| Age | Commit message (Collapse) | Author |
|---|
|
If we haven't shipped and enabled firmware for a particular platform,
there is nothing the user can do about it. Don't scare the user with an
unactionable, unidentifiable warning!
<6> [310.769452] i915 0000:00:02.0: GuC: No firmware known for this platform!
<4> [310.769458] [drm] HuC: No firmware known for this platform!
Unify both GuC/HuC messages to include the device for which we lack the
firmware, and provide the platform name as an aide-memoire.
v2: Move and refine the message to common site of intel_uc_fw_fetch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108150246.1471-1-chris@chris-wilson.co.uk
|
|
After drm_fb_helper_fbdev_setup calls drm_fb_helper_init,
"dev->fb_helper" will be initialized (and thus drm_fb_helper_fini will
have some effect). After that, drm_fb_helper_initial_config is called
which may call the "fb_probe" driver callback.
This driver callback may call drm_fb_helper_defio_init (as is done by
drm_fb_helper_generic_probe) or set a framebuffer (as is done by bochs)
as documented. These are normally cleaned up on exit by
drm_fb_helper_fbdev_teardown which also calls drm_fb_helper_fini.
If an error occurs after "fb_probe", but before setup is complete, then
calling just drm_fb_helper_fini will leak resources. This was triggered
by df2052cc922 ("bochs: convert to drm_fb_helper_fbdev_setup/teardown"):
[ 50.008030] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer
[ 50.009436] bochs-drm 0000:00:02.0: [drm:drm_fb_helper_fbdev_setup] *ERROR* fbdev: Failed to set configuration (ret=-38)
[ 50.011456] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 2
[ 50.013604] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x280/0x2a0
[ 50.016175] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G T 4.20.0-rc7 #1
[ 50.017732] EIP: drm_mode_config_cleanup+0x280/0x2a0
...
[ 50.023155] Call Trace:
[ 50.023155] ? bochs_kms_fini+0x1e/0x30
[ 50.023155] ? bochs_unload+0x18/0x40
This can be reproduced with QEMU and CONFIG_FB_LITTLE_ENDIAN=n.
Link: https://lkml.kernel.org/r/20181221083226.GI23332@shao2-debian
Link: https://lkml.kernel.org/r/20181223004315.GA11455@al
Fixes: 8741216396b2 ("drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181223005507.28328-1-peter@lekensteyn.nl
|
|
If register_framebuffer() fails during fbdev setup we will leak the
framebuffer, the GEM buffer and the shadow buffer for defio. This is
because drm_fb_helper_fbdev_setup() just calls drm_fb_helper_fini() on
error not taking into account that register_framebuffer() can fail.
Since the generic emulation uses DRM client for its framebuffer and
backing buffer in addition to a shadow buffer, it's necessary to open code
drm_fb_helper_fbdev_setup() to properly handle the error path.
Error cleanup is removed from .fb_probe and is handled by one function for
all paths.
Fixes: 9060d7f49376 ("drm/fb-helper: Finish the generic fbdev emulation")
Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105181846.26495-1-noralf@tronnes.org
|
|
Minimal change to nuke the static buf.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107145149.10069-1-jani.nikula@intel.com
|
|
Just call drm_fence_put directly instead.
Also set vgfb->fence to NULL after dropping the reference.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181219122708.4586-4-kraxel@redhat.com
|
|
Sending the flush command only makes sense if we actually have
a framebuffer attached to the scanout (handle != 0).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181219122708.4586-3-kraxel@redhat.com
|
|
If we got an error response code from the host, print it to the log.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181219122708.4586-2-kraxel@redhat.com
|
|
As per the VirtIO spec, the virtqueues must be reset during cleanup
(see "3.3.1 Driver Requirements: Device Cleanup").
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190102175507.4653-2-ezequiel@collabora.com
|
|
The virtio_gpu_output is a member of struct virtio_gpu_device
and is not a dynamically-allocated chunk, so it's wrong to kfree() it.
