summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2023-02-14drm/amd/display: do not set RX back to SST mode for non 0 mst stream countWenjing Liu
[why] a recent regression has caused us to mistakenly switch RX back to SST mode when there are remaining mst stream enabled to the link. We are missing a condition check for stream count before setting RX back to SST mode. [how] Add stream count check condition back and do some further refactor so the logic is easier to understand to prevent future coding error in this sequence. Reviewed-by: Samson Tam <Samson.Tam@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amd/display: Fix prefetch vratio checkAlvin Lee
[Why & How] - For prefetch max vratio check, use the calculated prefetch bandwidth from dml32_CalculatePrefetchSchedule instead of max prefetch bandwidth - Also multiply prefetch bandwidth by VRatio since scaling is not considered one calculating require prefetch bw Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amd/display: Enable P-state validation checks for DCN314Nicholas Kazlauskas
[Why] To align with DCN31 behavior. This helps avoid p-state hangs in the case where underflow does occur. [How] Flip the bit to true. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amd/display: fix k1 k2 divider programming for phantom streamsAurabindo Pillai
[Why & How] When k1 and k2 divider programming logic is executed for a phantom stream, the corresponding master stream should be used for the calculation. Fix the if condition to use the master stream for checking signal type instead of the phantom stream. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amd/display: Set max vratio for prefetch to 7.9 for YUV420 MPOAlvin Lee
[Description] - Single 4K60 playing YUV420 MPO video blocks P-State because the required VRatio for prefetch is too high (luma plane for YUV420 is 1bpe, so swath height is 16 and prefetch requires more lines) - Allow max vratio per plane to be 7.9 for single display YUV420 MPO video cases - Ensure that global vratio prefetch (i.e. total prefetch BW vs. total active bandwidth) does not excited 4.0 Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amd/display: Move DCN314 DOMAIN power control to DMCUBNicholas Kazlauskas
[Why] DOMAIN power gating control is now required to be done via firmware due to interlock with other power features. This is to avoid intermittent issues in the LB memories. [How] If the firmware supports the command then use the new firmware as the sequence can avoid potential display corruption issues. The command will be ignored on firmware that does not support DOMAIN power control and the pipes will remain always on - frequent PG cycling can cause the issue to occur on the old sequence, so we should avoid it. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amd/amdgpu: implement mode2 reset on smu_v13_0_10Kenneth Feng
implement mode2 reset on smu_v13_0_10 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amdkfd: Prevent user space using both svm and kfd api to register same ↵Xiaogang Chen
user buffer When xnack is on user space can use svm page restore to set a vm range without setup it first, then use regular api to register. Currently kfd api and svm are not interoperable. We already have check on that, but for user buffer the mapping address is not same as buffer cpu virtual address. Add checking on that to avoid error propagate to hmm. Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14drm/amdgpu: Fix the warning info when unload or remove amdgpuMa Jun
Checking INVOKE_CMD to fix the below warning info when unload or remove amdgpu driver [ 319.489809] Call Trace: [ 319.489810] <TASK> [ 319.489812] psp_ta_unload+0x9a/0xd0 [amdgpu] [ 319.489926] ? smu_smc_hw_cleanup+0x2f6/0x360 [amdgpu] [ 319.490072] psp_hw_fini+0xea/0x170 [amdgpu] [ 319.490231] amdgpu_device_fini_hw+0x2fc/0x413 [amdgpu] [ 319.490398] ? blocking_notifier_chain_unregister+0x56/0xb0 [ 319.490401] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu] [ 319.490493] amdgpu_pci_remove+0x5a/0x140 [amdgpu] [ 319.490583] ? __pm_runtime_resume+0x60/0x90 [ 319.490586] pci_device_remove+0x3b/0xb0 [ 319.490588] __device_release_driver+0x1a8/0x2a0 [ 319.490591] driver_detach+0xf3/0x140 [ 319.490593] bus_remove_driver+0x6c/0xf0 [ 319.490595] driver_unregister+0x31/0x60 [ 319.490597] pci_unregister_driver+0x40/0x90 [ 319.490599] amdgpu_exit+0x15/0x44e [amdgpu] Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-14Merge 6.2-rc8 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-14drm/i915: Use encoder->devdata in eDP initVille Syrjälä
Since we now populate encoder->devdata for all DP capable platforms we can consult it directly during the eDP connector init instead of taking a detour via some global list/array. Unfortunately we can't quite get rid of intel_dp_is_port_edp() since it's still used by the higher level ilk/vlv/chv output setup code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-11-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14drm/i915: Iterate all child devs in intel_bios_is_port_present()Ville Syrjälä
