summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2022-07-08drm/tegra: Implement stream ID related callbacks on enginesMikko Perttunen
Implement the get_streamid_offset and can_use_memory_ctx callbacks required for supporting context isolation. Since old firmware on VIC cannot support context isolation without hacks that we don't want to implement, check the firmware binary to see if context isolation should be enabled. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-07-08drm/tegra: Support context isolationMikko Perttunen
For engines that support context isolation, allocate a context when opening a channel, and set up stream ID offset and context fields when submitting a job. As of this commit, the stream ID offset and fallback stream ID are not used when context isolation is disabled. However, with upcoming patches that enable a full featured job opcode sequence, these will be necessary. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-07-08drm/tegra: nvdec: Fix TRANSCFG register offsetMikko Perttunen
NVDEC's TRANSCFG register is at a different offset than VIC. This becomes a problem now when context isolation is enabled and the reset value of the register is no longer sufficient. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-07-08drm/tegra: falcon: Set DMACTX field on DMA transactionsMikko Perttunen
The DMACTX field determines which context, as specified in the TRANSCFG register, is used. While during boot it doesn't matter which is used, later on it matters and this value is reused by the firmware. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-07-08gpu: host1x: Program context stream ID on submissionMikko Perttunen
Add code to do stream ID switching at the beginning of a job. The stream ID is switched to the stream ID specified by the context passed in the job structure. Before switching the stream ID, an OP_DONE wait is done on the channel's engine to ensure that there is no residual ongoing work that might do DMA using the new stream ID. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-07-08gpu: host1x: Add context device management codeMikko Perttunen
Add code to register context devices from device tree, allocate them out and manage their refcounts. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-07-08Revert "drm/amdgpu: add drm buddy support to amdgpu"Arunpravin Paneer Selvam
This reverts commit c9cad937c0c58618fe5b0310fd539a854dc1ae95. This is part of a revert of the following commits: commit 708d19d9f362 ("drm/amdgpu: move internal vram_mgr function into the C file") commit 5e3f1e7729ec ("drm/amdgpu: fix start calculation in amdgpu_vram_mgr_new") commit c9cad937c0c5 ("drm/amdgpu: add drm buddy support to amdgpu") [WHY] Few users reported garbaged graphics as soon as x starts, reverting until this can be resolved. Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220708093047.492662-3-Arunpravin.PaneerSelvam@amd.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2022-07-08drm/lima: Migrate to dev_pm_opp_set_config()Viresh Kumar
The OPP core now provides a unified API for setting all configuration types, i.e. dev_pm_opp_set_config(). Lets start using it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-08OPP: Make dev_pm_opp_set_regulators() accept NULL terminated listViresh Kumar
Make dev_pm_opp_set_regulators() accept a NULL terminated list of names instead of making the callers keep the two parameters in sync, which creates an opportunity for bugs to get in. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Steven Price <steven.price@arm.com> # panfrost Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-07drm/amd/display: clean up some inconsistent indentingYang Li
Eliminate the follow smatch warnings: drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:405 get_bios_object_from_path_v3() warn: inconsistent indenting drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:611 bios_parser_get_hpd_info() warn: inconsistent indenting drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:818 bios_parser_get_device_tag() warn: inconsistent indenting drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:1599 bios_parser_is_device_id_supported() warn: inconsistent indenting Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amd/display: fix non-x86/PPC64 compilationAlex Deucher
