Age | Commit message (Collapse) | Author |
|
For some reason we're flagging that we need to run through the
full modeset calculations (any_ms==true -> do cdclk/etc. checks)
if any crtc got initially flagged for a modeset and is not
enabled via the uapi. No idea why this is here since later on
(after all fastset handling) we do full run through the crtcs
and flag any_ms if anything still needs a full modeset. So let's
just throw out this early weirdo.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
|
|
Include hw.enable and pipe_mode in the crtc debugfs state dump.
These are fairly fundemental to the operation of the driver
so not seeing them leaves us in the dark.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
|
|
Let's just dump the "full" hw crtc state in debugs so that we can
see if some stale junk was left behind when the crtc is supposed
to be entirely off.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
|
|
|
|
The commit adding msm8998 support didn't added msm8998's DSPP blocks
configuration, but did not use them in msm8998_cfg_init(). Wire them up
to be used for display post processing.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 94391a14fc27 ("drm/msm/dpu1: Add MSM8998 to hw catalog")
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Cc: Jami Kettunen <jami.kettunen@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/475544/
Link: https://lore.kernel.org/r/20220222031948.228727-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
create a pot-sized mm, then allocate one of each possible
order within. This should leave the mm with exactly one
page left. Free the largest block, then whittle down again.
Eventually we will have a fully 50% fragmented mm.
v2(Matthew Auld):
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-7-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
- add a test to ascertain that the critical functionalities
of the program is working fine
- add a timeout helper function
v2:
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-6-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
create a pot-sized mm, then allocate one of each possible
order within. This should leave the mm with exactly one
page left.
v2:
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-5-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
create a mm with one block of each order available, and
try to allocate them all.
v2(Matthew Auld):
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-4-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
- add a test to check the range allocation
- export get_buddy() function in drm_buddy.c
- export drm_prandom_u32_max_state() in lib/drm_random.c
- include helper functions
- include prime number header file
v2:
- add drm_get_buddy() function description (Matthew Auld)
- removed unnecessary test succeeded print
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-3-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
add a test to check the maximum allocation limit
v2(Matthew Auld):
- added err = -EINVAL in block NULL check
- removed unnecessary test succeeded print
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
- move i915 buddy selftests into drm selftests folder
- add Makefile and Kconfig support
- add sanitycheck testcase
Prerequisites
- These series of selftests patches are created on top of
drm buddy series
- Enable kselftests for DRM as a module in .config
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
When we switch to dma_resv_wait_timeout() the returned type changes as
well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 89aae41d740f ("drm/radeon: use dma_resv_wait_timeout() instead of manually waiting")
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215600
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221110503.2803-1-christian.koenig@amd.com
|
|
Add device pointer so scheduler's printing can use
DRM_DEV_ERROR() instead, which makes life easier under multiple GPU
scenario.
v2: amend all calls of drm_sched_init()
v3: fill dev pointer for all drm_sched_init() calls
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095705.5290-1-Jiawei.Gu@amd.com
|
|
This reverts commit 9bc34b4d0f3cb368241684cc5e0445d435dded44.
Just oopses on most machines.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223081810.19917-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add the PCH ID for ADL-N.
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127103520.348015-1-tejaskumarx.surendrakumar.upadhyay@intel.com
|
|
Add compatibility for QCM2290 display subsystem, including
required entries in DPU hw catalog.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/474087/
Link: https://lore.kernel.org/r/1644852547-10067-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
QCM2290 MDSS includes a Qualcomm DSI controller v2.4.1. Since this
controller version is not SoC specific, and already assigned to sc7180
for auto configuration, we rely on DSI block specific compatible
string "qcom,dsi-ctrl-6g-qcm2290", and use the device's data to point
to the right dsi config handler.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/474088/
Link: https://lore.kernel.org/r/1644853060-12222-2-git-send-email-loic.poulain@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Config autodetect based on DSI controller version is quite limited
since several qcom SoCs can integrate a DSI controller with the same
version, but with different config (io_offset, supplies, etc).
This change allows to specify dsi config via device data pointer.
config autodetect is still used in case data pointer is NULL.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/474089/
Link: https://lore.kernel.org/r/1644853060-12222-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
in the DPCD. Currently the driver parses that onevery HPD but fails to reset
the corresponding VRR Capable Connector property.
