summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2022-10-07drm/i915: Write watermarks for disabled pipes on gmch platformsVille Syrjälä
We've excluded gmch platforms from writing the final watermarks for any disabled pipe. IIRC the reason was perhaps some lingering issue with the watermark merging across the pipes. But I can't really see any reason for this anymore, so let's unify this behaviour. The main benefit being more consistency in register dumps when we don't have stale watermarks hanging around in the registers. Functionally there should be no difference as the hardware just ignore all of it when the pipe is disabled. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622155452.32587-9-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2022-10-07drm/i915: Fix pipe gamma enable/disable vs. CxSR on gmch platformsVille Syrjälä
Like most other plane control register bits, the pipe gamma enable bit is also blocked by CxSR. So make sure we kick the machine out of CxSR before trying to change that bit. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622155452.32587-8-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2022-10-07drm/i915: Fix g4x/vlv/chv CxSR vs. format/tiling/rotation changesVille Syrjälä
On g4x/vlv/chv the hardware seems incapable of changing the pixel format, rotation, or YUV->RGB CSC matrix while in CxSR. Additionally on VLV/CHV the sprites seem incapable of tiling changes while in CxSR. On g4x CxSR is not even possible with the sprite enabled. Curiously the primary plane seems perfectly happy when changing tiling during CxSR. Pimp up the code to account for these when determining whether CxSR needs to be disabled. Since it looks like most of the plane control register bits are affected let's just compare that. But in the name of efficiency we'll make an exception for the primary plane tiling changes (avoids some extra vblank waits). v2: Just use the pre-computed plane control register values Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622155452.32587-7-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2022-10-07drm/i915: Clean up some namespacingVille Syrjälä
Rename a few functions from intel_crtc_foo_init() to intel_foo_crtc_init() so that the namespaec clearly indicates what feature/file we're talking about. I left out intel_crtc_crc_init() because the whole crc stuff uses intel_crtc_ as its namespace currently. Suggested-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221004150929.23910-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-10-07Merge tag 'drm-next-2022-10-07-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fix from Dave Airlie: "This reverts the patch I found with rough bisection to instability around fences and the oops I got from netconsole. sched: - revert patch causing oopses" * tag 'drm-next-2022-10-07-1' of git://anongit.freedesktop.org/drm/drm: Revert "drm/sched: Use parent fence instead of finished"
2022-10-07drm/udl: Add constants for commandsThomas Zimmermann
Add constants for the various commands that the driver can send to the device and update the respective helper functions. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-17-tzimmermann@suse.de
2022-10-07drm/udl: Add register constants for framebuffer scanout addressesThomas Zimmermann
Add register constants for the framebuffer scanout addresses and update the related helper functions. No functional changes. v2: * extract address bytes with helper macros (Javier) * fix comments Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-16-tzimmermann@suse.de
2022-10-07drm/udl: Add register constants for video locksThomas Zimmermann
Add register constants for the video lock. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-15-tzimmermann@suse.de
2022-10-07drm/udl: Add register constants for color depthThomas Zimmermann
Add the register constants for setting the color depth. The driver only uses 16bpp. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-14-tzimmermann@suse.de
2022-10-07drm/udl: Add constants for display-mode registersThomas Zimmermann
Add constants for the registers the contain various display-mode parameters and update the mode-setting function. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-13-tzimmermann@suse.de
2022-10-07drm/udl: Move register constants to udl_proto.hThomas Zimmermann
Move the existing register constants to a new file in preparation of adding more of them. Renaming is intentional. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-12-tzimmermann@suse.de
