summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2021-10-06drm/i915: Pimp link training debug printsVille Syrjälä
Unify all debug prints during link training to include information on both the encoder and the LTTPR. We unify the format to something like "[ENCODER:1:FOO][LTTPR 1] Something something". Though not sure if those brackets around the dp_phy just make it look like line noise? I'll accept suggestions on better formatting. I'm slightly on the fence about also including the connector, but technically only the DPRX is the SST connector (ie. intel_dp->attached_connector). I suppose you could think of it as the branch device/whatever in the topology, and we're training the link leading to it. So that could argue for its inclusion. But it's all getting a bit long alrady, so not going to do it I think. v2: Keep the connector name in the final passed/failed debug print Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211004170535.4173-5-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2021-10-06drm/i915: Print the DP vswing adjustment requestVille Syrjälä
Print out each DP vswing adjustment request we got from the RX. Could help in diagnosing what's going on during link training. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211004170535.4173-4-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2021-10-06drm/i915: Show LTTPR in the TPS debug printVille Syrjälä
Indicate which LTTPR we're currently attempting to train when we print which training pattern we're using. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211004170535.4173-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2021-10-06drm/i915: Tweak the DP "max vswing reached?" conditionVille Syrjälä
Currently we consider the max vswing reached when we transmit a the max voltage level, but we don't consider pre-emphasis at all. This kinda matches older DP specs that only had some vague text about transmitting the maximum voltage swing. Latest versions now say something vague about consider the sum of the vswing and pre-emphasis fields in the ADJUST_REQUEST_LANE registers. Very vague, and super confusing especially the fact that it talks about transmitted voltgage swing in the same sentence as it say to look at the requested values. Also glanced at the link CTS spec, and that one seems to have tests that assume contradicting behaviour. Some say to consider just the vswing level we transmit, others say to check for sum of transmitted vswing+preemph being 3. So let's try to take some kind of sane middle ground here. I think what could make sense is only consider max vswing reached if MAX_SWING_REACHED==1 _and_ vswing+preemph==3. That will allow things to go all the way up to vswing 3 + pre-emph 0 or vswing 2 + pre-emph 1, depending on what the maximum supported vswing is. Only considering the sum of vswing+pre-emph doesn't make much sense to me since we could terminate too early if the sink requests eg. vswing 0 + pre-emph 3. And if we'd stick to the current code we could terminate too early of the sink asks for vswing 2 + pre-emph 0 when vswing level 3 is not supported. Side note: I don't really understand why any of this stuff is "specified" at all. There is already a limit of 5 attempts at the same vswing+pre-emph level, and a total limit of 10 attempts. So might as well stick to the same max 5 attempts across the board IMO. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211004170535.4173-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2021-10-06drm/bridge/lontium-lt9611uxc: fix provided connector suportDmitry Baryshkov
- set DRM_CONNECTOR_POLL_HPD as the connector will generate hotplug events on its own - do not call drm_kms_helper_hotplug_event() unless mode_config.funcs pointer is not NULL to remove possible kernel oops. Fixes: bc6fa8676ebb ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210708230329.395976-1-dmitry.baryshkov@linaro.org
2021-10-06drm/bridge: dw-hdmi-cec: Make use of the helper function ↵Cai Huoqing
devm_add_action_or_reset() The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210922125909.215-1-caihuoqing@baidu.com
2021-10-06drm/nouveau/debugfs: fix file release memory leakYang Yingliang
When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. Fixes: 6e9fc177399f ("drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-2-yangyingliang@huawei.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06drm/nouveau/kms/nv50-: fix file release memory leakYang Yingliang
When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. Fixes: 12885ecbfe62 ("drm/nouveau/kms/nvd9-: Add CRC support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-1-yangyingliang@huawei.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06drm/nouveau: avoid a use-after-free when BO init failsJeremy Cline