Hence the userspace still sees this as VRR Capable panel which is incorrect.
Fix this by explicitly resetting the connector property.
v2: Reset vrr capable if status == connector_disconnected
v3: Use i915 and use bool vrr_capable (Jani Nikula)
v4: Move vrr_capable to after update modes call (Jani N)
Remove the redundant comment (Jan N)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215202601.22943-1-manasi.d.navare@intel.com
|
|
So we can tell which output goes to which device when multiple GPUs
are present. Also while we are here, convert DRM_ERROR to dev_info.
The error cases are not critical.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The driver has a fallback so make the message informational
rather than a warning. The driver has a fallback if the
Component Resource Association Table (CRAT) is missing, so
make this informational now.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1906
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Based on firmware team's input, harvest table in VBIOS does
not apply well to legacy products like Navi1x, so seperate
harvest mask configuration retrieve from different places.
On legacy GPUs, scan harvest bit per IP data stuctures,
while for newer ones, still read IP harvest info from harvest
table.
v2: squash in fix to limit it to specific skus (Guchun)
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There's always miss the SMU feature enabled checked in the NPI phase,
so let validate the SMU feature enable message directly rather than
add more and more MP1 version check.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Lijo Lazar <Lijo.Lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The TMZ is disabled by default and enable TMZ option
for the IP discovery based asic will help on the TMZ
function verification.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
vkms leverages common amdgpu framebuffer creation, and
also as it does not support FB modifier, there is no need
to check tiling flags when initing framebuffer when virtual
display is enabled.
This can fix below calltrace:
amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier
WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu]
v2: check adev->enable_virtual_display instead as vkms can be
enabled in bare metal as well.
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 4046afcebfc3c8c0dd5666c2671b2c192b344f78.
No need to support modifier in virtual kms, otherwise, in SRIOV
mode, when lanuching X server, set crtc will fail due to mismatch
between primary plane modifier and framebuffer modifier.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clang static analysis reports this problem
kfd_chardev.c:2327:2: warning: 1st function call argument
is an uninitialized value
kvfree(bo_privs);
^~~~~~~~~~~~~~~~
Make sure bo_buckets and bo_privs are initialized so freeing them in the
error handling code path will never result in undefined behaviour.
Fixes: 73fa13b6a511 ("drm/amdkfd: CRIU Implement KFD restore ioctl")
Reported-by: Tom Rix <trix@redhat.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When this was first implemented, overflows weren't expected in regular
operations, and tests weren't in place to cause said overflow. Now there
are cases where overflows occur with real workloads, but we know that
the kernel can handle this robustly, so move the message to a debug
message.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will ensure correct values for Gen12+ platforms.
v2: Rebase
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216181504.7155-1-vinay.belgaumkar@intel.com
|
|
SLPC unset param H2G only needs one parameter - the id of the
param.
Fixes: 025cb07bebfa ("drm/i915/guc/slpc: Cache platform frequency limits")
Suggested-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216181504.7155-1-vinay.belgaumkar@intel.com
|
|
We dont need to implement reset_domain in intel_engine
_setup(), but can be done as a helper. Implemented as
engine->reset_domain = get_reset_domain().
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217123223.748184-1-tejaskumarx.surendrakumar.upadhyay@intel.com
|
|
On contiguous allocation, we round up the size
to the *next* power of 2, implement a function
to free the unused pages after the newly allocate block.
