summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2020-07-01drm/amd/display: Update DCN3 bounding boxAlvin Lee
[Why] We want to update the bounding box to have more granular control of the DCFCLK. [How] Setup DCFCLK to use STA values and also optimal values based on UCLK. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu: remove distinction between explicit and implicit sync (v2)Christian König
According to Marek a pipeline sync should be inserted for implicit syncs well. v2: bump the driver version Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/amdgpu: Fix offset for SQ_DEBUG_STS_GLOBAL on gfx10 (v2)Tom St Denis
Despite having different IP offsets the computed address of the register(s) are the same between gfx7..gfx10. This patch fixes the offset relative to the GC block on gfx10. (v2): SQ_DEBUG_STS_GLOBAL2 is 0x10 higher ... Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/radeon: Fix reference count leaks caused by pm_runtime_get_syncAditya Pakki
On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu/display: fix ref count leak when pm_runtime_get_sync failsNavid Emamdoost
The call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_configNavid Emamdoost
in amdgpu_display_crtc_set_config, the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: fix ref count leak in amdgpu_drm_ioctlNavid Emamdoost
in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu: fix ref count leak in amdgpu_driver_open_kmsNavid Emamdoost
in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/radeon: fix multiple reference count leakAditya Pakki
On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu/gfx9: Fix incorrect firmware size calculationLei Guo
[WHY] The memcpy() function copies n bytes from memory area src to memory area dest. So specify the firmware size in bytes. [How] Correct the calculation. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Lei Guo <raykwok1150@163.com> Reviewed-by: Junwei Zhang <zjunweihit@163.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu: fix documentation around busy_percentageAlex Deucher
Add rename the gpu busy percentage for consistency and add the mem busy percentage documentation. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu/pm: update comment to clarify Overdrive interfacesAlex Deucher
Vega10 and previous asics use one interface, vega20 and newer use another. Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdkfd: Fix reference count leaks.Qiushi Wu
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdkfd: Add eviction debug messagesFelix Kuehling
Use WARN to print messages with backtrace when evictions are triggered. This can help determine the root cause of evictions and help spot driver bugs triggering evictions unintentionally, or help with performance tuning by avoiding conditions that cause evictions in a specific workload. The messages are controlled by a new module parameter that can be changed at runtime: echo Y > /sys/module/amdgpu/parameters/debug_evictions echo N > /sys/module/amdgpu/parameters/debug_evictions Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/amdgpu: Fix SQ_DEBUG_STS_GLOBAL* registersTom St Denis
Forgot to subtract the SOC15 IP offsetand add the BASE_IDX values. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Get num_chans from VBIOS tableAlvin Lee
Get the values from VBIOS table Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd: add missing fill of the array`s first elementBernard Zhao
In function fill_iram_v_2, the ram_table->bright_neg_gain`s first element [0][0] seems to be missing. This change is just to make the code a bit readable. Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu: Reconfigure ULV for gfx9 server SKUsJoseph Greathouse
SDMA ULV can benefit low-power modes, but can sometimes cause latency increases in small SDMA transfers. Server SKUs have a different trade-off space in this domain, so this configures the server SKUs' ULV hysteresis times differently than consumer SKUs'. Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdkfd: Use correct major in devcgroup checkLorenz Brun
The existing code used the major version number of the DRM driver instead of the device major number of the DRM subsystem for validating access for a devices cgroup. This meant that accesses allowed by the devices cgroup weren't permitted and certain accesses denied by the devices cgroup were permitted (if they matched the wrong major device number). Signed-off-by: Lorenz Brun <lorenz@brun.one> Fixes: 6b855f7b83d2f ("drm/amdkfd: Check against device cgroup") Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: 3.2.89Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.15Anthony Koo
[Header Changes] - Add new initialization bits for driver to check firmware status - Add command for HW locking via DMUB Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Not doing bios data pack.Yongqiang Sun