2022-10-07drm/udl: Use damage iteratorThomas Zimmermann
Use a damage iterator to process damage areas individually. Merging damage areas can result in large updates of unchanged framebuffer regions. As USB is rather slow, it's better to process damage areas individually and hence minimize USB-transfered data. As part of the change, move drm_gem_fb_{begin,end}_cpu_access() into the plane's atomic_update helper. To avoid overhead and intermediate writers, we want to synchronize buffers and reserve access only once before copying damage areas of the framebuffer. v2: * clarify commit message (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-11-tzimmermann@suse.de
2022-10-07drm/udl: Support DRM hot-unpluggingThomas Zimmermann
Add drm_dev_enter() and drm_dev_exit() to the various modesetting functions that interact with the device. After hot-unplugging the device, these functions will return early. So far, the udl driver relied on USB interfaces to handle unplugging of the device. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-10-tzimmermann@suse.de
2022-10-07drm/udl: Simplify modesetting in CRTC's enable functionThomas Zimmermann
Inline a modesetting helper in the CRTC's enable function. Build the command set directly in the USB URB's buffer and drop an intermediate buffer. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-9-tzimmermann@suse.de
2022-10-07drm/udl: Convert to atomic-modesetting helpersThomas Zimmermann
Replace simple-KMS helpers with regular atomic-modesetting helpers. The simple-KMS helpers introduce a mid-layer abstraction without added functionality. Using regular atomic helpers makes the driver's implementation more discoverable and simplifies code sharing. The conversion effectively open-codes the simple-KMS functions and data structure within udl. No functional changes. v2: * don't use the atomic_disable plane helper Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-8-tzimmermann@suse.de
2022-10-07drm/udl: Remove udl_simple_display_pipe_mode_valid()Thomas Zimmermann
Remove the empty function udl_simple_display_pipe_mode_valid() and let simple-KMS helpers accept the modes. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-7-tzimmermann@suse.de
2022-10-07drm/udl: Move connector to modesetting codeThomas Zimmermann
Move the connector next to the rest of the modesetting code. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-6-tzimmermann@suse.de
2022-10-07drm/udl: Various improvements to the connectorThomas Zimmermann
Add style fixes, better error handling and reporting, and minor clean-up changes to the connector code before moving the code to the rest of the modesetting pipeline. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-5-tzimmermann@suse.de
2022-10-07drm/udl: Use USB timeout constant when reading EDIDThomas Zimmermann
Set the USB control-message timeout to the USB default of 5 seconds. Done for consistency with other uses of usb_control_msg() in udl and other drivers. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-4-tzimmermann@suse.de
2022-10-07drm/udl: Test pixel limit in mode-config's mode-valid functionThomas Zimmermann
The sku_pixel_limit is a per-device property, similar to the amount of available video memory. Move the respective mode-valid test from the connector to the mode-config structure. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-3-tzimmermann@suse.de
2022-10-07drm/udl: Rename struct udl_drm_connector to struct udl_connectorThomas Zimmermann
Remove the _drm_ infix from struct udl_drm_connector and introduce a macro for upcasting from struct drm_connector. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-2-tzimmermann@suse.de
2022-10-07Revert "drm/sched: Use parent fence instead of finished"Dave Airlie
