| Age | Commit message (Collapse) | Author |
|---|
|
Split g4x_compute_pipe_wm() into two halves. The first half computes
the new raw watermarks, and the second half munges those up into real
watermarks for the particular pipe.
We can reuse the second half for watermark sanitation as well.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622155452.32587-2-ville.syrjala@linux.intel.com
|
|
In the unlikely case of not finding a fixed mode don't register
the eDP connector. I think there are some places where we'd oops
if we didn't have a fixed mode for eDP so presumable this doesn't
typically happen. But better safe than sorry.
Also pimp the debugs with the encoder id+name. I think dumping
the encoder rather than the connector provides more information
here (eg. to match against the port information in the VBT).
We can also drop the extra check from intel_edp_add_properties().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
All the connectors are zero initialized so no need to clear
the *_allowed flags we don't support. Only leave the ones we want
to set. And while at it switch to booleans instead of ints.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Consolidate the scaling_mode property setup into a single
place.
The one slight complicateion here is that GMCH platforms can't
do the CENTER mode except on the LVDS port. But we can deal with
that by just checking the connector type.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
We have an eDP specific intel_edp_add_properties() so move
the eDP scaling_mode property setup there from
intel_dp_add_properties().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move the LVDS connector property setup to a dedicated
function to depollute intel_lvds_init() a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move the DP MST connector property setup into its own function
so it's not spread all over intel_dp_add_mst_connector().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pull all the TV connector property setup into its own neat function.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pull the eDP backlight setup into its own function. No
reason to pollute intel_edp_init_connector() with all
the mundane details.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-7-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Most of our encoder type cast stuff already operates on
intel_encoder rather than drm_encoder. Switch to_lvds_encoder()
over as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-6-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Most places that deal with output types already use BIT()
but a few places still use manual shifts. Convert the
stragglers over to BIT().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-5-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Just return the thing directly from the switch statement.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-4-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Drop the pointless middle man variable and just return the
correct thing directly. And while at it change the return
type to u32 since this is a register value we're returning.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-3-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
No need for the 'procmon' variable here. Just return the correct
thing from the switch statement directly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-2-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
'virtio', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
When we submit a new pair of contexts to ELSP for execution, we start a
timer by which point we expect the HW to have switched execution to the
pending contexts. If the promotion to the new pair of contexts has not
occurred, we declare the executing context to have hung and force the
preemption to take place by resetting the engine and resubmitting the
new contexts.
This can lead to an unfair situation where almost all of the preemption
timeout is consumed by the first context which just switches into the
second context immediately prior to the timer firing and triggering the
preemption reset (assuming that the timer interrupts before we process
the CS events for the context switch). The second context hasn't yet had
a chance to yield to the incoming ELSP (and send the ACk for the
promotion) and so ends up being blamed for the reset.
If we see that a context switch has occurred since setting the
preemption timeout, but have not yet received the ACK for the ELSP
promotion, rearm the preemption timer and check again. This is
especially significant if the first context was not schedulable and so
we used the shortest timer possible, greatly increasing the chance of
accidentally blaming the second innocent context.
Fixes: 3a7a92aba8fb ("drm/i915/execlists: Force preemption")
Fixes: d12acee84ffb ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220921135258.1714873-1-andrzej.hajda@intel.com
|
|
Let's make sure nobody is calling those functions without holding the
appropriate locks.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715111533.467012-2-christian.koenig@amd.com
|
|
The inline function has no place in i915_drv.h. Move it away, un-inline,
and untangle some header dependencies while at it.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914163514.1837467-1-jani.nikula@intel.com
|
|
The symbol is not used outside of the file, so mark it static.
Fixes the following warning:
drivers/gpu/drm/ast/ast_drv.c:42:5: warning: symbol 'ast_modeset'
was not declared. Should it be static?
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926023253.739699-1-ruanjinjie@huawei.com
|
|
The field mode_valid in exynos_drm_crtc_ops is expected to be of type enum
drm_mode_status (*mode_valid)(struct exynos_drm_crtc *crtc,
const struct drm_display_mode *mode);
Likewise for mode_valid in drm_connector_helper_funcs.
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of mixer_mode_valid and hdmi_mode_valid should be changed
from int to enum drm_mode_status.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://protect2.fireeye.com/v1/url?k=3e644738-5fef521d-3e65cc77-
74fe485cbff6-36ad29bf912d3c9f&q=1&e=5cc06174-77dd-4abd-ab50-
155da5711aa3&u=https%3A%2F%2Fgithub.com%2FClangBuiltLinux%2Flinux%2Fissues%2F
1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Once EDID is parsed, the monitor HDMI support information is available
through drm_display_info.is_hdmi.
This driver calls drm_detect_hdmi_monitor() to receive the same
information, which is less efficient.
Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi
instead.
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
upgrade the callchain to drm_dbg() and drm_dev_dbg(); add a struct
_ddebug ptr parameter to them, and supply that additional param by
replacing the '_no_desc' flavor of dyndbg Factory macro currently used
with the flavor that supplies the descriptor.