Instead of consulting vbt.ports[] lets just go through the whole child device list to check whether a specific port was declared by the VBT or not. Note that this doesn't change anything wrt. detecting duplicate child devices with the same port as vbt.ports[] would also always contain exactly one of the duplicates. v2: Include a is_port_valid() check to deal with some broken VBTs Mention something about duplicate port detection (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230214073818.20231-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14drm/i915: Pass devdata to intel_bios_port_aux_ch()Ville Syrjälä
Currently intel_bios_port_aux_ch() digs out the devdata (VBT child device info) from the vbt.ports[] array. We need to get rid of that, so just pass in the correct encoder->devdata (now that we have it also for g4x+ ports) directly. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14drm/i915: Populate encoder->devdata for g4x+ DP/HDMI portsVille Syrjälä
Let's make encoder->devdata (the VBT information for the port) available on g4x+ platforms as well. Much easier when you can just grab it there instead of trying to find it from some global list array based on the port. Note that (unlike DDI platforms) we don't currently require that each DP/HDMI port is actually declared in VBT. Perhaps in the future we may want to rethink that, but for now just stick in a debug+FIXME as a reminder. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14drm/i915: Consult the registered encoders for the ICL combo PHY w/aVille Syrjälä
Display WA #1178 calls us to tweak some magic bits when doing AUX to an external combo PHY port. Instead of looking to see if the VBT has declared such a port (which could in theory even alias with a declared eDP port on the same PHY) just check the real situation based on the registered encoders. The only slight chicken vs. egg situation here is during output probing. But typically we'd register the eDP ports first and so once we get to probe anything external on the combo PHY we have already determined if it's eDP or not. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14drm/i915: Replace intel_bios_is_port_hpd_inverted() with ↵Ville Syrjälä
intel_bios_encoder_hpd_invert() intel_bios_is_port_hpd_inverted() is only used on bxt/glk on which we always have encoder->devdata available. So consult that instead of digging around in vbt.ports[]. And rename the function to match the common pattern. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14drm/i915: Replace intel_bios_is_lane_reversal_needed() with ↵Ville Syrjälä
intel_bios_encoder_lane_reversal() The sole user of intel_bios_is_lane_reversal_needed() has the devdata already located, so pass it in directly instead of digging it again from vbt.ports[]. And rename the function to follow the common pattern for these things. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14drm/i915: Replace intel_bios_is_lspcon_present() with ↵Ville Syrjälä
intel_bios_encoder_is_lspcon() We always have encoder->devdata available on the platforms that can have LSPCON. So let's start looking there instead of digging it out from vbt.ports[]. And let's rename the function to fit the common pattern for these things. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14drm/i915: Move variables to loop contextVille Syrjälä
Lot of the loops over VBT child devices have variables declared outside the loop but only used inside the loop. Move the variables to a tighter scope. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14drm/i915: Pass the whole encoder to hotplug_enables()Ville Syrjälä
bxt_hotplug_enables() needs to dig out not only the hpd_pin but also the VBT child device info, so let's just pass in the whole encoder to avoid having to look things up multiple times. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-14drm/i915/dp: Increase slice_height for DPSuraj Kandpal
According VDSC spec 1.2a Section 3.8 Options for Slice implies that 108 lines is an optimal slice height, but any size can be used as long as vertical active integer multiple and maximum vertical slice count requirements are met. Bspec: 49259 --v3 -remove previous fallback code and return slice_height as 2 [Jani] Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Swati Sharma <swati2.sharma@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230214052017.3312044-1-suraj.kandpal@intel.com
2023-02-13drm/vmwgfx: Make the driver work without the dummy resourcesZack Rusin
In commit 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation") ttm stopped allocating dummy resources but vmwgfx was never ported to handle it. Make the driver treat null resources as initial creation and port code to handle null resources in general. Fixes kernel oops'es on boot with vmwgfx. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation") Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230210023437.2214816-1-zack@kde.org
2023-02-13drm/vmwgfx: Stop using raw ttm_buffer_object'sZack Rusin
Various bits of the driver used raw ttm_buffer_object instead of the driver specific vmw_bo object. All those places used to duplicate the mapped bo caching policy of vmw_bo. Instead of duplicating all of that code and special casing various functions to work both with vmw_bo and raw ttm_buffer_object's unify the buffer object handling code. As part of that work fix the naming of bo's, e.g. insted of generic backup use 'guest_memory' because that's what it really is. All of it makes the driver easier to maintain and the code easier to read. Saves 100+ loc as well. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-9-zack@kde.org