Removing it fixes a memory corruption BUG() that can be triggered
when the virtio-gpu driver is removed.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190102175507.4653-1-ezequiel@collabora.com
|
|
Ignore trying to shrink from i915 if we fail to acquire the struct_mutex
in the shrinker while performing direct-reclaim. The trade-off being
(much) lower latency for non-i915 clients at an increased risk of being
unable to obtain a page from direct-reclaim without hitting the
oom-notifier. The proviso being that we still keep trying to hard
obtain the lock for kswapd so that we can reap under heavy memory
pressure.
v2: Taint all mutexes taken within the shrinker with the struct_mutex
subclass as an early warning system, and drop I915_SHRINK_ACTIVE from
vmap to reduce the number of dangerous paths. We also have to drop
I915_SHRINK_ACTIVE from oom-notifier to be able to make the same claim
that ACTIVE is only used from outside context, which fits in with a
longer strategy of avoiding stalls due to scanning active during
shrinking.
The danger in using the subclass struct_mutex is that we declare
ourselves more knowledgable than lockdep and deprive ourselves of
automatic coverage. Instead, we require ourselves to mark up any mutex
taken inside the shrinker in order to detect lock-inversion, and if we
miss any we are doomed to a deadlock at the worst possible moment.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107115509.12523-1-chris@chris-wilson.co.uk
|
|
Generally catch up with 5.0-rc1, and specifically get the changes:
96d4f267e40f ("Remove 'type' argument from access_ok() function")
0b2c8f8b6b0c ("i915: fix missing user_access_end() in page fault exception case")
594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next-queued
Make some drm headers self-contained with includes and forward
declarations.
This topic branch has already been merged to drm-misc-next as commit
1c95f662fcee ("Merge tag 'topic/drmp-cleanup-2019-01-02' of
git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next"). Now
merge it to drm-intel-next-queued to unblock some further drmP.h cleanup
without having to wait for a backmerge.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87pntfl6pa.fsf@intel.com
|
|
Being a mock device, we suffer no DMA restrictions, so set the coherent
mask to 64b.
v2: Fix up mock_huge_selftests
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109243
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107181856.23789-1-chris@chris-wilson.co.uk
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next
Make some drm headers self-contained with includes and forward declarations
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
# gpg: Signature made Wed 02 Jan 2019 10:47:51 AM CET
# gpg: using RSA key 1565A65B77B0632E1124E59CD398079D26ABEE6F
# gpg: Can't check signature: No public key
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87pntfl6pa.fsf@intel.com
|
|
Include the total size of closed vma when reporting the per_ctx_stats of
debugfs/i915_gem_objects.
Whilst adjusting the context tracking, note that we can simply use our
list of contexts in i915->contexts rather than circumlocute via
dev->filelist and the per-file context idr, with the result that we can
show objects allocated to different vm (i.e. contexts within a file).
We change the output to show every context of each client, with its own
unique set of objects (for full-ppgtt machines, i.e. gen7+, for older
hardware all objects are in the global gtt and so can not be associated
with a single context). That should result in no loss of information,
and for gen7+, no duplication of active objects.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107115509.12523-2-chris@chris-wilson.co.uk
|
|
Haswell also requires the RING_IMR flush for its unique vebox setup to
avoid losing interrupts, as per 476af9c26063 ("drm/i915/gen6: Flush
RING_IMR changes before changing the global GT IMR"):
On Baytail, notably, we can still detect missed interrupt syndrome
(where we never spot a completed request). In this case, it can be
alleviated by always keeping the interrupt unmasked, implying that the
interrupt is being lost in the window after modifying the IMR. (This is
the reason we still have the posting reads on enable_irq, if we remove
them we miss interrupts!) Having narrowed the issue down to the IMR,
rather than keeping it always enabled, applying the usual posting
read/flush of the RING_IMR before unmasking the GT IMR also seems to
prevent the missed interrupt. So be it.