NOTES:
The descriptor gives these fns access to the decorator flags, but they
do none of the dynamic-prefixing done by dynamic_emit_prefix(), which
is currently static.
DRM already has conventions for logging/messaging; just tossing
optional decorations on top probably wouldn't help. Instead, existing
flags (or new ones, perhaps 'sd' ala lspci) can be used to make
current message conventions optional. This suggests a new
drmdbg_prefix_emit() to handle prefixing locally.
For CONFIG_DRM_USE_DYNAMIC_DEBUG=N, just pass null descriptor.
desc->class_id is redundant with category parameter, but its
availability is dependent on desc.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drm_print.c calls pr_debug() just once, from __drm_printfn_debug(),
which is a generic/service fn. The callsite is compile-time enabled
by DEBUG in both DYNAMIC_DEBUG=y/n builds.
For dyndbg builds, reverting this callsite back to bare printk is
correcting a few anti-features:
1- callsite is generic, serves multiple drm users.
it is soft-wired on currently by #define DEBUG
could accidentally: #> echo -p > /proc/dynamic_debug/control
2- optional "decorations" by dyndbg are unhelpful/misleading here,
they describe only the generic site, not end users
IOW, 1,2 are unhelpful at best, and possibly confusing.
reverting yields a nominal data and text shrink:
text data bss dec hex filename
462583 36604 54592 553779 87333 /kernel/drivers/gpu/drm/drm.ko
462515 36532 54592 553639 872a7 -dirty/kernel/drivers/gpu/drm/drm.ko
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-9-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When CONFIG_DRM_USE_DYNAMIC_DEBUG=y, the drm.debug API (a macro stack,
calling _+drm_*dbg() eventually) invokes a dyndbg Factory macro to
create a descriptor for each callsite, thus making them individually
>control-able.
In this case, the calls to _drm_*dbg are unreachable unless the
callsite is enabled. So those calls can short-circuit their early
do-nothing returns. Provide and use __drm_debug_enabled(), to do this
when config'd, or the _raw flags-check otherwize.
And since dyndbg is in use, lets also instrument the remaining users
of drm_debug_enabled, by wrapping the _raw in a macro with a:
pr_debug("todo: is this frequent enough to optimize ?\n");
For CONFIG_DRM_USE_DYNAMIC_DEBUG=n, do no site instrumenting at all,
since JUMP_LABEL might be off, and we don't want to make work.
With drm, amdgpu, i915, nouveau loaded, heres remaining uses of
drm_debug_enabled(), which costs ~1.5kb data to control the
pr_debug("todo:..")s.
Some of those uses might be ok to use __drm_debug_enabled() by
inspection, others might warrant conversion to use dyndbg Factory
macros, and that would want callrate data to estimate the savings
possible. TBH, any remaining savings are probably small; drm.debug
covers the vast bulk of the uses. Maybe "vblank" is the exception.
:#> grep todo /proc/dynamic_debug/control | wc
21 168 2357
:#> grep todo /proc/dynamic_debug/control
drivers/gpu/drm/drm_edid_load.c:178 [drm]edid_load =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:410 [drm]drm_crtc_accurate_vblank_count =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:787 [drm]drm_crtc_vblank_helper_get_vblank_timestamp_internal =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:1491 [drm]drm_vblank_restore =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:1433 [drm]drm_vblank_enable =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_plane.c:2168 [drm]drm_mode_setplane =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:1359 [drm_display_helper]drm_dp_mst_wait_tx_reply =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:2864 [drm_display_helper]process_single_tx_qlock =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:2909 [drm_display_helper]drm_dp_queue_down_tx =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:1686 [drm_display_helper]drm_dp_mst_update_slots =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_dp.c:1111 [i915]intel_dp_print_rates =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_backlight.c:5434 [i915]cnp_enable_backlight =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_backlight.c:5459 [i915]intel_backlight_device_register =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_opregion.c:43 [i915]intel_opregion_notify_encoder =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_opregion.c:53 [i915]asle_set_backlight =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_bios.c:1088 [i915]intel_bios_is_dsi_present =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_display_debugfs.c:6153 [i915]i915_drrs_ctl_set =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/intel_pcode.c:26 [i915]snb_pcode_read =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/i915_getparam.c:785 [i915]i915_getparam_ioctl =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:282 [amdgpu]vcn_v2_5_process_interrupt =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:433 [amdgpu]vcn_v2_0_process_interrupt =_ "todo: maybe avoid via dyndbg\n"
:#>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For CONFIG_DRM_USE_DYNAMIC_DEBUG=y, wrap __drm_dbg() & __drm_dev_dbg()
in one of dyndbg's Factory macros: _dynamic_func_call_no_desc().
This adds the callsite descriptor into the code, and an entry for each
into /proc/dynamic_debug/control.
