Age | Commit message (Collapse) | Author |
|
https://github.com/markyzq/kernel-drm-rockchip into drm-next
Use iommu for rockchip arm64 platform.
* 'drm-rockchip-next-2017-02-16' of https://github.com/markyzq/kernel-drm-rockchip:
drm/rockchip: Use common IOMMU API to attach devices
drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain
|
|
git://anongit.freedesktop.org/git/drm-misc into drm-next
Fixes for the v4.11 merge window.
* tag 'drm-misc-next-fixes-2017-02-15' of git://anongit.freedesktop.org/git/drm-misc:
drm: Resurrect atomic rmfb code, v3
uapi: add missing install of dma-buf.h
|
|
This was somehow lost between v3 and the merged version in Maarten's
patch merged as:
commit f2d580b9a8149735cbc4b59c4a8df60173658140
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed May 4 14:38:26 2016 +0200
drm/core: Do not preserve framebuffer on rmfb, v4.
This introduces a slight behavioral change to rmfb. Instead of
disabling a crtc when the primary plane is disabled, we try to
preserve it.
Apart from old versions of the vmwgfx xorg driver, there is
nothing depending on rmfb disabling a crtc. Since vmwgfx is
a legacy driver we can safely only disable the plane with atomic.
If this commit is rejected by the driver then we will still fall
back to the old behavior and turn off the crtc.
v2:
- Remove plane->fb assignment, done by drm_atomic_clean_old_fb.
- Add WARN_ON when atomic_remove_fb fails.
- Always call drm_atomic_state_put.
v3:
- Use drm_drv_uses_atomic_modeset
- Handle the case where the first plane-disable-only commit fails
with -EINVAL. Some drivers do not support this, fall back to
disabling all crtc's in this case.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/66fc3da5-697b-1613-0a67-a5293209f0dc@linux.intel.com
|
|
100% reproducible issue found on SKL SkullCanyon NUC with two external
DP daisy-chained monitors in DP/MST mode. When turning off or changing
the input of the second monitor the machine stops with a kernel
oops. This issue happened with 4.8.8 as well as drm/drm-intel-nightly.
This issue is traced to an inconsistent control flow in
drm_dp_update_payload_part1(): the 'port' pointer is set to NULL at the
same time as 'req_payload.num_slots' is set to zero, but the pointer is
dereferenced even when req_payload.num_slot is zero.
The problematic dereference was introduced in commit dfda0df34
("drm/mst: rework payload table allocation to conform better") and may
impact all versions since v3.18
The fix suggested by Chris Wilson removes the kernel oops and was found to
work well after 10mn of monkey-testing with the second monitor power and
input buttons
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98990
Fixes: dfda0df34264 ("drm/mst: rework payload table allocation to conform better.")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v3.18+
Tested-by: Nathan D Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487076561-2169-1-git-send-email-jani.nikula@intel.com
|
|
Rockchip DRM used the arm special API, arm_iommu_*(), to attach
iommu for ARM32 SoCs. This patch convert to common iommu API
so it would support ARM64 like RK3399.
Since previous patch added support for direct IOMMU address space
management, there is no need to use DMA API anymore and this patch wires
things to use the new method.
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
|
|
The API is not suitable for subsystems consisting of multiple devices
and requires severe hacks to use it. To mitigate this, this patch
implements allocation and address space management locally by using
helpers provided by DRM framework, like other DRM drivers do, e.g.
Tegra.
This patch should not introduce any functional changes until the driver
is made to attach subdevices into an IOMMU domain with the generic IOMMU
API, which will happen in following patch. Based heavily on GEM
implementation of Tegra DRM driver.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: rjan Eide <orjan.eide@arm.com>
|
|
When doing dma map failed for a pfn, kvmgt should unpin the
pfn and return error code to device module driver
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: xinda.zhao@intel.com
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
For the inhibit ctx, load all mmio in render mmio list
into HW by MMIO write for ctx initialization.
For the none-inhibit ctx, only load the render mmio which
is not in_context into HW by MMIO write. Skip the MMIO write
for in_context mmio as context image will load it.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
* Add flip done event support for sprite plane on SKL platform.
* Fix bug #1452, "Call Trace:handle_default_event_virt+0xef/0x100
[i915]" while booting up guest.
Signed-off-by: Xu Han <xu.han@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
We also need reset vGPU virtual display emulation. Since all vreg has
been cleared, we need reset display related vreg to reflect our display
setting.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
We need to be careful to only update addr mode for gvt shadow context
descriptor but keep other valid config. This fixes GPU hang caused by
invalid descriptor submitted for gvt workload.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
We need to properly setup alignment for GTT start/end/size
as required. Fixed warning from i915 gem.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
It is a relatively common idiom (8 instances) to first look up an IDR
entry, and then remove it from the tree if it is found, possibly doing
further operations upon the entry afterwards. If we change idr_remove()
to return the removed object, all of these users can save themselves a
walk of the IDR tree.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
|
|
Initialized PIPE_ORDER_TS0/1/2/3 field of SPI_ARB_PRIORITY register to 2.