v2(Matthew Auld):
- replace function name 'drm_buddy_free_unused_pages' with
drm_buddy_block_trim
- replace input argument name 'actual_size' with 'new_size'
- add more validation checks for input arguments
- add overlaps check to avoid needless searching and splitting
- merged the below patch to see the feature in action
- add free unused pages support to i915 driver
- lock drm_buddy_block_trim() function as it calls mark_free/mark_split
are all globally visible
v3(Matthew Auld):
- remove trim method error handling as we address the failure case
at drm_buddy_block_trim() function
v4:
- in case of trim, at __alloc_range() split_block failure path
marks the block as free and removes it from the original list,
potentially also freeing it, to overcome this problem, we turn
the drm_buddy_block_trim() input node into a temporary node to
prevent recursively freeing itself, but still retain the
un-splitting/freeing of the other nodes(Matthew Auld)
- modify the drm_buddy_block_trim() function return type
v5(Matthew Auld):
- revert drm_buddy_block_trim() function return type changes in v4
- modify drm_buddy_block_trim() passing argument n_pages to original_size
as n_pages has already been rounded up to the next power-of-two and
passing n_pages results noop
v6:
- fix warnings reported by kernel test robot <lkp@intel.com>
v7:
- modify drm_buddy_block_trim() function doc description
- at drm_buddy_block_trim() handle non-allocated block as
a serious programmer error
- fix a typo
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221164552.2434-3-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Implemented a function which walk through the order list,
compares the offset and returns the maximum offset block,
this method is unpredictable in obtaining the high range
address blocks which depends on allocation and deallocation.
for instance, if driver requests address at a low specific
range, allocator traverses from the root block and splits
the larger blocks until it reaches the specific block and
in the process of splitting, lower orders in the freelist
are occupied with low range address blocks and for the
subsequent TOPDOWN memory request we may return the low
range blocks.To overcome this issue, we may go with the
below approach.
The other approach, sorting each order list entries in
ascending order and compares the last entry of each
order list in the freelist and return the max block.
This creates sorting overhead on every drm_buddy_free()
request and split up of larger blocks for a single page
request.
v2:
- Fix alignment issues(Matthew Auld)
- Remove unnecessary list_empty check(Matthew Auld)
- merged the below patch to see the feature in action
- add top-down alloc support to i915 driver
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221164552.2434-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
- Make drm_buddy_alloc a single function to handle
range allocation and non-range allocation demands
- Implemented a new function alloc_range() which allocates
the requested power-of-two block comply with range limitations
- Moved order computation and memory alignment logic from
i915 driver to drm buddy
v2:
merged below changes to keep the build unbroken
- drm_buddy_alloc_range() becomes obsolete and may be removed
- enable ttm range allocation (fpfn / lpfn) support in i915 driver
- apply enhanced drm_buddy_alloc() function to i915 driver
v3(Matthew Auld):
- Fix alignment issues and remove unnecessary list_empty check
- add more validation checks for input arguments
- make alloc_range() block allocations as bottom-up
- optimize order computation logic
- replace uint64_t with u64, which is preferred in the kernel
v4(Matthew Auld):
- keep drm_buddy_alloc_range() function implementation for generic
actual range allocations
- keep alloc_range() implementation for end bias allocations
v5(Matthew Auld):
- modify drm_buddy_alloc() passing argument place->lpfn to lpfn
as place->lpfn will currently always be zero for i915
v6(Matthew Auld):
- fixup potential uaf - If we are unlucky and can't allocate
enough memory when splitting blocks, where we temporarily
end up with the given block and its buddy on the respective
free list, then we need to ensure we delete both blocks,
and no just the buddy, before potentially freeing them
- fix warnings reported by kernel test robot <lkp@intel.com>
v7(Matthew Auld):
- revert fixup potential uaf
- keep __alloc_range() add node to the list logic same as
drm_buddy_alloc_blocks() by having a temporary list variable
- at drm_buddy_alloc_blocks() keep i915 range_overflows macro
and add a new check for end variable
v8:
- fix warnings reported by kernel test robot <lkp@intel.com>
v9(Matthew Auld):
- remove DRM_BUDDY_RANGE_ALLOCATION flag
- remove unnecessary function description
v10:
- keep DRM_BUDDY_RANGE_ALLOCATION flag as removing the flag
and replacing with (end < size) logic fails amdgpu driver load
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221164552.2434-1-Arunpravin.PaneerSelvam@amd.com
|
|
Even if PSR is allowed for a present GPU, there might be no eDP link
which supports PSR.
Fixes: 708978487304 ("drm/amdgpu/display: Only set vblank_disable_immediate when PSR is not enabled")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a quirk in sienna_cichlid_ppt.c to fix some OEM SKU
specific stability issues.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
MMHUB PG needs to be disabled for Picasso for stability reasons.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
For DCN3/3.01/3.02 at least these use the fpu.
v2: squash in build fix for when DCN is not enabled (Leo)
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add display workaround # 1309179469 , which fixes a PHY hang when
switching from TBT mode to DP-alt/legacy mode. The workaround also
requires an IFWI/PHY firmware change, before that this change has no
effect (the DKL_PCS_DW5/SOFTRESET flag is always cleared).