References: 476af9c26063 ("drm/i915/gen6: Flush RING_IMR changes before changing the global GT IMR")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105115647.4970-1-chris@chris-wilson.co.uk
|
|
'ctx->handle' is unsigned, it never less than zero.
This patch use int 'tmp_handle' to handle the err condition.
Fixes: 62968144e673 ("drm: convert drm context code to use Linux idr")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181229024907.12852-1-yuehaibing@huawei.com
|
|
CC [M] drivers/gpu/drm/i915/intel_device_info.o
drivers/gpu/drm/i915/intel_device_info.c:727: warning: Function parameter or member 'dev_priv' not described in 'intel_device_info_runtime_init'
drivers/gpu/drm/i915/intel_device_info.c:727: warning: Excess function parameter 'info' description in 'intel_device_info_runtime_init'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105014652.3472-1-chris@chris-wilson.co.uk
|
|
Pull drm fixes from Dave Airlie:
"Happy New Year, just decloaking from leave to get some stuff from the
last week in before rc1:
core:
- two regression fixes for damage blob and atomic
i915 gvt:
- Some missed GVT fixes from the original pull
amdgpu:
- new PCI IDs
- SR-IOV fixes
- DC fixes
- Vega20 fixes"
* tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits)
drm: Put damage blob when destroy plane state
drm: fix null pointer dereference on null state pointer
drm/amdgpu: Add new VegaM pci id
drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output
drm/amdgpu: add Vega20 PSP ASD firmware loading
drm/amd/display: Fix MST dp_blank REG_WAIT timeout
drm/amd/display: validate extended dongle caps
drm/amd/display: Use div_u64 for flip timestamp ns to ms
drm/amdgpu/uvd:Change uvd ring name convention
drm/amd/powerplay: add Vega20 LCLK DPM level setting support
drm/amdgpu: print process info when job timeout
drm/amdgpu/nbio7.4: add hw bug workaround for vega20
drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12
drm/amd/display: Optimize passive update planes.
drm/amd/display: verify lane status before exiting verify link cap
drm/amd/display: Fix bug with not updating VSP infoframe
drm/amd/display: Add retry to read ddc_clock pin
drm/amd/display: Don't skip link training for empty dongle
drm/amd/display: Wait edp HPD to high in detect_sink
drm/amd/display: fix surface update sequence
...
|
|
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"This time the pull request is really small.
The most notable changes are fixing fbcon to not cause crash on
unregister_framebuffer() operation when there is more than one
framebuffer, adding config option to center the bootup logo and making
FB_BACKLIGHT config option tristate (which in turn uncovered incorrect
FB_BACKLIGHT usage by DRM's nouveau driver).
Summary:
- fix fbcon to not cause crash on unregister_framebuffer() when there
is more than one framebuffer (Noralf Trønnes)
- improve support for small rotated displays (Peter Rosin)
- fix probe failure handling in udlfb driver (Dan Carpenter)
- add config option to center the bootup logo (Peter Rosin)
- make FB_BACKLIGHT config option tristate (Rob Clark)
- remove superfluous HAS_DMA dependency for goldfishfb driver (Geert
Uytterhoeven)
- misc fixes (Alexey Khoroshilov, YueHaibing, Colin Ian King, Lubomir
Rintel)
- misc cleanups (Yangtao Li, Wen Yang)
also there is DRM's nouveau driver fix for wrong FB_BACKLIGHT config
option usage (FB_BACKLIGHT is for internal fbdev subsystem use only)"
* tag 'fbdev-v4.21' of git://github.com/bzolnier/linux:
drm/nouveau: fix incorrect FB_BACKLIGHT usage in Kconfig
fbdev: fbcon: Fix unregister crash when more than one framebuffer
fbdev: Remove depends on HAS_DMA in case of platform dependency
pxa168fb: trivial typo fix
fbdev: fsl-diu: remove redundant null check on cmap
fbdev: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE
fbdev: uvesafb: fix spelling mistake "memoery" -> "memory"
fbdev: fbmem: add config option to center the bootup logo
fbdev: fbmem: make fb_show_logo_line return the end instead of the height
video: fbdev: pxafb: Fix "WARNING: invalid free of devm_ allocated data"
fbdev: fbmem: behave better with small rotated displays and many CPUs
video: clps711x-fb: release disp device node in probe()
fbdev: make FB_BACKLIGHT a tristate
udlfb: fix some inconsistent NULL checking
|
|
Our attempt to account for bit17 swizzling of pread/pwrite onto tiled
objects was flawed due to the simple fact that we do not always know the
swizzling for a particular page (due to the swizzling varying based on
location in certain unbalanced configurations). Furthermore, the
pread/pwrite paths are now unbalanced in that we are required to use the
GTT as in some cases we do not have direct CPU access to the backing
physical pages (thus some paths trying to account for the swizzle, but
others neglecting, chaos ensues).