This set the pipe priority order to:
02 - HP3D, CS_H, GFX, CS_M, CS_L
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a bit needed during initialization into the driver, where it is supposed
to be. Currently, this is happening in the VCE firmware, and although
functional, this is the correct place to perform this initialization.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alan Harrison <Alan.Harrison@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Don't update display bandwidth on headless asics.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=99387
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This removes code duplication.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add cases for asics with 3 and 5 crtcs. Fixes an artificial
limitation on asics with 3 or 5 crtcs.
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=99744
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
In function dispatch_workload(), if it fail before calling
intel_gvt_scan_and_shadow_wa_ctx(), the indirect ctx will
not be shadowed so no cleaup need. wa_ctx->indirect_ctx.obj
indicate whether indirect_ctx is shadowed. The obj is null
if it is unshadowed.
BUG: unable to handle kernel NULL pointer dereference at
00000000000001a0
IP: complete_execlist_workload+0x2c9/0x3e0 [i915]
Oops: 0002 [#1] SMP
task: ffff939546d2d880 task.stack: ffffbd9b82ac4000
RIP: 0010:complete_execlist_workload+0x2c9/0x3e0 [i915]
RSP: 0018:ffffbd9b82ac7dd8 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff9393c725b540 RCX: 0000000000000006
RDX: 0000000000000007 RSI: 0000000000000202 RDI: ffff939559c8dd00
RBP: ffffbd9b82ac7e18 R08: 0000000000000001 R09: 000000000120dd8f
R10: 0000000000000000 R11: 000000000120dd8f R12: ffff9393c725b540
R13: ffff9393c725b618 R14: ffffbd9b81f0d000 R15: ffff939520e0e000
FS: 0000000000000000(0000) GS:ffff939559c80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000001a0 CR3: 000000043d664000 CR4: 00000000003426e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
workload_thread+0x312/0xd70 [i915]
? __wake_up_sync+0x20/0x20
? wake_atomic_t_function+0x60/0x60
kthread+0x101/0x140
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Reset the fps debug information when 'fps_show' is updated.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
|
|
Remove the hdmi_mode_property and use drm_detect_hdmi_monitor function
to check whether the connected monitor is HDMI capable or DVI only.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
|
|
Unbind all the components when the STI driver is unregistered.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
|
|
Do not process update requests with unmodified parameters.
This typically happens when the driver is called with legacy
(non-atomic) IOCTL : in that case atomic_update() is called multiple
times with the same parameters.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
|
|
Fix a division by 0 case : in some cases, when the GDP plane is being
disabled atomic_check() is called with "mode->clock = 0".
In that case, do not set parent and pixel clock rate.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
|
|
Set gdp pix clock rate and parent in atomic_check function and enable
it in the atomic_update only the first time.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
|
|
stih416 chip family is no more supported in Linux v4.9.
It is then useless to keep vtg slave field since it not used at all for
the stih407/10 chip family supported by sti driver.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
|
|
stih416 chip family is no more supported in Linux v4.9.
Then sink_term config becomes useless. The field of the
register it was referring to is tag as reserved for stih410
chip family.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
|
|
Fix a division by 0 case : in some cases, when the HQVDP plane is being
disabled atomic_check() is called with "mode->clock = 0".
In that case, do not check for scaling capabilities.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
|
|
Use drm-core to handle event.
This is required to be able to use the nonblocking helpers.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
|
|
Since nonblocking atomic commits are now supported, the driver can
now use drm_atomic_helper_commit().
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
|
|
git://anongit.freedesktop.org/git/drm-intel into drm-fixes
Hopefully final fixes for v4.10, about half of them stable material.
* tag 'drm-intel-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Always convert incoming exec offsets to non-canonical
drm/i915: Remove overzealous fence warn on runtime suspend
drm/i915/bxt: Add MST support when do DPLL calculation
drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo
drm/i915: fix i915 running as dom0 under Xen
drm/i915: Flush untouched framebuffers before display on !llc
drm/i915: fix use-after-free in page_flip_completed()
|
|
git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Last-minute vc4 fix for 4.10.
* tag 'drm-misc-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc:
drm: vc4: adapt to new behaviour of drm_crtc.c
|
|
into drm-next
Some additional fixes for 4.11. Delayed a bit due to Chinese New Year. Highlights:
- Powerplay fixes
- VCE and UVD powergating fixes
- Clean up amdgpu SI gfx code to match CI and VI
- Misc bug fixes
* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (30 commits)
drm/amdgpu: report the number of bytes moved at buffer creation
drm/amdgpu: fix a potential deadlock in amdgpu_bo_create_restricted()
drm/amdgpu: add support for new smc firmware on polaris
drm/amd/powerplay: refine code to avoid potential bug that the memory not cleared.
