summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2024-12-10drm/amdgpu: make convert_ras_err_addr visible outside UMC blockTao Zhou
And change some UMC v12 specific functions to generic version, so the code can be shared. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: store PA with column bits cleared for RAS bad pageTao Zhou
So the code can be simplified, and no need to expose the detail of PA format outside address conversion. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: reduce the mmio writes in kiq settingPrike Liang
There's no need to perform the two MMIO writes in the KIQ Setting registers programmed period, and reducing the MMIO writes will save the driver loading time. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu/sdma4.4.2: implement ring reset callback for sdma4.4.2Jiadong Zhu
Implement sdma queue reset callback via SMU interface. v2: Leverage inst_stop/start functions in reset sequence. Use GET_INST for physical SDMA instance. Disable apu for sdma reset. v3: Rephrase error prints. v4: Remove redundant prints. Remove setting PREEMPT registers as soft reset handles it. Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/pm: implement dpm sdma reset functionJiadong Zhu
Implement sdma soft reset by sending MSG_ResetSDMA on smu 13.0.6. v2: Add firmware version for the reset message. v3: Add ip version check. Print inst_mask on failure. Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/pm: update smu_v13_0_6 smu headerJiadong Zhu
update smu header for sdma soft reset. Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: remove redundant RAS error address coversion codeTao Zhou
Only one interface is responsible for the conversion. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/amdgpu: Add support for isp buffersPratap Nirujogi
Add support to create user BOs with MC address for isp using the dma-buf handle exported for the buffers allocated from system memory in isp driver. Export amdgpu_bo_create_kernel() and amdgpu_bo_free_kernel() as well for isp to allocate GTT internal buffers required for fw to run. Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdgpu: simplify RAS page retirement in one memory rowTao Zhou
Take R13 and column bits as a whole for UMC v12. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdkfd: pause autosuspend when creating pddJesse.zhang@amd.com
When using MES creating a pdd will require talking to the GPU to setup the relevant context. The code here forgot to wake up the GPU in case it was in suspend, this causes KVM to EFAULT for passthrough GPU for example. This issue can be masked if the GPU was woken up by other things (e.g. opening the KMS node) first and have not yet gone to sleep. v4: do the allocation of proc_ctx_bo in a lazy fashion when the first queue is created in a process (Felix) Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-10drm/amdgpu: fix when the cleaner shader is emittedChristian König
Emitting the cleaner shader must come after the check if a VM switch is necessary or not. Otherwise we will emit the cleaner shader every time and not just when it is necessary because we switched between applications. This can otherwise crash on gang submit and probably decreases performance quite a bit. v2: squash in fix from Srini (Alex) Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: ee7a846ea27b ("drm/amdgpu: Emit cleaner shader at end of IB submission") Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-10drm/amdgpu: Fix ISP HW init issuePratap Nirujogi
ISP hw_init is not called with the recent changes related to hw init levels. AMDGPU_INIT_LEVEL_DEFAULT is ignoring the ISP IP block as AMDGPU_IP_BLK_MASK_ALL is derived using incorrect max number of IP blocks. Update AMDGPU_IP_BLK_MASK_ALL to use AMD_IP_BLOCK_TYPE_NUM instead of AMDGPU_MAX_IP_NUM to fix the issue. Fixes: 14f2fe34f5c6 ("drm/amdgpu: Add init levels") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amdkfd: hard-code MALL cacheline size for gfx11, gfx12Harish Kasiviswanathan
This information is not available in ip discovery table. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: David Belanger <david.belanger@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-10drm/amdkfd: hard-code cacheline size for gfx11Harish Kasiviswanathan