#> echo class DRM_UT_ATOMIC +p > /proc/dynamic_debug/control
CONFIG_DRM_USE_DYNAMIC_DEBUG=y/n is configurable because of the .data
footprint cost of per-callsite control; 56 bytes/site * ~2k for i915,
~4k callsites for amdgpu. This is large enough that a kernel builder
might not want it.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-5-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
change drm_dev_dbg & drm_dbg to macros, which forward to the renamed
functions (with __ prefix added).
Those functions sit below the categorized layer of macros implementing
the DRM debug.category API, and implement most of it. These are good
places to insert dynamic-debug jump-label mechanics, which will allow
DRM to avoid the runtime cost of drm_debug_enabled().
no functional changes.
memory cost baseline: (unchanged)
bash-5.1# drms_load
[ 9.220389] dyndbg: 1 debug prints in module drm
[ 9.224426] ACPI: bus type drm_connector registered
[ 9.302192] dyndbg: 2 debug prints in module ttm
[ 9.305033] dyndbg: 8 debug prints in module video
[ 9.627563] dyndbg: 127 debug prints in module i915
[ 9.721505] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 10.091345] dyndbg: 2196 debug prints in module amdgpu
[ 10.106589] [drm] amdgpu kernel modesetting enabled.
[ 10.107270] amdgpu: CRAT table not found
[ 10.107926] amdgpu: Virtual CRAT table created for CPU
[ 10.108398] amdgpu: Topology: Add CPU node
[ 10.168507] dyndbg: 3 debug prints in module wmi
[ 10.329587] dyndbg: 3 debug prints in module nouveau
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-4-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use DECLARE_DYNDBG_CLASSMAP across DRM:
- in .c files, since macro defines/initializes a record
- in drivers, $mod_{drv,drm,param}.c
ie where param setup is done, since a classmap is param related
- in drm/drm_print.c
since existing __drm_debug param is defined there,
and we ifdef it, and provide an elaborated alternative.
- in drm_*_helper modules:
dp/drm_dp - 1st item in makefile target
drivers/gpu/drm/drm_crtc_helper.c - random pick iirc.
Since these modules all use identical CLASSMAP declarations (ie: names
and .class_id's) they will all respond together to "class DRM_UT_*"
query-commands:
:#> echo class DRM_UT_KMS +p > /proc/dynamic_debug/control
NOTES:
This changes __drm_debug from int to ulong, so BIT() is usable on it.
DRM's enum drm_debug_category values need to sync with the index of
their respective class-names here. Then .class_id == category, and
dyndbg's class FOO mechanisms will enable drm_dbg(DRM_UT_KMS, ...).
Though DRM needs consistent categories across all modules, thats not
generally needed; modules X and Y could define FOO differently (ie a
different NAME => class_id mapping), changes are made according to
each module's private class-map.
No callsites are actually selected by this patch, since none are
class'd yet.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use *_hpd_invert() helpers whenever possible to isolate logic specific
to hotplug inversion from common HPD setup logic to improve readability
and maintainability of the source code.
While we only define dg1_hpd_invert() here, future platforms are likely
to have different hotplug inversion needs, thus it makes sense grouping
different implementations under a common suffix.
v2: Fix coding style and prefer to use small *_hdp_invert() helpers
instead of a generic one.
CC: Jani Nikula <jani.nikula@linux.intel.com>
CC: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922164949.163985-1-gustavo.sousa@intel.com
|
|
The function parameter 'exclude' in funciton
i915_sw_fence_await_reservation() is not used.
Remove it.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922213916.12112-1-niranjana.vishwanathapura@intel.com
|
|
Expand the current stepping convention to accommodate the GMD
stepping info. Typically GMD step maps to letter stepping
by "A + step %4" and number to "A + step /4" i.e, GMD step
0 maps to STEP_A0, 1 to _A1, 2 to _A2, 3 to _A3, 4 to STEP_B0...
Future platforms might break this formulae and may require a table
mapping to decode GMD step compatible with the convention.
v2:
- Pass the updated ip version structure
v3:
- Skip using GMD to step table(MattR)
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916014648.1310346-3-radhakrishna.sripada@intel.com
|
|
Going forward, the hardware teams no longer consider new platforms to
have a "generation" in the way we've defined it for past platforms.
Instead, each IP block (graphics, media, display) will have their own
architecture major.minor versions and stepping ID's which should be read
directly from a register in the MMIO space.
Bspec: 63361, 64111
v2:
- Move the IP version readout to intel_device_info.c
- Convert the macro into a function
v3:
- Move subplatform init to runtime early init
- Cache runtime ver, release info to compare with hardware values.
- Use IP_VER for snaity check(MattR)
v4:
- Minor doccumentation changes.
- Normalize HAS_GMD_ID macro value.(JaniN)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916014648.1310346-2-radhakrishna.sripada@intel.com
|
|
Wa_22015475538 applies to all DG2 (and ATSM) skus. The workaround
implementation is identical to Wa_16011620976. LSC_CHICKEN_BIT_0_UDW is
a general render register instead of rcs so adding this move to the
proper wa init function.
bspec:54077
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220920204359.103370-1-matthew.s.atwood@intel.com
|
|
Add support for the AUO - B116XAK01.6 (HW: 1A) panel.
Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923055133.302740-1-sean.hong@quanta.corp-partner.google.com
|
|
Add support for the BOE - NT116WHM-N21 (HW: V8.2) panel.
Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923054614.302440-1-sean.hong@quanta.corp-partner.google.com
|
|
Add support for the BOE - NT116WHM-N21 (HW: V8.1) panel.
Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923085028.306790-1-sean.hong@quanta.corp-partner.google.com
|
|
Add support for the INX - N116BCN-EA1 (HW: C4) panel.
Signed-off-by: Sean Hong <sean.hong@quanta.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220923053729.301626-1-sean.hong@quanta.corp-partner.google.com
|
|
suspend/resume time"
This reverts commit 211f276ed3d96e964d2d1106a198c7f4a4b3f4c0.
For quite some time, core DRM helpers already ensure that any relevant
connectors/CRTCs/etc. are disabled, as well as their associated
components (e.g., bridges) when suspending the system. Thus,
analogix_dp_bridge_{enable,disable}() already get called, which in turn
call drm_panel_{prepare,unprepare}(). This makes these drm_panel_*()
calls redundant.
Besides redundancy, there are a few problems with this handling:
(1) drm_panel_{prepare,unprepare}() are *not* reference-counted APIs and
are not in general designed to be handled by multiple callers --
although some panel drivers have a coarse 'prepared' flag that mitigates
some damage, at least. So at a minimum this is redundant and confusing,
but in some cases, this could be actively harmful.
(2) The error-handling is a bit non-standard. We ignored errors in
suspend(), but handled errors in resume(). And recently, people noticed
that the clk handling is unbalanced in error paths, and getting *that*
right is not actually trivial, given the current way errors are mostly
ignored.
(3) In the particular way analogix_dp_{suspend,resume}() get used (e.g.,
in rockchip_dp_*(), as a late/early callback), we don't necessarily have
a proper PM relationship between the DP/bridge device and the panel
device. So while the DP bridge gets resumed, the panel's parent device
(e.g., platform_device) may still be suspended, and so any prepare()
calls may fail.
So remove the superfluous, possibly-harmful suspend()/resume() handling
of panel state.
Fixes: 211f276ed3d9 ("drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time")
Link: https://lore.kernel.org/all/Yv2CPBD3Picg%2FgVe@google.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220822180729.1.I8ac5abe3a4c1c6fd5c061686c6e883c22f69022c@changeid
|
|
The ->ring_idx_mask variable is a u64 so static checkers, Smatch in
this case, complain if the BIT() is not also a u64.
drivers/gpu/drm/virtio/virtgpu_ioctl.c:50 virtio_gpu_fence_event_create()
warn: should '(1 << ring_idx)' be a 64 bit type?
Fixes: cd7f5ca33585 ("drm/virtio: implement context init: add virtio_gpu_fence_event")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/YygN7jY0GdUSQSy0@kili
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Since qxl_io_reset(qdev) will be called immediately
after qxl_ring_create() been called,
and parameter like notify_on_prod will be set to default value.
So the call to qxl_ring_init_hdr() before becomes meaningless.
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Suggested-by: Ming Xie<xieming@kylinos.cn>
Link: http://patchwork.freedesktop.org/patch/msgid/20220920065023.1633303-1-zhouzongmin@kylinos.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
There are ongoing efforts to remove usages of flush_scheduled_work() from
drivers in order to avoid several cases of potentential problems when
flushing is done from certain contexts.
Remove the call from the live_execlists selftest. Its purpose was to be
thorough and sync with the execlists capture state handling, but that is
not strictly required for the test to function and can be removed.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630125716.50835-1-tvrtko.ursulin@linux.intel.com
|
|
Existing code is causing a race condition where dirt_needed value is
already set by the host and gets overwritten with default value. Remove
this default setting of dirt_needed, to avoid overwriting the value
received in the channel callback set by vmbus_open. Removing this
setting also means the default value for dirt_needed is changed to false
as it's allocated by kzalloc which is similar to legacy hyperv_fb driver.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1662996766-19304-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Remove the old tales about 90/270 degree rotation
effectively preventing FBC. That hasn't been true since
we stopped demanding the fence is present in
commit 691f7ba58d52 ("drm/i915/display/fbc: Make fences
a nice-to-have for GEN9+")
Also fix up the multiline comment formatting while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916165206.1499-2-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coeho <luciano.coelho@intel.com>
|
|
The plane ratio stuff got implemented in
commit bb6ae9e653dc ("drm/i915: Allow planes to
declare their minimum acceptable cdclk") so these
FIXMEs have no business being here.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916165206.1499-1-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
|
|
drm bridges added by meson_encoder_hdmi_init and meson_encoder_cvbs_init
were not manually removed at module unload time, which caused dangling
references to freed memory to remain linked in the global bridge_list.