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code back to the caller. On failures, ttm_bo_init() invokes the provided destructor which should de-initialize and free the memory. Thus, when nouveau_bo_init() returns an error the gem object has already been released and the memory freed by nouveau_bo_del_ttm(). Fixes: 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object") Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201203000220.18238-1-jcline@redhat.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06drm/panel: abt-y030xx067a: yellow tint fixChristophe Branchereau
The previous parameters caused an unbalanced yellow tint. Fixes: 7467389bdafb ("drm/panel: Add ABT Y030XX067A 3.0" 320x480 panel") Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> [Paul: Add Fixes: tag, and fix case and punctuation in commit message] Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210914092716.2370039-1-cbranchereau@gmail.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06drm/nouveau/fifo/ga102: initialise chid on return from channel creationBen Skeggs
Turns out caller isn't zero-initialised after-all. Fixes: 49b2dfc08182 ("drm/nouveau/ga102-: support ttm buffer moves via copy engine") Reported-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210921090735.247236-1-skeggsb@gmail.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06drm/rockchip: Update crtc fixup to account for fractional clk changeChris Morgan
After commit 928f9e268611 ("clk: fractional-divider: Hide clk_fractional_divider_ops from wide audience") was merged it appears that the DSI panel on my Odroid Go Advance stopped working. Upon closer examination of the problem, it looks like it was the fixup in the rockchip_drm_vop.c file was causing the issue. The changes made to the clk driver appear to change some assumptions made in the fixup. After debugging the working 5.14 kernel and the no-longer working 5.15 kernel, it looks like this was broken all along but still worked, whereas after the fractional clock change it stopped working despite the issue (it went from sort-of broken to very broken). In the 5.14 kernel the dclk_vopb_frac was being requested to be set to 17000999 on my board. The clock driver was taking the value of the parent clock and attempting to divide the requested value from it (17000000/17000999 = 0), then subtracting 1 from it (making it -1), and running it through fls_long to get 64. It would then subtract the value of fd->mwidth from it to get 48, and then bit shift 17000999 to the left by 48, coming up with a very large number of 7649082492112076800. This resulted in a numerator of 65535 and a denominator of 1 from the clk driver. The driver seemingly would try again and get a correct 1:1 value later, and then move on. Output from my 5.14 kernel (with some printfs for good measure): [ 2.830066] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops) [ 2.839431] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops) [ 2.855980] Clock is dclk_vopb_frac [ 2.856004] Scale 64, Rate 7649082492112076800, Oldrate 17000999, Parent Rate 17000000, Best Numerator 65535, Best Denominator 1, fd->mwidth 16 [ 2.903529] Clock is dclk_vopb_frac [ 2.903556] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16 [ 2.903579] Clock is dclk_vopb_frac [ 2.903583] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16 Contrast this with 5.15 after the clk change where the rate of 17000999 was getting passed and resulted in numerators/denomiators of 17001/ 17000. Output from my 5.15 kernel (with some printfs added for good measure): [ 2.817571] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops) [ 2.826975] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops) [ 2.843430] Rate 17000999, Parent Rate 17000000, Best Numerator 17018, Best Denominator 17017 [ 2.891073] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 [ 2.891269] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 [ 2.891281] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 I have tested the change extensively on my Odroid Go Advance (Rockchip RK3326) and it appears to work well. However, this change will affect all Rockchip SoCs that use this driver so I believe further testing is warranted. Please note that without this change I can confirm at least all PX30s with DSI panels will stop working with the 5.15 kernel. Upon advice from Doug Anderson <dianders@chromium.org> it was decided that we would first check if the clock rate can be set exactly as requested, and only if it could not would we then add 999 to it