This information is not available in ip discovery table. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: David Belanger <david.belanger@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-10drm/amdkfd: Dereference null return valueAndrew Martin
In the function pqm_uninit there is a call-assignment of "pdd = kfd_get_process_device_data" which could be null, and this value was later dereferenced without checking. Fixes: fb91065851cd ("drm/amdkfd: Refactor queue wptr_bo GART mapping") Signed-off-by: Andrew Martin <Andrew.Martin@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-05drm/amdkfd: Correct the migration DMA map directionPrike Liang
The SVM DMA device map direction should be set the same as the DMA unmap setting, otherwise the DMA core will report the following warning. Before finialize this solution, there're some discussion on the DMA mapping type(stream-based or coherent) in this KFD migration case, followed by https://lore.kernel.org/all/04d4ab32 -45a1-4b88-86ee-fb0f35a0ca40@amd.com/T/. As there's no dma_sync_single_for_*() in the DMA buffer accessed that because this migration operation should be sync properly and automatically. Give that there's might not be a performance problem in various cache sync policy of DMA sync. Therefore, in order to simplify the DMA direction setting alignment, let's set the DMA map direction as BIDIRECTIONAL. [ 150.834218] WARNING: CPU: 8 PID: 1812 at kernel/dma/debug.c:1028 check_unmap+0x1cc/0x930 [ 150.834225] Modules linked in: amdgpu(OE) amdxcp drm_exec(OE) gpu_sched drm_buddy(OE) drm_ttm_helper(OE) ttm(OE) drm_suballoc_helper(OE) drm_display_helper(OE) drm_kms_helper(OE) i2c_algo_bit rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace netfs xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo iptable_nat xt_addrtype iptable_filter br_netfilter nvme_fabrics overlay nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c bridge stp llc sch_fq_codel intel_rapl_msr amd_atl intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic snd_hda_scodec_component snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg edac_mce_amd snd_pci_acp6x snd_hda_codec snd_acp_config snd_hda_core snd_hwdep snd_soc_acpi kvm_amd sunrpc snd_pcm kvm binfmt_misc snd_seq_midi crct10dif_pclmul snd_seq_midi_event ghash_clmulni_intel sha512_ssse3 snd_rawmidi nls_iso8859_1 sha256_ssse3 sha1_ssse3 snd_seq aesni_intel snd_seq_device crypto_simd snd_timer cryptd input_leds [ 150.834310] wmi_bmof serio_raw k10temp rapl snd sp5100_tco ipmi_devintf soundcore ccp ipmi_msghandler cm32181 industrialio mac_hid msr parport_pc ppdev lp parport efi_pstore drm(OE) ip_tables x_tables pci_stub crc32_pclmul nvme ahci libahci i2c_piix4 r8169 nvme_core i2c_designware_pci realtek i2c_ccgx_ucsi video wmi hid_generic cdc_ether usbnet usbhid hid r8152 mii [ 150.834354] CPU: 8 PID: 1812 Comm: rocrtst64 Tainted: G OE 6.10.0-custom #492 [ 150.834358] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021 [ 150.834360] RIP: 0010:check_unmap+0x1cc/0x930 [ 150.834363] Code: c0 4c 89 4d c8 e8 34 bf 86 00 4c 8b 4d c8 4c 8b 45 c0 48 8b 4d b8 48 89 c6 41 57 4c 89 ea 48 c7 c7 80 49 b4 84 e8 b4 81 f3 ff <0f> 0b 48 c7 c7 04 83 ac 84 e8 76 ba fc ff 41 8b 76 4c 49 8d 7e 50 [ 150.834365] RSP: 0018:ffffaac5023739e0 EFLAGS: 00010086 [ 150.834368] RAX: 0000000000000000 RBX: ffffffff8566a2e0 RCX: 0000000000000027 [ 150.834370] RDX: ffff8f6a8f621688 RSI: 0000000000000001 RDI: ffff8f6a8f621680 [ 150.834372] RBP: ffffaac502373a30 R08: 00000000000000c9 R09: ffffaac502373850 [ 150.834373] R10: ffffaac502373848 R11: ffffffff84f46328 R12: ffffaac502373a40 [ 150.834375] R13: ffff8f6741045330 R14: ffff8f6741a77700 R15: ffffffff84ac831b [ 150.834377] FS: 00007faf0fc94c00(0000) GS:ffff8f6a8f600000(0000) knlGS:0000000000000000 [ 150.834379] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.834381] CR2: 00007faf0b600020 CR3: 000000010a52e000 CR4: 0000000000350ef0 [ 150.834383] Call Trace: [ 150.834385] <TASK> [ 150.834387] ? show_regs+0x6d/0x80 [ 