[Why] dmub FW running abnormal after resume from S0i3 due to data aliagnment issue. [How] Before having a solution for this issue, temparory not doing data pack. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: not reset dmub in driver.Yongqiang Sun
[Why] during S0i3, set power state is toggled a few times, and dmub uC will restart with current reset/hw_init. [How] Remove reset in set power state, and before doing hw_init, check if dmub is enabled, and doing FW autoload check only if dmub is already enabled. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Disable pipe split for modes with bordersDale Zhao
[Why] For some special timing with border, like DMT 640*480 72Hz, pipe split can't handle well. Thus, it will be black screen for these special timing. [How] Disable pipe split for these timing with borders as W/A. Signed-off-by: Dale Zhao <dale.zhao@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: change global buffer to local bufferLewis Huang
[Why] Multi-adapter calculate regamma table at the same time. Two thread used the same global variable cause race condition. [How] Change global buffer to local buffer Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Improve DisplayPort monitor interopAric Cyr
[Why] DC is very fast at link training and stream enablement which causes issues such as blackscreens for non-compliant monitors. [How] After debugging with scaler vendors we implement the minimum delays at the necessary locations to ensure the monitor does not hang. Delays are generic due to lack of IEEE OUI information on the failing displays. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Enable use of dmub iff dmcu is disabledAurabindo Pillai
[Why & How] DMUB command table should be allowed to be used only if dmcu is explicitly disabled. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: make calculate watermarks a function pointerDmytro Laktyushkin
To allow code reuse with minimal duplication watermark calculation needs to be function pointer. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add helper to convert DC statusRodrigo Siqueira
During the debugging process related to a hot-plug problem with 4k display, we realized that we had some issues related to the global state validation. This problem was not explicitly highlighted in the dmesg log, for this reason, this commit adds a function that converts `enum dc_status` to a human-readable string and appends the proper warning message in case of failure. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: add support for per-state dummy-pstate latencyJun Lei
[why] Dummy pstate latency actually varies between different UCLK frequencies, when calculating watermark C, if DAL always assumes worst case, then it can lead to dummy pstate not supported scenarios. [how] Rather than statically calculating dummy pstate using worst case, we store the entire table of UCLK to dummy pstate relationships. On a per mode basis, we calculate the actual UCLK lower limit, and use the dynamic worst case dummy pstate latency. This prevents the situation where we don't support full p-state (which will force high DPM), but still use low DPM dummy pstate latency. Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Revert "DP link layer test 4.2.1.1 fix due to specs update"Wenjing Liu
[why] The change causes some regression in a common use case. Will need more investigation before fixing the original issue. [how] This reverts commit fb8cf277b16d3f8b16941d217f7bae4ed7e73bea. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: remove unnecessary mpcc updatesDmytro Laktyushkin
We were updating mpcc if there were tree changes which is unnecessary since any mpcc being added or removed will automatically update the tree. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: runtime select dmub emulatior.Yongqiang Sun
[Why & How] Add emul specific hw function to dmub, in case of emulator is created, we can runtime switch between dmub emulator or dmub uC via is_virtual flag in dmub. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Passing initial SDP deadline to dmubpo-tchen
[Why] The SDP deadline indicate the vertical time to send CRC infopacket in PSR. Signed-off-by: po-tchen <po-ting.chen@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Force delay after DP receive power upMartin Tsai
[Why] Some sprcified monitor scalar cannot recognize timing change on demand. Once the link phy disable and enable during a short period then the Sink protection mechanism could keep the screen in blank and cannot be recoverred. [How] To add 100ms delay between enable link phy and link training. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: 3.2.88Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.14Anthony Koo
[Header Changes] - Add SDP transmission deadline for PSR config cmd Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: update audio wall clock programmingCharlene Liu
[why] for audio on real TV issue. [how] -add wall clock programming for DPREF based when Pixel clock is done by DP DTO. Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fix VBA chroma calculation for pipe splittingNicholas Kazlauskas