There are no known users who do use pread/pwrite into a tiled object
(you need to manually detile anyway, so why now just use mmap and avoid
the copy?) and no user bug reports to indicate that it is being used in
the wild. As no one is hitting the buggy path, we can just remove the
buggy code.
v2: Just use the fault allowing kmap() + normal copy_(to|from)_user
v3: Avoid int overflow in computing 'length' from 'remain' (Tvrtko)
References: fe115628d567 ("drm/i915: Implement pwrite without struct-mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105120758.9237-1-chris@chris-wilson.co.uk
|
|
Originally, the rule used to be that you'd have to do access_ok()
separately, and then user_access_begin() before actually doing the
direct (optimized) user access.
But experience has shown that people then decide not to do access_ok()
at all, and instead rely on it being implied by other operations or
similar. Which makes it very hard to verify that the access has
actually been range-checked.
If you use the unsafe direct user accesses, hardware features (either
SMAP - Supervisor Mode Access Protection - on x86, or PAN - Privileged
Access Never - on ARM) do force you to use user_access_begin(). But
nothing really forces the range check.
By putting the range check into user_access_begin(), we actually force
people to do the right thing (tm), and the range check vill be visible
near the actual accesses. We have way too long a history of people
trying to avoid them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When commit fddcd00a49e9 ("drm/i915: Force the slow path after a
user-write error") unified the error handling for various user access
problems, it didn't do the user_access_end() that is needed for the
unsafe_put_user() case.
It's not a huge deal: a missed user_access_end() will only mean that
SMAP protection isn't active afterwards, and for the error case we'll be
returning to user mode soon enough anyway. But it's wrong, and adding
the proper user_access_end() is trivial enough (and doing it for the
other error cases where it isn't needed doesn't hurt).
I noticed it while doing the same prep-work for changing
user_access_begin() that precipitated the access_ok() changes in commit
96d4f267e40f ("Remove 'type' argument from access_ok() function").
Fixes: fddcd00a49e9 ("drm/i915: Force the slow path after a user-write error")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@kernel.org # v4.20
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Register cpufreq notifier after we have initialized the crtc and
unregister it before we remove the ctrc. Receiving a cpufreq notify
without crtc causes a crash.
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
|
|
If we declare the driver wedged during early initialisation, we leave
the driver in an undefined state (with respect to GEM execution). As
this leads to unexpected behaviour if we allow the user to unwedge the
device (through debugfs, and performed by igt at test start), do not.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103213340.1669-1-chris@chris-wilson.co.uk
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Fixes for v4.21:
- Fix null pointer dereference on null state pointer.
