS1 when *disabling* DP_TP_CTL. Let's stop doing that in case it confuses something. We do have to switch before we *enable* DP_TP_CTL, but that is already being handled correctly. v2: Do the same for FDI v3: Rebase Reviewed-by: Imre Deak <imre.deak@intel.com> #v1 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230308212627.7601-1-ville.syrjala@linux.intel.com
2023-03-15drm/vmwgfx: Fix src/dst_pitch confusionZack Rusin
The src/dst_pitch got mixed up during the rework of the function, make sure the offset's refer to the correct one. Spotted by clang: Clang warns (or errors with CONFIG_WERROR): drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:509:29: error: variable 'dst_pitch' is uninitialized when used here [-Werror,-Wuninitialized] src_offset = ddirty->top * dst_pitch + ddirty->left * stdu->cpp; ^~~~~~~~~ drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:492:26: note: initialize the variable 'dst_pitch' to silence this warning s32 src_pitch, dst_pitch; ^ = 0 1 error generated. Signed-off-by: Zack Rusin <zackr@vmware.com> Reported-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Dave Airlie <airlied@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1811 Fixes: 39985eea5a6d ("drm/vmwgfx: Abstract placement selection") Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314211445.1363828-1-zack@kde.org
2023-03-15drm: Track clients by tgid and not tidTvrtko Ursulin
Thread group id (aka pid from userspace point of view) is a more interesting thing to show as an owner of a DRM fd, so track and show that instead of the thread id. In the next patch we will make the owner updated post file descriptor handover, which will also be tgid based to avoid ping-pong when multiple threads access the fd. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314141904.1210824-2-tvrtko.ursulin@linux.intel.com
2023-03-15drm/i915/gt: make kobj attributes constJani Nikula
There's no need for any of these to be mutable, constify: drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000020 files.0 drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000050 files.1 drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 preempt_timeout_attr drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 timeslice_duration_attr drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 timeslice_duration_def drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 preempt_timeout_def drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 max_spin_def drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 stop_timeout_def drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 heartbeat_interval_def drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 name_attr drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 class_attr drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 inst_attr drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 mmio_attr drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 caps_attr drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 all_caps_attr drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 max_spin_attr drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 stop_timeout_attr drivers/gpu/drm/i915/gt/sysfs_engines.o: .data 0000000000000038 heartbeat_interval_attr Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230309081645.385650-1-jani.nikula@intel.com
2023-03-15drm/panel: seiko-43wvf1g: Add the 'enable-gpios' propertyFabio Estevam
Sometimes a GPIO is needed to turn on/off the display. Add support for this usecase by introducing the optional 'enable-gpios' property. Tested on a imx53qsb board. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230314111724.1520178-2-festevam@denx.de
2023-03-15drm/panel: support for STARRY 2081101QFH032011-53G MIPI-DSI panelRuihai Zhou
The STARRY 2081101QFH032011-53G is a 10.1" WUXGA TFT LCD panel, which fits in nicely with the existing panel-boe-tv101wum-nl6 driver. Hence, we add a new compatible with panel specific config. Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230314090549.11418-1-zhouruihai@huaqin.corp-partner.google.com
2023-03-15drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion againMarek Szyprowski
devm_regulator_get_enable_optional() returns -ENODEV if requested optional regulator is not present. Adjust code for that, because in the 67d0a30128c9 I've incorrectly assumed that it also returns 0 when regulator is not present. Reported-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Fixes: 67d0a30128c9 ("drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230309152446.104913-1-m.szyprowski@samsung.com