and attempt the process again. This way we can preserve the behavior for clocks that still need it while resolving the specific issue for the PX30 and DSI panels (since it is using a fractional clock). Changes since v2: - Moved fixes to correct location. Changes since v1: - Made the addition of 999 conditional based on whether the clock subsystem can set the actual clock rate as requested. - Updated the notes in the fixup routine to reflect this new behavior. - Added reference to original commit, as this has technically been broken since then however only now is it an issue due to the clock changes. Fixes: 4e7cf74fa3b2 ("clk: fractional-divider: Export approximation algorithm to the CCF users") Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210916202907.18394-1-macroalpha82@gmail.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06drm/nouveau/ga102-: support ttm buffer moves via copy engineBen Skeggs
We don't currently have any kind of real acceleration on Ampere GPUs, but the TTM memcpy() fallback paths aren't really designed to handle copies between different devices, such as on Optimus systems, and result in a kernel OOPS. A few options were investigated to try and fix this, but didn't work out, and likely would have resulted in a very unpleasant experience for users anyway. This commit adds just enough support for setting up a single channel connected to a copy engine, which the kernel can use to accelerate the buffer copies between devices. Userspace has no access to this incomplete channel support, but it's suitable for TTM's needs. A more complete implementation of host(fifo) for Ampere GPUs is in the works, but the required changes are far too invasive that they would be unsuitable to backport to fix this issue on current kernels. v2: fix GPFIFO length in RAMFC (reported by Karol) Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: <stable@vger.kernel.org> # v5.12+ Reviewed-by: Karol Herbst <kherbst@redhat.com> Tested-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210916220406.666454-1-skeggsb@gmail.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windowsBen Skeggs
Prevent NVD core channel error code 67 occuring and hanging display, managed to reproduce on GA102 while testing suspend/resume scenarios. Required extension of earlier commit to fix interactions with EFI. Fixes: e78b1b545c6c ("drm/nouveau/kms/nv50: workaround EFI GOP window channel format differences") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: <stable@vger.kernel.org> # v5.12+ Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210906005628.11499-2-skeggsb@gmail.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06drm/sun4i: dw-hdmi: Fix HDMI PHY clock setupJernej Skrabec
Recent rework, which made HDMI PHY driver a platform device, inadvertely reversed clock setup order. HW is very touchy about it. Proper way is to handle controllers resets and clocks first and HDMI PHYs second. Currently, without this fix, first mode set completely fails (nothing on HDMI monitor) on H3 era PHYs. On H6, it still somehow work. Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which will assure that code is executed after controllers reset & clocks are handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit them at controllers driver unload. Tested on A64, H3, H6 and R40. Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210915175836.3158839-1-jernej.skrabec@gmail.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06drm/vc4: hdmi: Remove unused structMaxime Ripard
Commitc7d30623540b ("drm/vc4: hdmi: Remove unused struct") removed the references to the vc4_hdmi_audio_widgets and vc4_hdmi_audio_routes structures, but not the structures themselves resulting in two warnings. Remove it. Fixes: c7d30623540b ("drm/vc4: hdmi: Remove unused struct") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210819140753.930751-1-maxime@cerno.tech Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06drm/kmb: Enable alpha blended second planeEdmund Dea
Enable one additional plane that is alpha blended on top of the primary plane. This also fixes the below warnings when building with -Warray-bounds: drivers/gpu/drm/kmb/kmb_plane.c:135:20: warning: array subscript 3 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] drivers/gpu/drm/kmb/kmb_plane.c:132:20: warning: array subscript 2 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] drivers/gpu/drm/kmb/kmb_plane.c:129:20: warning: array subscript 1 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] v2: corrected previous patch dependecies so it builds Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.kernel.org/project/dri-devel/patch/20210728003126.1425028-13-anitha.chrisanthus@intel.com/ Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-10-06drm/i915: Handle Intel igfx + Intel dgfx hybrid graphics setupTvrtko Ursulin