- Fix leaking damage clip when destroying plane state.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/46c4dbcd-dc23-7b46-fda9-16fe33e6ceef@linux.intel.com
|
|
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we first introduced the reset to sanitize the GPU on taking over
from the BIOS and before returning control to third parties (the BIOS!),
we restricted it to only systems utilizing HW contexts as we were
uncertain of how stable our reset mechanism truly was. We now have
reasonable coverage across all machines that expose a GPU reset method,
and so we should be safe to sanitize the GPU state everywhere.
v2: We _have_ to skip the reset if it would clobber the display.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103112104.19561-1-chris@chris-wilson.co.uk
|
|
As the question of 32b/64b kernels became relevant in the light of
certain bugs, include that information in the error state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103101245.15100-1-chris@chris-wilson.co.uk
|
|
On Baytail, notably, we can still detect missed interrupt syndrome
(where we never spot a completed request). In this case, it can be
alleviated by always keeping the interrupt unmasked, implying that the
interrupt is being lost in the window after modifying the IMR. (This is
the reason we still have the posting reads on enable_irq, if we remove
them we miss interrupts!) Having narrowed the issue down to the IMR,
rather than keeping it always enabled, applying the usual posting
read/flush of the RING_IMR before unmasking the GT IMR also seems to
prevent the missed interrupt. So be it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190102163524.19353-1-chris@chris-wilson.co.uk
|
|
Delay the drm_modeset_acquire_init() until after we check for an
allocation failure so that we can return immediately upon error without
having to unwind.
WARNING: lock held when returning to user space!
4.20.0+ #174 Not tainted
------------------------------------------------
syz-executor556/8153 is leaving the kernel with locks still held!
1 lock held by syz-executor556/8153:
#0: 000000005100c85c (crtc_ww_class_acquire){+.+.}, at:
set_property_atomic+0xb3/0x330 drivers/gpu/drm/drm_mode_object.c:462
Reported-by: syzbot+6ea337c427f5083ebdf2@syzkaller.appspotmail.com
Fixes: 144a7999d633 ("drm: Handle properties in the core for atomic drivers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181230122842.21917-1-chris@chris-wilson.co.uk
|
|
Making FB_BACKLIGHT tristate by commit b4a1ed0cd18b ("fbdev:
make FB_BACKLIGHT a tristate") caused unmet dependencies in
some configurations:
WARNING: unmet direct dependencies detected for FB_BACKLIGHT
Depends on [m]: HAS_IOMEM [=y] && FB [=m]
Selected by [y]:
- DRM_NOUVEAU [=y] && HAS_IOMEM [=y] && DRM [=y] && PCI [=y] && MMU [=y] && DRM_NOUVEAU_BACKLIGHT [=y]
Selected by [m]:
- FB_NVIDIA [=m] && HAS_IOMEM [=y] && FB [=m] && PCI [=y] && FB_NVIDIA_BACKLIGHT [=y]
Fix it by making DRM_NOUVEAU select BACKLIGHT_CLASS_DEVICE and
BACKLIGHT_LCD_SUPPORT instead of FB_BACKLIGHT.
Fixes: b4a1ed0cd18b ("fbdev: make FB_BACKLIGHT a tristate")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Cc: Rob Clark <robdclark@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
With kasan on a slow machine, it can take an age to check all the
partial mappings in a single iteration, so break it up with a
cond_resched) to avoid RCU stall reports.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190102114431.23022-1-chris@chris-wilson.co.uk
|
|
Encourage use of INTEL_INFO() to access dev_priv->info to not accumulate
more direct users of ->info, making further changes easier.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5f5d81880046331f77624d00278528abc1cf30c6.1546267488.git.jani.nikula@intel.com
|
|
The debugfs, error state and regular dmesg logging dump needs seem to be
different. Remove the generic dump function only used for the welcome
message. This may be added back later when better abstractions are
identified, but at the moment this seems to be the simplest considering
the device info rework in progress. No longer rely on device info being
a substruct of dev_priv.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70ff0c7c0ec3ef8747af3c78e272b5a82be3d55b.1546267488.git.jani.nikula@intel.com
|
|
Hide the way device info is stored, in preparation of making device info
a pointer to the const rodata in i915_pci.c. No functional changes.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3cd626f248c0d6638f1288938bbb577a12286050.1546267488.git.jani.nikula@intel.com
|
|
With the static/runtime device info split, this makes more sense.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ad5b448e4e318df0d292d73e6c3378f3e6b9bae5.1546267488.git.jani.nikula@intel.com
|
|
Add a macro wrapper for display_mmio_offset access in register
definitions. Prep work for reducing direct dev_priv->info usage. No
functional changes.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aa4e8fd85e0445ec5be6c55151239072b4315fda.1546267488.git.jani.nikula@intel.com
|
|
First move the low hanging fruit, the fields that are only initialized
runtime. Use RUNTIME_INFO() exclusively to access the fields.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c24fe7a4b0492a888690c46814c0ff21ce2f12b1.1546267488.git.jani.nikula@intel.com
|
|
Un-inline drm_legacy_findmap() to not depend on struct drm_device
definition within drm_legacy.h, so that a forward declaration suffices.