When loading the driver modules back in, the same functions would again
call drm_bridge_add, and when traversing the global bridge_list, would
end up peeking into freed memory.
Once again KASAN revealed the problem:
[ +0.000095] =============================================================
[ +0.000008] BUG: KASAN: use-after-free in __list_add_valid+0x9c/0x120
[ +0.000018] Read of size 8 at addr ffff00003da291f0 by task modprobe/2483
[ +0.000018] CPU: 3 PID: 2483 Comm: modprobe Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000011] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000006] dump_backtrace+0x1ec/0x280
[ +0.000012] show_stack+0x24/0x80
[ +0.000008] dump_stack_lvl+0x98/0xd4
[ +0.000011] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000008] kasan_report+0xb8/0xfc
[ +0.000008] __asan_report_load8_noabort+0x3c/0x50
[ +0.000009] __list_add_valid+0x9c/0x120
[ +0.000009] drm_bridge_add+0x6c/0x104 [drm]
[ +0.000165] dw_hdmi_probe+0x1900/0x2360 [dw_hdmi]
[ +0.000022] meson_dw_hdmi_bind+0x520/0x814 [meson_dw_hdmi]
[ +0.000014] component_bind+0x174/0x520
[ +0.000012] component_bind_all+0x1a8/0x38c
[ +0.000010] meson_drv_bind_master+0x5e8/0xb74 [meson_drm]
[ +0.000032] meson_drv_bind+0x20/0x2c [meson_drm]
[ +0.000027] try_to_bring_up_aggregate_device+0x19c/0x390
[ +0.000010] component_master_add_with_match+0x1c8/0x284
[ +0.000009] meson_drv_probe+0x274/0x280 [meson_drm]
[ +0.000026] platform_probe+0xd0/0x220
[ +0.000009] really_probe+0x3ac/0xa80
[ +0.000009] __driver_probe_device+0x1f8/0x400
[ +0.000009] driver_probe_device+0x68/0x1b0
[ +0.000009] __driver_attach+0x20c/0x480
[ +0.000008] bus_for_each_dev+0x114/0x1b0
[ +0.000009] driver_attach+0x48/0x64
[ +0.000008] bus_add_driver+0x390/0x564
[ +0.000009] driver_register+0x1a8/0x3e4
[ +0.000009] __platform_driver_register+0x6c/0x94
[ +0.000008] meson_drm_platform_driver_init+0x3c/0x1000 [meson_drm]
[ +0.000027] do_one_initcall+0xc4/0x2b0
[ +0.000011] do_init_module+0x154/0x570
[ +0.000011] load_module+0x1a78/0x1ea4
[ +0.000008] __do_sys_init_module+0x184/0x1cc
[ +0.000009] __arm64_sys_init_module+0x78/0xb0
[ +0.000009] invoke_syscall+0x74/0x260
[ +0.000009] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000012] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000016] Allocated by task 879:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000011] __kasan_kmalloc+0x90/0xd0
[ +0.000007] __kmalloc+0x278/0x4a0
[ +0.000011] mpi_resize+0x13c/0x1d0
[ +0.000011] mpi_powm+0xd24/0x1570
[ +0.000009] rsa_enc+0x1a4/0x30c
[ +0.000009] pkcs1pad_verify+0x3f0/0x580
[ +0.000009] public_key_verify_signature+0x7a8/0xba4
[ +0.000010] public_key_verify_signature_2+0x40/0x60
[ +0.000008] verify_signature+0xb4/0x114
[ +0.000008] pkcs7_validate_trust_one.constprop.0+0x3b8/0x574
[ +0.000009] pkcs7_validate_trust+0xb8/0x15c
[ +0.000008] verify_pkcs7_message_sig+0xec/0x1b0
[ +0.000012] verify_pkcs7_signature+0x78/0xac
[ +0.000007] mod_verify_sig+0x110/0x190
[ +0.000009] module_sig_check+0x114/0x1e0
[ +0.000009] load_module+0xa0/0x1ea4
[ +0.000008] __do_sys_init_module+0x184/0x1cc
[ +0.000008] __arm64_sys_init_module+0x78/0xb0
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000009] el0_svc_common.constprop.0+0x1a8/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000013] Freed by task 2422:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000009] kasan_set_track+0x2c/0x40
[ +0.000007] kasan_set_free_info+0x28/0x50
[ +0.000009] ____kasan_slab_free+0x128/0x1d4
[ +0.000008] __kasan_slab_free+0x18/0x24
[ +0.000007] slab_free_freelist_hook+0x108/0x230
[ +0.000010] kfree+0x110/0x35c
[ +0.000008] release_nodes+0xf0/0x16c
[ +0.000009] devres_release_group+0x180/0x270
[ +0.000008] take_down_aggregate_device+0xcc/0x160
[ +0.000010] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000013] platform_remove+0x64/0xb0
[ +0.000008] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000008] driver_unregister+0x70/0xb0
[ +0.000009] platform_driver_unregister+0x20/0x2c
[ +0.000007] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000012] __do_sys_delete_module+0x288/0x400
[ +0.000009] __arm64_sys_delete_module+0x5c/0x80
[ +0.000009] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000008] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000013] The buggy address belongs to the object at ffff00003da29000
which belongs to the cache kmalloc-1k of size 1024
[ +0.000008] The buggy address is located 496 bytes inside of
1024-byte region [ffff00003da29000, ffff00003da29400)
[ +0.000015] The buggy address belongs to the physical page:
[ +0.000009] page:fffffc0000f68a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3da28
[ +0.000012] head:fffffc0000f68a00 order:3 compound_mapcount:0 compound_pincount:0