This reverts commit e4dc45b1848bc6bcac31eb1b4ccdd7f6718b3c86. This is causing instability on Linus' desktop, and I'm seeing oops with VK CTS runs. netconsole got me the following oops: [ 1234.778760] BUG: kernel NULL pointer dereference, address: 0000000000000088 [ 1234.778782] #PF: supervisor read access in kernel mode [ 1234.778787] #PF: error_code(0x0000) - not-present page [ 1234.778791] PGD 0 P4D 0 [ 1234.778798] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 1234.778803] CPU: 7 PID: 805 Comm: systemd-journal Not tainted 6.0.0+ #2 [ 1234.778809] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020 [ 1234.778813] RIP: 0010:drm_sched_job_done.isra.0+0xc/0x140 [gpu_sched] [ 1234.778828] Code: aa 0f 1d ce e9 57 ff ff ff 48 89 d7 e8 9d 8f 3f ce e9 4a ff ff ff 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 53 48 89 fb <48> 8b af 88 00 00 00 f0 ff 8d f0 00 00 00 48 8b 85 80 01 00 00 f0 [ 1234.778834] RSP: 0000:ffffabe680380de0 EFLAGS: 00010087 [ 1234.778839] RAX: ffffffffc04e9230 RBX: 0000000000000000 RCX: 0000000000000018 [ 1234.778897] RDX: 00000ba278e8977a RSI: ffff953fb288b460 RDI: 0000000000000000 [ 1234.778901] RBP: ffff953fb288b598 R08: 00000000000000e0 R09: ffff953fbd98b808 [ 1234.778905] R10: 0000000000000000 R11: ffffabe680380ff8 R12: ffffabe680380e00 [ 1234.778908] R13: 0000000000000001 R14: 00000000ffffffff R15: ffff953fbd9ec458 [ 1234.778912] FS: 00007f35e7008580(0000) GS:ffff95428ebc0000(0000) knlGS:0000000000000000 [ 1234.778916] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1234.778919] CR2: 0000000000000088 CR3: 000000010147c000 CR4: 00000000003506e0 [ 1234.778924] Call Trace: [ 1234.778981] <IRQ> [ 1234.778989] dma_fence_signal_timestamp_locked+0x6a/0xe0 [ 1234.778999] dma_fence_signal+0x2c/0x50 [ 1234.779005] amdgpu_fence_process+0xc8/0x140 [amdgpu] [ 1234.779234] sdma_v3_0_process_trap_irq+0x70/0x80 [amdgpu] [ 1234.779395] amdgpu_irq_dispatch+0xa9/0x1d0 [amdgpu] [ 1234.779609] amdgpu_ih_process+0x80/0x100 [amdgpu] [ 1234.779783] amdgpu_irq_handler+0x1f/0x60 [amdgpu] [ 1234.779940] __handle_irq_event_percpu+0x46/0x190 [ 1234.779946] handle_irq_event+0x34/0x70 [ 1234.779949] handle_edge_irq+0x9f/0x240 [ 1234.779954] __common_interrupt+0x66/0x100 [ 1234.779960] common_interrupt+0xa0/0xc0 [ 1234.779965] </IRQ> [ 1234.779968] <TASK> [ 1234.779971] asm_common_interrupt+0x22/0x40 [ 1234.779976] RIP: 0010:finish_mkwrite_fault+0x22/0x110 [ 1234.779981] Code: 1f 84 00 00 00 00 00 90 0f 1f 44 00 00 41 55 41 54 55 48 89 fd 53 48 8b 07 f6 40 50 08 0f 84 eb 00 00 00 48 8b 45 30 48 8b 18 <48> 89 df e8 66 bd ff ff 48 85 c0 74 0d 48 89 c2 83 e2 01 48 83 ea [ 1234.779985] RSP: 0000:ffffabe680bcfd78 EFLAGS: 00000202 Revert it for now and figure it out later. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-10-06Revert "drm/amdgpu: use dirty framebuffer helper"Hamza Mahfooz
This reverts commit 66f99628eb24409cb8feb5061f78283c8b65f820. Unfortunately, that commit causes performance regressions on non-PSR setups. So, just revert it until FB_DAMAGE_CLIPS support can be added. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2189 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216554 Fixes: 66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper") Fixes: abbc7a3dafb91b ("drm/amdgpu: don't register a dirty callback for non-atomic") Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amdgpu: Correct amdgpu_amdkfd_total_mem_size calculationPhilip Yang
amdkfd_total_mem_size is the size of total GPUs vram plus system memory to estimate page tables memory usage and leave enough VRAM room for page tables allocation. Calculate amdkfd_total_mem_size in amdgpu_amdkfd_device_probe is incorrect because adev->gmc.real_vram_size is still 0 called from amdgpu_device_ip_early_init. Move the calculation to amdgpu_amdkfd_device_init to get the correct VRAM size. Do reverse calculation in amdgpu_amdkfd_device_fini_sw to support hot-unplugging GPUs. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amdgpu: Set vmbo destroy after pt bo is createdPhilip Yang
Under VRAM usage pression, map to GPU may fail to create pt bo and vmbo->shadow_list is not initialized, then ttm_bo_release calling amdgpu_bo_vm_destroy to access vmbo->shadow_list generates below dmesg and NULL pointer access backtrace: Set vmbo destroy callback to amdgpu_bo_vm_destroy only after creating pt bo successfully, otherwise use default callback amdgpu_bo_destroy. amdgpu: amdgpu_vm_bo_update failed amdgpu: update_gpuvm_pte() failed amdgpu: Failed to map bo to gpuvm amdgpu 0000:43:00.0: amdgpu: Failed to map peer:0000:43:00.0 mem_domain:2 BUG: kernel NULL pointer dereference, address: RIP: 0010:amdgpu_bo_vm_destroy+0x4d/0x80 [amdgpu] Call Trace: <TASK> ttm_bo_release+0x207/0x320 [amdttm] amdttm_bo_init_reserved+0x1d6/0x210 [amdttm] amdgpu_bo_create+0x1ba/0x520 [amdgpu] amdgpu_bo_create_vm+0x3a/0x80 [amdgpu] amdgpu_vm_pt_create+0xde/0x270 [amdgpu] amdgpu_vm_ptes_update+0x63b/0x710 [amdgpu] amdgpu_vm_update_range+0x2e7/0x6e0 [amdgpu] amdgpu_vm_bo_update+0x2bd/0x600 [amdgpu] update_gpuvm_pte+0x160/0x420 [amdgpu] amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x313/0x1130 [amdgpu] kfd_ioctl_map_memory_to_gpu+0x115/0x390 [amdgpu] kfd_ioctl+0x24a/0x5b0 [amdgpu] Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amdgpu: Fix VRAM BO swap issueArunpravin Paneer Selvam
