| Age | Commit message (Collapse) | Author |
|---|
|
We need the driver core fix in here as well for future changes.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.18
1. Transfer display binding document to yaml format.
2. Add mt8195 display device binding.
3. Allow commands to be sent during video mode.
4. Add wait_for_event for crtc disable by cmdq.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1645934583-2018-1-git-send-email-chunkuang.hu@kernel.org
|
|
mtk_drm_crtc_atomic_disable will send an async cmd to cmdq driver,
so it may not finish when cmdq_suspend is called sometimes.
Add wait_for_event after sending async disable plane cmd to make
sure the lastest cmd is done before cmdq_suspend.
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20211202064039.20797-2-jason-jh.lin@mediatek.com/
|
|
On DG2 we allow objects that are smaller than the min_page_size, under
the premise that these are never mapped by the GTT, like with the paging
structures. Currently the suspend-resume path will try to map such
objects through the migration vm, which hits:
[ 560.529217] kernel BUG at drivers/gpu/drm/i915/gt/intel_migrate.c:431!
[ 560.536081] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 560.541629] CPU: 4 PID: 2062 Comm: rtcwake Tainted: G W 5.17.0-rc5-demarchi+ #175
[ 560.550716] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWR1.R00.X220.B00.2103302221 03/30/2021
[ 560.563627] RIP: 0010:emit_pte+0x2e7/0x380 [i915]
[ 560.568665] Code: ee 02 48 89 69 04 83 c6 05 83 c0 05 39 f0 0f 4f c6 48 8b 73 08 39 d0 0f 4f c2 44 89 f2 4c 8d 4a ff 49 85 f1 0f 84 62 fe ff ff <0f> 0b 48 c7 03 00 00 00 00 4d 89 c6 8b 01 48 29 ce 48 8d 57 0c 48
[ 560.587691] RSP: 0018:ffffc9000104f8a0 EFLAGS: 00010206
[ 560.592906] RAX: 0000000000000040 RBX: ffffc9000104f908 RCX: ffffc900025114d0
[ 560.600024] RDX: 0000000000010000 RSI: 00000003f9fe2000 RDI: ffffc900025114dc
[ 560.607458] RBP: 0000000001840000 R08: ffff88810f335540 R09: 000000000000ffff
[ 560.614865] R10: 000000000000081b R11: 0000000000000001 R12: 000000000000081b
[ 560.622300] R13: 0000000000000000 R14: 0000000000010000 R15: ffff888107c3e240
[ 560.629716] FS: 00007f5b7c086580(0000) GS:ffff88846dc00000(0000) knlGS:0000000000000000
[ 560.638090] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 560.644132] CR2: 00007f3ab0a133a8 CR3: 000000010a43e003 CR4: 00000000003706e0
[ 560.651590] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 560.659002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 560.666438] Call Trace:
[ 560.668885] <TASK>
[ 560.670983] intel_context_migrate_copy+0x1b1/0x4c0 [i915]
[ 560.676794] __i915_ttm_move+0x628/0x790 [i915]
[ 560.681704] ? dma_resv_iter_next+0x8f/0xb0
[ 560.686223] ? dma_resv_iter_first+0xe5/0x140
[ 560.690894] ? i915_deps_add_resv+0x4b/0x110 [i915]
[ 560.696147] ? dma_resv_reserve_shared+0x161/0x310
[ 560.701228] i915_gem_obj_copy_ttm+0x10f/0x220 [i915]
[ 560.706650] i915_ttm_backup+0x191/0x2f0 [i915]
[ 560.711558] i915_gem_process_region+0x266/0x3b0 [i915]
[ 560.717153] ? verify_cpu+0xf0/0x100
[ 560.721040] ? pci_pm_resume_early+0x20/0x20
[ 560.725603] i915_ttm_backup_region+0x47/0x70 [i915]
[ 560.730927] i915_gem_backup_suspend+0x141/0x170 [i91
For now let's just force the memcpy path for such objects during
suspend-resume.