Also include drm_hashtab.h in drm_legacy.h to make it more
self-contained. Make it easier to drop drmP.h includes.
v2: avoid including drm_device.h by un-inlining (Daniel)
[Updated commit message per Laurent's review while applying.]
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228130446.22141-1-jani.nikula@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- Page table code for AMD IOMMU now supports large pages where smaller
page-sizes were mapped before. VFIO had to work around that in the
past and I included a patch to remove it (acked by Alex Williamson)
- Patches to unmodularize a couple of IOMMU drivers that would never
work as modules anyway.
- Work to unify the the iommu-related pointers in 'struct device' into
one pointer. This work is not finished yet, but will probably be in
the next cycle.
- NUMA aware allocation in iommu-dma code
- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
- Scalable mode support for the Intel VT-d driver
- PM runtime improvements for the ARM-SMMU driver
- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
- Various smaller fixes and improvements
* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
iommu: Check for iommu_ops == NULL in iommu_probe_device()
ACPI/IORT: Don't call iommu_ops->add_device directly
iommu/of: Don't call iommu_ops->add_device directly
iommu: Consolitate ->add/remove_device() calls
iommu/sysfs: Rename iommu_release_device()
dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
xhci: Use device_iommu_mapped()
powerpc/iommu: Use device_iommu_mapped()
ACPI/IORT: Use device_iommu_mapped()
iommu/of: Use device_iommu_mapped()
driver core: Introduce device_iommu_mapped() function
iommu/tegra: Use helper functions to access dev->iommu_fwspec
iommu/qcom: Use helper functions to access dev->iommu_fwspec
iommu/of: Use helper functions to access dev->iommu_fwspec
iommu/mediatek: Use helper functions to access dev->iommu_fwspec
iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
iommu/dma: Use helper functions to access dev->iommu_fwspec
iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
ACPI/IORT: Use helper functions to access dev->iommu_fwspec
iommu: Introduce wrappers around dev->iommu_fwspec
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64
C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
and misc cleanups across several platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: at91: add support in soc driver for new SAM9X60
ARM: at91: add support in soc driver for LPDDR2 SiP
memory: omap-gpmc: Use of_node_name_eq for node name comparisons
bus: ti-sysc: Check for no-reset and no-idle flags at the child level
ARM: OMAP2+: Check also the first dts child for hwmod flags
soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: renesas: rcar-sysc: Fix power domain control after system resume
soc: renesas: rcar-sysc: Merge PM Domain registration and linking
soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
dt-bindings: sram: Add Allwinner suniv F1C100s
soc: sunxi: sram: Add support for the H5 SoC system control
soc: sunxi: sram: Enable EMAC clock access for H3 variant
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
dmaengine: pxa: make the filter function internal
...