DRM buddy manager allocates the contiguous memory requests in a single block or multiple blocks. So for the ttm move operation (incase of low vram memory) we should consider all the blocks to compute the total memory size which compared with the struct ttm_resource num_pages in order to verify that the blocks are contiguous for the eviction process. v2: Added a Fixes tag v3: Rewrite the code to save a bit of calculations and variables (Christian) Fixes: c9cad937c0c5 ("drm/amdgpu: add drm buddy support to amdgpu") Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Remove unused struct i2c_id_config_accessYuan Can
After commit 5a8132b9f606 ("drm/amd/display: remove dead dc vbios code"), no one use struct i2c_id_config_access, so remove it. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Removed unused variable 'sdp_stream_enable'Dong Chenchen
Kernel test robot throws below warning -> drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c: In function 'dcn31_hpo_dp_stream_enc_update_dp_info_packets': drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c:439:14: warning: variable 'sdp_stream_enable' set but not used [-Wunused-but-set-variable] 439 | bool sdp_stream_enable = false; Removed unused variable 'sdp_stream_enable'. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: clean up dcn32_fpu.c kernel-docRandy Dunlap
Rectify multiple kernel-doc warnings in dcn32_fpu.c. E.g.: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:247: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Finds dummy_latency_index when MCLK switching using firmware based drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:484: warning: Function parameter or member 'phantom_stream' not described in 'dcn32_set_phantom_stream_timing' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'dc' not described in 'dcn32_assign_subvp_pipe' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'context' not described in 'dcn32_assign_subvp_pipe' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'index' not described in 'dcn32_assign_subvp_pipe' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'dc' not described in 'dcn32_update_bw_bounding_box_fpu' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'bw_params' not described in 'dcn32_update_bw_bounding_box_fpu' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: expecting prototype for dcn32_update_bw_bounding_box(). Prototype was for dcn32_update_bw_bounding_box_fpu() instead Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: George Shen <george.shen@amd.com> Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Nevenko Stupar <Nevenko.Stupar@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Fix vblank refcount in vrr transitionYunxiang Li
manage_dm_interrupts disable/enable vblank using drm_crtc_vblank_off/on which causes drm_crtc_vblank_get in vrr_transition to fail, and later when drm_crtc_vblank_put is called the refcount on vblank will be messed up. Therefore move the call to after manage_dm_interrupts. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1247 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1380 Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-10-06drm/amd/display: Enable dpia support for dcn314Roman Li
[Why] DCN 3.1.4 supports DPIA. [How] - Set dpia_supported flag for dcn314 in dmub_hw_init() - Remove comment that becomes irrelevant after this change. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-10-06drm/amdgpu: Enable F32_WPTR_POLL_ENABLE in mqdRuili Ji
This patch is to fix the SDMA user queue doorbell missing issue on SDMA 6.0. F32_WPTR_POLL_ENABLE has to be set if doorbell mode is used. Otherwise ringing SDMA user queue doorbell can't wake up system from gfxoff. Signed-off-by: Ruili Ji <ruiliji2@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-10-06drm/amdgpu/sdma: add missing release_firmware() in amdgpu_sdma_init_microcode()Yang Yingliang
In some error path in amdgpu_sdma_init_microcode(), release_firmware() is not called, the memory allocated in request_firmware() will be leaked, calling amdgpu_sdma_destroy_inst_ctx() which calls release_firmware() to avoid memory leak. Fixes: 15aa13056d11da ("drm/amdgpu: add function to init SDMA microcode") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: clean up one inconsistent indentingYang Li