drm/amdgpu: shut up #warning for compile testing
drm/amdgpu/virt: fix double kfree on bo_va
drm/radeon: remove some dead code
drm/radeon: avoid kernel segfault in vce when gpu fails to resume
drm/amd/powerplay: set fan speed to max in profile peak mode only.
drm/amd/gfx6: update gb_addr_config
drm/amdgpu: update HAINAN_GB_ADDR_CONFIG_GOLDEN
drm/amdgpu: update VERDE_GB_ADDR_CONFIG_GOLDEN
drm/amdgpu: refine si_read_register
drm/amdgpu/gfx6: clean up spi configuration
drm/amdgpu/gfx6: clean up cu configuration
drm/amdgpu/gfx6: clean up rb configuration
drm/amdgpu: refine vce3.0 code and related powerplay pg code.
drm/amdgpu: move subfunctions to the front of vce_v2_0.c.
drm/amdgpu: enable vce pg feature on Kv.
drm/amdgpu: refine code for VCE2.0 and related dpm code.
...
|
|
http://git.agner.ch/git/linux-drm-fsl-dcu into drm-next
two minor fixes.
* tag 'drm-fsl-dcu-for-v4.11' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: check for clk_prepare_enable() error
drm/fsl-dcu: remove unneeded 'ret' assignment
|
|
git://anongit.freedesktop.org/git/drm-misc into drm-next
Just 3 bugfixes for 4.11 merge window:
- fbdev module unload oops fix from Chris
- patch from Dan that look really dangers, better safe than sorry
* tag 'drm-misc-next-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc:
drm/atomic: fix an error code in mode_fixup()
drm: Cancel drm_fb_helper_resume_work on unload
drm: Cancel drm_fb_helper_dirty_work on unload
|
|
Like ttm_bo_validate(), ttm_bo_init() might need to move BO and
the number of bytes moved by TTM should be reported. This can help
the throttle buffer migration mechanism to make a better decision.
v2: fix computation
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When ttm_bo_init() fails, the reservation mutex should be unlocked.
In debug build, the kernel reported "possible recursive locking
detected" in this codepath. For debugging purposes, I also added
a "WARN_ON(ww_mutex_is_locked())" when ttm_bo_init() fails and the
mutex was locked as expected.
This should fix (random) GPU hangs. The easy way to reproduce the
issue is to change the "Super Sampling" option from 1.0 to 2.0 in
Hitman. It will create a huge buffer, evict a bunch of buffers
(around ~5k) and deadlock.
This regression has been introduced pretty recently.
v2: only release the mutex if resv is NULL
Fixes: 12a852219583 ("drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some polaris variants require new smc firmware.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
cleared.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gvt driver has a check which doesn't allow to use gvt when host
gpu iommu is enabled. This check can be removed after enable the
iommu support in gvt
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
When host i915 iommu enabled, gvt needs to use a mapped pfn in PTE entry
So before kvm returns the pfn, map this pfn and return the mapped address
which is so called iova.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
MFN usually refers to "Machine Frame Number" in virtulization world.
Currently GVT-g populates the shadow PPGTT/GGTT page table with MFN
according to the translation between MFN and Guest PFN.
When host IOMMU is enabled, GPU DMA transactions go through the IOMMU,
GPU needs an IOVA<->MFN mapping to walk the shadow page table in host
main memory.
This patch will map a page in IOMMU page table before using it in shadow
page table and release the map when a shadow page is going to be freed.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Reduce the line of logs in below functions and log friendly.
o intel_vgpu_reg_imr_handler
o intel_vgpu_reg_master_irq_handler
o intel_vgpu_reg_ier_handler
o intel_vgpu_reg_iir_handler
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Remove a redundant end of line in below log.
'will complete workload %p\n, status: %d\n'
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Remove below unimportant log which is too noisy.
'no current vgpu search from q head'
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
My randconfig tests on linux-next showed a newly introduced warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c: In function 'amdgpu_bo_create_restricted':
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:377:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp]
Generally speaking, warnings about bad kernel configuration are not particularly
helpful. We could enforce the selection of X86_PAT through Kconfig, so the driver
cannot even be used unless it is enabled, or we could just rely on the runtime
warning that is also there.
In this version, I'm making the warning conditional on CONFIG_COMPILE_TEST, which
shuts it up for me, but not people that may actually want to run the kernel
as a compromize.
Fixes: a2e2f29970aa ("drm/amdgpu: Bring bo creation in line with radeon driver (v2)")
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
bo_va is being kfree'd twice, once in the call to amdgpu_vm_bo_rmv
and then a short while later. Fix this double free by removing
the 2nd kfree.
Detected by CoverityScan, CID#1399524 ("Double Free")
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If "rdev->bios" is NULL then we don't need to free it.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When GPU fails to resume we can not trust that value we write to GPU
memory will post and we might get garbage (more like 0xffffffff on
x86) when reading them back. This trigger out of range memory access
in the kernel inside the vce resume code path.
This patch use canonical value to compute offset instead of reading
back value from GPU memory.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|