150.834393] ? __warn+0x8c/0x140 [ 150.834397] ? check_unmap+0x1cc/0x930 [ 150.834400] ? report_bug+0x193/0x1a0 [ 150.834406] ? handle_bug+0x46/0x80 [ 150.834410] ? exc_invalid_op+0x1d/0x80 [ 150.834413] ? asm_exc_invalid_op+0x1f/0x30 [ 150.834420] ? check_unmap+0x1cc/0x930 [ 150.834425] debug_dma_unmap_page+0x86/0x90 [ 150.834431] ? srso_return_thunk+0x5/0x5f [ 150.834435] ? rmap_walk+0x28/0x50 [ 150.834438] ? srso_return_thunk+0x5/0x5f [ 150.834441] ? remove_migration_ptes+0x79/0x80 [ 150.834445] ? srso_return_thunk+0x5/0x5f [ 150.834448] dma_unmap_page_attrs+0xfa/0x1d0 [ 150.834453] svm_range_dma_unmap_dev+0x8a/0xf0 [amdgpu] [ 150.834710] svm_migrate_ram_to_vram+0x361/0x740 [amdgpu] [ 150.834914] svm_migrate_to_vram+0xa8/0xe0 [amdgpu] [ 150.835111] svm_range_set_attr+0xff2/0x1450 [amdgpu] [ 150.835311] svm_ioctl+0x4a/0x50 [amdgpu] [ 150.835510] kfd_ioctl_svm+0x54/0x90 [amdgpu] [ 150.835701] kfd_ioctl+0x3c2/0x530 [amdgpu] [ 150.835888] ? __pfx_kfd_ioctl_svm+0x10/0x10 [amdgpu] [ 150.836075] ? srso_return_thunk+0x5/0x5f [ 150.836080] ? tomoyo_file_ioctl+0x20/0x30 [ 150.836086] __x64_sys_ioctl+0x9c/0xd0 [ 150.836091] x64_sys_call+0x1219/0x20d0 [ 150.836095] do_syscall_64+0x51/0x120 [ 150.836098] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 150.836102] RIP: 0033:0x7faf0f11a94f [ 150.836105] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 [ 150.836107] RSP: 002b:00007ffeced26bc0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 150.836110] RAX: ffffffffffffffda RBX: 000055c683528fb0 RCX: 00007faf0f11a94f [ 150.836112] RDX: 00007ffeced26c60 RSI: 00000000c0484b20 RDI: 0000000000000003 [ 150.836114] RBP: 00007ffeced26c50 R08: 0000000000000000 R09: 0000000000000001 [ 150.836115] R10: 0000000000000032 R11: 0000000000000246 R12: 000055c683528bd0 [ 150.836117] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000000 [ 150.836122] </TASK> [ 150.836124] ---[ end trace 0000000000000000 ]--- Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-05drm/amd/pm: Set SMU v13.0.7 default workload typeKenneth Feng
Set the default workload type to bootup type on smu v13.0.7. This is because of the constraint on smu v13.0.7. Gfx activity has an even higher set point on 3D fullscreen mode than the one on bootup mode. This causes the 3D fullscreen mode's performance is worse than the bootup mode's performance for the lightweighted/medium workload. For the high workload, the performance is the same between 3D fullscreen mode and bootup mode. v2: set the default workload in ASIC specific file Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x
2024-12-05drm/amd/pm: Initialize power profile modeLijo Lazar
Refactor such that individual SMU IP versions can choose the startup power profile mode. If no preference, then use the generic default power profile selection logic. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x
2024-12-05amdgpu/uvd: get ring reference from rq schedulerDavid (Ming Qiang) Wu
base.sched may not be set for each instance and should not be used for cases such as non-IB tests. Fixes: 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()") Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-05drm/amdgpu: fix UVD contiguous CS mapping problemChristian König
When starting the mpv player, Radeon R9 users are observing the below error in dmesg. [drm:amdgpu_uvd_cs_pass2 [amdgpu]] *ERROR* msg/fb buffer ff00f7c000-ff00f7e000 out of 256MB segment! The patch tries to set the TTM_PL_FLAG_CONTIGUOUS for both user flag(AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS) set and not set cases. v2: Make the TTM_PL_FLAG_CONTIGUOUS mandatory for user BO's. v3: revert back to v1, but fix the check instead (chk). Closes:https://gitlab.freedesktop.org/drm/amd/-/issues/3599 Closes:https://gitlab.freedesktop.org/drm/amd/-/issues/3501 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.10+
2024-12-05drm/amdgpu: use sjt mec fw on gfx943 for sriovVictor Zhao
Use second jump table in sriov for live migration or mulitple VF support so different VF can load different version of MEC as long as they support sjt Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-05Revert "drm/amdgpu: Fix ISP hw init issue"Pratap Nirujogi