In short this makes i915 work for hybrid setups (DRI_PRIME=1 with Mesa) when rendering is done on Intel dgfx and scanout/composition on Intel igfx. Before this patch the driver was not quite ready for that setup, mainly because it was able to emit a semaphore wait between the two GPUs, which results in deadlocks because semaphore target location in HWSP is neither shared between the two, nor mapped in both GGTT spaces. To fix it the patch adds an additional check to a couple of relevant code paths in order to prevent using semaphores for inter-engine synchronisation when relevant objects are not in the same GGTT space. v2: * Avoid adding rq->i915. (Chris) v3: * Use GGTT which describes the limit more precisely. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211005113135.768295-1-tvrtko.ursulin@linux.intel.com
2021-10-05drm/edid: Fix crash with zero/invalid EDIDDouglas Anderson
In the commit bac9c2948224 ("drm/edid: Break out reading block 0 of the EDID") I broke out reading the base block of the EDID to its own function. Unfortunately, when I did that I messed up the handling when drm_edid_is_zero() indicated that we had an EDID that was all 0x00 or when we went through 4 loops and didn't get a valid EDID. Specifically I needed to pass the broken EDID to connector_bad_edid() but now I was passing an error-pointer. Let's re-jigger things so we can pass the bad EDID in properly. Fixes: bac9c2948224 ("drm/edid: Break out reading block 0 of the EDID") Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patchwork.freedesktop.org/patch/msgid/20211004092100.1.Ic90a5ebd44c75db963112be167a03cc96f9fb249@changeid
2021-10-05drm/i915/tc: Delete bogus NULL check in intel_ddi_encoder_destroy()Dan Carpenter
The "digi_port" pointer can't be NULL and we have already dereferenced it so checking for NULL is not necessary. Delete the check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211004103737.GC25015@kili
2021-10-05drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resumeGuchun Chen
In current code, when a PCI error state pci_channel_io_normal is detectd, it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI driver will continue the execution of PCI resume callback report_resume by pci_walk_bridge, and the callback will go into amdgpu_pci_resume finally, where write lock is releasd unconditionally without acquiring such lock first. In this case, a deadlock will happen when other threads start to acquire the read lock. To fix this, add a member in amdgpu_device strucutre to cache pci_channel_state, and only continue the execution in amdgpu_pci_resume when it's pci_channel_io_frozen. Fixes: c9a6b82f45e2 ("drm/amdgpu: Implement DPC recovery") Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amdgpu: init iommu after amdkfd device initYifan Zhang
This patch is to fix clinfo failure in Raven/Picasso: Number of platforms: 1 Platform Profile: FULL_PROFILE Platform Version: OpenCL 2.2 AMD-APP (3364.0) Platform Name: AMD Accelerated Parallel Processing Platform Vendor: Advanced Micro Devices, Inc. Platform Extensions: cl_khr_icd cl_amd_event_callback Platform Name: AMD Accelerated Parallel Processing Number of devices: 0 Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amdkfd: remove redundant iommu cleanup codeYifan Zhang
kfd_resume doesn't involve iommu operation, remove redundant iommu cleanup code. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resumeGuchun Chen
In current code, when a PCI error state pci_channel_io_normal is detectd, it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI driver will continue the execution of PCI resume callback report_resume by pci_walk_bridge, and the callback will go into amdgpu_pci_resume finally, where write lock is releasd unconditionally without acquiring such lock first. In this case, a deadlock will happen when other threads start to acquire the read lock. To fix this, add a member in amdgpu_device strucutre to cache pci_channel_state, and only continue the execution in amdgpu_pci_resume when it's pci_channel_io_frozen. Fixes: c9a6b82f45e2 ("drm/amdgpu: Implement DPC recovery") Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amdgpu: print warning and taint kernel if lockup timeout is disabledChristian König
Make sure that we notice this in error reports. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amdgpu: revert "Add autodump debugfs node for gpu reset v8"Christian König