Need to protect FP DMCUB code with CONFIG_DRM_AMD_DC_DCN. Fixes build failures like the following on arm64: ERROR: modpost: "__floatunsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__divdf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "fma" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__adddf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__fixdfsi" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__muldf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__floatsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: modpost: "__fixunsdfsi" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! Fixes: 85f4bc0c333c ("drm/amd/display: Add SubVP required code") Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amd/display: Fix new dmub notification enabling in DMStylon Wang
[Why] Changes from "Fix for dmub outbox notification enable" need to land in DM or DMUB outbox notification would be disabled. [How] Enable outbox notification only after interrupt are enabled and IRQ handlers registered. Any pending notification will be sent by DMUB once outbox notification is enabled. Fixes: ed7208706448 ("drm/amd/display: Fix for dmub outbox notification enable") Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amdgpu: Fix one list corruption when create queue failsxinhui pan
Queue would be freed when create_queue_cpsch fails So lets do queue cleanup otherwise various list and memory issues happen. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/radeon: avoid bogus "vram limit (0) must be a power of 2" warningMateusz Jończyk
I was getting the following message on boot on Linux 5.19-rc5: radeon 0000:01:05.0: vram limit (0) must be a power of 2 (I didn't use any radeon.vramlimit commandline parameter). This is caused by commit 8c2d34eb53b9 ("drm/radeon: use kernel is_power_of_2 rather than local version") which removed radeon_check_pot_argument() and converted its users to is_power_of_2(). The two functions differ in its handling of 0, which is the default value of radeon_vram_limit: radeon_check_pot_argument() "incorrectly" considered it a power of 2, while is_power_of_2() does not. An appropriate conditional silences the warning message. It is not necessary to add a similar test to other callers of is_power_of_2() in radeon_device.c. The matching commit in amdgpu: commit 761175078466 ("drm/amdgpu: use kernel is_power_of_2 rather than local version") is unaffected by this bug. Tested on Radeon HD 3200. Not ccing stable, this is not serious enough. Fixes: 8c2d34eb53b9 ("drm/radeon: use kernel is_power_of_2 rather than local version") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amd/display: remove repeated includesGuo Zhengkui
Remove a repeated "#include <drm/drm_print.h>" Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amdgpu/display: Remove duplicated argument to ||Zhongjun Tan
Remove duplicated argument to || Signed-off-by: Zhongjun Tan <tanzhongjun@coolpad.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amd/display: make get_refresh_rate() staticAlex Deucher
It's not used outside of dcn30_resource.c. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amd/display: remove set but unused variableAlex Deucher
Fixes the following: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hwseq.c:428:33: warning: variable 'old_pipe' set but not used Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amdkfd: optimize svm range evictEric Huang
It is to avoid unnecessary queue eviction when range is not mapped to gpu. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amd/display: correct idle_power_optimizations disablement return valueEvan Quan
[Why] The return value indicates whether the operation(disable/enable) succeeded or not. The existing logic reports wrong result even if the disablement was performed successfully. That will make succeeding reenablement abandoned as dc->idle_optimizations_allowed is always true. [How] Correct the return value to reflect the real result of disablement. Fixes: 235c67634230 ("drm/amd/display: add DCN32/321 specific files for Display Core") Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amd/display: remove stale debug settingAurabindo Pillai
[Why&How] The debug option to disable idle power optimization can be dropped Fixes: 235c67634230 ("drm/amd/display: add DCN32/321 specific files for Display Core") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amdkfd: change svm range evictEric Huang
Adding always evict queues when flag is set to KFD_IOCTL_SVM_FLAG_GPU_ALWAYS_MAPPED as if XNACK off. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/msm/mdp5: Fix global state lock backoffRob Clark