[Why] DML failures occur for 420 modes with dynamic pipe splitting enabled because the ChromaViewport exceeds the ChromaSurfaceWidth. This is caused by adding the viewport_width instead of the viewport_width_c. This similarly occurs for rotated modes due to the use of viewport_height instead of viewport_height_c. [How] Correct the calculations. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Revert "enable plane if plane_status changed"Hugo Hu
This reverts commmit fd0293dd5b68a67a8731d54a6b334945e4e95757. Signed-off-by: Hugo Hu <hugo.hu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Remove unused macro from dcn21Roman Li
[Why] SOC_BOUNDING_BOX_VALID is unused and not required for dcn21. [How] Remove it. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Use u16 for drm_bpp in DSC calculationsNicholas Kazlauskas
[Why] DSC calculations fail because the u16 bits_per_pixel from the DRM struct is being casted to the u8 drm_bpp parameters and locals. Integer wraparound is happening because this value is greater than 255. [How] Use u16 to match what's in the structure instead of u8. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Move call to disable DPGWesley Chalmers
[WHY] Disabling DPG should happen after setting watermarks and clocks Signed-off-by: Wesley Chalmers <wchalmer@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.13Anthony Koo
[Header Changes] - Version bump to 1.0.13 Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fix incorrect dcn1 bandwidth calculationsMichael Strauss
[WHY] Typos cause bandwidth calculation errors, one of which can cause infinite loop on dcn1 with eDP Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Rework dsc to isolate FPU operationsRodrigo Siqueira
When we want to use float point operation on Linux we need to use within special kernel protection (`kernel_fpu_{begin,end}()`.), otherwise the kernel can clobber userspace FPU register state. For detecting these issues we use a tool named objtool (with -Ffa flags) to highlight the FPU problems, all warnings can be summed up as follows: ./tools/objtool/objtool check -Ffa drivers/gpu/drm/amd/display/dc/dml/dml_common_defs.o [..] dc/dsc/rc_calc.o: warning: objtool: get_qp_set()+0x2f8: FPU instruction outside of kernel_fpu_{begin,end}() [..] dc/dsc/rc_calc.o: warning: objtool: dsc_roundf()+0x5: FPU instruction outside of kernel_fpu_{begin,end}() [..] dc/dsc/rc_calc.o: warning: objtool: dsc_ceil()+0x5: FPU instruction outside of kernel_fpu_{begin,end}() [..] dc/dsc/rc_calc.o: warning: objtool: get_ofs_set()+0x3eb: FPU instruction outside of kernel_fpu_{begin,end}() [..] dc/dsc/rc_calc.o: warning: objtool: calc_rc_params()+0x3c: FPU instruction outside of kernel_fpu_{begin,end}() [..] dc/dsc/dc_dsc.o: warning: objtool: get_dsc_bandwidth_range.isra.0()+0x8d: FPU instruction outside of kernel_fpu_{begin,end}() [..] dc/dsc/dc_dsc.o: warning: objtool: setup_dsc_config()+0x2ef: FPU instruction outside of kernel_fpu_{begin,end}() [..] dc/dsc/rc_calc_dpi.o: warning: objtool:copy_pps_fields()+0xbb: FPU instruction outside of kernel_fpu_{begin,end}() [..] dc/dsc/rc_calc_dpi.o: warning: objtool: dscc_compute_dsc_parameters()+0x7b: FPU instruction outside of kernel_fpu_{begin,end}() This commit fixes the above issues by rework DSC as described: 1. Isolate all FPU operations in a single file; 2. Use FPU flags only in the file that handles FPU operations; 3. Isolate all functions that require float point operation in static functions; 4. Add a mid-layer function that does not use any float point operation, and that could be safely invoked in other parts of the code. 5. Keep float point operation under DC_FP_{START/END} macro. CC: Christian König <christian.koenig@amd.com> CC: Alexander Deucher <Alexander.Deucher@amd.com> CC: Peter Zijlstra <peterz@infradead.org> CC: Tony Cheng <tony.cheng@amd.com> CC: Harry Wentland <hwentlan@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: correct alpha_en programming for new pixel formatCharlene Liu
[why] for following new format, no alpha SURFACE_PIXEL_FORMAT_GRPH_RGB111110_FLOAT/_FIX: SURFACE_PIXEL_FORMAT_GRPH_BGR101111_FLOAT/_FIX same as case SURFACE_PIXEL_FORMAT_GRPH_ARGB1555: Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/amdgpu: Add SQ_DEBUG_STS_GLOBAL* registers/bitsTom St Denis
Even though they are technically MMIO registers I put the bits with the sqind block for organizational purposes. Requested for UMR debugging. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu/jpeg: fix race condition issue for jpeg startJames Zhu
Fix race condition issue when multiple jpeg starts are called. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu/sriov: Need to clear kiq positionEmily Deng
As will clear vf fw during unload driver, to avoid idle fail. Need to clear KIQ portion also. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Ack-by: Monk.liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-15 07:54:49 +0000