This reverts commit 728e7e0cd61899208e924472b9e641dbeb0775c4. Further discussion reveals that this feature is severely broken and needs to be reverted ASAP. GPU reset can never be delayed by userspace even for debugging or otherwise we can run into in kernel deadlocks. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amdgpu: init iommu after amdkfd device initYifan Zhang
This patch is to fix clinfo failure in Raven/Picasso: Number of platforms: 1 Platform Profile: FULL_PROFILE Platform Version: OpenCL 2.2 AMD-APP (3364.0) Platform Name: AMD Accelerated Parallel Processing Platform Vendor: Advanced Micro Devices, Inc. Platform Extensions: cl_khr_icd cl_amd_event_callback Platform Name: AMD Accelerated Parallel Processing Number of devices: 0 Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amdkfd: remove redundant iommu cleanup codeYifan Zhang
kfd_resume doesn't involve iommu operation, remove redundant iommu cleanup code. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amdgpu/display: fix dependencies for DRM_AMD_DC_SIAlex Deucher
Depends on DRM_AMDGPU_SI and DRM_AMD_DC Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amdgpu: During s0ix don't wait to signal GFXOFFLijo Lazar
In the rare event when GFX IP suspend coincides with a s0ix entry, don't schedule a delayed work, instead signal PMFW immediately to allow GFXOFF entry. GFXOFF is a prerequisite for s0ix entry. PMFW needs to be signaled about GFXOFF status before amd-pmc module passes OS HINT to PMFW telling that everything is ready for a safe s0ix entry. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1712 Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Limonciello <mario.limonciell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-05drm/amdkfd: fix a potential ttm->sg memory leakLang Yu
Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr, but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it! Fixes: 264fb4d332f5 ("drm/amdgpu: Add multi-GPU DMA mapping helpers") Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amd/display: USB4 bring up set correct addressJude Shih
[Why] YELLOW_CARP_B0 address was not correct [How] Set YELLOW_CARP_B0 to 0x1A. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Jude Shih <shenshih@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-05drm/amd/display: Fix DCN3 B0 DP Alt MappingLiu, Zhan
[Why] DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG. [How] Fix DIG mapping. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit 4b7786d87fb3adf3e534c4f1e4f824d8700b786b)
2021-10-05drm/amd/display: Fix B0 USB-C DP Alt modeLiu, Zhan
[Why] Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used. [How] Make sure RDPCSPIPE registers are programmed correctly. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit bdd1a21b52557ea8f61d0a5dc2f77151b576eb70)
2021-10-05drm/i915: Fix bug in user proto-context creation that leaked contextsMatthew Brost
Set number of engines before attempting to create contexts so the function free_engines can clean up properly. Also check return of alloc_engines for NULL. v2: (Tvrtko) - Send as stand alone patch (John Harrison) - Check for alloc_engines returning NULL v3: (Checkpatch / Tvrtko) - Remove braces around single line if statement Cc: Jason Ekstrand <jason@jlekstrand.net> Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)") Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211001155825.6762-1-matthew.brost@intel.com
2021-10-05drm/i915: Extend the async flip VT-d w/a to skl/bxtVille Syrjälä
Looks like skl/bxt/derivatives also need the plane stride stretch w/a when using async flips and VT-d is enabled, or else we get corruption on screen. To my surprise this was even documented in bspec, but only as a note on the CHICHKEN_PIPESL register description rather than on the w/a list. So very much the same thing as on HSW/BDW, except the bits moved yet again. Cc: stable@vger.kernel.org Cc: Karthik B S <karthik.b.s@intel.com> Fixes: 55ea1cb178ef ("drm/i915: Enable async flips in i915") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210930190943.17547-1-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit d08df3b0bdb25546e86dc9a6c4e3ec0c43832299) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-05drm/i915/bdb: Fix version checkLukasz Majczak
With patch "drm/i915/vbt: Fix backlight parsing for VBT 234+" the size of bdb_lfp_backlight_data structure has been increased, causing if-statement in the parse_lfp_backlight function that comapres this structure size to the one retrieved from BDB, always to fail for older revisions. This patch calculates expected size of the structure for a given BDB version and compares it with the value gathered from BDB. Tested on Chromebook Pixelbook (Nocturne) (reports bdb->version = 221) Fixes: d381baad29b4 ("drm/i915/vbt: Fix backlight parsing for VBT 234+") Tested-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Majczak <lma@semihalf.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210930134606.227234-1-lma@semihalf.com (cherry picked from commit 4378daf5d04eed59724e6d0e74755e17dce2e105) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-05drm/i915/tc: Fix TypeC port init/resume time sanitizationImre Deak