HSDES: 18018237866
HSDES: 16014473319
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218122611.767974-1-imre.deak@intel.com
|
|
Always use forward declarations instead of includes in headers if
possible.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214173644.2097124-1-jani.nikula@intel.com
|
|
The ICL DSI registers have fairly isolated usage. Split the register
macros to a separate file.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-4-jani.nikula@intel.com
|
|
The VLV (including CHV, BXT, and GLK) DSI registers have fairly isolated
usage. Split the register macros to separated files.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-3-jani.nikula@intel.com
|
|
Having a separate definition will be useful for splitting VLV and ICL
register files.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-2-jani.nikula@intel.com
|
|
The VBT DSI video transfer mode field values have been defined in terms
of the VLV MIPI_VIDEO_MODE_FORMAT register. The ICL DSI code maps that
to ICL DSI_TRANS_FUNC_CONF() register. The values are the same, though
the shift is different.
Make a clean break and disassociate the values from each other. Assume
the values can be different, and translate the VBT value to VLV and ICL
register values as needed. Use the existing macros from intel_bios.h.
This will be useful in splitting the DSI register macros to files by DSI
implementation.
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-1-jani.nikula@intel.com
|
|
We need to use phy_name() to convert the PHY value into a human-readable
character in the error message.
Fixes: a6a128116e55 ("drm/i915/dg2: Wait for SNPS PHY calibration during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215163545.2175730-1-matthew.d.roper@intel.com
(cherry picked from commit 84073e568eec7b586b2f6fd5fb2fb08f59edec54)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
If the only thing that is changing is SAGV vs. no SAGV but
the number of active planes and the total data rates end up
unchanged we currently bail out of intel_bw_atomic_check()
early and forget to actually compute the new WGV point
mask and thus won't actually enable/disable SAGV as requested.
This ends up poorly if we end up running with SAGV enabled
when we shouldn't. Usually ends up in underruns.
To fix this let's go through the QGV point mask computation
if either the data rates/number of planes, or the state
of SAGV is changing.
v2: Check more carefully if things are changing to avoid
the extra calculations/debugs from introducing unwanted
overhead
Cc: stable@vger.kernel.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
Fixes: 20f505f22531 ("drm/i915: Restrict qgv points which don't have enough bandwidth.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-3-ville.syrjala@linux.intel.com
(cherry picked from commit 6b728595ffa51c087343c716bccbfc260f120e72)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
When changing between SAGV vs. no SAGV on tgl+ we have to
update the use_sagv_wm flag for all the crtcs or else
an active pipe not already in the state will end up using
the wrong watermarks. That is especially bad when we end up
with the tighter non-SAGV watermarks with SAGV enabled.
Usually ends up in underruns.
Cc: stable@vger.kernel.org
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 7241c57d3140 ("drm/i915: Add TGL+ SAGV support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-2-ville.syrjala@linux.intel.com
(cherry picked from commit 8dd8ffb824ca7b897ce9f2082ffa7e64831c22dc)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
BIOS may leave a TypeC PHY in a connected state even though the
corresponding port is disabled. This will prevent any hotplug events
from being signalled (after the monitor deasserts and then reasserts its
HPD) until the PHY is disconnected and so the driver will not detect a
connected sink. Rebooting with the PHY in the connected state also
results in a system hang.
Fix the above by disconnecting TypeC PHYs on disabled ports.
Before commit 64851a32c463e5 the PHY connected state was read out even
for disabled ports and later the PHY got disconnected as a side effect
of a tc_port_lock/unlock() sequence (during connector probing), hence
recovering the port's hotplug functionality.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014
Fixes: 64851a32c463 ("drm/i915/tc: Add a mode for the TypeC PHY's disconnected state")
Cc: <stable@vger.kernel.org> # v5.16+
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217152237.670220-1-imre.deak@intel.com
(cherry picked from commit ed0ccf349ffd9c80e7376d4d8c608643de990e86)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|