2023-03-15Merge tag 'drm-intel-next-2023-03-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: - MEI patches to fix suspend/resume issues with the i915's PXP. (Alexander) Driver Changes: - Registers helpers and clean-ups. (Lucas) - PXP fixes and clean-ups. (Alan, Alexander) - CDCLK related fixes and w/a (Chaitanya, Stanislav) - Move display code to use RMW whenever possible (Andrzej) - PSR fixes (Jouni, Ville) - Implement async_flip mode per plane tracking (Andrzej) - Remove pre-production Workarounds (Matt) - HDMI related fixes (Ankit) - LVDS cleanup (Ville) - Watermark fixes and cleanups (Ville, Jani, Stanilav) - DMC code related fixes, cleanups and improvements (Jani) - Implement fb_dirty for PSR,FBC,DRRS fixes (Jouni) - Initial DSB improvements targeting LUTs loading (Ville) - HWMON related fixes (Ashutosh) - PCI ID updates (Jonathan, Matt Roper) - Fix leak in scatterlist (Matt Atwood) - Fix eDP+DSI dual panel systems (Ville) - Cast iomem to avoid sparese warnings (Jani) - Set default backlight controller index (Jani) - More MTL enabling (RK) - Conversion of display dev_priv towards i915 (Nirmoy) - Improvements in log/debug messages (Ville) - Increase slice_height for DP VDSC (Suraj) - VBT ports improvements (Ville) - Fix platforms without Display (Imre) - Other generic display code clean-ups (Ville, Jani, Rodrigo) - Add RPL-U sub platform (Chaitanya) - Add inverted backlight quirk for HP 14-r206nv (Mavroudis) - Transcoder timing improvements (Ville) - Track audio state per-transcoder (Ville) - Error/underrun interrupt fixes (Ville) - Update combo PHY init sequence (Matt Roper) - Get HDR DPCD refresh timeout (Ville) - Vblank improvements (Ville) - DSS fixes and cleanups (Jani) - PM code cleanup (Jani) - Split display parts related to RPS (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZAez4aekcob8fTeh@intel.com
2023-03-14drm/amd/display: Do not set DRR on pipe CommitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: Take FEC Overhead into Timeslot CalculationFangzhi Zuo
8b/10b encoding needs to add 3% fec overhead into the pbn. In the Synapcis Cascaded MST hub, the first stage MST branch device needs the information to determine the timeslot count for the second stage MST branch device. Missing this overhead will leads to insufficient timeslot allocation. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: Add Validate BW for USB4 LinksMustapha Ghaddar
[WHY] To validate the BW used for DPIAs per HostRouter [HOW] Add the Validate function in C source file Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: Remove OTG DIV register write for Virtual signals.Saaem Rizvi
[WHY] Hot plugging and then hot unplugging leads to k1 and k2 values to change, as signal is detected as a virtual signal on hot unplug. Writing these values to OTG_PIXEL_RATE_DIV register might cause primary display to blank (known hw bug). [HOW] No longer write k1 and k2 values to register if signal is virtual, we have safe guards in place in the case that k1 and k2 is unassigned so that an unknown value is not written to the register either. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: convert link.h functions to function pointer styleWenjing Liu
[Why & How] All dc subcomponents should call another dc component via function pointers stored in a component structure. This is part of dc coding convention since the beginning. The reason behind this is to improve encapsulation and polymorphism. The function contract is extracted into a single link service structure defined in link.h header file and implemented only in link_factory.c instead of spreading across multiple files in link component file structure. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: reset the scaler boundary modeZhikai Zhai
[WHY] The VBIOS select the black boundary mode when using auto scale mode. But it doesn't recover if there is no reset. [HOW] Clean the scaler boundary mode to default edge in the manual scale mode. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: Use DPP inst instead of pipe idx for DPP DTO programmingAlvin Lee
[Description] - For pipe harvesting cases we must use DPP inst instead of pipe index for DPP related programming Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: default values for luminance range if they are 0Swapnil Patel
[why] Currently if invalid luminescence range is reported in edid, then the driver doesn't have default range to fallback to. [How] Add default range if, the range is 0. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: Add DSC Support for Synaptics Cascaded MST HubFangzhi Zuo
Traditional synaptics hub has one MST branch device without virtual dpcd. Synaptics cascaded hub has two chained MST branch devices. DSC decoding is performed via root MST branch device, instead of the second MST branch device. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/pl111: Use GEM DMA fbdev emulationThomas Zimmermann
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Reported-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/dri-devel/CACRpkdawSQsNqKJkSSoSw3HmMHyNXFUywxkdszpTC-a_uZA+tQ@mail.gmail.com/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-26-tzimmermann@suse.de
2023-03-14drm/mcde: Use GEM DMA fbdev emulationThomas Zimmermann
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Reported-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/dri-devel/CACRpkdawSQsNqKJkSSoSw3HmMHyNXFUywxkdszpTC-a_uZA+tQ@mail.gmail.com/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-25-tzimmermann@suse.de
generated by cgit (git 2.34.1) at 2025-09-12 13:39:22 +0000