|
|
Now that we have eliminated the CPU-side irq_seqno_barrier by moving the
delays on the GPU before emitting the MI_USER_INTERRUPT, we can remove
the engine->irq_seqno_barrier infrastructure. Though intentionally
slowing down the GPU is nasty, so is the code we can now remove!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228171641.16531-6-chris@chris-wilson.co.uk
|
|
The irq_seqno_barrier is a tradeoff between doing work on every request
(on the GPU) and doing work after every interrupt (on the CPU). We
presume we have many more requests than interrupts! However, for
Ironlake, the workaround is a pretty hideous usleep() and so even though
it was found we need to repeat the MI_STORE_DWORD_IMM 8 times, or about
1us of GPU time, doing so is preferrable than requiring a sleep of
125-250us on the CPU where we desire to respond immediately (ideally from
within the interrupt handler)!
The additional MI_STORE_DWORD_IMM also have the side-effect of flushing
MI operations from userspace which are not caught by MI_FLUSH!
Testcase: igt/gem_sync
Testcase: igt/gem_exec_whisper
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228171641.16531-5-chris@chris-wilson.co.uk
|
|
The irq_seqno_barrier is a tradeoff between doing work on every request
(on the GPU) and doing work after every interrupt (on the CPU). We
presume we have many more requests than interrupts! However, the current
w/a for Ivybridge is an implicit delay that currently fails sporadically
and consistently if we move the w/a into the irq handler itself. This
makes the CPU barrier untenable for upcoming interrupt handler changes
and so we need to replace it with a delay on the GPU before we send the
MI_USER_INTERRUPT. As it turns out that delay is 32x MI_STORE_DWORD_IMM,
or about 0.6us per request! Quite nasty, but the lesser of two evils
looking to the future.
Testcase: igt/gem_sync
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228171641.16531-4-chris@chris-wilson.co.uk
|
|
The MI_FLUSH_DW does appear coherent with the following
MI_USER_INTERRUPT, but only on Sandybridge. Ivybridge requires a heavier
hammer, but on Sandybridge we can stop requiring the irq_seqno barrier.
Testcase: igt/gem_sync
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228171641.16531-3-chris@chris-wilson.co.uk
|
|
Having transitioned to using PIPECONTROL to combine the flush with the
breadcrumb write using their post-sync functions, assume that this will
resolve the serialisation with the subsequent MI_USER_INTERRUPT. That is
when inspecting the breadcrumb after an interrupt we can rely on the write
being posted (i.e. the HWSP will be coherent).
Testing using gem_sync shows that the PIPECONTROL + CS stall does
serialise the command streamer sufficient that the breadcrumb lands
before the MI_USER_INTERRUPT. The same is not true for MI_FLUSH_DW.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228171641.16531-2-chris@chris-wilson.co.uk
|
|
Now that we perform the request flushing inline with emitting the
breadcrumb, we can remove the now redundant manual flush. And we can
also remove the infrastructure that remained only for its purpose.
v2: emit_breadcrumb_sz is in dwords, but rq->reserved_space is in bytes
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181228171641.16531-1-chris@chris-wilson.co.uk
|
|
drivers/gpu/drm/i915/intel_display.c:10708: warning: Function parameter or member 'cur' not described in 'intel_wm_need_update'
drivers/gpu/drm/i915/intel_display.c:10708: warning: Function parameter or member 'new' not described in 'intel_wm_need_update'
drivers/gpu/drm/i915/intel_display.c:10708: warning: Excess function parameter 'plane' description in 'intel_wm_need_update'
drivers/gpu/drm/i915/intel_display.c:10708: warning: Excess function parameter 'state' description in 'intel_wm_need_update'
References: cd1d3ee90e5e ("drm/i915: Use intel_ types more consistently for watermark code (v2)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181231143505.2523-1-chris@chris-wilson.co.uk
|
|
Macros with this much magic in them deserve some explanatory text.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6f012851a54433b23cb4752f9d4ef523165b1e58.1545920737.git.jani.nikula@intel.com
|