clean up one inconsistent indenting Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2321 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: clean up one inconsistent indentingYang Li
clean up one inconsistent indenting Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2238 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Minor code style changeRodrigo Siqueira
This commit adds some minor code style changes just to reduce the merge conflicts we have when we upstream some of the VBA code. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: update DSC for DCN32Rodrigo Siqueira
Update DSC checks in the DCN32 VBA. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Disconnect DSC for unused pipes during ODM transitionRodrigo Siqueira
[Why] During transition from ODM combine to ODM bypass, if DSC is enabled need to disconnect the DSC mux for pipes no longer in use. [How] During ODM update, detect pipes with DSC that are no longer being used for new state and call new DSC interface to disconnect. Add new DSC interface to disconnect from pipe Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: unblock mcm_lutsMartin Leung
why and how: needed to fix bad assumption for enable mcm_luts Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: 3.2.206Aric Cyr
This version brings along the following: - ILR improvements - PSR fixes - DCN315 fixes - DCN32 fixes - ODM fixes - DSC fixes - SubVP fixes Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Enable 2 to 1 ODM policy if supportedRodrigo Siqueira
If the current configuration supports 2 to 1 ODM policy, let's also enable the windowed MPO feature. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-10-06drm/amd/display: Add PState change high hook for DCN32Rodrigo Siqueira
For some reason, we missed the PState check for DCN32 which may cause issues for clock transition. This commit add that required hook. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amdgpu: Enable VCN PG on GC11_0_1Sonny Jiang
Enable VCN PG on GC11_0_1 Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-10-06drm/amd/display: Add missing mask sh for SYM32_TP_SQ_PULSE registerWenjing Liu
There is a missing register mask in dcn32 causing the hardware programming is not executed when programming SQ_num test pattern for DP2. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Add missing SDP registers to DCN32 reglistGeorge Shen
[Why] Certain features require the additional DP SDP configuration registers DP_SEC_CNTL1 and DP_SEC_CNTL5 in order to function correctly. The DCN32 DIO stream encoder reglist is currently missing these two registers. [How] Add the missing registers to the DCN32 DIO stream encoder reglist. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: George Shen <George.Shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Fix disable DSC logic in the DIO codeEric Bernstein
[Why] In DIO stream encoder, definition of DP_DSC_MODE is changed (only enable/disable) In OPTC, OTG_SET_V_TOTAL_MIN_MASK_EN is removed (same as DCN3.1) [How] In DIO stream encoder, update enc32_dp_set_dsc_config(). In OPTC, use DCN3.1 version for function interfaces .set_vrr_m_const and .set_drr Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Fix merging dynamic ODM+MPO configs on DCN32Dillon Varone
[WHY&HOW?] When merging ODM pipes that are using MPO, we must copy the stream_res from the new top pipe to the bottom pipe so that the overlayed plane is not pointing to the wrong stream assets. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Adding missing HDMI ACP SEND registerRodrigo Siqueira
Add HDMI ACP bit field definition for DCN32. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Remove OPTC lock checkRodrigo Siqueira
At some point, we decided to blank HUBP during pixel data blank, and to handle that, we added some OPTC lock checks. Later, we realized that this change caused multiple regression, and we removed it. Nevertheless, we still have some leftovers that might affect some ASIC behavior, and this commit drops those changes to keep the code consistent. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Fix SubVP control flow in the MPO contextRodrigo Siqueira
SubVP has some issues related to how we allocate and enable it. This commit fixes this behavior by adding the proper check and configuration to the SubVP code path. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 02:49:36 +0000