Fixes: 00e27ad85bc9 ("drm/i915/migrate: add acceleration support for DG2")
Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225103443.225228-1-matthew.auld@intel.com
|
|
Now we have the access to content of GuC ADS either using iosys_map
API or using a temporary buffer. Remove guc->ads_blob as there shouldn't
be updates using the bare pointer anymore.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-17-lucas.demarchi@intel.com
|
|
Now that all the called functions from __guc_ads_init() are converted to
use ads_map, stop using ads_blob in __guc_ads_init().
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-16-lucas.demarchi@intel.com
|
|
Now that the regset list is prepared, convert guc_mmio_reg_state_init()
to use iosys_map to copy the array to the final location and
initialize additional fields in ads.reg_state_list.
v2: Just use an offset instead of temporary iosys_map.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-15-lucas.demarchi@intel.com
|
|
Use iosys_map to write the fields ads.capture_*.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-14-lucas.demarchi@intel.com
|
|
Use iosys_map to write the fields system_info.mapping_table[][].
Since we already have the info_map around where needed, just use it
instead of going through guc->ads_map.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-13-lucas.demarchi@intel.com
|
|
In the other places in this function, guc->ads_map is being protected
from access when it's not yet set. However the last check is actually
about guc->ads_golden_ctxt_size been set before. These checks should
always match as the size is initialized on the first call to
guc_prep_golden_context(), but it's clearer if we have a single return
and check for guc->ads_golden_ctxt_size.
This is just a readability improvement, no change in behavior.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-12-lucas.demarchi@intel.com
|
|
Use the saved ads_map to prepare the golden context. One difference from
the init context is that this function can be called before there is a
gem object (and thus the guc->ads_map) to calculare the size of the
golden context that should be allocated for that object.
So in this case the function needs to be prepared for not having the
system_info with enabled engines filled out. To accomplish that an
info_map is prepared on the side to point either to the gem object
or the local variable on the stack. This allows making
fill_engine_enable_masks() operate always with a iosys_map
argument.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-11-lucas.demarchi@intel.com
|
|
Use iosys_map_memset() to zero the private data as ADS may be either
on system or IO memory.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-10-lucas.demarchi@intel.com
|
|
Use iosys_map to read fields from the dma_blob so access to IO and
system memory is abstracted away.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood<matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-9-lucas.demarchi@intel.com
|
|
Use iosys_map to write the policies update so access to IO and system
memory is abstracted away.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-8-lucas.demarchi@intel.com
|
|
Now the map is saved during creation, so use it to initialize the
golden context, reading from shmem and writing to either system or IO
memory.
v2: Do not use a map iterator: add an offset to keep track of
destination
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-7-lucas.demarchi@intel.com
|
|
Add helpers on top of iosys_map_read_field() /
iosys_map_write_field() functions so they always use the right
arguments and make code easier to read.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-6-lucas.demarchi@intel.com
|
|
Convert intel_guc_ads_create() and initialization to use iosys_map
rather than plain pointer and save it in the guc struct. This will help
with additional updates to the ads_blob after the
creation/initialization by abstracting the IO vs system memory.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-5-lucas.demarchi@intel.com
|
|
Add a variant of shmem_read() that takes a iosys_map pointer rather
than a plain pointer as argument. It's mostly a copy __shmem_rw() but
adapting the api and removing the write support since there's currently
only need to use iosys_map as destination.
Reworking __shmem_rw() to share the implementation was tempting, but
finding a good balance between reuse and clarity pushed towards a little
code duplication. Since the function is small, just add the similar
function with a copy/paste/adapt approach.