[ +0.000009] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[ +0.000019] raw: 0ffff00000010200 fffffc0000eb5c08 fffffc0000d96608 ffff000000002a80
[ +0.000008] raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000
[ +0.000008] page dumped because: kasan: bad access detected
[ +0.000011] Memory state around the buggy address:
[ +0.000009] ffff00003da29080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ffff00003da29100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] >ffff00003da29180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ^
[ +0.000008] ffff00003da29200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000006] ffff00003da29280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ==================================================================
Fix by keeping track of which encoders were initialised in the meson_drm
structure and manually removing their bridges at aggregate driver's unbind
time.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220920222842.1053234-1-adrian.larumbe@collabora.com
|
|
Because component_master_del wasn't being called when unloading the
meson_drm module, the aggregate device would linger forever in the global
aggregate_devices list. That means when unloading and reloading the
meson_dw_hdmi module, component_add would call into
try_to_bring_up_aggregate_device and find the unbound meson_drm aggregate
device.
This would in turn dereference some of the aggregate_device's struct
entries which point to memory automatically freed by the devres API when
unbinding the aggregate device from meson_drv_unbind, and trigger an
use-after-free bug:
[ +0.000014] =============================================================
[ +0.000007] BUG: KASAN: use-after-free in find_components+0x468/0x500
[ +0.000017] Read of size 8 at addr ffff000006731688 by task modprobe/2536
[ +0.000018] CPU: 4 PID: 2536 Comm: modprobe Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000010] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000005] dump_backtrace+0x1ec/0x280
[ +0.000011] show_stack+0x24/0x80
[ +0.000007] dump_stack_lvl+0x98/0xd4
[ +0.000010] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000007] kasan_report+0xb8/0xfc
[ +0.000007] __asan_report_load8_noabort+0x3c/0x50
[ +0.000009] find_components+0x468/0x500
[ +0.000008] try_to_bring_up_aggregate_device+0x64/0x390
[ +0.000009] __component_add+0x1dc/0x49c
[ +0.000009] component_add+0x20/0x30
[ +0.000008] meson_dw_hdmi_probe+0x28/0x34 [meson_dw_hdmi]
[ +0.000013] platform_probe+0xd0/0x220
[ +0.000008] really_probe+0x3ac/0xa80
[ +0.000008] __driver_probe_device+0x1f8/0x400
[ +0.000008] driver_probe_device+0x68/0x1b0
[ +0.000008] __driver_attach+0x20c/0x480
[ +0.000009] bus_for_each_dev+0x114/0x1b0
[ +0.000007] driver_attach+0x48/0x64
[ +0.000009] bus_add_driver+0x390/0x564
[ +0.000007] driver_register+0x1a8/0x3e4
[ +0.000009] __platform_driver_register+0x6c/0x94
[ +0.000007] meson_dw_hdmi_platform_driver_init+0x30/0x1000 [meson_dw_hdmi]
[ +0.000014] do_one_initcall+0xc4/0x2b0
[ +0.000008] do_init_module+0x154/0x570
[ +0.000010] load_module+0x1a78/0x1ea4
[ +0.000008] __do_sys_init_module+0x184/0x1cc
[ +0.000008] __arm64_sys_init_module+0x78/0xb0
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000008] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000014] Allocated by task 902:
[ +0.000007] kasan_save_stack+0x2c/0x5c
[ +0.000009] __kasan_kmalloc+0x90/0xd0
[ +0.000007] __kmalloc_node+0x240/0x580
[ +0.000010] memcg_alloc_slab_cgroups+0xa4/0x1ac
[ +0.000010] memcg_slab_post_alloc_hook+0xbc/0x4c0
[ +0.000008] kmem_cache_alloc_node+0x1d0/0x490
[ +0.000009] __alloc_skb+0x1d4/0x310
[ +0.000010] alloc_skb_with_frags+0x8c/0x620
[ +0.000008] sock_alloc_send_pskb+0x5ac/0x6d0
[ +0.000010] unix_dgram_sendmsg+0x2e0/0x12f0
[ +0.000010] sock_sendmsg+0xcc/0x110
[ +0.000007] sock_write_iter+0x1d0/0x304
[ +0.000008] new_sync_write+0x364/0x460
[ +0.000007] vfs_write+0x420/0x5ac
[ +0.000008] ksys_write+0x19c/0x1f0
[ +0.000008] __arm64_sys_write+0x78/0xb0
[ +0.000007] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0x1a8/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000008] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000013] Freed by task 2509:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000007] kasan_set_track+0x2c/0x40
[ +0.000008] kasan_set_free_info+0x28/0x50
[ +0.000008] ____kasan_slab_free+0x128/0x1d4
[ +0.000008] __kasan_slab_free+0x18/0x24
[ +0.000007] slab_free_freelist_hook+0x108/0x230
[ +0.000010] kfree+0x110/0x35c
[ +0.000008] release_nodes+0xf0/0x16c
[ +0.000008] devres_release_all+0xfc/0x180
[ +0.000008] device_unbind_cleanup+0x24/0x164