Atm during driver loading and system resume TypeC ports are accessed before their HW/SW state is synced. Move the TypeC port sanitization to the encoder's sync_state hook to fix this. v2: Handle the encoder disabled case in gen11_dsi_sync_state() as well (Jose, Jani) Fixes: f9e76a6e68d3 ("drm/i915: Add an encoder hook to sanitize its state during init/resume") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-1-imre.deak@intel.com (cherry picked from commit 7194dc998dfffca096c30b3cd39625158608992d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-05drm/i915: Fix runtime pm handling in i915_gem_shrinkMaarten Lankhorst
We forgot to call intel_runtime_pm_put on error, fix it! Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: cf41a8f1dc1e ("drm/i915: Finally remove obj->mm.lock.") Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v5.13+ Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210830121006.2978297-9-maarten.lankhorst@linux.intel.com (cherry picked from commit 239f3c2ee18376587026efecaea5250fa5926d20) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-05drm/i915/audio: Use BIOS provided value for RKL HDA linkKai-Heng Feng
Commit 989634fb49ad ("drm/i915/audio: set HDA link parameters in driver") makes HDMI audio on Lenovo P350 disappear. So in addition to TGL, extend the logic to RKL to use BIOS provided value to fix the regression. Fixes: 989634fb49ad ("drm/i915/audio: set HDA link parameters in driver") Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210906041300.508458-1-kai.heng.feng@canonical.com (cherry picked from commit c6b40ee330fe09b332715bb7ec1467e4fcbe2e65) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-10-04drm/amdgpu/display: fix dependencies for DRM_AMD_DC_SIAlex Deucher
Depends on DRM_AMDGPU_SI and DRM_AMD_DC Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu/gmc9: convert to IP version checkingAlex Deucher
Use IP versions rather than asic_type to differentiate IP version specific features. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amd/display: Prevent using DMUB rptr that is out-of-boundsWyatt Wood
[Why] Running into bugchecks during stress test where rptr is 0xFFFFFFFF. Typically this is caused by a hard hang, and can come from HW outside of DCN. [How] To prevent bugchecks when writing the DMUB rptr, fist check that the rptr is valid. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu/display: fold DRM_AMD_DC_DCN201 into DRM_AMD_DC_DCNAlex Deucher
No need for a separate kconfig option at this point. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu: remove some repeated includingsGuo Zhengkui
Remove two repeated includings in line 46 and 47. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu: During s0ix don't wait to signal GFXOFFLijo Lazar
In the rare event when GFX IP suspend coincides with a s0ix entry, don't schedule a delayed work, instead signal PMFW immediately to allow GFXOFF entry. GFXOFF is a prerequisite for s0ix entry. PMFW needs to be signaled about GFXOFF status before amd-pmc module passes OS HINT to PMFW telling that everything is ready for a safe s0ix entry. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1712 Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Limonciello <mario.limonciell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu: consolidate case statementsAlex Deucher
IP_VERSION(11, 0, 13) does the exact same thing as IP_VERSION(11, 0, 12) so squash them together. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu/jpeg: add jpeg2.6 start/endJames Zhu
Add jpeg2.6 start/end with updated PCTL0_MMHUB_DEEPSLEEP_IB address. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.lilu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdgpu/jpeg2: move jpeg2 shared macro to header fileJames Zhu
Move jpeg2 shared macro to header file Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.lilu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amdkfd: fix a potential ttm->sg memory leakLang Yu
Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr, but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it! Fixes: 264fb4d332f5 ("drm/amdgpu: Add multi-GPU DMA mapping helpers") Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-12 13:29:52 +0000