v2: Add an offset as argument and instead of using a map iterator, use the
offset to keep track of where we are writing data to.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-4-lucas.demarchi@intel.com
|
|
Expose speedbin through MSM_PARAM_CHIP_ID parameter to help userspace
identify the sku.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20220226005021.v2.4.I86c32730e08cba9e5c83f02ec17885124d45fa56@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Add support for 7c3 SKU detection using speedbin fuse.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20220226005021.v2.3.I6e89c014eb17f090f716fba662bdd33073920804@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Use a gpu name which is sprintf'ed from the chipid for 7c3 gpu instead of
hardcoding one. This helps to avoid code churn in case of a gpu rename.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20220226005021.v2.2.I9436e0e300f76b2e6c34136a0b902e8cfd73e0d6@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Use generic name for resources like irq and kthread instead of hardware
specific name to make it easier to grep.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20220226005021.v2.1.Id3d2e7391192c86d0783aeb307d3f9fb61f9efee@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
BSPEC: 46123
v2: Address review feedback [MattR]
v3: move register definition to gt_regs [MattR]
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211052333.12306-1-clinton.a.taylor@intel.com
|
|
The omap KMS driver will call drm_plane_create_color_properties() with
a default encoding and range values of BT601 and Full Range,
respectively.
Since the initial value wasn't carried over in the state, the driver had
to set it again in omap_plane_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Reviewed-by: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-23-maxime@cerno.tech
|
|
The drm_plane_create_color_properties() function asks for an initial
value for the color encoding and range, and will set the associated
plane state variable with that value if a state is present.
However, that function is usually called at a time where there's no
state yet. Since the drm_plane_state reset helper doesn't take care of
reading that value when it's called, it means that in most cases the
initial value will be 0 (so DRM_COLOR_YCBCR_BT601 and
DRM_COLOR_YCBCR_LIMITED_RANGE, respectively), or the drivers will have
to work around it.
Let's add some code in __drm_atomic_helper_plane_state_reset() to get
the initial encoding and range value if the property has been attached
in order to fix this.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-19-maxime@cerno.tech
|
|
The sun4i KMS driver will call drm_plane_create_zpos_property() with an
init value depending on the plane type.
Since the initial value wasn't carried over in the state, the driver had
to set it again in sun4i_backend_layer_reset().
However, the helpers have been adjusted to set it properly at reset, so
this is not needed anymore.
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-18-maxime@cerno.tech
|
|
The sti KMS driver will call drm_plane_create_zpos_property() with an
init value depending on the plane type.
Since the initial value wasn't carried over in the state, the driver had
to set it again in sti_plane_reset().
However, the helpers have been adjusted to set it properly at reset, so
this is not needed anymore.
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-17-maxime@cerno.tech
|
|
The rcar-du KMS driver will call drm_plane_create_zpos_property() with an
init value depending on the plane type.
Since the initial value wasn't carried over in the state, the driver had
to set it again in rcar_du_plane_reset() and rcar_du_vsp_plane_reset().
However, the helpers have been adjusted to set it properly at reset, so
this is not needed anymore.
Cc: linux-renesas-soc@vger.kernel.org
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-16-maxime@cerno.tech
|
|
The omap KMS driver will call drm_plane_create_zpos_property() with an
init value of the plane index and the plane type.
Since the initial value wasn't carried over in the state, the driver had
to set it again in omap_plane_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Reviewed-by: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-15-maxime@cerno.tech
|
|
The nouveau KMS driver will call drm_plane_create_zpos_property() with
an init value depending on the plane purpose.
Since the initial value wasn't carried over in the state, the driver had
to set it again in nv50_wndw_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Cc: nouveau@lists.freedesktop.org
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-14-maxime@cerno.tech
|
|
The mdp KMS driver will call drm_plane_create_zpos_property() with an
init value depending on the plane purpose.
Since the initial value wasn't carried over in the state, the driver had
to set it again in mdp5_plane_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Cc: freedreno@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-13-maxime@cerno.tech
|
|
The drm_plane_create_zpos_property() function asks for an initial value,
and will set the associated plane state variable with that value if a
state is present.
However, that function is usually called at a time where there's no
state yet. Since the drm_plane_state reset helper doesn't take care of
reading that value when it's called, it means that in most cases the
initial value will be 0, or the drivers will have to work around it.