This reverts commit 274e3f4596446955bf17680fd4eb5489f5ecac00. Additional review comments to address. Will resubmit. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-03drm/amdgpu: rework resume handling for display (v2)Alex Deucher
Split resume into a 3rd step to handle displays when DCC is enabled on DCN 4.0.1. Move display after the buffer funcs have been re-enabled so that the GPU will do the move and properly set the DCC metadata for DCN. v2: fix fence irq resume ordering Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x
2024-12-02drm/amd/pm: fix and simplify workload handlingAlex Deucher
smu->workload_mask is IP specific and should not be messed with in the common code. The mask bits vary across SMU versions. Move all handling of smu->workload_mask in to the backends and simplify the code. Store the user's preference in smu->power_profile_mode which will be reflected in sysfs. For internal driver profile switches for KFD or VCN, just update the workload mask so that the user's preference is retained. Remove all of the extra now unused workload related elements in the smu structure. v2: use refcounts for workload profiles v3: rework based on feedback from Lijo v4: fix the refcount on failure, drop backend mask v5: rework custom handling v6: handle failure cleanup with custom profile v7: Update documentation Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Kenneth Feng <kenneth.feng@amd.com> Cc: Lijo Lazar <lijo.lazar@amd.com> Cc: stable@vger.kernel.org # 6.11.x
2024-12-02Revert "drm/amd/pm: correct the workload setting"Alex Deucher
This reverts commit 74e1006430a5377228e49310f6d915628609929e. This causes a regression in the workload selection. A more extensive fix is being worked on. For now, revert. This came back after a merge in 6.13-rc1, so revert again. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618 Fixes: 74e1006430a5 ("drm/amd/pm: correct the workload setting") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 44f392fbf628a7ff2d8bb8e83ca1851261f81a6f)
2024-12-02drm/amdgpu: fix sriov reinit late ordersYiqing Yao
Use found block to call correct init/resume function on the block. Set status.hw for resume and init. Print re-init result again. Change to use dev_info. Use amdgpu_device_ip_get_ip_block to get target block instead of loop. Fixes: 502d76308d45 ("drm/amdgpu: validate resume before function call") Signed-off-by: Yiqing Yao <YiQing.Yao@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amdgpu: Fix ISP hw init issuePratap Nirujogi
ISP hw_init is not called with the recent changes related to hw init levels. AMDGPU_INIT_LEVEL_DEFAULT is ignoring the ISP IP block as AMDGPU_IP_BLK_MASK_ALL is derived using incorrect max number of IP blocks. Update AMDGPU_IP_BLK_MASK_ALL to use AMDGPU_MAX_IP_NUM instead of (AMDGPU_MAX_IP_NUM - 1) to fix the issue. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Fixes: 14f2fe34f5c6 ("drm/amdgpu: Add init levels") Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Add hblank borrowing supportChris Park
[WHY] Some DSC timing failed at bandwidth validation due to hactive can't be evenly divided on each ODM segment. [HOW] Borrow from hblank to increase hactive to support these timing. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Limit VTotal range to max hw cap minus fpDillon Varone
[WHY & HOW] Hardware does not support the VTotal to be between fp2 lines of the maximum possible VTotal, so add a capability flag to track it and apply where necessary. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Correct prefetch calculationLo-an Chen
[WHY] The minimum value of the dst_y_prefetch_equ was not correct in prefetch calculation whice causes OPTC underflow. [HOW] Add the min operation of dst_y_prefetch_equ in prefetch calculation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Lo-an Chen <lo-an.chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Add option to retrieve detile buffer sizeSung Lee