2023-02-13drm/vmwgfx: Abstract placement selectionZack Rusin
Problem with explicit placement selection in vmwgfx is that by the time the buffer object needs to be validated the information about which placement was supposed to be used is lost. To workaround this the driver had a bunch of state in various places e.g. as_mob or cpu_blit to somehow convey the information on which placement was intended. Fix it properly by allowing the buffer objects to hold their preferred placement so it can be reused whenever needed. This makes the entire validation pipeline a lot easier both to understand and maintain. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-8-zack@kde.org
2023-02-13drm/vmwgfx: Rename dummy to is_iomemZack Rusin
Rename dummy to is_iomem because that's what it is even if we're not activelly using it. Makes the code easier to read. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-7-zack@kde.org
2023-02-13drm/vmwgfx: Cleanup the vmw bo usage in the cursor pathsZack Rusin
Base mapped count is useless because the ttm unmap functions handle null maps just fine so completely remove all the code related to it. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-6-zack@kde.org
2023-02-13drm/vmwgfx: Simplify fb pinningZack Rusin
Only the legacy display unit requires pinning of the fb memory in vram. Both the screen objects and screen targets can present from any buffer. That makes the pinning abstraction pointless. Simplify all of the code and move it to the legacy display unit, the only place that needs it. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-5-zack@kde.org
2023-02-13drm/vmwgfx: Rename vmw_buffer_object to vmw_boZack Rusin
The rest of the drivers which are using ttm have mostly standardized on driver_prefix_bo as the name for subclasses of the TTM buffer object. Make vmwgfx match the rest of the drivers and follow the same naming semantics. This is especially clear given that the name of the file in which the object was defined is vmw_bo.c. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-4-zack@kde.org
2023-02-13drm/vmwgfx: Remove the duplicate bo_free functionZack Rusin
Remove the explicit bo_free parameter which was switching between vmw_bo_bo_free and vmw_gem_destroy which had exactly the same implementation. It makes no sense to keep parameter which is always the same, remove it and all code referencing it. Instead use the vmw_bo_bo_free directly. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-3-zack@kde.org
2023-02-13drm/vmwgfx: Use the common gem mmap instead of the custom codeZack Rusin
Before vmwgfx supported gem it needed to implement the entire mmap logic explicitly. With GEM support that's not needed and the generic code can be used by simply setting the vm_ops to vmwgfx specific ones on the gem object itself. Removes a lot of code from vmwgfx without any functional difference. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-2-zack@kde.org
2023-02-13drm/i915/dp_mst: Fix payload removal during output disablingImre Deak
Use the correct old/new topology and payload states in intel_mst_disable_dp(). So far drm_atomic_get_mst_topology_state() it used returned either the old state, in case the state was added already earlier during the atomic check phase or otherwise the new state (but the latter could fail, which can't be handled in the enable/disable hooks). After the first patch in the patchset, the state should always get added already during the check phase, so here we can get the old/new states without a failure. drm_dp_remove_payload() should use time_slots from the old payload state and vc_start_slot in the new one. It should update the new payload states to reflect the sink's current payload table after the payload is removed. Pass the new topology state and the old and new payload states accordingly. This also fixes a problem where the payload allocations for multiple MST streams on the same link got inconsistent after a few commits, as during payload removal the old instead of the new payload state got updated, so the subsequent enabling sequence and commits used a stale payload state. v2: Constify the old payload state pointer. (Ville) Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org # 6.1 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-4-imre.deak@intel.com
2023-02-13drm/display/dp_mst: Add drm_atomic_get_old_mst_topology_state()Imre Deak
Add a function to get the old MST topology state, required by a follow-up i915 patch. While at it clarify the code comment of drm_atomic_get_new_mst_topology_state() and add _new prefix to the new state pointer to remind about its difference from the old state. v2: Use old_/new_ prefixes for the state pointers. (Ville) Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org # 6.1 Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-3-imre.deak@intel.com
2023-02-13drm/display/dp_mst: Handle old/new payload states in drm_dp_remove_payload()Imre Deak