We need to grab the lock after the early return for !hwpipe case. Otherwise, we could have hit contention yet still returned 0. Fixes an issue that the new CONFIG_DRM_DEBUG_MODESET_LOCK stuff flagged in CI: WARNING: CPU: 0 PID: 282 at drivers/gpu/drm/drm_modeset_lock.c:296 drm_modeset_lock+0xf8/0x154 Modules linked in: CPU: 0 PID: 282 Comm: kms_cursor_lega Tainted: G W 5.19.0-rc2-15930-g875cc8bc536a #1 Hardware name: Qualcomm Technologies, Inc. DB820c (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_modeset_lock+0xf8/0x154 lr : drm_atomic_get_private_obj_state+0x84/0x170 sp : ffff80000cfab6a0 x29: ffff80000cfab6a0 x28: 0000000000000000 x27: ffff000083bc4d00 x26: 0000000000000038 x25: 0000000000000000 x24: ffff80000957ca58 x23: 0000000000000000 x22: ffff000081ace080 x21: 0000000000000001 x20: ffff000081acec18 x19: ffff80000cfabb80 x18: 0000000000000038 x17: 0000000000000000 x16: 0000000000000000 x15: fffffffffffea0d0 x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47 x11: ffff80000a386aa8 x10: 0000000000000029 x9 : ffff80000cfab610 x8 : 0000000000000029 x7 : 0000000000000014 x6 : 0000000000000000 x5 : 0000000000000001 x4 : ffff8000081ad904 x3 : 0000000000000029 x2 : ffff0000801db4c0 x1 : ffff80000cfabb80 x0 : ffff000081aceb58 Call trace: drm_modeset_lock+0xf8/0x154 drm_atomic_get_private_obj_state+0x84/0x170 mdp5_get_global_state+0x54/0x6c mdp5_pipe_release+0x2c/0xd4 mdp5_plane_atomic_check+0x2ec/0x414 drm_atomic_helper_check_planes+0xd8/0x210 drm_atomic_helper_check+0x54/0xb0 ... ---[ end trace 0000000000000000 ]--- drm_modeset_lock attempting to lock a contended lock without backoff: drm_modeset_lock+0x148/0x154 mdp5_get_global_state+0x30/0x6c mdp5_pipe_release+0x2c/0xd4 mdp5_plane_atomic_check+0x290/0x414 drm_atomic_helper_check_planes+0xd8/0x210 drm_atomic_helper_check+0x54/0xb0 drm_atomic_check_only+0x4b0/0x8f4 drm_atomic_commit+0x68/0xe0 Fixes: d59be579fa93 ("drm/msm/mdp5: Return error code in mdp5_pipe_release when deadlock is detected") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/492701/ Link: https://lore.kernel.org/r/20220707162040.1594855-1-robdclark@gmail.com
2022-07-07drm/msm: Make enable_eviction flag staticRob Clark
No need for it to be visible outside of this one src file. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/491219/ Link: https://lore.kernel.org/r/20220625225454.81039-3-robdclark@gmail.com
2022-07-07drm/ssd130x: Fix pre-charge period settingEzequiel Garcia
Fix small typo which causes the mask for the 'precharge1' setting to be used with the 'precharge2' value. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220706184133.210888-1-ezequiel@vanguardiasur.com.ar
2022-07-07drm/i915/selftests: Grab the runtime pm in shrink_thpChris Wilson
Since we are not holding a wakeref, shrinking a bound object is not guaranteed. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6370 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220706154738.235204-1-matthew.auld@intel.com
2022-07-07drm/msm/dp: delete vdda regulator related functions from eDP/DP controllerKuogee Hsieh
Vdda regulators are related to both eDP and DP phy so that it should be managed at eDP and DP phy driver instead of controller. This patch removes vdda regulators related functions out of eDP/DP controller. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1657038556-2231-4-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06drm/i915: Fix vm use-after-free in vma destructionThomas Hellström
In vma destruction, the following race may occur: Thread 1: Thread 2: i915_vma_destroy(); ... list_del_init(vma->vm_link); ... mutex_unlock(vma->vm->mutex); __i915_vm_release(); release_references(); And in release_reference() we dereference vma->vm to get to the vm gt pointer, leading to a use-after free. However, __i915_vm_release() grabs the vm->mutex so the vm won't be destroyed before vma->vm->mutex is released, so extract the gt pointer under the vm->mutex to avoid the vma->vm dereference in release_references(). v2: Fix a typo in the commit message (Andi Shyti) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5944 Fixes: e1a7ab4fca0c ("drm/i915: Remove the vm open count") Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.con> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220620123659.381772-1-thomas.hellstrom@linux.intel.com (cherry picked from commit 1926a6b75954fc1a8b44d10bd0c67db957b78cf7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-07-06drm/i915/guc: ADL-N should use the same GuC FW as ADL-SDaniele Ceraolo Spurio
The only difference between the ADL S and P GuC FWs is the HWConfig support. ADL-N does not support HWConfig, so we should use the same binary as ADL-S, otherwise the GuC might attempt to fetch a config table that does not exist. ADL-N is internally identified as an ADL-P, so we need to special-case it in the FW selection code. Fixes: 7e28d0b26759 ("drm/i915/adl-n: Enable ADL-N platform") Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220621233005.3952293-1-daniele.ceraolospurio@intel.com (cherry picked from commit 971e4a9781742aaad1587e25fd5582b2dd595ef8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-07-06drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()Hangyu Hua