[WHY] For better power profiling knowing the detile buffer size at a given point in time would be useful. [HOW] Add interface to retrieve detile buffer from dc state. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Sung Lee <Sung.Lee@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Add a left edge pixel if in YCbCr422 or YCbCr420 and odmPeterson Guo
[WHY] On some cards when odm is used, the monitor will have 2 separate pipes split vertically. When compression is used on the YCbCr colour space on the second pipe to have correct colours, we need to read a pixel from the end of first pipe to accurately display colours. Hardware was programmed properly to account for this extra pixel but it was not calculated properly in software causing a split screen on some monitors. [HOW] The fix adjusts the second pipe's viewport and timings if the pixel encoding is YCbCr422 or YCbCr420. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Peterson Guo <peterson.guo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amdkfd: hard-code cacheline for gc943,gc944David Yat Sin
Cacheline size is not available in IP discovery for gc943,gc944. Signed-off-by: David Yat Sin <David.YatSin@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdkfd: add MEC version that supports no PCIe atomics for GFX12Sreekant Somasekharan
Add MEC version from which alternate support for no PCIe atomics is provided so that device is not skipped during KFD device init in GFX1200/GFX1201. Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x
2024-12-02drm/amd/display: Fix programming backlight on OLED panelsMario Limonciello
commit 38077562e059 ("drm/amd/display: Implement new backlight_level_params structure") adjusted DC core to require the backlight type to be programmed in the dc link when changing brightness. This isn't initialized in amdgpu_dm for OLED panels though which broke brightness. Explicitly initialize when aux support is enabled. Reported-and-tested-by: Luke Jones <luke@ljones.dev> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3792 Fixes: 38077562e059 ("drm/amd/display: Implement new backlight_level_params structure") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20241128032200.2085398-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd: Sanity check the ACPI EDIDMario Limonciello
An HP Pavilion Aero Laptop 13-be0xxx/8916 has an ACPI EDID, but using it is causing corruption. It's got illogical values of not specifying a digital interface. Sanity check the ACPI EDID to avoid tripping such problems. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3782 Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20241128032500.2088288-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amdgpu/hdp7.0: do a posting read when flushing HDPAlex Deucher
Need to read back to make sure the write goes through. Cc: David Belanger <david.belanger@amd.com> Reviewed-by: Frank Min <frank.min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdgpu/hdp6.0: do a posting read when flushing HDPAlex Deucher
Need to read back to make sure the write goes through. Cc: David Belanger <david.belanger@amd.com> Reviewed-by: Frank Min <frank.min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdgpu/hdp5.2: do a posting read when flushing HDPAlex Deucher
Need to read back to make sure the write goes through. Cc: David Belanger <david.belanger@amd.com> Reviewed-by: Frank Min <frank.min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdgpu/hdp5.0: do a posting read when flushing HDPAlex Deucher
Need to read back to make sure the write goes through. Cc: David Belanger <david.belanger@amd.com> Reviewed-by: Frank Min <frank.min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdgpu/hdp4.0: do a posting read when flushing HDPAlex Deucher
Need to read back to make sure the write goes through. Cc: David Belanger <david.belanger@amd.com> Reviewed-by: Frank Min <frank.min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-12-02drm/amdgpu/jpeg1.0: fix idle work handlerAlex Deucher