[ +0.000008] device_release_driver_internal+0x3e8/0x5b0
[ +0.000010] driver_detach+0xac/0x1b0
[ +0.000008] bus_remove_driver+0x158/0x29c
[ +0.000008] driver_unregister+0x70/0xb0
[ +0.000009] platform_driver_unregister+0x20/0x2c
[ +0.000007] 0xffff800003722d98
[ +0.000012] __do_sys_delete_module+0x288/0x400
[ +0.000009] __arm64_sys_delete_module+0x5c/0x80
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000008] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000013] Last potentially related work creation:
[ +0.000007] kasan_save_stack+0x2c/0x5c
[ +0.000007] __kasan_record_aux_stack+0xb8/0xf0
[ +0.000009] kasan_record_aux_stack_noalloc+0x14/0x20
[ +0.000008] insert_work+0x54/0x290
[ +0.000009] __queue_work+0x48c/0xd24
[ +0.000008] queue_work_on+0x90/0x11c
[ +0.000008] call_usermodehelper_exec+0x188/0x404
[ +0.000010] kobject_uevent_env+0x5a8/0x794
[ +0.000010] kobject_uevent+0x14/0x20
[ +0.000008] driver_register+0x230/0x3e4
[ +0.000009] __platform_driver_register+0x6c/0x94
[ +0.000007] gxbb_driver_init+0x28/0x34
[ +0.000010] do_one_initcall+0xc4/0x2b0
[ +0.000008] do_initcalls+0x20c/0x24c
[ +0.000010] kernel_init_freeable+0x22c/0x278
[ +0.000009] kernel_init+0x3c/0x170
[ +0.000008] ret_from_fork+0x10/0x20
[ +0.000013] The buggy address belongs to the object at ffff000006731600
which belongs to the cache kmalloc-256 of size 256
[ +0.000009] The buggy address is located 136 bytes inside of
256-byte region [ffff000006731600, ffff000006731700)
[ +0.000015] The buggy address belongs to the physical page:
[ +0.000008] page:fffffc000019cc00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff000006730a00 pfn:0x6730
[ +0.000011] head:fffffc000019cc00 order:2 compound_mapcount:0 compound_pincount:0
[ +0.000008] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[ +0.000016] raw: 0ffff00000010200 fffffc00000c3d08 fffffc0000ef2b08 ffff000000002680
[ +0.000009] raw: ffff000006730a00 0000000000150014 00000001ffffffff 0000000000000000
[ +0.000006] page dumped because: kasan: bad access detected
[ +0.000011] Memory state around the buggy address:
[ +0.000007] ffff000006731580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ +0.000007] ffff000006731600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] >ffff000006731680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ^
[ +0.000006] ffff000006731700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ +0.000007] ffff000006731780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ +0.000006] ==================================================================
Fix by adding 'remove' driver callback for meson-drm, and explicitly deleting the
aggregate device.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919010940.419893-3-adrian.larumbe@collabora.com
|
|
Unloading the driver triggers the following KASAN warning:
[ +0.006275] =============================================================
[ +0.000029] BUG: KASAN: use-after-free in __list_del_entry_valid+0xe0/0x1a0
[ +0.000026] Read of size 8 at addr ffff000020c395e0 by task rmmod/2695
[ +0.000019] CPU: 5 PID: 2695 Comm: rmmod Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000013] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000007] dump_backtrace+0x1ec/0x280
[ +0.000013] show_stack+0x24/0x80
[ +0.000008] dump_stack_lvl+0x98/0xd4
[ +0.000011] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000007] kasan_report+0xb8/0xfc
[ +0.000008] __asan_report_load8_noabort+0x3c/0x50
[ +0.000010] __list_del_entry_valid+0xe0/0x1a0
[ +0.000009] drm_atomic_private_obj_fini+0x30/0x200 [drm]
[ +0.000172] drm_bridge_detach+0x94/0x260 [drm]
[ +0.000145] drm_encoder_cleanup+0xa4/0x290 [drm]
[ +0.000144] drm_mode_config_cleanup+0x118/0x740 [drm]
[ +0.000143] drm_mode_config_init_release+0x1c/0x2c [drm]
[ +0.000144] drm_managed_release+0x170/0x414 [drm]
[ +0.000142] drm_dev_put.part.0+0xc0/0x124 [drm]
[ +0.000143] drm_dev_put+0x20/0x30 [drm]
[ +0.000142] meson_drv_unbind+0x1d8/0x2ac [meson_drm]
[ +0.000028] take_down_aggregate_device+0xb0/0x160
[ +0.000016] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000015] platform_remove+0x64/0xb0
[ +0.000009] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000009] driver_unregister+0x70/0xb0
[ +0.000008] platform_driver_unregister+0x20/0x2c
[ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000012] __do_sys_delete_module+0x288/0x400
[ +0.000011] __arm64_sys_delete_module+0x5c/0x80
[ +0.000009] invoke_syscall+0x74/0x260
[ +0.000009] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000012] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000018] Allocated by task 0:
[ +0.000007] (stack is not available)
[ +0.000011] Freed by task 2695:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000011] kasan_set_track+0x2c/0x40