If drm_connector_init fails, intel_connector_free will be called to take care of proper free. So it is necessary to drop the refcount of port before intel_connector_free. Fixes: 091a4f91942a ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.com Signed-off-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit cea9ed611e85d36a05db52b6457bf584b7d969e2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-07-07drm: rcar-du: Lift z-pos restriction on primary plane for Gen3Laurent Pinchart
There's no reason to require the primary plane to always be at the bottom of the stack, as the VSP supports arbitrary ordering of planes, and the KMS API doesn't have such a requirement either. Lift the restriction. As the primary plane can now be positioned arbitrarily, enable control of its alpha channel as well. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Tomohito Esaki <etom@igel.co.jp>
2022-07-07drm: rcar-du: Fix Alpha blending issue on Gen3LUU HOAI
As per R-Car-Gen3_Common_OPC_Customer_Notifications_V30.1.pdf, unexpected image output(such as incorrect colors or planes being invisible) can happen on the below conditions, as PnALPHAR register is not initialized by reset. When alpha blending (PpMRm.PpSPIM=0b101) is performed and: •two Planes are enabled on any DUn (n=0,1,2,3) oDSPRn= 0x0000 0031 or 0x0000 0013 •or DU0 and DU1 is used for display at the same time oDSPR0= 0x0000 0001 and DSPR1= 0x0000 0003 oDSPR0= 0x0000 0003 and DSPR1= 0x0000 0001 •or DU2 and DU3(H3 Only) is used for display at the same time oDSPR2= 0x0000 0001 and DSPR3= 0x0000 0003 oDSPR2= 0x0000 0003 and DSPR3= 0x0000 0001 This patch set PnALPHAR register to 0 to avoid this issue. Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2022-07-07drm: rcar-du: Add num_rpf to struct rcar_du_device_infoBiju Das
Number of RPF's VSP is different on R-Car and RZ/G2L R-Car Gen3 -> 5 RPFs R-Car Gen2 -> 4 RPFs RZ/G2L -> 2 RPFs Add num_rpf to struct rcar_du_device_info to support later SoC without any code changes. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2022-07-07drm: rcar-du: Drop file name from comment header blocksLaurent Pinchart
The comment blocks at the beginning of each file have a one-line summary description of the file that includes the file name. While the description is useful, the file name only creates opportunities for mistakes (as seen in rcar_du_vsp.c) without any added value. Drop it. Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2022-07-07drm: rcar-du: Extend CMM HDSE documentationKieran Bingham
When the CMM is enabled, the HDSE offset is further adjusted to compensate for consumed pixels. Explain this further, with an extra comment at the point the offset is adjusted. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2022-07-06drm/amdgpu/display: disable prefer_shadow for generic fb helpersAlex Deucher
Seems to break hibernation. Disable for now until we can root cause it. Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216119 Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-06drm/amdgpu: keep fbdev buffers pinned during suspendAlex Deucher
Was dropped when we converted to the generic helpers. Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-06drm/msm: Switch to pfn mappingsRob Clark
I'm not entirely sure why we were using VM_MIXEDMAP. These are never CoW mappings. Let's switch to be more consistent with what other drivers and the GEM shmem helpers do. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/491218/ Link: https://lore.kernel.org/r/20220625225454.81039-2-robdclark@gmail.com
2022-07-06drm/msm: Deprecate MSM_BO_UNCACHED harderRob Clark
Handle the demotion to MSM_BO_WC at the userspace ABI level, and fix the remaining internal MSM_BO_UNCACHED user. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489339/ Link: https://lore.kernel.org/r/20220613194623.2588353-1-robdclark@gmail.com
2022-07-06drm/msm/adreno: Defer enabling runpm until hw_init()Rob Clark
To avoid preventing the display from coming up before the rootfs is mounted, without resorting to packing fw in the initrd, the GPU has this limbo state where the device is probed, but we aren't ready to start sending commands to it. This is particularly problematic for a6xx, since the GMU (which requires fw to be loaded) is the one that is controlling the power/clk/icc votes. So defer enabling runpm until we are ready to call gpu->hw_init(), as that is a point where we know we have all the needed fw and are ready to start sending commands to the coproc's. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489337/ Link: https://lore.kernel.org/r/20220613182036.2567963-1-robdclark@gmail.com