On VCN 1.0, VCN and JPEG use the same worker thread so cancel the vcn worker rather than jpeg. On VCN 2.0 and newer there are separate workers for each. Fixes: 93df74873703 ("drm/amdgpu/jpeg: cancel the jpeg worker") Tested-by: George Zhang <george.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-29Merge tag 'drm-next-2024-11-29' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Merge window fixes, mostly amdgpu and xe, with a few other minor ones, all looks fairly normal, i915: - hdcp: Fix when the first read and write are retried xe: - Wake up waiters after wait condition set to true - Mark the preempt fence workqueue as reclaim - Update xe2 graphics name string - Fix a couple of guc submit races - Fix pat index usage in migrate - Ensure non-cached migrate pagetable bo mappings - Take a PM ref in the delayed snapshot capture worker amdgpu: - SMU 13.0.6 fixes - XGMI fixes - SMU 13.0.7 fixes - Misc code cleanups - Plane refcount fixes - DCN 4.0.1 fixes - DC power fixes - DTO fixes - NBIO 7.11 fixes - SMU 14.0.x fixes - Reset fixes - Enable DC on LoongArch - Sysfs hotplug warning fix - Misc small fixes - VCN 4.0.3 fix - Slab usage fix - Jpeg delayed work fix amdkfd: - wptr handling fixes radeon: - Use ttm_bo_move_null() - Constify struct pci_device_id - Fix spurious hotplug - HPD fix rockchip - fix 32-bit build" * tag 'drm-next-2024-11-29' of https://gitlab.freedesktop.org/drm/kernel: (48 commits) drm/xe: Take PM ref in delayed snapshot capture worker drm/xe/migrate: use XE_BO_FLAG_PAGETABLE drm/xe/migrate: fix pat index usage drm/xe/guc_submit: fix race around suspend_pending drm/xe/guc_submit: fix race around pending_disable drm/xe: Update xe2_graphics name string drm/rockchip: avoid 64-bit division Revert "drm/radeon: Delay Connector detecting when HPD singals is unstable" drm/amdgpu/jpeg: cancel the jpeg worker drm/amdgpu: fix usage slab after free drm/amdgpu/vcn: reset fw_shared when VCPU buffers corrupted on vcn v4.0.3 drm/amdgpu: Fix sysfs warning when hotplugging drm/amdgpu: Add sysfs interface for vcn reset mask drm/amdgpu/gmc7: fix wait_for_idle callers drm/amd/pm: Remove arcturus min power limit drm/amd/pm: skip setting the power source on smu v14.0.2/3 drm/amd/pm: disable pcie speed switching on Intel platform for smu v14.0.2/3 drm/amdkfd: Use the correct wptr size drm/xe: Mark preempt fence workqueue as reclaim drm/xe/ufence: Wake up waiters after setting ufence->signalled ...
2024-11-29Merge tag 'driver-core-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is a small set of driver core changes for 6.13-rc1. Nothing major for this merge cycle, except for the two simple merge conflicts are here just to make life interesting. Included in here are: - sysfs core changes and preparations for more sysfs api cleanups that can come through all driver trees after -rc1 is out - fw_devlink fixes based on many reports and debugging sessions - list_for_each_reverse() removal, no one was using it! - last-minute seq_printf() format string bug found and fixed in many drivers all at once. - minor bugfixes and changes full details in the shortlog" * tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits) Fix a potential abuse of seq_printf() format string in drivers cpu: Remove spurious NULL in attribute_group definition s390/con3215: Remove spurious NULL in attribute_group definition perf: arm-ni: Remove spurious NULL in attribute_group definition driver core: Constify bin_attribute definitions sysfs: attribute_group: allow registration of const bin_attribute firmware_loader: Fix possible resource leak in fw_log_firmware_info() drivers: core: fw_devlink: Fix excess parameter description in docstring driver core: class: Correct WARN() message in APIs class_(for_each|find)_device() cacheinfo: Use of_property_present() for non-boolean properties cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap() drivers: core: fw_devlink: Make the error message a bit more useful phy: tegra: xusb: Set fwnode for xusb port devices drm: display: Set fwnode for aux bus devices driver core: fw_devlink: Stop trying to optimize cycle detection logic driver core: Constify attribute arguments of binary attributes sysfs: bin_attribute: add const read/write callback variants sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR() sysfs: treewide: constify attribute callback of bin_attribute::llseek() sysfs: treewide: constify attribute callback of bin_attribute::mmap() ...