Let's add some code in __drm_atomic_helper_plane_state_reset() to get
the initial zpos value if the property has been attached in order to fix
this.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-8-maxime@cerno.tech
|
|
Some functions to create properties (drm_plane_create_zpos_property or
drm_plane_create_color_properties for example) will ask for a range of
acceptable value and an initial one.
This initial value is then stored in the values array for that property.
Let's provide an helper to access this property.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-7-maxime@cerno.tech
|
|
While the omap_plane_init() function calls
drm_plane_create_zpos_property() with an initial value of 0,
omap_plane_reset() will force it to another value depending on the plane
type.
Fix the discrepancy by setting the initial zpos value to the same value
in the drm_plane_create_zpos_property() call.
Reviewed-by: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-5-maxime@cerno.tech
|
|
this patch adds gfxoff support for smu 13.0.5
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Based on smu 13.0.5 features, refine pp table code.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Devices can also be child nodes when we also control that device
through the upstream device (ie, MIPI-DCS for a MIPI-DSI device).
drm_of_find_panel_or_bridge can lookup panel or bridge for a given
device has port and endpoint and it fails to lookup if the device
has a child nodes.
This patch add support to lookup for a child node of the given parent
that isn't either port or ports.
Example OF graph representation of DSI host, which has port but
not has ports and has child panel node.
dsi {
compatible = "allwinner,sun6i-a31-mipi-dsi";
#address-cells = <1>;
#size-cells = <0>;
port {
dsi_in_tcon0: endpoint {
remote-endpoint = <tcon0_out_dsi>;
};
panel@0 {
reg = <0>;
};
};
Example OF graph representation of DSI host, which has ports but
not has port and has child panel node.
dsi {
compatible = "samsung,exynos5433-mipi-dsi";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi_to_mic: endpoint {
remote-endpoint = <&mic_to_dsi>;
};
};
};
panel@0 {
reg = <0>;
};
};
Example OF graph representation of DSI host, which has neither a port
nor a ports but has child panel node.
dsi0 {
compatible = "ste,mcde-dsi";
#address-cells = <1>;
#size-cells = <0>;
panel@0 {
reg = <0>;
};
};
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202160414.16493-1-jagan@amarulasolutions.com
|
|
Someone on IRC once asked an innocent enough sounding question: Why
with xf86-video-modesetting is es2gears limited at 120fps.
So I broke out the perfetto tracing mesa MR and took a look. It turns
out the problem was drm_atomic_helper_dirtyfb(), which would end up
waiting for vblank.. es2gears would rapidly push two frames to Xorg,
which would blit them to screen and in idle hook (I assume) call the
DIRTYFB ioctl. Which in turn would do an atomic update to flush the
dirty rects, which would stall until the next vblank. And then the
whole process would repeat.
But this is a bit silly, we only need dirtyfb for command mode DSI
panels. So track in plane state whether dirtyfb is required, and
track in the fb how many attached planes require dirtyfb so that we
can skip it when not required. (Note, mdp4 does not actually have
cmd mode support.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220223191118.881321-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
When running the mock selftests we currently blow up with:
<6> [299.836278] i915: Running i915_gem_huge_page_mock_selftests/igt_mock_memory_region_huge_pages
<1> [299.836356] BUG: kernel NULL pointer dereference, address: 00000000000000c8
<1> [299.836361] #PF: supervisor read access in kernel mode
<1> [299.836364] #PF: error_code(0x0000) - not-present page
<6> [299.836367] PGD 0 P4D 0
<4> [299.836369] Oops: 0000 [#1] PREEMPT SMP NOPTI
<4> [299.836372] CPU: 1 PID: 1429 Comm: i915_selftest Tainted: G U 5.17.0-rc4-CI-CI_DRM_11227+ #1
<4> [299.836376] Hardware name: Intel(R) Client Systems NUC11TNHi5/NUC11TNBi5, BIOS TNTGL357.0042.2020.1221.1743 12/21/2020
<4> [299.836380] RIP: 0010:ttm_resource_init+0x57/0x90 [ttm]
<4> [299.836392] RSP: 0018:ffffc90001e4f680 EFLAGS: 00010203
<4> [299.836395] RAX: 0000000000000000 RBX: ffffc90001e4f708 RCX: 0000000000000000