Atm, drm_dp_remove_payload() uses the same payload state to both get the vc_start_slot required for the payload removal DPCD message and to deduct time_slots from vc_start_slot of all payloads after the one being removed. The above isn't always correct, as vc_start_slot must be the up-to-date version contained in the new payload state, but time_slots must be the one used when the payload was previously added, contained in the old payload state. The new payload's time_slots can change vs. the old one if the current atomic commit changes the corresponding mode. This patch let's drivers pass the old and new payload states to drm_dp_remove_payload(), but keeps these the same for now in all drivers not to change the behavior. A follow-up i915 patch will pass in that driver the correct old and new states to the function. Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: stable@vger.kernel.org # 6.1 Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-2-imre.deak@intel.com
2023-02-13drm/i915/dp_mst: Add the MST topology state for modesetted CRTCsImre Deak
Add the MST topology for a CRTC to the atomic state if the driver needs to force a modeset on the CRTC after the encoder compute config functions are called. Later the MST encoder's disable hook also adds the state, but that isn't guaranteed to work (since in that hook getting the state may fail, which can't be handled there). This should fix that, while a later patch fixes the use of the MST state in the disable hook. v2: Add missing forward struct declartions, caught by hdrtest. v3: Factor out intel_dp_mst_add_topology_state_for_connector() used later in the patchset. Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org # 6.1 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v2 Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Acked-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-1-imre.deak@intel.com
2023-02-13drm: Disable dynamic debug as brokenVille Syrjälä
CONFIG_DRM_USE_DYNAMIC_DEBUG breaks debug prints for (at least modular) drm drivers. The debug prints can be reinstated by manually frobbing /sys/module/drm/parameters/debug after the fact, but at that point the damage is done and all debugs from driver probe are lost. This makes drivers totally undebuggable. There's a more complete fix in progress [1], with further details, but we need this fixed in stable kernels. Mark the feature as broken and disable it by default, with hopes distros follow suit and disable it as well. [1] https://lore.kernel.org/r/20230125203743.564009-1-jim.cromie@gmail.com Fixes: 84ec67288c10 ("drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro") Cc: Jim Cromie <jim.cromie@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.1+ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230207143337.2126678-1-jani.nikula@intel.com
2023-02-13Merge tag 'qcom-drivers-for-6.3-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers More Qualcomm driver updates for 6.3 The qcom_scm.h file is moved into firmware/qcom, to avoid having any Qualcomm-specific files directly in include/linux. Support for PMIC GLINK is introduced, which on newer Qualcomm platforms provides an interface to the firmware implementing battery management and USB Type-C handling. Together with the base driver comes the custom altmode support driver. SMD RPM gains support for IPQ9574, and socinfo is extended with support for revision 17 of the information format and soc_id for IPQ5332 and IPQ8064 are added. The qcom_stats is changes not to fail when not all parts are initialized. * tag 'qcom-drivers-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support soc: qcom: pmic_glink: Introduce base PMIC GLINK driver dt-bindings: soc: qcom: Introduce PMIC GLINK binding soc: qcom: dcc: Drop driver for now Link: https://lore.kernel.org/r/20230210182242.2023901-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-10drm/i915/xehp: LNCF/LBCF workarounds should be on the GT listMatt Roper
Although registers in the L3 bank/node configuration ranges are marked as having "DEV" reset characteristics in the bspec, this appears to be a hold-over from pre-Xe_HP platforms. In reality, these registers maintain their values across engine resets, meaning that workarounds and tuning settings targeting them should be placed on the GT workaround list rather than an engine workaround list. Note that an extra clue here is that these registers moved from the RENDER forcewake domain to the GT forcewake domain in Xe_HP; generally RCS/CCS engine resets should not lead to the reset of a register that lives outside the RENDER domain. Re-applying these registers on engine resets wouldn't actually hurt anything, but is unnecessary and just makes it more confusing to anyone trying to decipher how these registers really work. v2: - Also move DG2's Wa_14010648519 to the GT list. (Gustavo) Cc: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209232228.859317-1-matthew.d.roper@intel.com
2023-02-10drm/i915: Prefix hex numbers with 0xVille Syrjälä
It's hard to figure out whether the number is hex or decimal if doesn't have the 0x to indicate hex. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130181701.29977-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-10drm/i915: Include stepping information in device info dumpVille Syrjälä