2022-07-06drm/msm/gem: Drop obj lock in msm_gem_free_object()Rob Clark
The only reason we grabbed the lock was to satisfy a bunch of places that WARN_ON() if called without the lock held. But this angers lockdep which doesn't realize no one else can be holding the lock by the time we end up destroying the object (and sees what would otherwise be a locking inversion between reservation_ww_class_mutex and fs_reclaim). Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/14 Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489364/ Link: https://lore.kernel.org/r/20220613205032.2652374-1-robdclark@gmail.com
2022-07-06drm/msm/dp: remove dp_display_en/disable prototypes and data argumentDmitry Baryshkov
Remove unused dp_display_en/disable prototypes. While we are at it, remove extra 'data' argument that is unused. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/490104/ Link: https://lore.kernel.org/r/20220617232434.1139950-3-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dp: rename second dp_display_enable()'s argumentDmitry Baryshkov
To follow up recent changes, rename (and change type of) second dp_display_enable()'s argument from generic u32 data to bool force_link_train, which is later passed to dp_ctrl_on_stream(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/490102/ Link: https://lore.kernel.org/r/20220617232434.1139950-2-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dp: remove unused stubsDmitry Baryshkov
Refactoring DP code transformed several functions into empty stubs. Remove them. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/490100/ Link: https://lore.kernel.org/r/20220617232434.1139950-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/adreno: Do not propagate void return valuesGeert Uytterhoeven
With sparse ("make C=2"), lots of error: return expression in void function messages are seen. Fix this by removing the return statements to propagate void return values. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Patchwork: https://patchwork.freedesktop.org/patch/492529/ Link: https://lore.kernel.org/r/0083bc7e23753c19902580b902582ae499b44dbf.1657113388.git.geert@linux-m68k.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/gpu: Add GEM debug label to devcoreRob Clark
When trying to understand an iova fault devcore, once you figure out which buffer we accessed beyond the end of, it is useful to see the buffer's debug label. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/491910/ Link: https://lore.kernel.org/r/20220629211919.563585-3-robdclark@gmail.com
2022-07-06drm/msm/gpu: Capture all BO addr+size in devcoreRob Clark
It is useful to know what buffers userspace thinks are associated with the submit, even if we don't care to capture their content. This brings things more inline with $debugfs/rd cmdstream dumping. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/491908/ Link: https://lore.kernel.org/r/20220629211919.563585-2-robdclark@gmail.com
2022-07-06drm/msm: switch msm_kms_init_aspace() to use device_iommu_mapped()Dmitry Baryshkov
Change msm_kms_init_aspace() to use generic function device_iommu_mapped() instead of the fwnode-specific interface dev_iommu_fwspec_get(). While we are at it, stop referencing platform_bus_type directly and use the bus of the IOMMU device. Suggested-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489703/ Link: https://lore.kernel.org/r/20220616081106.350262-6-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm: move KMS aspace init to the separate helperDmitry Baryshkov
MDP5 and DPU drivers have the same piece of code now to initialize IOMMU and GEM address space. Move it to the msm_drv.c Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489701/ Link: https://lore.kernel.org/r/20220616081106.350262-5-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm: Stop using iommu_present()Dmitry Baryshkov
Even if some IOMMU has registered itself on the platform "bus", that doesn't necessarily mean it provides translation for the device we care about. Replace iommu_present() with a more appropriate check. On Qualcomm platforms the IOMMU can be specified either for the MDP/DPU device or for its parent MDSS device depending on the actual platform. Check both of them, since that is how both DPU and MDP5 drivers work. Co-developed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/489699/ Link: https://lore.kernel.org/r/20220616081106.350262-4-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit (git 2.34.1) at 2025-10-01 20:06:32 +0000