[ +0.000008] kasan_set_free_info+0x28/0x50
[ +0.000009] ____kasan_slab_free+0x128/0x1d4
[ +0.000008] __kasan_slab_free+0x18/0x24
[ +0.000007] slab_free_freelist_hook+0x108/0x230
[ +0.000011] kfree+0x110/0x35c
[ +0.000008] release_nodes+0xf0/0x16c
[ +0.000009] devres_release_group+0x180/0x270
[ +0.000008] component_unbind+0x128/0x1e0
[ +0.000010] component_unbind_all+0x1b8/0x264
[ +0.000009] meson_drv_unbind+0x1a0/0x2ac [meson_drm]
[ +0.000025] take_down_aggregate_device+0xb0/0x160
[ +0.000009] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000012] platform_remove+0x64/0xb0
[ +0.000008] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000008] driver_unregister+0x70/0xb0
[ +0.000008] platform_driver_unregister+0x20/0x2c
[ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000011] __do_sys_delete_module+0x288/0x400
[ +0.000010] __arm64_sys_delete_module+0x5c/0x80
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000014] The buggy address belongs to the object at ffff000020c39000
which belongs to the cache kmalloc-4k of size 4096
[ +0.000008] The buggy address is located 1504 bytes inside of
4096-byte region [ffff000020c39000, ffff000020c3a000)
[ +0.000016] The buggy address belongs to the physical page:
[ +0.000009] page:fffffc0000830e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20c38
[ +0.000013] head:fffffc0000830e00 order:3 compound_mapcount:0 compound_pincount:0
[ +0.000008] flags: 0xffff00000010200(slab|head|node=0|zone=0|lastcpupid=0xffff)
[ +0.000019] raw: 0ffff00000010200 fffffc0000fd4808 fffffc0000126208 ffff000000002e80
[ +0.000009] raw: 0000000000000000 0000000000020002 00000001ffffffff 0000000000000000
[ +0.000008] page dumped because: kasan: bad access detected
[ +0.000011] Memory state around the buggy address:
[ +0.000008] ffff000020c39480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ffff000020c39500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] >ffff000020c39580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ^
[ +0.000007] ffff000020c39600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ffff000020c39680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000006] ==================================================================
The reason this is happening is unloading meson-dw-hdmi will cause the
component API to take down the aggregate device, which in turn will cause
all devres-managed memory to be freed, including the struct dw_hdmi
allocated in dw_hdmi_probe. This struct embeds a struct drm_bridge that is
added at the end of the function, and which is later on picked up in
meson_encoder_hdmi_init.
However, when attaching the bridge to the encoder created in
meson_encoder_hdmi_init, it's linked to the encoder's bridge chain, from
where it never leaves, even after devres_release_group is called when the
driver's components are unbound and the embedding structure freed.
Then, when calling drm_dev_put in the aggregate driver's unbind function,
drm_bridge_detach is called for every single bridge linked to the encoder,
including the one whose memory had already been deallocated.
Fix by calling component_unbind_all after drm_dev_put.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919010940.419893-2-adrian.larumbe@collabora.com
|
|
Add comments on the lt8912_write_lvds_config() config to document the
current settings and to make it clear that this is a hardcoded
configuration not relevant for the HDMI output (could be removed without
affecting the HDMI port).
No changes on the actual register writes.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-5-dev@pschenker.ch
|
|
Correct I2C address for the register list in lt8912_write_lvds_config(),
these registers are on the first I2C address (0x48), the current
function is just writing garbage to the wrong registers and this creates
multiple issues (artifacts and output completely corrupted) on some HDMI
displays.
Correct I2C address comes from Lontium documentation and it is the one
used on other out-of-tree LT8912B drivers [1].
[1] https://github.com/boundarydevices/linux/blob/boundary-imx_5.10.x_2.0.0/drivers/video/lt8912.c#L296
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-4-dev@pschenker.ch
|
|
The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads
from EDID what the display needs and sets it accordingly.
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-3-dev@pschenker.ch
|
|
Currently the bridge driver does not take care whether or not the display
needs positive/negative vertical/horizontal syncs. Pass these two flags
to the bridge from the EDID that was read out from the display.
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-2-dev@pschenker.ch
|