2024-11-29Merge tag 'drm-xe-next-fixes-2024-11-28' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next Driver Changes: - Update xe2 graphics name string (Matt Roper) - Fix a couple of guc submit races (Matt Auld) - Fix pat index usage in migrate (Matt Auld) - Ensure non-cached migrate pagetable bo mappings (Matt Auld) - Take a PM ref in the delayed snapshot capture worker (Matt Brost) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z0iOjKwEGVo_DmgY@fedora
2024-11-29Merge tag 'drm-misc-next-fixes-2024-11-28' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next A single buildfix for 32-bits rockchip compilation. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1f91eeaa-d3e4-4eca-9375-24c467f6976d@linux.intel.com
2024-11-28drm/xe: Take PM ref in delayed snapshot capture workerMatthew Brost
The delayed snapshot capture worker can access the GPU or VRAM both of which require a PM reference. Take a reference in this worker. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 4f04d07c0a94 ("drm/xe: Faster devcoredump") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241126174615.2665852-5-matthew.brost@intel.com (cherry picked from commit 1c6878af115a4586a40d6c14d530fa9f93e0bd83) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-11-28drm/xe/migrate: use XE_BO_FLAG_PAGETABLEMatthew Auld
On some HW we want to avoid the host caching PTEs, since access from GPU side can be incoherent. However here the special migrate object is mapping PTEs which are written from the host and potentially cached. Use XE_BO_FLAG_PAGETABLE to ensure that non-cached mapping is used, on platforms where this matters. Fixes: 7a060d786cc1 ("drm/xe/mtl: Map PPGTT as CPU:WC") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241126181259.159713-4-matthew.auld@intel.com (cherry picked from commit febc689b27d28973cd02f667548a5dca383d859a) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-11-28drm/xe/migrate: fix pat index usageMatthew Auld
XE_CACHE_WB must be converted into the per-platform pat index for that particular caching mode, otherwise we are just encoding whatever happens to be the value of that enum. Fixes: e8babb280b5e ("drm/xe: Convert multiple bind ops into single job") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: <stable@vger.kernel.org> # v6.12+ Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241126181259.159713-3-matthew.auld@intel.com (cherry picked from commit f3dc9246f9c3cd5a7d8fd70cfd805bfc52214e2e) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2024-11-28drm/xe/guc_submit: fix race around suspend_pendingMatthew Auld
Currently in some testcases we can trigger: xe 0000:03:00.0: [drm] Assertion `exec_queue_destroyed(q)` failed! .... WARNING: CPU: 18 PID: 2640 at drivers/gpu/drm/xe/xe_guc_submit.c:1826 xe_guc_sched_done_handler+0xa54/0xef0 [xe] xe 0000:03:00.0: [drm] *ERROR* GT1: DEREGISTER_DONE: Unexpected engine state 0x00a1, guc_id=57 Looking at a snippet of corresponding ftrace for this GuC id we can see: 162.673311: xe_sched_msg_add: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3 162.673317: xe_sched_msg_recv: dev=0000:03:00.0, gt=1 guc_id=57, opcode=3 162.673319: xe_exec_queue_scheduling_disable: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0 162.674089: xe_exec_queue_kill: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0x29, flags=0x0 162.674108: xe_exec_queue_close: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0 162.674488: xe_exec_queue_scheduling_done: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa9, flags=0x0 162.678452: xe_exec_queue_deregister: dev=0000:03:00.0, 1:0x2, gt=1, width=1, guc_id=57, guc_state=0xa1, flags=0x0 It looks like we try to suspend the queue (opcode=3), setting suspend_pending and triggering a disable_scheduling. The user then closes the queue. However the close will also forcefully signal the suspend fence after killing the queue, later when the G2H response for disable_scheduling comes back we have now cleared suspend_pending when signalling the suspend fence, so the disable_scheduling now incorrectly tries to also deregister the queue. This leads to warnings since the queue has yet to even be marked for destruction. We also seem to trigger errors later with trying to double unregister the same queue. To fix this tweak the ordering when handling the response to ensure we don't race with a disable_scheduling that didn't actually intend to perform an unregister. The destruction path should now also correctly wait for any pending_disable before marking as destroyed. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3371 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241122161914.321263-6-matthew.auld@intel.com (cherry picked from commit f161809b362f027b6d72bd998e47f8f0bad60a2e) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-15 12:20:06 +0000