<4> [299.836398] RDX: ffff888116172528 RSI: ffffc90001e4f6f8 RDI: 0000000000000000
<4> [299.836401] RBP: ffffc90001e4f6f8 R08: 00000000000001b0 R09: ffff888116172528
<4> [299.836403] R10: 0000000000000001 R11: 00000000a4cb2e51 R12: ffffc90001e4fa90
<4> [299.836406] R13: ffff888116172528 R14: ffff888130d7f4b0 R15: ffff888130d7f400
<4> [299.836409] FS: 00007ff241684500(0000) GS:ffff88849fe80000(0000) knlGS:0000000000000000
<4> [299.836412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [299.836416] CR2: 00000000000000c8 CR3: 0000000107b80001 CR4: 0000000000770ee0
<4> [299.836418] PKRU: 55555554
<4> [299.836420] Call Trace:
<4> [299.836422] <TASK>
<4> [299.836423] i915_ttm_buddy_man_alloc+0x68/0x240 [i915]
ttm_resource_init() now needs to access the bo->bdev, and also wants to
store the bo reference. Try to keep both working. The mock_bo is a hack
so we can interface directly with the ttm managers alloc() and free() hooks for
our mock testing, without invoking other TTM features like eviction,
moves, etc.
v2: make sure we only touch res->bo if the alloc() returns successfully
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5123
Fixes: 0e05fc49c358 ("drm/ttm: add common accounting to the resource mgr v3")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221121103.2473831-1-matthew.auld@intel.com
|
|
Fix the following coccicheck REVIEW:
./drivers/gpu/drm/tegra/dpaux.c:282:13-16 REVIEW Unneeded variable
Reported-by: Zeal Robot <zealci@zte.com.cm>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Matt needed some buddy allocator changes for landing DG2 small BAR
support patches.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Add check for zero usable stolen memory before calling drm_mm_init
to support configurations where stolen memory exists but is fully
reserved.
Also skip memory test in cases that usable stolen is smaller than
page size(amount mapped and used to test memory).
v2:
- skiping test if available memory is smaller than page size (Lucas)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Steve Carbonari <steven.carbonari@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223194946.725328-1-jose.souza@intel.com
|
|
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore. Add put_device() call to fix this.
Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This patch adds the CRC hashing feature supported by some recent hardware
versions of the LTDC. This is useful for test suite such as IGT-GPU-tools
[1] where a CRTC output frame can be compared to a test reference frame
thanks to their respective CRC hash.
[1] https://cgit.freedesktop.org/drm/igt-gpu-tools
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211104620.421177-1-raphael.gallais-pou@foss.st.com
|
|
Clang warns:
drivers/gpu/drm/stm/ltdc.c:625:2: warning: variable 'val' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/gpu/drm/stm/ltdc.c:635:2: note: uninitialized use occurs here
val |= LxPCR_YCEN;
^~~
drivers/gpu/drm/stm/ltdc.c:600:9: note: initialize the variable 'val' to silence this warning
u32 val;
^
= 0
1 warning generated.
Use a return instead of break in the default case to fix the warning.
Add an error message so that this return is not silent, which could hide
issues in the future.
Fixes: 484e72d3146b ("drm/stm: ltdc: add support of ycbcr pixel formats")
Link: https://github.com/ClangBuiltLinux/linux/issues/1575
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222152045.484610-1-nathan@kernel.org
|
|
Use the common release helper from component.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20220214060819.7334-19-yong.wu@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the common compare helper from component.
Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20220214060819.7334-18-yong.wu@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the common compare helper from component.
Cc: Tomi Valkeinen <tomba@kernel.org>
Cc: Cai Huoqing <caihuoqing@baidu.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20220214060819.7334-17-yong.wu@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the common compare helper from component.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20220214060819.7334-16-yong.wu@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