Dump the stepping information alongside all the other device info. Might avoid some guesswork when reading logs. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130181701.29977-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-10drm/i915/display: Pass drm_i915_private as param to i915 funcsNirmoy Das
For i915 functions pass struct drm_i915_private directly instead of struct drm_device. v2: Use to_i915(dev) directly without alias(Andrzej). Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125095603.17845-1-nirmoy.das@intel.com
2023-02-10drm/ast: Fix start address computationJocelyn Falempe
During the driver conversion to shmem, the start address for the scanout buffer was set to the base PCI address. In most cases it works because only the lower 24bits are used, and due to alignment it was almost always 0. But on some unlucky hardware, it's not the case, and some uninitialized memory is displayed on the BMC. With shmem, the primary plane is always at offset 0 in GPU memory. * v2: rewrite the patch to set the offset to 0. (Thomas Zimmermann) * v3: move the change to plane_init() and also fix the cursor plane. (Jammy Huang) Tested on a sr645 affected by this bug. Fixes: f2fa5a99ca81 ("drm/ast: Convert ast to SHMEM") Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jammy Huang <jammy_huang@aspeedtech.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209094417.21630-1-jfalempe@redhat.com
2023-02-10drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()Asahi Lina
Other functions touching shmem->sgt take the pages lock, so do that here too. drm_gem_shmem_get_pages() & co take the same lock, so move to the _locked() variants to avoid recursive locking. Discovered while auditing locking to write the Rust abstractions. Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages") Signed-off-by: Asahi Lina <lina@asahilina.net> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net
2023-02-10drm/vgem: add missing mutex_destroyMaíra Canal
vgem_fence_open() instantiates a mutex for a particular fence instance, but never destroys it by calling mutex_destroy() in vgem_fence_close(). So, add the missing mutex_destroy() to guarantee proper resource destruction. Fixes: 407779848445 ("drm/vgem: Attach sw fences to exported vGEM dma-buf (ioctl)") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230202125517.427976-1-mcanal@igalia.com
2023-02-10drm: remove dumb_destroy callbackChristian König
Not used by any driver any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230126102814.8722-2-christian.koenig@amd.com
2023-02-10drm/i915: Replace wm.max_levels with wm.num_levels and use it everywhereVille Syrjälä
Replaces wm.max_level with wm.num_levels, since that generally results in nicer looking code (for-loops can be in standard form etc.). Also get rid of the two different wrappers we have for this (ilk_wm_max_level() and intel_wm_num_levels()). They don't really do anything for us other than potentially slow things down if the compiler actually emits the function calls every time (num_planes*num_wm_levels*higher_level_wm_function_calls could be a big number). The watermark code already shows up far too prominently in cpu profiles. Though I must admit that I didn't look at the generated code this time. v2: Fix the ilk_wm_merge() off-by-one (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209222504.31478-1-ville.syrjala@linux.intel.com
2023-02-10drm/i915: Populate wm.max_level for everyoneVille Syrjälä
Switch ilk+ and skl+ platforms to also setting up wm.max_level and remove a bunch of if ladders as a result. There will be a tiny change in the debugfs on CHV machines that have DVFS disabled in the BIOS. Presviously debugfs would show the latency for the DVFS level as well, but that will no longer be the case. Which is arguably better as that number is absolutely meaningless when DVFS can't be enabled anyway. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209003251.32021-1-ville.syrjala@linux.intel.com
2023-02-09mm: replace vma->vm_flags direct modifications with modifier callsSuren Baghdasaryan
Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-10Merge tag 'amd-drm-fixes-6.2-2023-02-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.2-2023-02-09: amdgpu: - Add a parameter to disable S/G display - Re-enable S/G display on all DCNs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209174504.7577-1-alexander.deucher@amd.com
2023-02-10Merge tag 'drm-intel-fixes-2023-02-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Display watermark fix (Ville) - fbdev fix for PSR, FBC, DRRS (Jouni) - Move fd_install after last use of fence (Rob) - Initialize the obj flags for shmem objects (Aravind) - Fix VBT DSI DVO port handling (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y+UZ0rh2YlhTrE4t@intel.com
2023-02-10Merge tag 'drm-misc-fixes-2023-02-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A fix for a circular refcounting in drm/client, one for a memory leak in amdgpu and a virtio fence fix when interrupted Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230209083600.7hi6roht6xxgldgz@houat
generated by cgit (git 2.34.1) at 2025-09-16 09:08:18 +0000